Used hydraulic single column presses 100-124t for sale (26)

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l Itedpfeyif Nrsx Ahpoi rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: used, Year of construction: 2012, machine/vehicle number: 154701, functionality: fully functional, pressing force: 100 t, stroke length: 500 mm, operating speed: 2 mm/s, table width: 600 mm, table length: 800 mm, ram plate width: 350 mm, ram plate length: 700 mm, oil tank capacity: 75 l, total height: 2,600 mm, overall weight: 2,050 kg, Equipment: documentation/manual, The machine is in good condition. The machine is also equipped with a linear measuring scale for length measurement, featuring a digital single-axis display. Isdpfx Aszkgvwohpoti The machine has seen only limited use. An on-site inspection can be arranged by appointment.

Condition: good (used), Year of construction: 1982, Hydraulic press JKM Kindsmüller UPS 100 E – 110 tons For sale: a hydraulic workshop/industrial press, JKM Kindsmüller, type UPS 100 E. Technical specifications: * Pressing force: 1100 kN (110 tons) * Operating pressure: 283 bar * Stroke of upper piston: 700 mm * Year of manufacture: 1982 Isdpfxoy Unl Re Ahpjti * Control system overhauled/renewed in 1992 * 400 V connection The machine can be inspected by arrangement.

Condition: used, functionality: fully functional, PRESSA IDRAULICA usata DA 100T SIMAC. Iodpfozh Epwox Ahpsti

Condition: new, Year of construction: 2025, functionality: fully functional, PRESSA IDRAULICA 100T LUCE 1000MM OMCN PISTONE MOBILE. Ijdpfxezhkwme Ahpjti

Condition: used, Year of construction: 1979, pressure 100 t stroke 500 mm table surface area 4000x500 mm weight of the machine ca. 5,7 t HY – S 100 RH MAE hydraulic straightening press, complete with straightening unit Year of manufacture: 1979 Approved in accordance with UVV Stroke: 500 mm Pressure capacity: 100 tonnes Itsdpjy Tpr Asfx Ahpoi Table: 4000 x 500 mm Weight: 5700 kg

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Ijdpfx Asyupuljhpsti Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 100 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 200 mm/s, table width: 750 mm, table length: 560 mm, ram plate width: 530 mm, ram plate length: 400 mm, total length: 1,900 mm, total width: 1,200 mm, total height: 3,200 mm, overall weight: 5,040 kg, Equipment: documentation/manual, Hydraulic press PYE 100 S1M with ejector. Manufacturer: Werkzeugmachinen GmbH Zeulenroda (Germany), year 1990. Specifications: Maximum pressing force 100 t. Operating pressure 16 MPa. Maximum ejector force 40 t. Ejector piston stroke 200 mm. Upper table 530x400 mm. Lower table 750x560 mm. Clear opening 800 mm. Cylinder stroke 500 mm. Downward speed 200 mm/s. Upward speed 200 mm/s. Power requirement 17 kW. Weight 5040 kg. Height 3200 mm, length 1900 mm, width 1200 mm. Iedpfsygtzyex Ahpoti

Condition: new, Year of construction: 2024, neu 2024 7305 prompt, Zwischenverkauf v Italien 46400 € 886.24 € 1 100 to 500 mm 700 x 350 mm 800 x 600 mm 500 mm 300 mm 25 mm/s 4 mm/s 4 kW 1900 mm 1200 mm 2600 mm 2100 kg 2-fold round guidance table and ram with T-slots Iodpfxowiry Ij Ahpoti 2 hand operation Siemens PLC manometer users manual incl. pressure switch

Condition: used, Year of construction: 2003, pressing force: 120 t, operating speed: 8 mm/s, overall weight: 12,000 kg, Hydraulic Press Brake Brand: Hidrogarne / Ermaksan Model: AP 4100-120 Year: 2003 Power: 11KW Weight: 12,000kg Bending length: 4100mm Force: 120t Approach speed: 80mm/s Working speed: 8mm/s Y-axis and X-axis back gauge control with ELGO control system. Itsdpfxox Tp Auj Ahpsi PROMECAM punch holder. Supplied with: - 4m one-piece die, 90x90mm with several V openings - 4m gooseneck punch, 90mm height, in 835mm sections and some additional smaller pieces - Also comes with sets of straight and 30-degree punches (see pallet photos of punches)

