Used Heller Mch 250 for sale (66)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840D, spindle speed (max.): 12,500 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 800 mm Spindle speed: 12,500 rpm Number of axes: 4 Pallet size: 630 × 630 mm Max. tool length: 600 mm Pedpfozncnkex Akljgp MACHINE DETAILS Control system: Siemens 840D

Condition: good (used), Year of construction: 2004, For sale CNC Horizontal Machining Center HELLER MCH 250 with Robot (YASKAWA GP50 Robot) – Siemens 840D 4-axis For sale, a high-productivity production cell / robotic island including a HELLER MCH 250 horizontal machining center with pallet changer, fully automated with a YASKAWA Motoman GP50 loading/handling robot and its secure loading cell. Complete set, ideal for high-volume production, intensive machining of automotive, aerospace, or precision mechanical parts with automated operation / without human presence. 1. Specifications of the HELLER MCH 250 Machining Center: Brand: HELLER (Gebr. Heller Maschinenfabrik GmbH) Model: MCH 250 Year of manufacture: 2004 Numerical Control (CNC): SIEMENS Sinumerik 840D Order / serial number: 32-46258 Power supply: 400 V / 50 Hz / 123 A Included equipment: 4 axes Automatic pallet changer Large capacity tool magazine (chain / upper matrix type) Chip conveyor with KNOLL high-pressure filtration / coolant unit 2. Specifications of the YASKAWA Loading Robot: Brand: YASKAWA Electric Corporation Robot Model: MOTOMAN-GP50 Type: YR-106VX50-A00 Year of manufacture: August 2018 Load capacity (Payload): 50 kg Robot weight: 570 kg Pgedpfszpzyzsx Aklsp Robot cell equipment: Specific gripper / clamp Gravity-fed / drawer part station / storage unit Complete protective enclosure with housing and CE safety grilles Machines disconnected and sold as is.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2006. It features a maximum spindle speed of 6000 rpm and a robust tool capacity of 100 tools in the automatic tool changer. The machine is equipped with twin pallets, enhancing productivity and efficiency. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • Twin pallet Pedpfx Ajy H D T Usklogp Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2007. It features a spindle speed of 6000 rpm and a BT50 tool holder. The machine is equipped with an automatic tool changer that holds 100 tools, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • 4th axis rotary table, 1-degree indexing • Probe (workpiece/tool probing system) Pgedsy Epfvopfx Aklop Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2005. It features an XYZ travel of 800 x 800 x 800 mm and a pallet size of 630 x 630 mm. The machine is equipped with a 100-tool automatic tool changer and a 6-pallet pool for enhanced productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • Pallet size: 630 x 630 • Tool magazine: 100 ATC • 4th axis: 360° Podpoy Egbrofx Aklogp Additional equipment • 6x pallet pool • Probe Technical Specification Taper Size SK 50

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Pjdpfx Asuxdhueklsgp

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, controller model: Siemens 840D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,100 mm Psdpfjzncndjx Aklsgp Spindle speed: 8,000 rpm Pallet size: 630 × 630 mm Rotary table: 360,000 × 0.001° Tool positions: 400 Tool interface: HSK 100 Number of machining axes: 5 MACHINE DETAILS Control system: Siemens 840D

Condition: used, Year of construction: 2006, operating hours: 48,659 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, Control unit: Siemens 840D PL Spindle: 7.000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Tool magazine & places: Rack 234 / Chain 50 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 50 bar, (work area flushing) Positioning range XYZ (mm): 1250 / 1000 / 1000 Pgodpjug T E Asfx Aklep Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additonal options: Infrared receiver for measuring probe (BLUM); Interface for attachment heads; fast drill fracture sensing (SBBK); codechip tool; Runtime and quantity recording; intergrated prozess monitoring IPM; Screen blow-off device for operator door; alternative strategy; toolplaning with MCIS TDI;

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment • Pallets: 22 of size 800x800 Machine Benefits Technical Machine Benefits • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 Pgodpfx Akox D Skmslep • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours

Condition: used, Year of construction: 1955, saw blade diameter 70 - 230 mm sawblade width 12 mm hole of sawblade 10 - 50 mm grinding wheel diameter 120 mm grinding wheel width 6 mm grinding wheel hole diameter 32 mm no. of teeth 30 - 400 total power requirement 0,33 kW weight of the machine ca. 350 kg dimensions of the machine ca. 0,80 x 0,70 x 1,70 m Pgedpetqqk Nefx Aklsp

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 52, number of axes: 4, This 4-axis HELLER MCP 250 was manufactured in 2000. It features a maximum spindle speed of 6000 rpm and an automatic tool changer with 52 positions. The machine is equipped with twin pallets and offers an XYZ travel of 800 x 800 x 710 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MCP 250 horizontal machining centre we have for sale. Contact us for further details. • Automatic tool changer (ATC): 52 tools Additional equipment • Twin pallet changer Pedpfx Aey Ef D Eskljgp Technical Specification Taper Size SK 50

