Used Dmg Nef 400 for sale (395)

Condition: used, Year of construction: 2014, operating hours: 1,760 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 650 mm, spindle bore: 66 mm, spindle speed (max.): 4,500 rpm, rotational speed (max.): 4,500 rpm, swing diameter over cross slide: 380 mm, chuck outer diameter: 210 mm, bar diameter (max.): 66 mm, Equipment: documentation/manual, We offer this used DMG MORI NEF 400 CNC lathe, year of manufacture 2014. type: NEF 400 serial number: 01620009641 year of manufacture: 2014 max spindle speed: 4,500 rpm Hydraulic chuck Swing over cross slide: 380 mm Turning length: 650 mm Siemens ShopTurn 840 D Bar diameter: 66 mm Hydraulic tailstock Cgodpfx Aey Iuvcjnwjt 12-position turret With chip conveyor Only 1,760 spindle hours If you have any questions or would like more information, please feel free to contact us or give us a call.

Condition: used, Year of construction: 2002, turning diameter 400 mm turning length 635 mm control Heidenhain Eltropilot greates pass round over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm drive of main spindle 21 kW max. torque on the spindle 240 Nm main spindle speeds: 25-5.000 turning speed range - C-axis 100 U/min feed power in the axis x + z 3,5 / 7 N rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min total power requirement 44 kva Cgedoy I A U Hopfx Anwot weight of the machine ca. 6 t

Condition: used, Year of construction: 2006, turning diameter 600 mm turning length 1250 mm control Siemens 840D radial face slide travel 320 mm Codpfxjy I A Utj Anwegt turning speed range 5-3.000 U/min Number of tools 8 St. total power requirement 42 kva weight of the machine ca. 5,5 t dimensions of the machine ca. 3,6x2,15x1,95 m

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1704 005, spindle bore: 45 mm, total length: 1,850 mm, total width: 1,100 mm, total height: 1,800 mm, spindle speed (max.): 4,000 rpm, overall weight: 2,000 kg, DMG MORI NEF 360 LZ Lead and Feed Screw Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Connection: 10 kVA - Rated current: 25 A - Distance between centers: approx. 750 mm - Center height over bed: 190 mm Cgjdpoyvql Njfx Anwet - Swing diameter over bed: 380 mm - Center height over cross slide: 120 mm - Swing diameter over cross slide: 240 mm - Spindle bore: approx. 45 mm The machine is equipped with a tailstock, a Multifix tool post, and a HAINBUCH clamping system, diameter: 140 mm, as well as a two-axis digital readout made by DMG MORI. Note: The item must be collected between 12.05. and 22.05.2026 on a date to be agreed upon. FCA D-73235 Weilheim Teck – loaded onto truck.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,504 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 110 mm, overall weight: 20,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D Powerline, number of axes: 7, This 7-axis DMG Gildemeister GMX 400 linear was manufactured in 2004, featuring a maximum turning diameter of 640 mm and a turning length of 1,585 mm. It includes a Sinumerik 840D Powerline control, a milling spindle with a max speed of 12,000 rpm, and a tool magazine with up to 120 positions. If you are looking to get high-quality turn-mill capabilities, consider the DMG Gildemeister GMX 400 linear machine we have for sale. Contact us for more information. Additional equipment • Oil mist extraction • Coolant tank with belt filter system • Internal coolant system with 80 bar pressure • Approx. 30 tool holders Machine Benefits Technical Machine Benefits Cgsdpfxjx D S Dgs Anwjt • Drive power - main spindle: max. Torque 600 nm • B-axis: +/- 120° • C-axis resolution: 0. 001° and 1° • Maximum turning diameter: 640 mm • Turning length: 1585 mm • Standard turning diameter: 400 mm • Distance between centers of main spindle: max. Bar diameter 90 mm • Chuck diameter: 250 mm (max. 400 mm) • Number of tool positions: 12 positions • Turret tool holder: 40 mm din 69880 Extra Information Machine still under power

Condition: good (used), Year of construction: 2008, Vertical CNC Lathe Machine type: Gildemeister CTV 400 V3 Control: Sinumerik 840D powerline (XP) Year of manufacture: 2008 TECHNICAL DATA: X-axis: 700 mm Z-axis: 340 mm C-axis Max. spindle speed: 3,500 rpm Drive power: 47 kW Torque: 1,100 Nm Direct drive Number of turrets: 1 Tool stations: 12 Driven tools: 12 Tool holder: VDI 50 Number of pallets: 15 Accessories: Cjdpfxow Rbcyj Anwegt

