Used Donau Dr 40 Digi for sale (51)

Condition: used, Year of construction: 1987, We are offering this used Donau DR 40-Z high-speed radial drilling machine, year of manufacture 1987. Manufacturer: Donau Rsdpfx Aey Dn E Njp Ijw Model: DR 40-Z Serial number: 1146-3 If you have any questions or require further information, please feel free to send us a message. The machine is located in Osterode/Harz. Viewing can be arranged by appointment. This is a used machine, therefore we sell under exclusion of any warranty.

Condition: used, Year of construction: 1991, spindle mount: MK 4, Work table 600mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 40mm in steel Rodpfox N Iftox Ap Ijw Thread cutting device Coolant system Documentation

Condition: good (used), Year of construction: 1988, Fast Radial Drilling Machine Hersteller: Donau Type: DR 40 DIGI STEUERUNG: NC Steuerung Construction year 1988 EINSATZBEREICHE - BOHREN Bohrleistung Gesamtloch (Stahl): 40 mm Neck (max): 800 mm SPINDLE / PIN Spindle speed (min): 335/min Rjdpfx Apsikvcae Iew Spindle speed (max): 1800/min Anzahl der Gänge: 2 Werkzeugaufnahme: MK 4 ON SPECIFICATION Table surface: 1200 x 750 mm ELEKTRISCHE VORSCHRIFTEN Mains voltage: 400 V Mains frequency: 50 Hz ABMESSUNGEN / GEWICHTE Width: 2500 mm Depth: 1250 mm Total height: 2500 mm Weight 2.6 t Drive 6kw

Condition: refurbished (used), Repair of the tachometer circuit board for various models. Rjdjy Rfzujpfx Ap Iew Please contact us if the gear stages are no longer functioning correctly as intended.

Condition: used, Year of construction: 1971, Technical details: bore capacity in steel (diameter): 23 mm workpiece height max.: ./x. 2 mm drill capacity in cast iron: Ø 26 mm spindle taper: MK 3 bore spindle stroke: 135 (manual/automatic) mm range drill spindle revolution per minute: 7step U/min feed range: mm/U Table dimensions: 1200 x 500 mm table surface area: 1070 x 400 mm total power requirement: 3,55 kW weight of the machine ca.: 1,4 t dimension machine xH: 1,7 x 1,2 x 2,2 m Jib Length Arm: -vertical adjustment: 450mm and horizontal adjustment: 610mm -swiveling 360°, hydr. lock Right/left rotation for thread cutting with automatic switchover Operation via control panel Coolant tank with pump Redpsv Ay T Djfx Ap Isw *

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Rjdpfx Aporn Riqj Iew Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface

Condition: ready for operation (used), DONAU DR 23 - High-speed radial drilling machine Rjdey Uv Tvspfx Ap Isw - Drilling capacity / steel approx. 28 mm - Arm length 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm (gearbox) - Automatic feeds 0.075-0.3 mm - Thread cutting device - Drilling depth approx. 130 mm - Hydraulic clamping - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Subject to errors and omissions.

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Speed: 60 - 1800 rpm Arm reach: 600 mm Base plate: 100 x 1400 x 110 mm Thread cutting device Rsdpfx Apox Hgkvj Iow Coolant system Machine lamp Quick-change holder with inserts Machine vice

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 60 - 1800 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed Redpfxsy Aa H Nj Ap Ijw - Thread cutting device

Condition: used, Year of construction: 1991, Work table 600mm x 1200mm Rsdpjxpfgljfx Ap Ijw Column travel 600mm Tool holder MK 3 Drilling capacity 28mm in steel Tapping device Coolant system Documentation

Condition: refurbished (used), Year of construction: 1980, Worktable 500mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant system Rsdpfx Aox N Ih Iep Ijw Safety device at the drill Completely overhauled in 2026

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Rjdpfou Et Nbjx Ap Isw Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: good (used), Year of construction: 1992, machine/vehicle number: 2355-2, Offer 24416 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 Rodpfx Apeufw S Re Isw - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2500 x D 2300 mm - Weight approx. 1500 kg - with: - thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: refurbished (used), functionality: fully functional, table length: 1,200 mm, table width: 500 mm, spindle mount: MK 3, height adjustment type: electric, Donau DR23 Radial Drilling Machine – Robust Quality Machine For sale is a reliable Donau DR23 radial drilling machine, ideal for workshops, metalworking, or industrial applications. The machine impresses with its sturdy design, high precision, and versatile applications for drilling, countersinking, and thread cutting. Details: Redpfsyrtkxjx Ap Ijw Manufacturer: Donau Model: DR23 Radial drilling machine overhauled by Vaumtec Quick-change chuck Stable cast construction Adjustable arm for flexible machining of large workpieces Suitable for steel, aluminum, and other metals Forward and reverse rotation

