Gantry milling machine

Hurco DCX 32-5Si

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, controller model: MAX 5, workpiece weight (max.): 11,000 kg, table width: 1,700 mm, table length: 3,000 mm, table load: 11,000 kg, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, We are offering the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose–table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position Hsdpfx Aezl Hbcjigjnt EQUIPMENT: - Internal cooling through spindle 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island recognition - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader. Hnsdpfx Aieydqpijget

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 18,000 rpm, table load: 11,000 kg, workpiece weight (max.): 11,000 kg, rotational speed (max.): 18,000 rpm, controller model: MAX 5, coolant supply: 40 bar, We offer the following machine directly on behalf of the owner. It was delivered in 2026 but, due to changing requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance between spindle nose and table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle, 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000-line look-ahead) - STEP and DXF import - Automatic pocket and island detection - Multi-touch Hsdpfx Aszu Nz Dsigont SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4304, rotary table diameter: 600 mm, grinding height: 450 mm, overall weight: 14,500 kg, Machine is equipped with 3 spindles, surface grinding, external grinding, bore grinding Hnsdpfx Aovt A Rtjiget Turret head B-axis with 1° division Belt filter system included

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, Hodpfx Ajzh Nczeigsnt 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), 37kW Spindle Motor, 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Hodpfxszb Evls Aigont Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. EXTERNAL TOOL COOLING Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable • User and maintenance manual and CE declaration of conformity

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,222 h, total height: 3,240 mm, overall weight: 8,880 kg, This 3-axis Hurco VMX 50i was manufactured in 2014, featuring a robust table size of 59 x 26 inches and a maximum spindle speed of 12,000 rpm. It supports a tool capacity of 40 with a rapid tool-to-tool ATC time of 2 seconds. Ideal for precise, heavy-duty machining with a maximum table load of 4,410 lb. If you are looking to get high-quality milling capabilities consider the Hurco VMX 50i machine we have for sale. Contact us for more information. • 30 slot tool magazine • Table Size: 1500 x 660 mm • T-Slots: 6 x 18 mm • Maximum Weight on Table: 2000 kg • Spindle Nose to Table: 101 mm • Maximum Spindle Speed: 12000 rpm • Spindle Power (15 min/Continuous): 15 kW / 11 kW @ 720 rpm • Spindle Torque (15 min/Continuous): 198.9 Nm / 116.7 Nm @ 720 rpm Hnedpfx Aox D E Eqoiget • Tool Type: CAT 40 / Big Plus® • Tool Capacity: 40 • Maximum Tool Diameter: 76 mm • Maximum Tool Length: 300 mm • Maximum Tool Weight: 7 kg • Tool-to-Tool ATC Time: 2 sec Dimensions Machine Depth 5055 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6860 0007, Please let us know your quote. Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain ----- Scope of delivery: Hedpfx Aievbgiiegsnt Machine, loading system, conveyor belt, workpiece carrier Machine specifications: 5-axis grinding center including oval feed belt and loading gantry 12-station tool changer with HSK 63 Max. X-axis travel: 500 mm Max. Y-axis travel: 650 mm Max. Z-axis travel: 650 mm Table size: 500 x 650 mm Cut-off detection Nordmann dressing spindle Oil supply via central factory supply

Condition: excellent (used), Year of construction: 2014, functionality: unexamined, workpiece weight (max.): 2,500 kg, total width: 3,200 mm, total length: 15,800 mm, distance between centers: 6,000 mm, workpiece diameter between centers: 850 mm, overall weight: 19,000 kg, We offer this very good Hol-Monta spol.sro UB 85 / 6000 CNC cylindrical grinding machine, year of construction 2014. Hnodpfxsy Hgrgj Aigot Model: UB 85 / 6000 CNC Control type: Kavalir K 51-2 Serial number: H 214 09 005 Swing dia. 850 mm Center distance 6 000 mm Internal Grinding attachment Steadyrests etc.

Year of construction: 2016, condition: ready for operation (used), Offered is a high-precision worm and thread grinding machine MIKROMAT 20G, used as a test and trial machine, nearly all available options included, technically flawless condition. Capabilities: external thread grinding, internal thread grinding, whirling Whirling, grinding length max. 2000mm, workpiece diameter max. 320mm, distance between centers: 2250mm NC tailstock option: 2050mm, workpiece weight max. 200kg 350kg NC tailstock, pitch range: 0-400mm, 7-axis system, feed speed: up to 15000mm/min, setting angle: +/-40°, positioning accuracy: uncertainty 0.0024mm P, upgrade to 23.5kW continuous power/45kW maximum power, grinding wheel speed: up to 50m/s, special equipment internal grinding: internal thread diameter up to 100mm, length up to 50mm, coolant system: KNOLL compact unit vacuum rotary filter, 2500l tank volume and oil cooling, installation dimensions X/Y/Z: approx. 6500mm/4000mm/3000mm, total weight: approx. 13000kg, inspection possible by arrangement. Hsdpfjylbr Dox Aigont