Condition: ready for operation (used), Year of construction: 2007, Make: DMG Type of machine: Nef 600 Year of manufacture: 2007 Control system: Fanuc 210 is Machine's weight: 5,5 t Tool holder: VDI 40 x-travel: 320 mm z-travel: 1250 mm Speed range: 3000 U/min Cutting diameter: 600 mm Cgjdpfx Anexnpbqowst Turning length: 1250 mm Overall dimensions: 4000 x 2200 x 2000 mm Tool turret - slots: 8 Pl. Spindle opening: 90 mm

Condition: good (used), Year of construction: 2016, Contact us for more information Cgjdpey Enr Sofx Anwjt

Condition: used, Year of construction: 2017, Technical details: x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm Cedpfsyqybbex Anwegt control: Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds: 20 - 20.000 1/min spindle drive: 25/ 35 kW max. torque on the spindle: 86 / 130 tool taper: HSK-A63 Number of tool station: 60 diameter of tools max.: 70 mm Tool diameter with no neighbouring tools: 170 mm tool length - max.: 450 mm weight of tools max.: 12 kg numbers of pallets: 2 Pallet dimension: 400 x 400 mm max. workpiece diameter: 630 mm workpiece height max.: 900 mm table load: 400 kg rapid travel x/y/z: 60 m/min Feed x/y/z: 60 m/min internal coolant system feed: 70 bar weight of the machine ca.: 8,5 t dimensions: 3200 x 4800 x 2900 mm Accerories Rotoclear window Signal lamp 4 colours Electronic handwheel Probe for tool breakage and length measuring Coolant shower Renishaw probe (spindle) Vorbereitung / preparation only HSK cone cleaning station with brushes Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar. The machine has just received a new milling spindle. *

Condition: used, BASIC DATA Condition: Very good Availability: 01/2025 Machine model: DMG NHX 4000 Year of manufacture: 2017 Operating hours: 41,220 h Spindle hours: 21,663 h Working area: X-axis travel: 560 mm Y-axis travel: 560 mm Z-axis travel: 660 mm Codpfx Aexn Adljnwogt TRANSPORT WEIGHT AND DIMENSIONS Transport weight Machine incl. tool magazine and chip conveyor: 9,300 kg Coolant unit KF 110/700: 1,500 kg Chiller unit: approx. 82 kg Sheet metal parts: 125 kg Documentation and accessories: 60 kg Transport dimensions of the machine incl. tool magazine: Length x Width x Height: 4.20 m x 3.20 m x 2.80 m SPINDLE INFORMATION Spindle specification Spindle type: SK004 motor spindle speedMASTER® HSK-A63 Spindle speed: 20–20,000 rpm Power: 35 kW (40% duty cycle), 25 kW (100% duty cycle) Torque: 130 Nm (40%), 86 Nm (100%) Workpiece weight per pallet: max. 400 kg Pallet size: 400 x 400 mm Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm TOOL CLAMPING SYSTEM AND TOOL CHANGER Tool holder: HSK-A63 Standard: DIN 69893 Form A Clamping mechanism: Clamping: Mechanically by spring force Unclamping: Hydraulically Tool changer: Capacity: 40 tools (ring magazine system) Max. tool diameter: 70 mm (adjacent pockets free), 170 mm (adjacent pockets occupied) Max. tool length: 450 mm Max. tool weight: 12 kg Optional tool changer: Ring tool magazine with 60 pockets (HSK-A63) POWER SUPPLY Voltage: TN-S system, 400 V Power consumption (at 100% duty cycle): Base machine: 45 kVA Coolant unit: 48 kVA Band filter unit: 55 kVA Mains connection rating for Siemens Sinamics S120 16 kW: 0.48 MVA 36 kW: 1.08 MVA 55 kW: 1.65 MVA 80 kW: 2.40 MVA 120 kW: 3.60 MVA COOLING SYSTEM AND CHIP DISPOSAL Coolant: Water-soluble coolant Interface for high-pressure coolant system: Up to 70 bar, compatible with Knoll systems Coolant flushing system: Includes cleaning guns Additional components: Rotating inspection window on the work area door Coolant flushing system for cleaning the machine interior Upgraded cooling system: Larger Bürner filter unit (DMG upgrade, see attachment) MEASUREMENT AND MONITORING SYSTEMS Tool breakage control system in tool magazine Spindle sensor measurement system with Renishaw OMP60 for automatic measurement and centering CONTROL SYSTEM CNC: CELOS® with Siemens 840D sl Operate Control panel: 21.5" ERGOline® Control with multi-touch display Functions: Apps for simplified machine operation as well as for comprehensive management, documentation, and visualization of order, process, and machine data. Networking with CAD/CAM and compatibility with PPS/ERP systems. WORKTABLE NC table: With direct drive technology Minimum indexing: 0.001° Max. rotational speed: 100 rpm DOCUMENTATION AND ADDITIONAL FEATURES Electrical schematics and user manuals in German Languages: Screen texts available in German and English CELOS products DMG MORI NETSERVICE for remote diagnosis SERVICE AGENT for maintenance monitoring MESSENGER for real-time machine status

Condition: excellent (used), Year of construction: 1997, Hello. I have for sale a CNC GILDEMEISTER CTX400E V3 driven tool lathe. TECHNICAL AND VISUAL CONDITION: Very Good. Type: CNC lathe Manufacturer: GILDEMEISTER Model: CTX400E V3 Control: Heidenhain 1190 Country of manufacture: Germany Year of manufacture: 1997 Machine parameters: - head: 12 - tools for VDI-40 toolholders (6 driven sockets) Cedpfsmv Ei Hex Anwjgt - max rpm 5000 /min. - C axis - driven tools - hydraulic tailstock - receiver of finished part - max. turning diameter X axis = 290mm - max. turning length Z axis = 600mm - cooling system - three-jaw hydraulic chuck 250mm - spindle bore Fi-66mm - pass-through spindle - chip conveyor - full programming manual - Mechanical and Electrical Documentation - machine weight: 5.5 tons - the price includes loading on a truck Machine after full inspection. 100% operational. Connected and ready to work. Stal-Com company for 17 years we are engaged in sales, service and training on CNC machines from DMG group. We specialize in all models of Gildemeister lathes and Deckel Maho Machining Centers. All machines undergo a meticulous technical inspection. In addition to customers from Poland, our machines are also bought by customers from all over Europe and parts of Asia. Each machine can be checked during production as we also do machining. After purchasing a machine from our company, we provide training for the crew as well as we can set up the production of details at the customer's site. We cooperate with many companies on a permanent basis to which we provide further machine tools.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, I have for sale a reputable brand CNC lathe GILDEMEISTER CTX 400 V5 With driven tools , 2 x C axis + capture. _ Type: CNC lathe machine Manufacturer: GILDEMEISTER Model: CTX 400 V5 Control: HEIDENHAIN 3190 + TURN PLUS overlay Country of manufacture: Germany Manufacture date: 1999 _ Machine parameters: - head: 12 - tools for VDI 30 toolholders ( all sockets driven ) - max rpm 5000/min. - max length of turning in Z axis: 570 mm - max diameter of turning in X axis: 300 mm - 2 x C axis - driven tools - capture spindle - chuck on main spindle E185 - handle on capture spindle E173 Cgedsu Aardjpfx Anwjt - max. shaft diameter Fi-65 mm - receiver of finished workpiece - tool measuring probe - cooling system - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.7 tons _ WHY IS IT WORTH BUYING MACHINES at PPM ? - we have our own service _ stationary and mobile - we have already sold more than 700 DMG machines - possibility to start up the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines are after professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing. _ www_ppmsc_en _

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Hello I have for sale a reputable brand CNC lathe GILDEMEISTER CTX 400 V3 With driven tools and C axis. _ Type: CNC lathe machine Manufacturer: GILDEMEISTER Csdpfjtw U E Uox Anwjgt Model: CTX 400 V3 Control: HEIDENHAIN 1190 + TURN PLUS overlay Country of manufacture: Germany Year of manufacture: 1997 _ Machine parameters: - head: 12 - tools for VDI 30 toolholders ( every second socket driven ) - max rpm 5000/min. - max length of turning in Z axis: 640 mm - max diameter of turning in X axis: 290 mm - C axis - driven tools - tool measuring probe - spindle holder BERG KH 200 - max. roller diameter Fi-65 mm- finished part pick-up - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM ? - we have our own service _ stationary and mobile - we have already sold more than 700 DMG machines - possibility to start up the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines are after professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing. _ www_ppmsc_en _ Tom_Contact_+48 504 009 641 Paul_Contact_+48 607 305 841