Year of construction: 1990, condition: good (used), Used Bemco 300ton C frame hydraulic press for sale Bed size 1200 x 900 Daylight 1150 Iedpfx Aeg S Uc Dohpsti Stroke 700 Cylinder dia 300 New c frame presses available for sale 30ton 60ton 100ton 150ton 200ton 250ton and 300ton

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Ijdjm Nntyopfx Ahpoti Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, pressure: 100motor: 11daylight: 500stroke lenght (max.): 400Tappet adjustment: 790 x 600table height: Fußboden zu Tischplatte Oberkannte - 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 barControl / Key Switch Modes:Setup Mode – Manual operation without light sensor Automatic Mode – Full speed with integrated light sensor Hydraulic System:Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 pcs, Ø 50 x 30 mm Auxiliary Guides: 2 pcs, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc, 23 L/min – Helical gear pump Speed:Approach: 110 mm/sec Return: 200 mm/sec Pressure phase: 9 mm/sec Machine Dimensions:Daylight Opening: 500 mm Stroke Length: 400 mm Ram Plate: 790 x 600 mm (with T-slots) Table Plate: 790 x 600 mm (with T-slots) Table Height: 850 mm (from floor to top of table) Hydraulic Equipment:REXROTH hydraulic control block & components Pressure adjustable via PLC (20 – 100 tons) Speed adjustable via PLC Air oil cooler Pre-fill valve Pressure hold valve Control System:Siemens S7-1200 PLC Main control cabinet Safety PLC (SICK) Light curtains (SICK – 700 mm) Itjdpjwrkctjfx Ahpsi Linear encoder for stroke adjustment 10” PLC touchscreen – BEIJER (German & English) Movable two-hand control unit Ethernet connection for remote support Visual and acoustic fault alarms Dual work area lighting In full compliance with EN 693 machine safety regulations Side safety doors (outward opening) Hydraulic proportional valves Dual-channel safety control User manual & parts list (German) Oil Volume: 220 L (Tank capacity: 250 L)Total Weight: approx. 5,500 kgOverall Dimensions: 1300 x 2000 x 2750 mmColor: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Besichtigung unter Strom bei uns in Böheimkirchen 3071 (Neustiftgasse 34) möglich.

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Itsdpfjwzzzfjx Ahpsi Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg

Condition: new, pressure: 100stroke: 300tappet area: 600 x 900table area: 700 x 1100daylight: 550rapid traverse: 100working speed: 8Return speed: 165motor: 11 - ight curtain - manual and automatic working - manual stroke adjustment by camshaft switch - maintenance free self lubricating 4-fold ram guiding - polster plate with T-slots Isdpsd Ab Ihefx Ahpsti - according to CE rules press force:100 tohydraulic pressure:240 bartable:1100 x 700 mmram dimension:900 x 600 mmhole in table:120 mmstroke:300 mmdistance ram-table:550 mmrapid speed:100 mm/sworking speed:8,5 mm/sreturn speed:165 mmmotor:11 kWlength:2.180 mmwidth:1.600 mmheigth:3.150 mmweight:6.500 kg

Condition: new, drilling on table: 120die cushion returning speed: 52die cushion stroke: 200die cushion press capacity: 30motor power: 11retracting speed: 165working speed: 8,5rapid traverse: 100daylight: 750pressure: 100tappet measurements: 900 x 600table diamension: 1100 x 700messurements (LxWxH): 2.180 x 1.600 x 3.350weight approx.: 9300total power requirements: 11stroke: 500 Itsdpfx Ajd Ab Imehpei

Condition: new, pressure: 100stroke: 300total power requirements: 7,5weight approx.: 5400messurements (LxWxH): 1900 x 1300 x 2750table diamension: 1100 x 600tappet area: 680 x 420drilling on table: 120daylight: 500working speed: 5,5retracting speed: 37rapid traverse: 17,5 Itedped Ab Iysfx Ahpoi

