Used Schoen Hydraulic Press for sale (38,449)

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW Gbolhccjxr Ay Ueqrow

Condition: used, Hydraulic double-column press from Hans Schoen. Type: UTE 50 Pressure capacity: 50 t Motor power: 5.2 kW Height: 270 cm (with table), 195 cm (without table) Width: 118 cm Depth: 95 cm Two-hand operation Machine can be loaded with a forklift. Location: 59939 Oslberg Gelhccqsv Spl Ujrsbw You will receive an invoice including 7% VAT. #JHOB2

Condition: ready for operation (used), Year of construction: 1982, functionality: limited functionality, machine/vehicle number: Fabrik Nr.2977, total height: 2,300 mm, table height: 850 mm, total width: 1,300 mm, total length: 1,300 mm, pressing force: 10 t, table width: 400 mm, table length: 500 mm, ram plate width: 360 mm, ram plate length: 220 mm, distance table to ram: 400 mm, stroke length: 110 mm, For sale: Hydraulic press – Manufacturer: Hans Schoen Golhccqjxwaumjrebw Model: SH-C Year of manufacture: 1982 Pressure: 100 kN Motor power: 3 kW Safety distance: 120 mm Overrun: 15 mm Ram pinhole Ø40 mm Safety light curtain not functioning! Condition: The machine was in regular operation until recently and is in perfect working order. This robust hydraulic press from Hans Schoen is ideally suited for a range of industrial applications requiring precise pressing force. It is distinguished by its reliable performance and durability.

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm Gjleu Nfmyshccqrebw table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: used, Year of construction: 1985, pressure 7 t throat 180 mm stroke 100 mm table surface area 320x300 mm ram surface Ø110 mm hole in the table Ø50 mm table height 850 mm tool hole in ram Ø30 mm weight of the machine ca. 1,5 t Golhcoxh Sycjcqrebw dimensions of the machine ca. BxTxH 1300x1300x2000 mm

Condition: used, Year of construction: 1990, pressure 60 t throat 400 mm stroke 600 mm dayligth 700 mm table surface area 1120 x 700 mm table height over floor 850 mm ram surface 700 x 700 mm feed down 300 mm/sec feed up 130 / 260 mm/sec feed under pressure 5 / 10 mm/sec Gelhcevut Edocqrebw oil volume 275 l total power requirement 7,5 kW weight of the machine ca. 7,3 t required space 1,6 x 2,0 x 3,7 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be inspected in running condition in our warehouse - new control can be offeren on request

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509, Year of manufacture 1971 Pressure capacity 50 tons Column width 550 mm Column side clearance 150 mm Table surface 480 x 380 mm Table opening Ø 70 mm Ram surface 490 x 280 mm Clamping pin bore Ø 40 mm Max. ram stroke 150 mm Max. installation height 390 mm Gbslhcov Srfwocqrsw Table height above floor 890 mm Rapid forward speed approx. 130 mm/sec. Working speed approx. 20 mm/sec. Return speed approx. 130 mm/sec. Motor power: 4 kW Power supply: 380 volts, 50 Hz - Continuous press force adjustment - Rapid stroke and working stroke - Pressure- or stroke-dependent stroke limitation - Adjustable pressure hold time, press time extension 0.5-6 seconds - Mechanically adjustable fixed stop via handwheel on the ram - SICK light barrier, type LVU - Stroke counter - Double column guide on the ram Space requirement: L x W x H: 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Year of construction: 2000, condition: excellent (used), Force: 300 tons Windows: Yes Daylight: 1000mm Table: 1800x1000mm Ram: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Gbolhccqsgbvkversw Siemens S7 control Floorstanding Sick lightguards Die cushion: 200mm stroke

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: Fabrik Nr.3206, total height: 2,720 mm, table height: 950 mm, total width: 1,300 mm, total length: 1,300 mm, pressing force: 16 t, table width: 300 mm, table length: 500 mm, ram plate width: 360 mm, ram plate length: 220 mm, distance table to ram: 390 mm, stroke length: 165 mm, Equipment: safety light barrier, For sale: Hydraulic press – Manufacturer: Hans Schoen Type: SH-C Year of manufacture: 1983 Pressure: 160 kN Motor power: 3 kW Safety distance: 130 mm Run-on distance: 13 mm Plunger pin hole Ø40mm Condition: The machine has been in regular operation until recently and functions flawlessly. Gbjlhccqjxv U Urorjw This robust hydraulic press from Hans Schoen is ideally suited for use in a range of industrial applications requiring precise pressing force. It stands out for its reliable performance and durability.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 2803, total height: 2,000 mm, installation height: 275 mm, total width: 1,350 mm, total length: 1,300 mm, throat depth: 300 mm, pressing force: 30 t, table width: 400 mm, table length: 500 mm, overall weight: 1,800 kg, Equipment: safety light barrier, Hydraulic C-frame press Fabr. Hans Schoen SH/C 30, year of manufacture 1980/2013, used. Press force 300 kN, installation height 275 mm, stroke 100 mm, throat depth 300 mm. Table: 500 x 400 mm. - new light barrier - control system refurbished Gelhow E E U Deccqrebw

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Table size 650x650mm Ram size round 140mm Stroke 130mm requested power 4 KW Gbjlhccqjfcw Apjrjw Weight 2000Kg height 2100mm width 1100mm depth 1500mm

Condition: ready for operation (used), Year of construction: 1998, pressing force: 250 t, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, stroke length: 150 mm, power: 37 kW (50.31 HP), Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Gbelhery Trpeccqrow Make an appointment for a demonstration.

