bore capacity in steel (diameter): 32 mm
arm length: 850/350 mm
cantilever adjustment vertical: 800 mm
spindle taper MT: 3
drill head horizontal traverse: 500 mm
spindle stroke: 125 mm
distance drilling head - clamping area: 0 - 880 mm
number of spindle speeds: 56 - 1400 / 8 step U/min
feed: 0,063 - 0,63 mm/U / 6 step mm/U
total power requirement: 2,2 kW
weight of the machine ca.: 1,53 t
dimension machine xH: 2,5 x 0,65 x 2,0 m
other characteristics:
- Drill head 360° rotatable via radial scal...
bore capacity in steel (diameter) 32 mm
arm length max. 1005 mm
workpiece height max. 500 mm
bore depth 200 mm
thread cutting attachment ja
spindle taper MK 3
feed 0,08; 0,12; 0,2; 0,25 m/min
Biixt0q0bg
surface area 1140 x 390 mm
swiveling of the radial arm 360 °
turning speed range 100 - 1400 U/min
coolant ja
boring chuck Schnellspannfutter 0-13
total power requirement 2,2 kW
weight of the machine ca. 1,4 t
dimensions of the machine ca. 1590 x 1420 x 1980 mm
distance between spindle cent...
High-speed radial drilling machines
Make: HKS
Model: HKS 34 MG
Year of construction: 1988 - workshop checked, new painted,
RAL9016 traffic white / RAL7016 anthracite grey
Machine no.: 34 1235
Accessories:
Bjpepm00ms
- Coolant system
- Thread cutting device
- Clamping plate (670 x 500 mm) with T-slots (18 mm)
mounted at the rear of the machine stand
- Operating instructions
-used, as seen-
Vertical boom adjustment: 1600 mm.
Headstock adjustment: 2620-3470 mm.
Bi7b8p0sll
Spindle end distance from base: 3150-4000 mm.
Spindle taper: MORSE 6.
Spindle Speed - Range: 9-1400 rpm.
Max. drilling diameter: 80 mm.
Machine input: 16kV.
Rotating arm around column: 360.
Machine dimensions L x W x H 14900 x 8400 x 5455 mm.
Machine weight approx. 23 tons.
bore capacity in steel (diameter) 32 mm
arm length 800 mm
table surface area 930 x 650 mm
spindle taper MK 5
spindle turning speed range 33 - 1500 U/min
drilling feeds 0,08 - 1,5 mm/U
crossrail adjustment vertical max. 550 mm
weight of the machine ca. 2,6 t
Bnvzb3yt7y
Accessories: machine vice, coolant
- thread cutting attachment -
KOLB radial drilling machine MK 20
with coolant device (cannot be tested)
drill holder MK 3, right-left run, table swivelling, with vice
Machine is sold as seen.
Transport costs are borne by the buyer. Loading by existing forklift
Nwx2l
Radial drilling machine
Brand: Donau
Blgeprgr0f
Type: DR 23
Machine no.:266-2
drilling capacity in steel (diameter): 2300 mm
Projection: 900 mm
spindle mount MK: 3 MK
Drilling depth: 130 mm
Speed: 70 - 1550 rpm
Column diameter: 150 mm
table clamping surface: 1200 x 500 mm
Feed range: 0.075/0.15/0.3 mm/rev
Total power requirement: 4.0 kW
Dimensions: 1600 X 1400 X 1900 mm
Weight: Ca 2000 kilo
Radial drilling machine make Alzmetall
with right / left run
Table size : 550 x 480 mm with 3 T slots
24 speeds from 25 - 2440 rpm
automatic feed : 0,1 - 0,2 - 0,3 mm/feed/revolution
Overhang 700 mm
maximum distance spindle - table 750 mm
maximum distance spindle - base plate 1250 mm
Space requirement : H.ca.2150 mm x D.1440 x W 700 mm
Weight 950 kg
Dw0hdm
380 volts
bore capacity in steel (diameter) bis 128 mm
arm length 1.850 mm
taper MK MK5
feed
hydraulic clamping
digital im X Weg
bore cube 1.000 x 600 mm
Gwxke0
weight of the machine ca. 7 t
Radial drill press in good condition.
With motorized boom (Up / Down)
Morse taper 4
Travel on the boom: 725 mm.
Travel on spindle: 270 mm.
Bnxo2cb
32 - 2500 rpm.
0.06 - 0.8 mm / rpm feed rate.
Spindle diameter: Ø65 mm.
Max height between table and spindle: 995 mm.
Total dimensions: 180 x 85 cm.
Height: 248 cm. (Transport height: 228 cm)
Code 71152
OMSCHRIJVING Radiaalboormachine
Fabrikaat MAS Kovosvit
Type VO 32
Serie Nummer 1094
Bouwjaar 1990
Boorcapaciteit in Staal 60 32 mm
Boorcapaciteit in Gietijzer 25 45 mm
Draadsnijden in Staal 60 M 20
Draadsnijden in Gietijzer 25 M 24
Konus van de boorspil MK 4
Max / min afstand boorspil-grondplaat 1040 / 270 mm
Verplaatsing boorarm 520 mm
Uitlading spil: max / min 1000 / 250 mm
Slag boorspil 250 mm
Aa...
Manufacturer ALZMETALL
Model AB 3/R
Machine no.: 1249
Morse taper MK 3
Drilling capacity:
steel 28 mm
Cast iron 32 mm
Overhang 700mm
3 Feed rates 0.1 - 0.2 - 0.3 mm/rev
Dwzyou
15 Spindle speeds 50 - 1220 rpm
spindle stroke 260mm
gr. distance spindle - base plate 1320 mm
Height adjustment of extension arm 630 mm
Spindle motor 1.1 / 1.7 kW
Hoist motor 0,55 kW
External dimensions:
length 1400 mm
Width 700 mm
Height 2300 mm
Weight approx. 1100 kg
Accessories:
Dice table 550 x 480 x 500 mm
Coolant sy...
Radial drilling machine
Perfected in detail, powerful, stable and handy
Base, column, boom and gear head are made of high quality cast iron
essential design features are the large dimensioned column and the particularly torsion-resistant boom
Height adjustment of the jib is carried out via a powerful, motorised drive and lifting spindle
the boom lifting gear runs in an oil bath and works reliably and with low wear
the elaborate column swivel construction with optimized clamping convinces by high...
"Foradia radial drill model GF 50/800,, Manual locking, maximum drilling diameter 50mm, column diameter 250mm, arm 800, maximum distance spindle -base 765mm, morse taper 5, speed range 35-1460.6 advances, estimated weight 2000kg, Double column drill, ideal for boring, drill in general in good condition.
Bkkp0tnl7y
The radial drilling machine is currently undergoing a general overhaul and modernization in our factory.
After the completed general overhaul and modernization, the machine meets all standards and has all the technical parameters of a comparable brand-new machine.
Technical data:
Max. Radius of the bore steel/cast iron (mm) - 75 / 85 mm
Max. Thread of the bore steel/cast iron - M56 / M68
Max distance between spindle and table - 2000 mm
Min. distance between spindle and table - 390 mm
Conical spi...
Radial drilling machine model GR 616
Manufacturer:INFRATIREA (ROMANIA)
YOM 1985
Main technical data:
Boring diameter capacity in cast: 75 mm
Boring diameter capacity in steel: 60 mm
Quill stroke: 320 mm
Dia. of the column 360mm
Spindle taper: MORSE 5
Work-piece height range: 350-1470 mm
Machinery weight: 4500 kg
Bhyrnhajom
Equipped with one cubic table.
The machine is in working condition.
For more information please contact us.
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.