Condition: new, Year of construction: 2026, pressure 150 t Itsdpfx Asyfwxtohpji throat 300 mm stroke 400 mm dayligth 600 mm table surface area 1000 x 600 mm Control Siemens S7 hole in the table 0 mm ram surface 1000 x 600 mm working feed 5 - 15 mm/sec speed down 130 mm/sek speed up 180 mm/sek power requirement 18 kW weight of the machine ca. 12,0 t dimensions 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, Year of construction: 2026, pressure 100 t throat 250 mm stroke 400 mm dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm working feed 10 mm/sec speed down 110 mm/sek speed up 160 mm/sek power requirement 11,0 kW weight of the machine ca. 5,5 t Itedpfxjyfwywo Ahpoi dimensions 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 74100 € 1400.49 € 100 to 300 mm 600 x 900 mm 700x1100 mm Iodpjwiqy Tefx Ahpsti 550 mm 100 mm/s 8,5 mm/s 165 mm/s 11 kW 2100 mm 2050 mm 3050 mm 6500 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 91200 € 1723.68 € 100 to 500 mm 600 x 900 mm 700 x 1100 mm 750 mm 320 mm 100 mm/s 8,5 mm/s 165 mm/s Itsdpfx Aswir Dgehpsi 11 kW 2100 mm 1900 mm 3350 mm 7300 kg 240 bar 30 to 200 mm 120 mm 170 bar 52 mm/sec. 700 x 400 mm 2-hand control Control over SPS Adjustable die cushion stroke Lubricant-free ram guide light barriers User Manual in German according to CE rules

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 59800 € 1130.22 € 100 to 400 mm 800 x 500 mm 500 mm 110 mm/s 10 mm/s 160 mm/s 11 kW 1900 mm 1700 mm 2930 mm 5500 kg 250 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides T-slots can be configured according to customer requirements Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Hydraulic proportional valve Itsdpfx Ahswmwvcspsi Cooler Siemens electrical components 8 additional signal inputs and outputs 7-inch touchscreen Siemens S7 PLC Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or Sick Category 4 sensors and photoelectric switch Two-hand control panel Reset and emergency stop buttons Equipped according to CE regulations

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 300 mm, table width: 1,400 mm, installation height: 500 mm, • Type of machine: Hydraulic press / C-frame press • Manufacturer: Müller Weingarten (historic German engineering company) • Model designation: CKD 100 4.1 • Applications: • Forming, punching, pressing of metal or plastic components Iodpfx Ahox Ry Hrepoti • Small and medium batch production • Tool and die making • Design: Robust H-frame or single-column construction, suitable for precise pressing and forming operations • Capacity: Typically around 100 t pressing force (number indicates approx. 100 metric tons nominal force—common for CKD models) 📐 Typical Features • Hydraulic drive: Precise control of force and stroke • Stroke range: Sufficient for versatile applications (e.g. drawing, bending, punching) • Stable construction: Designed for continuous industrial operation • Tool integration: Mounting options for custom tools and dies • Operation: Usually manual or semi-automatic, depending on year of manufacture 🧱 Typical Uses Hydraulic presses like the CKD series are used in production for: • Metal forming (e.g. bending, deep-drawing) • Assembling components by pressing • Assembly processes with defined force • Quality assurance and test pressing Complete circuit diagrams and documentation available! Inspection under power possible at any time.

Year of construction: 1990, condition: used, pressure 100 t Itjdpfxolp U Tuj Ahpoi throat 275 mm stroke 150 mm table surface area 860x550 mm ram surface 600x400 mm table height 810 mm tool hole in ram Ø 50 mm dayligth max. 475 mm weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 2000x2500x3300 mm

Year of construction: 1978, condition: used, pressure 100 t throat 380 mm stroke 400 mm power capacity 22 kW dayligth 600 mm Isdpfx Aslp U Dpshpeti ram surface 600x500 mm table surface area 720x600 mm weight of the machine ca. 9 t