Condition: new, Spare parts for Donau high-speed radial drilling machines Donau DR Rodpsy Ri H Isfx Ap Iew Donau Danuflex Donau Danumeric Donau Danusys Donauflex Donaumeric

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 Redpfx Ajv If T Tsp Iew GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment

Condition: used, Year of construction: 2000, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and Travel Ranges Tool holder: SK 40 Table dimensions: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance: - Spindle bottom edge: min. mm 140 - Table top edge: max. mm 740 Boring radius: - min. mm 540 - max. mm 1590 Travel range U-axis: mm 2600 Travel range Y-axis: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling performance in solid material: - St 60: mm 40 - GG 22: mm 50 Thread cutting: - St 60: M 36 - GG 22: M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque: Nm max. 250 Constant from: min-1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Rsdpfsy Ttrtox Ap Isw Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, infinitely variable: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positional accuracy X, Y axis at 1200 mm: mm ± 0.075 Repeatability X, Y axis: mm ± 0.03 Positional accuracy Z axis: mm ± 0.05 Repeatability Z axis: mm ± 0.03 Positional accuracy W axis: mm ± 0.05 Repeatability W axis: mm ± 0.03 Electrical data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen, backlit, easily readable from all sides Position data: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining cycles: Cycles for centering, drilling, threading, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible in each cycle Chip breaking / chip removal: possible in drilling cycle Drilling patterns: Hole pattern, hole circle, matrix Basic software: Programming in dialog mode, 38 zero-point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning cast and sintered parts - Angle detection for round parts by probing the reference edges or surfaces Data interfaces Paint finish with signs of use Standard paint finish, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical wiring diagram Spare parts drawings Test report for mechanics, electrical system and safety devices

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Redey Nd T Hjpfx Ap Iew Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: ready for operation (used), Year of construction: 1995, Drilling capacity St 60/GG 22: 40/50 mm Thread cutting St 60/GG 22: M 36/M 45 Clamping area of the table: 600 x 1800 mm Height adjustment of the boom: 450 mm Min./max. drilling radius: 305/1305 mm Spindle taper: SK 40 Quill stroke: 200 mm Infinitely variable spindle speeds: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency controlled: 5.5 kW Rjdpfx Apoy I Ua Ij Ijw Electrical connection: 400 V, 14 kVA Weight: 3400 kg Space required: 3800 x 2000 x 2500 mm

Year of construction: 2018, condition: ready for operation (used), A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement. Rsdpfxoy Tn Nto Ap Iow

Condition: ready for operation (used), Donau Danumeric 440 Radial Drilling Machine Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Tool holder: SK 40 Spindle speed: approx. 15 – 2,800 rpm (infinitely variable) Feed: infinitely variable approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column stroke (W): 410 mm Arm traverse: 1,050 mm Drilling radius: approx. 540 – 1,290 mm Arm swivel range: approx. 330° Column diameter: 195 mm Redoyrdc Sopfx Ap Iew You are welcome to arrange a viewing. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued (a valid VAT ID number is required). Interim sale reserved. Visit our shop and take a look at our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may vary and errors in the item description are reserved.

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Redpfjyxw Ddsx Ap Isw Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: good (used), Year of construction: 2003, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine configuration • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm at the rear of the machine base Redpeyuqmiefx Ap Iew • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device Dimensions and Travel Ranges Tool holder SK 40 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill travel (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle lower edge – table top min mm 70 / max mm 680 Distance spindle lower edge – floor min mm 970 / max mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacities Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 @ 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feed rate stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, values absolute or incremental Units: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions by machining operation, material-dependent cutting data suggestions Tool management: up to 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program re-start with selectable functions for targeted entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - arbitrarily mounted rectangular parts - arbitrarily mounted round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges or surfaces Test graphic: Graphical display of drilling patterns.

Condition: good (used), Year of construction: 1965, functionality: fully functional, throat depth: 930 mm, For sale is a Donau brand DR30 high-speed radial drilling machine. The machine is in good and fully functional condition. Technical specifications: Year of manufacture: 1965 Drilling capacity in steel (diameter): approx. 30 mm Tapping capacity in steel: approx. M36 in cast iron Spindle mount: MK 3 Spindle speeds: Continuously variable approx. 45 - 2240 rpm Quill stroke: approx. 170 mm Thrust: approx. 930 mm Boom swivel range: 360° Table size: 1200 x 500 mm Spindle motor power: 4.0 kW Weight: approx. 1.8 t Dimensions (L x W x H): approx. 1.3 x 2.1 x 2.45 m Tapping device with shut-off and reversing. Motorized boom height adjustment. Left-hand drilling control, hand and foot. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Rsdpfowal Hpsx Ap Iew Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm Rsdpfsirax Ujx Ap Iew -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg