Used Studer S 40 for sale (70)

Condition: used, TECHNICAL DETAILS - distance between centers : 1000 [mm] - centers height : 175 [mm] - strokes (Z/X) : 1050 x 275 [mm] - max. feeds (Z/X) : 10 x 5 [m/min] - grinding wheelhead type : 2 external, 1 internal - left external grinding wheel dimension : 500 x 63 x 127 [mm] - right grinding wheel dimension : 400 x 63 x 127 [mm] - grinding wheel motor power : 7,5 [kW] - rotation speed : 1670 - 2110 [Rpm] - grinding wheelhead orientation : -15 to +225 [°] - resolution : 0.001 [°] - workhead tapper : MT5 - workhead rotation speed : 1 - 1027 [Rpm] - workhead power : 0,785 [kW] - tail stock : MT3 - quill stroke : 35 [mm] - weight : 7000 [kg] - hours under power : 47.959 [h] EQUIPMENT - control CNC FANUC 16 TB - programming through Pictogramming - Release B version B275 - deported electronic handwheel - 2 grinding wheels left-right internal at 180 [°] - B axis for indexing of the grinding wheelhead every 0,001 [°] - high precision C axis for part indexing and form grinding - tail stock with fine concentricity adjustment - sensitron - upper table swiveling fine adjustment - control pedal - lenght positioning device MARPOSS E32R with sensor T25G - measuring scales HEIDENHAIN on X/Z - coolant tank with pump - 1 grinding wheel holder flange Bjdpsuhbyqjfx Ab Ujlf - 1 grinding wheel - 1 dry center - 1 electro-spindle : 40.000 [Rpm] - tail stock hydraulic retract through pedal

Condition: used, Year of construction: 1987, machine/vehicle number: 6004.01, grinding diameter:350 mm Bljdpfx Abjdmppqs Ujf grinding length:1000 mm centre height:175 mm workpiece weight:120 kg power capacity:5,5 kW turning speeds:max. 25000 U/min control:FMS 5-88 weight of the machine ca.:3,5 t precision grinding machine with SONY digital display, coolant system, electronic hand wheel, separate electrical cabinet, emergency cut-off

Condition: like new (used), Year of construction: 1995, functionality: fully functional, center height: 225 mm, workpiece weight (max.): 100 kg, grinding length: 1,600 mm, CNC cylindrical grinding machine STUDER S40, year of manufacture 1995. The machine is in good used condition. Technical data: • Control: Fanuc Series 16-GC • Required space approx. (Height/Length/Width): 250 cm / 650 cm / 320 cm Axes: • Distance between centers: 1,600 mm Bedpfx Abot N Ivce Ujlf • Center height: 225 mm • 4 axes (X, Z, B, C) • Max. workpiece weight approx.: 100 kg Equipment: • 2 grinding wheels + 1 internal grinding stone (selectable via control) • Face, plunge, internal, and cylindrical grinding • Magnetic chuck, three-jaw chuck, collets, between-centers grinding • Automatic dressing device • Steady rest • Resolution: 0.0001 mm • Polygon grinding • Static balancing unit • Grinding wheels available in corundum, diamond, and CBN • Cycle control • DXF import possible

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 7360.32, Machine: Studer S40-4 Serial number: 7360.32 Year of manufacture: 1991 Control: Sinumerik System 3 Power supply: 22 kVA Bledpfx Abjyilire Ujf

Condition: good (used), cylindrical grinding machine Blodpfx Abetrgndo Uef

Condition: as good as new (ex-display), Year of construction: 2025, Studer S40 1000/1600 grinding length: 1.000/1.600 mm Center height: 175 mm (optionally more possible) Workpiece weight: 120 kg Further freely selectable options: - completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control system - Fast set-up via GSN operator interface Bjdefg S Uaspfx Ab Ujlf - B-axis freely positionable - second external grinding wheel - internal grinding unit - center elevation - Dressing spindle for diamond form roll - balancing and grinding sensor system - Tailstock hydraulic clamping / unclamping - Autom. Siemens door drive - 19" / 22" screen - remote maintenance - conversion to needle nozzles - suitable coolant / exhaust system - automation preparation - and much more We can also overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella uvm.

Condition: used, Distance between centers: 1000 mm Maximum external grinding diameter: 320 mm Grinding wheel dimensions (OD x ID x width): Ø500 x Ø127 x 80 mm Maximum internal grinding diameter: 200 mm Center height: 175 mm Control type (CNC/manual): CNC CNC brand: FANUC CNC model: 16GC Maximum grinding length: 1000 mm Maximum workpiece weight: 130 kg Main motor power: 7.5 kW / 2870 rpm Total power: 30 kW Internal grinding spindle power: 15 kW Max. workhead spindle speed: 30 - 750 rpm Voltage: 380 V / 50 Hz X-axis feed: 0.0001 – 5,000 mm/min Z-axis feed: 0.0001 – 10,000 mm/min Air pressure: 1.5 - 3 bar Bsdpjxxmcgsfx Ab Uelf Coolant flow rate: 100 L/min Max. Z-axis travel: 1050 mm Max. X-axis travel: 275 mm Max. worktable swivel: 8.5º Workhead internal taper: M 5 Tailstock taper: M 3 Tailstock quill travel: 35 mm Dimensions (L x W x H): 3,687 mm x 2,000 mm x 2,090 mm Weight: 5,200 kg

Condition: used, Year of construction: 1982, grinding diameter:250 mm grinding length:650 mm centre height:125 mm internal grinding spindle rev.-stepless:9500-50000 U/min workpiece speeds -stepless:50-10000 mm/min grinding head swivelling:90 Grad max. dia. of grinding wheel:400 mm spindle bore:30 mm grinding length - plunge feed:80 (100) mm max. grinding depth by internal grinding:ca. 170 mm max. bore diameter to be ground:90 mm feed speeds:240 mm/min max. workpiece weight:80 kg Bodpfx Aocxxubob Uolf required cooling water:36 l/min centre distance:650 mm distance of workpiece spindle-taper cone:960 mm drive capacity - spindle motor:6,25 kW connected load:ca. 10 kW total power requirement:8,5 kW weight of the machine ca.:3,4 t dimensions of the machine ca.:3,9 x 2,5 x 1,85 m with Studer control, electric/hydraulic drive, variable speed, tailstock with fine adjustment and hydraulic back feed, work piece headstock with increased precision, table air , hydraulic removable dressing device, radius-dressing device, Hydro-Cyclone filter, automatic grinding wheel-balancing device, automatic dressing cycle with speed compensation

Condition: reconditioned (used), STUDER S 20-12 is a cylindrical grinder engineered for precision, high accuracy and reliable performance. Capacities: centre height 100 mm, distance between centres 400 mm; wheel Ø300×30 mm, bore 127 mm; work-spindle 20°, table tilt 30°. Specs: work-spindle speeds 60–1200 rpm (stepless); wheel speed up to 45,000 rpm; table feed 100–3500 mm/min; wheel motor 4.5 CV; 3×380 V; weight ≈1900 kg; dims 1500×1400×1600 mm. Key accessories: swivelling internal grinding unit, dressing devices, 120 mm magnetic chuck. Achieves tight tolerances; typical sectors: automotive, aerospace, toolmaking, medical, watchmaking Bedpfsyxn I Tex Ab Uelf

Condition: good (used), Year of construction: 2000, Universal Cylindrical Grinding Machine Studer S30 leanPRO Studer S 30 Year of manufacture: 2000 Operating hours counter Regular maintenance intervals by manufacturer (last service 11/25, report available) Wheel change: according to manufacturer intervals Hydraulic inspection: annual check Backup battery replacement: included in Studer maintenance Control system: FANUC 16 T Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 125 mm Distance between centers: 650 mm Optional grinding cycles for increased center height Table adjustment: 11° Glass scale on X / Z axis Paper band filter unit Workpiece headstock: approx. 1-1,000 rpm Internal grinding attachment with accessories LED spotlight with flexible arm Grinding wheel: 400x80 mm Frequency converter for external grinding spindle Grinding wheel flange Bore diameter: 127 mm Frequency converter for internal grinding spindle Workpiece weight: approx. 80 kg Workpiece support with live center and MK 4 Workpiece headstock: MK 5 taper Tailstock: MK 3 taper Quill stroke: 40 mm Machine weight: approx. 3,400 kg Installation dimensions (LxW): 2,300x1,550 mm Machine height: approx. 2,000 mm Electrical supply Bodpsyx Hgzjfx Ab Ujlf Digital linear measurement system Coolant supply with fleece filter, tank capacity 300L Operating hours counter, control ON: 35,978 h

Condition: like new (used), Year of construction: 2010, Machine Type: CNC Cylindrical Grinding Machine Manufacturer: Fritz Studer AG Model: S22 Year of Manufacture: 2010 Control System: FANUC 31i-A CNC Machine Base: Granitan® S103 mineral casting Configuration: Fixed straight wheelhead for external (OD) grinding Automation: Automatic loading system with FANUC robot integration Distance Between Centers: 650 mm (25.6”) Center Height: 175 mm (6.9”) Max. Workpiece Weight: 150 kg (330 lbs) Max. Workpiece Length: 700 mm Max. Workpiece Diameter: 449 mm Grinding Wheel Diameter: 610 mm Grinding Wheel Width: 160 mm Grinding Wheel Speed: Up to 3,200 rpm Spindle Power: 15 kW (20.5 hp) Wheelhead Type: Fixed straight X-Axis Travel: 310 mm Z-Axis Travel: 850 mm Blodpfx Abjwl Uvko Uef X-Axis Max. Speed: 15,000 mm/min Z-Axis Max. Speed: 30,000 mm/min C-Axis: Full rotation capability for workhead Programming Interface: StuderWIN with FANUC 31i-A Additional Software: StuderGRIND Automation Interfaces: Standard interfaces for loaders and peripherals Other Equipment: Rotary dresser, Heidenhain scales, various clamping fixtures

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Bodolbgfcopfx Ab Uolf Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Year of construction: 1989, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 5117.19, TECHNICAL DETAILS grinding diameter: 450 mm grinding length: 1600 mm center height: 225 mm control name: Siemens Sinumerik System3 speed: max. 2440 rpm center distance: 1750 mm resolution: 0,001 mm Bodpfxolnkfas Ab Uelf speed: 0,06 - 10000 mm/min cross slide: 180 mm feed rate: 0,01 - 5000 mm/min resolution: 0,0005 mm workpiece weight: max. 500 kg quill travel: 40 mm Straightness of surface line over 650 mm: 0.004 mm Roundness accuracy: 0.0005 mm MACHINE DETAILS Machine weight: approx. 7.3 t total connected load: max. 22 kVA

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Studer S20 in very good condition with accessories and documentation Bedpfx Aewa Iimjb Uelf

Condition: used, TECHNICAL DETAILS - centers height : 100 [mm] - distance between centers : 650 [mm] - length of internal grinding : 100 [mm] - Ø of internal grinding : 3 to 40 [mm] - maximal table orientation : 30 [°] - workhead : * spindle speed (variator) : 60-1200 [Rpm] * motor power : 0.5 [kW] * interior cone : morse 4/2 - wheels sizes : 350 x 30 x 127 [mm] - wheelhead : * power : 3 [kW] * orientation : 15/30 [°] - maxi part weight : 20 [kg] - maxi power required : 5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3000 x 1400 [mm] - Machine height : 1600 [mm] Bodpfx Absuhby Re Ujlf - Machine weight : 1900 [kg] EQUIPMENT - complete internal grinding attachment : 45.000 [rpm] - 1 complete cooling device - 1 counter headstock with fine adjustment - 1 reversible and adjustable trueing device - 1 directional diamond holder - 2 axis X, Y digital display - 1 steady rests 3 points

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center height: 225 mm, controller model: Fanuc 16T, TECHNICAL DETAILS Centre height: 225 mm Bsdpfx Aexlix Djb Uslf MACHINE DETAILS Control: Fanuc 16T

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Bsdpjuwp Epofx Ab Uslf Parts shown by hand not come. Technical data are in documents .

Condition: used, CNC cylindrical grinding machine STUDER S31 CNC LeanPro with "Pictogramming" Distance between centers: 1000mm Center heigh 175mm Grinding Wheel head rotation (B) 360° (1°) 2 ext Grinding Wheels 1 int Grinding Wheel Ext Grinding wheel 400 mm x 40 mm x 127 mm overhauled spindle > see photos Workhead CM 4 0-1000 RPM CNC Fanuc Programming: Pictogramming Heidenhain linear encoders Bsdewim U Hopfx Ab Ujlf This machine can be inspected under power in our warehouse in Gussago BS Italy

Condition: used, Year of construction: 2003, internal diameter 99999 mm grinding depth 99999 mm swing diameter 99999 mm grinding diameter 99999 mm grinding length 200 mm centre height 175 mm Bedpjuxft Ssfx Ab Uslf CNC internal grinding machine B-axis 4 x 90° Q-axis for adjusting tapers Used with minor maintenance 2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm 1 external grinding motor spindle Fischer MFVS1407 7,000 rpm -Pneumatic power clamping device with 20mm stroke -Dressing device with 2 swivelling arms, hydraulically foldable back -Grinding detection ring sensor Dittel on the workpiece headstock -Passive grinding detection with magnetic base -Paper belt filter 375 l

Condition: used, Year of construction: 1987, grinding diameter 200 mm grinding length 400 mm centre height 100 mm Geometrically overhauled and repainted With internal grinding device Accessories on request Bedpjvw Duuofx Ab Uolf The machine can be viewed in operation at the customer's premises from 2025 through January 2026.

Condition: used, Year of construction: 2002, grinding diameter 250 mm grinding length 400 mm centre height 125 mm Control Fanuc 21i-T Bjdpfx Asvx Dvueb Ujlf Maschine gewartet und teilüberholt. -Neue Schleifspindellagerung -Neue x-Achs Spindel -Obertisch überschliffen -Neue Geometrie Tischgeometrie -Neue Geometrie WSS zu Schleifspindeln B-Achse mit 1° Hirth Verzahnung Längspositionierung HF-Innenschleifspindel GAP Papierbandfilter

Condition: used, Year of construction: 1999, grinding diameter 350 mm grinding length 540 mm centre height 175 mm 2015 wurde bei Studer der WSS, Reitstock und Werkstücktisch überholt 2024 Austausch KGT von X+Z- Achse durch Studer Kühlmittelanlage mit Magnetwalze Werkstückspindelstock Reitstock Meßsteuerung Auswuchtgerät Dittel Lünette PCU-Terminal Bodpfxsxyadgj Ab Ujlf

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 004-040.0004, CNC Cylindrical Grinding Machine Manufacturer: STUDER Model: S22 CNC Year of manufacture: 2009 Machine / Workpiece Data Distance between centers: approx. 650 mm Center height: 175 mm Maximum workpiece weight: 150 kg Maximum grinding length: approx. 800 mm Linear Axes / Guides X-axis (cross slide): Maximum travel approx. 310 mm X-axis feed rate up to approx. 15,000 mm/min (depending on configuration) Z-axis (longitudinal slide): Maximum travel approx. 850 mm Blsdoxtpnzepfx Ab Ujf Z-axis feed rate up to approx. 30,000 mm/min Grinding Spindle / Grinding Wheel Main spindle power, e.g. 12.5 kW in the standard version Standard grinding wheel diameter e.g. Ø 500 × 80 × 203 mm, circumferential speed up to approx. 50 m/s Optional high-speed grinding (HSG): e.g. grinding wheel Ø 400 x 40 x 127 mm, circumferential speed up to approx. 140 m/s Control / Software / Equipment Control, standard: e.g. FANUC 31i-A (PC integrated) with StuderWIN operator interface Guideways: Machine bed made from Granitan® S103 (mineral cast) for thermal stability and damping Dimensions / Electrical Data Machine weight approx. 8,500 kg Power supply, typically 400 V / 50 Hz (country-specific)

Condition: used, Year of construction: 2008, operating hours: 18,937 h, functionality: fully functional, machine/vehicle number: 67, STUDER S145cnc INTERNAL GRINDING MACHINE Series 65 Year of manufacture: Sep. 2008 Operating hours: 18,937 Price: €118,000 This is a service-recorded machine: it undergoes an annual maintenance check by STUDER, with all wear parts replaced as needed. The machine has been used exclusively for producing precision spindles, achieving tolerances up to max. 0.0003 mm. Bjdpfsyw Nuxox Ab Uslf The machine operates with grinding oil. Initially used in single-shift operation, in the last two years it has been working two shifts. The machine is in use and available for inspection upon request. The machine is being sold due to new equipment acquisition. Extras: Spindle adapters and flanges available upon agreement. Specifications: • Swing diameter ..... 448 mm • Center height ..... 225 mm • Workhead (chuck spindle head) with roller bearings, mounting taper ISO50 – spindle nose Ø110 mm, spindle bore Ø50 mm • Machine bed made from Granitan S103 • Worktable swiveling range: +/-30° • Direct measuring system for X and Z axes • Touch-trigger probe Movomatic C25 (switching) • FANUC CNC control system 21i-TB • Portable control unit Studer PCU terminal with LCD display • Machine is currently in operation • Transport arrangements to be made by the buyer The machine is equipped with 4 spindles: one external spindle, two internal spindles, and one internal spindle with longitudinal positioner. RPM – one spindle: 60,000; two spindles: 42,000; one spindle: 5,000 Type: Fischer

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, Distance between centers: 650 mm ID / OD 2-axis SONY digital read out Coolant tank Bsdpfeyr Nn Hox Ab Ujlf More information upon request.