Radial drilling machine

Girards R3K

Condition: good (used), Manufacturer: MAS Gkedpfoh Eigbox Al Uoc Type: VR 4 Reach: 1000mm Without table!

Condition: new, pressure 80 t stroke 400 mm Gkjdpfx Alovu E T Hj Uec table surface area 920 x 540 mm Motor output 2,2 kW liter capacity 9,0 l dayligth 800 mm tank capacity 31 l daylight between the columns 920 x 300 mm weight of the machine ca. 0,725 t dimensions of the machine ca. 1,45 x 0,85 x 2,45 m Hand and Motor operated. Side-sliding cylinder.

Condition: excellent (used), Year of construction: 1999, power: 3 kW (4.08 HP), total width: 1,100 mm, total length: 2,600 mm, total height: 2,200 mm, table width: 800 mm, table length: 1,150 mm, overall weight: 1,800 kg, Radial arm drill MAS - VO 32 MACH-ID 9618 Make: MAS Type: VO 32 Year: 1999 Arm Length: 1000mm Max. drill Ø cast: 40mm Max. tap Ø: 24M Max. drill Ø steel: 32mm Stroke pinole: 250mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Gkjdpfoy Rznwjx Al Ujc Speeds / ranges: 4500Rpm Table Length: 1150mm Table Width: 800mm Power: 3kW Length: 2600mm Width: 1100mm Height: 2200mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1986, condition: used, pressure 100 t throat 330 mm stroke 10-130 mm no. of strokes 56 Hub/min ram - range of adjustment 80 mm table surface area 830x600 mm ram surface 250x130 mm Gjdpfxolp U Sts Al Uskc table height 870 mm tool hole in ram 50 mm weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2100x1900x3000 mm

Condition: not inspected (used), Year of construction: 1996, bore capacity in steel (diameter) 32 mm morse taper MK 4 base plate 1700 x 700 mm Godpfezb Raiex Al Uokc feed 4 m/min weight of the machine ca. 1,5 t dimensions of the machine ca. 1800 x x1200 x 2480 m

Condition: new, Year of construction: 2026, CORMAK 3040x1300 Radial Drill Press The CORMAK 3040x1300 radial drill press is an advanced industrial machine designed for precise drilling operations in materials such as steel and cast iron. The machine features a robust column construction and a wide range of radial arm adjustments, providing excellent stability and flexibility when machining large workpieces. Its key advantage is the ability to drill holes up to 40 mm in diameter while maintaining high precision. Main advantages of the CORMAK 3040x1300 radial drill press Heavy-duty construction weighing 1400 kg – ensures exceptional stability and vibration reduction, resulting in precise drilling and extended cutting tool life. Adjustable radial arm with a reach of 360–1300 mm – enables drilling in large and irregular workpieces without repositioning, increasing flexibility and reducing setup time. MK4 spindle taper with six speed settings (75–1200 rpm) – allows precise adjustment of machining parameters for different materials, enabling drilling holes up to 40 mm in steel and cast iron. 200 mm spindle stroke – allows deep drilling in a single cycle, improving production efficiency. 2.2 kW main motor – provides high torque for reliable continuous operation with optimized energy consumption. 0.75 kW arm lifting motor – enables smooth and fast vertical adjustment of the radial arm at a speed of 1.3 m/min, improving operator ergonomics. Cube worktable measuring 510 × 380 × 305 mm – allows secure mounting of irregularly shaped workpieces, increasing machining safety and accuracy. Ergonomic control panel – positioned at the front of the machine for intuitive operation and quick parameter adjustment, minimizing downtime. Ground column surface – ensures smooth and precise arm movement, eliminating play and improving positioning accuracy. Manual head and arm locking system – increases safety and stability during drilling by preventing uncontrolled movement. Three spindle feed rates (0.10, 0.16, 0.25 mm/rev) – provide precise control of the drilling process according to the material and machining requirements. Standard equipment B16 drill chuck (3–16 mm) Drill chuck arbor B16/MK4 Reduction sleeve MK4/MK3 Drift key Cube worktable 510 × 380 × 305 mm Operating manual Technical specifications Parameter Value Maximum drilling diameter 40 mm Spindle axis to column distance 360–1300 mm Spindle axis to table surface distance 260–1300 mm Spindle stroke 200 mm Spindle taper MK4 Number and range of spindle speeds 6: 75, 130, 240, 380, 660, 1200 rpm Number and range of spindle feeds 3: 0.10; 0.16; 0.25 mm/rev Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Arm lifting motor power 0.75 kW Worktable dimensions 510 × 380 × 305 mm Machine dimensions 800 × 1800 × 2150 mm Gedpfx Aoi D Daqol Ujkc Weight 1400 kg

Condition: new, Year of construction: 2026, pressing force: 80 t, stroke length: 400 mm, - Capacity: 80 tons - Cylinder stroke: 400 mm Godpfjy T Sntjx Al Uskc - Working width: 920 mm - Electrically or manually operated - Pressure gauge - Emergency stop - 400V

Condition: excellent (used), Year of construction: 1994, tool diameter: 60 mm, spindle mount: MK 5, rotational speed (max.): 1,460 rpm, total width: 1,100 mm, total length: 2,300 mm, total height: 2,400 mm, table width: 580 mm, table length: 1,400 mm, overall weight: 2,700 kg, Arm Length: 1200mm Max. drill Ø cast: 60mm Max. tap Ø: 40M Max. drill Ø steel: 50mm Stroke pinole: 110mm Godpfx Aozvfn Njl Uokc Max. distance spindle - table:1165mm Min. distance spindle - table:300mm Floor / table area: 1400 x 580mm Speeds / ranges: 1460Rpm Spindle Taper: 5ISO/Bt/Mk Length: 2300mm Width: 1100mm Height: 2400mm Weight: 2700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1964, bore capacity in steel (diameter) 65 mm arm length 2000 mm workpiece height max. 1800 mm Gksdpey Swhpefx Al Usc surface area 900x2000 mm turning speeds 1400 U/min The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1995, Used radial drilling machine from Foradia Gkjdpfxoytb Eyj Al Ujc Model: GR 50 1200 Arm length: 1200 mm Drilling capacity up to: 50 mm Year of manufacture: 1995