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Gbslhccqsr I E Iterjw Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Year of construction: 1978, pressure 7 t throat 180 mm stroke 100 mm table surface area 300x300 mm ram surface Ø105 mm hole in the table Ø60 mm table height 1050 mm tool hole in ram Ø30 mm total power requirement kW dimensions of the machine ca. BxTxH 1200x1200x2100 mm Gelhccsvnwfbjqrjbw

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 3182, pressing force: 200 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Machine rebuilt in 2017! TECHNICAL DETAILS Gbelhccewhdn Ijqrew Max. pressure force: 200 t Year of manufacture: 1983 Year of rebuild: 2017 Motor power: 30 kW Safety clearance: 180 mm Overtravel: 18 mm Overtravel time: 90 ms Material feed Roll feed: 2 rolls Manufacturer: Eckardt

Condition: refurbished (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 2386, installation height: 280 mm, pressing force: 25 t, table width: 440 mm, table length: 320 mm, stroke length: 100 mm, hydraulic refurbished SCHOEN double column press TES 25 Year of manufacture 1979/2025 Pressing force 250 kN Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm The machine is being refurbished - new control system - new light barriers - revision of the hydraulics Gbelhevw Spmsccqrjw

Condition: good (used), Year of construction: 2000, total height: 47,000 mm, total width: 27,000 mm, total length: 25,000 mm, table width: 1,000 mm, table length: 1,800 mm, overall weight: 43,000 kg, ram plate width: 600 mm, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Side passages Ground level installation Gelhccqotiwgijrsbw

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Gslhccqsw A Amrsrebw Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Year of construction: 1990, condition: used, pressure 100 t throat 275 mm stroke 150 mm table surface area 860x550 mm ram surface 600x400 mm table height 810 mm tool hole in ram Ø 50 mm dayligth max. 475 mm Gbelhccqslp U Tusrow weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 2000x2500x3300 mm

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4290, total height: 2,750 mm, installation height: 500 mm, pressing force: 30 t, table width: 440 mm, table length: 320 mm, stroke length: 300 mm, overhauled Schoen double column press year 1997/2024 Pressing force 300 kN Installation height 500 mm Gjlhccqeu Hyx Ssrebw stroke: 300 mm Table: W x D 440 x 320 mm Machine will be overhauled: - new control - new light barrier - revision of the hydraulics

Condition: good (used), Year of construction: 1972, pressing force: 160 t, Engine power 20 hp Gjlhevi Iiaeccqrobw

Condition: used, Single-column hydraulic press SCHÖN type TES/C Year of manufacture 1977 Pressing force 63 tons (160 bar) Thrust 320 mm Table size 600 x 770 mm Ram surface 600 x 400 mm Gbjlsv Tp D Tohccqrew Ram stroke 125 mm Max. installation height 400 mm (with intermediate plate on the ram) Rapid downward traverse speed approx. 180 mm/sec. Rapid working speed approx. 25 mm/sec. Rapid upward traverse speed approx. 180 mm/sec. Table height above floor: 870 mm Drive power: 22 kW Power supply: 380 volts, 50 Hz Tank capacity: approx. 280 liters of hydraulic oil - Adjustable fixed stop - Electric two-hand operation - Intermediate plate on the ram: L x W x H 500 x 500 x 50 mm Space requirement: L x W x H 2400 x 1100 x 2750 mm Weight: 4 tons Good condition

Year of construction: 1978, condition: used, pressure 25 t stroke 100 mm Gelhccqolp U A Isrebw table surface area 440x320 mm ram surface 360x220 mm hole in the table 160x100 mm table height 900 mm tool hole in ram Ø 40 mm dayligth 280 mm weight of the machine ca. 1,5 t dimensions of the machine ca. BxTxH 1500x1500x2100 mm

Condition: refurbished (used), Year of construction: 2024, machine/vehicle number: 2260, installation height: 280 mm, pressing force: 25 t, table width: 580 mm, table length: 320 mm, stroke length: 100 mm, Schoen hydraulic double column press Year of manufacture 1978/2024 Machine is/will be generally overhauled Gslhjt Dzy Reccqrobw - new control - New light barrier - Revision of the hydraulics Pressing force: 250 kN Installation height: 280 mm stroke: 100 mm Table width: 580 mm Table depth: 320 mm

Condition: good (used), Year of construction: 2000, functionality: fully functional, installation height: 400 mm, pressing force: 20 t, table width: 800 mm, table length: 500 mm, stroke length: 150 mm, hydraulic double column press Schoen UTE/B20 year 2000 used control Siemens S 7 pressing force: 200 kN Installation height 400 mm stroke: 150 mm table width: 800 mm Gjlhcjt Dzpfocqrsbw Table depth: 500 mm