Condition: good (used), Year of construction: 2004, functionality: fully functional, Control: Siemens 840 D Travel distance X-axis: 1,000 mm Travel distance Y-axis: 800 mm Travel distance Z-axis: 800 mm Tool changer: 80-fold Pgedpfx Aoy Nzh Uoklsp Tool holder: HSK 80 Max. tool weight: 25 kg Max. tool length: 500 mm Max. tool diameter: 228 mm Spindle speed up to: 6,000 rpm Pallet dimensions: 630 x 630 mm

Condition: used, Year of construction: 2002, Technical details: Podpjw T Tntofx Aklegp x-travel: 1000 mm y-travel: 800 mm z-travel: 1100 mm weight of the machine ca.: 20 t dimensions of the machine ca.: 6,80 x 3,0 x 3,20 m Tool bore: SK50 Tool taper: HSK-A 100 turning speed range: 45-6.000 U/min size of pallet: 630x800 mm change time of pallets: 21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to *

Condition: used, Year of construction: 2007, operating hours: 40,933 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840D PL, table width: 630 mm, table length: 630 mm, spindle speed (max.): 8,000 rpm, number of spindles: 1, Machine name / type: HELLER / MCH 280 C Operating hours: 40.933h Year of construction: 2007 Control unit: Siemens 840D PL Spindle: 8.000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Tool magazine / places (Options): Rack / 234 (Operating panel at the tool loading station with terminal) Rotary table: 360.000° X 0,001° Pjdpfsxwpmxsx Akljgp Coolant unit: KNOLL, VRF 250, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 100 / 1000 / 1000 Pallet size (mm): 630 X 630 Workpiece clamping: mechanical Additonal options: Receiver for measuring probe (RENISHAW); interface exhaust system; additional weight for pallets; drill fracture sensing; status lamp; interface exhaust system; integrated tool and collision monitoring; toolshaft cleaning; tool codechip; Interface handheld;

Condition: used, Year of construction: 2019, operating hours: 15,551 h, functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Operating hours: 15,551 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Psdpewgm Hkjfx Akljgp Cross stroke X-/U-axis mm 180 / 180 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 700 Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Chuck diameter up to 260 mm Workpiece spindle bearing diameter in the front bearing: 170 mm Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Pgjdjzdpvgepfx Aklsp Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: used, Year of construction: 2017, turning length: 500 mm, spindle motor power: 30,000 W, General Year of manufacture: 2017 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 500 mm Maximum cutting radius mm 200 Stroke over center mm 25 Maximum clamping diameter mm 100 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 602 Longitudinal stroke Z-/W-axis mm 602 / 602 Cross stroke X-axis mm 140 Cross stroke X-/U-axis mm 140 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 230 Tool holder Quick-change system Bearing diameter of tool drum in the front bearing mm 660 * 790 Chuck holder Cylindrical mm 180 Chuck diameter up to mm 260 Workpiece spindle bearing diameter in the front bearing mm 170 Guidance system for machining units Rolling guides with rollers, size 45 Feed drives Cross slide adjustment W-axis, Z-axis 100% duty cycle Nm 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm 18 / 18 Steady Z3-axis 100% duty cycle Nm 10.5 Vise right Z4-axis 100% duty cycle Nm 10.5 Circular feed workpiece C21- axis, C22-axis 100% duty cycle Nm 18 / 18 Axis speed Feed/rapid traverse speed longitudinal W-, Z-, and Z3-axes m/min 0 - 40 Feed/rapid traverse speed transverse U-axis, X-axis m/min 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) m/min 0 - 40 Circular feed of workpiece C21-axis, C22-axis rpm 0 - 60 Cutter drive Pgodpfxowgndke Aklep Power per unit (nominal / maximum) kW 15 / 30 Cutting speed m/min 120 - 255 Tool torque Nm 1500

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 8,000 rpm, coolant supply: 200 bar, spindle motor power: 43,000 W, number of spindles: 1, number of slots in tool magazine: 50, Equipment: chip conveyor, documentation/manual, Year of manufacture: 2012 Control system: Siemens 840D SL Spindle: PC unit, 8000 rpm, 43 kW, 822 Nm Tool clamping system: SK 50 Magazine / positions (options): Chain / 50 Rotary table: 360,000° x 0.001° Coolant system: KNOLL, KF 200, internal coolant pressure 50 bar, (work area flushing) Working area XYZ (mm): 800 / 800 / 800 Pallet size (mm): 500 x 400 Workpiece clamping: Hydraulic, 200 bar Additional options, special features: Receiver for wireless measuring probe (Renishaw); Fast drill break detection (SBBK); Pneumatic support control at the workpiece setup station; 4th line in the work area; Interface for robot loading; Integrated process monitoring (IPM); Evasion strategy; Interface for extraction. Pgodpozpyinjfx Akljp

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, Year of manufacture: 2012 Control system: Siemens 840D SL Pjdpfozpyg Tex Aklegp Spindle: SC63, 16,000 rpm, 40 kW, 96 Nm Tool clamping system: HSK 63 Tool magazine / positions (options): Chain / 54 Rotary table: 360,000° x 0.001° Coolant system: KNOLL, VRF 250, IKZ 50 bar, (work area flushing) Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Hydraulic, 60 bar Additional options, special features: Infrared receiver for measuring probe (RENISHAW); SBBK; Pneumatic support control at the workpiece setup station; Status indicator light; Chip conveyor for wet machining;

Condition: used, Year of construction: 2016, operating hours: 60,000 h, functionality: fully functional, Heller FMS with 2 x H2000 Machine make / type: HELLER H2000 Operating hours: 59,654 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: PC63 10,000 rpm, 38 kW, 242 Nm Tool clamping system: SK40 Magazine / locations: Chain magazine / 160 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make / type: HELLER H2000 Operating hours: 60,546 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: SC63 16,000 rpm, 40 kW, 96 Nm Pgsdpfxswbt Rrj Aklep Tool clamping system: SK40 Magazine / locations: Chain magazine / 240 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make/type FASTEMS FPC750 with expansion container Operating hours: No counter installed Year of manufacture: 2016 Control system: FASTEMS Memory locations: 24 memory locations, 2 setup stations Workpiece clamping: Mechanical Additional options, special features: 20 pallets included Further information and technical specifications upon request.

Condition: like new (used), Year of construction: 2022, operating hours: 19,220 h, functionality: fully functional, Upon request, you will receive the extensive photo collection of the machine. Upon further inquiry, video recordings of the machine in full working order will also be provided. Manufacturer: HELLER Model: CP 6000 Year of manufacture: 2022 Machine type: Horizontal 5-axis milling-turning center Control system: Siemens SINUMERIK 840D sl Tool interface: HSK-T 100 Technical data: Travel in X-axis: 1,000 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 1,300 mm Pallet size: 630 x 630 mm Max. pallet load: approx. 1,400 kg Max. workpiece diameter: 1,000 mm Max. workpiece diameter with limited Z-axis travel: 1,580 mm Max. workpiece height: 1,200 mm Number of axes: 5 Machining: 5-sided and 5-axis simultaneous machining Turning machining: horizontal, vertical and angled Rotary table: directly driven torque rotary table Rotary table axis: 360° continuous Pallet changer: integrated, automatic Spindle: Pjdpfx Akszmn Adoljgp Spindle design: PCU 100 PowerCuttingUniversal Tool interface: HSK-T 100 Max. spindle speed: approx. 8,000 rpm Max. spindle power: approx. 60 kW Max. torque: approx. 1,146 Nm Spindle lock for turning machining Swivel range of the spindle head: approx. +15° to -190° Tool magazine: Tool positions: 340 Max. tool diameter: approx. 280 mm with free adjacent positions Max. tool length: approx. 600 mm Max. tool weight: approx. 25 kg Automatic tool changer Equipment: Siemens SINUMERIK 840D sl CNC control system Integrated pallet changer 5-axis simultaneous machining Milling, drilling, threading and turning machining Directly driven torque rotary table KNOLL coolant and filter system Chip conveyor Mobile chip container Work area and/or oil mist extraction Work area flushing Separate operator and operating data terminals Dimensions of the base machine: Length: approx. 7,750 mm Width: approx. 5,450 mm Height: approx. 4,400 mm Brief description: Universal horizontal 5-axis milling-turning center for complete machining of complex workpieces in a single setup. The HELLER CP 6000 enables powerful milling, drilling and turning operations as well as horizontal, vertical and angled turning machining. Equipped with Siemens SINUMERIK 840D sl, HSK-T-100 spindle, directly driven torque rotary table, integrated pallet changer and KNOLL coolant and chip handling system. All technical data are approximate and non-binding. Subject to errors, changes and prior sale.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control system: Siemens 840D-SL Tool positions: 160 Tool holder: HSK 63 Spindle speed: 10,000 rpm / 242 Nm Pallet size: 630 x 500 mm Number of pallets: 2 X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Pedpfx Aszl Raioklegp Table load capacity: max. 1000 kg

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 630 mm z-travel 560 mm total power requirement 60 kW weight of the machine ca. 12.5 t dimensions of the machine ca. m H E L L E R (Germany) 5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _____ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Feeds / quick feeds XYZ 1 - 70,000 mm/min Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Psdpfx Ajt Hwrhjkljgp Weight, approx. 12,500 kg Accessories / Special Features * 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working operation on 5 sides. * Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto the table, where it is automatically clamped and machined. * 40-position tool magazine with tool replacement door, and laser-operated tool breakage control. * Internal high pressure coolant supply, 50 bar. * Coolant preparation unit with filter and temperature control. * Oil mist exhaust. * Separate cooling aggregate for motor spindle and switch cabinet. * CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area. Machine comes from the design department of an car manufacturer and was only used for trials. The new price in 1998 was approx. 1.3 million DM (EUR 650,000.00). The machine is very suitable for medium-sized production series. Ideal for aluminium.

Condition: used, Technical characteristics: Pedpfs Dvlxjx Aklegp HORIZONTAL MACHINING CENTER AUTOFEED 8 PALLETS 140 TOOL ISO50

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Pgodpfx Aksx Hn D Rslop Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.