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Hello I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 400 V3 with driven tools and C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 3190 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 2000 _ Machine parameters: - head: 12 - tools for VDI 30 holders (every second socket driven) - max. rpm 5000/min. - max. turning length in the Z axis: 640 mm - max. turning diameter in the X axis: 290 mm - C axis Cgsdpfx Anstpuh Ajwet - driven tools - BERG KH 200 spindle holder - max. shaft diameter Fi-65 mm - finished part collector - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,770 h, functionality: fully functional, machine/vehicle number: NL257181158, turning length: 705 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, swing diameter over cross slide: 742 mm, swing diameter over bed slide: 920 mm, Attention – Images of milling accessories belonging to other machines were mistakenly included in this auction listing and have now been removed. Please refer to the updated scope of delivery as per the current images – approximately half of the accessories shown pertain to this machine. TECHNICAL DETAILS Working Area Swing diameter over bed max.: 920 mm Swing diameter over cross slide max.: 742 mm Max. turning length: 705 mm Bar capacity: 80 mm Travel X-axis: 260 mm Travel Y-axis: 50 mm Travel Z-axis: 795 mm Main Spindle Power: 18.5/15 kW Max. speed: 4,000 rpm Chuck size: 10 inch Spindle bore: 91 mm Front bearing diameter: 140 mm Counter Spindle Power: 11/7.5 kW Max. speed: 4,000 rpm Chuck size: 6 inch Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Shank cross-section: 25 mm Max. speed of driven tools: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Csdpfoy A Nf Iox Anwogt Control: M730UM with CELOS Operating hours: 2,770 h Power-on hours: 10,820 h Dimensions & Weight Machine height: 2,000 mm Installation footprint: 3,347 x 2,106 mm Weight: 5,820 kg EQUIPMENT Y-axis Counter spindle Main spindle with 10-inch chuck Counter spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar loader

Condition: ready for operation (used), Year of construction: 2013, operating hours: 31,460 h, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, table load: 1,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It features an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,040 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Max feedrate: 40,000 mm/min • Table size: Ø 1,040 mm • Through-spindle coolant: 20 bar • Operating mode 4: machining process control (work with open work area door allowed) • Repairs/maintenance: • C-axis seal replaced just after warranty (improved version) • Spindle replaced (05/2021) • Machine measured last year – circular interpolation (Ballbar) within tolerance • Typical use: • Duralumin machining 80% overall • 3-axis: 50% • 5-axis: 40% (up to 10% 5-axis continuous) Additional equipment • Measuring probe: TS649 • Tool probe: Blum Laser • 3D quickSET • Electric handwheel Cedpjyt Rdrjfx Anwjgt • Rinsing gun • Chip conveyor Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2010, operating hours: 8,510 h, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D solutionline, spindle speed (max.): 18,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5-axis DMG MORI DMU 60 monoBLOCK was manufactured in 2010. It features a working area of 730 mm x 560 mm x 560 mm and a rigid table size of 1,000 mm x 600 mm. The machine is equipped with a motor spindle capable of 18,000 rpm and includes a controlled NC swivelling milling head. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Tool clamping: Manual • Swivelling milling head: Controlled NC B-axis with hydraulic clamping • Spindle offset: 100 mm • Swivelling range: -120° / +30° (X-axis travel reduced by 100 mm) • Tool changer: Pick-up system, 24 magazine positions • Table: Rigid, 1,000 mm x 600 mm • Control: Siemens 840D solutionline • 3D path control • 3D machining, 3D tool correction • TRANSMIT lateral surface transformation (milling of cylindrical paths - TRACYL) Cjdpfey Ndklsx Anwsgt • CompCad compressor function for high-speed machining • Operating mode 4 (manual intervention with doors open) • Probing and calibration: • 3D measuring probe • 3D quickSET toolkit for checking/correcting 5-axis kinematic accuracy • Running time: 30,106 hours (spindle: 8,510 hours) • Note: Soft key buttons on the screen sometimes fail; operation may require the machine’s mouse pad or an external keyboard. Additional equipment • Chip conveyor • Optional: 125 SK40 tool holders Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2015, operating hours: 11,223 h, spindle speed (max.): 20,000 rpm, total height: 800 mm, table width: 650 mm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: 530, number of axes: 5, This 5-axis DMG MORI DMU 75 MonoBlock was manufactured in 2015. It features an X-axis travel of 750 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a spindle speed of 20,000 rpm and a tool magazine with 60 positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 MonoBlock universal machining centre we have for sale. Contact us for further details. • Spindle taper: HSK-A 63 • Tool magazine: 60 positions • Internal coolant supply: 20 bar • Machine on hours: 32,851 h • Table type: Integrated swivel rotary table Cgjdpfx Aey Ndg Tenwet Additional equipment • Infrared measuring probe • Electronic handwheel • Chip conveyor • Internal coolant supply system with paper band filter

Condition: good (used), Year of construction: 2013, Main and counter spindle C-axis on main and counter spindle 2 x 12-position turret VDI 40 Y-axis Chuck flushing device Tool monitoring Brankamp Coolant system 980 liters with belt filter Conveyor belt Oil mist separator Cgsdpfxjy Ivyis Anwet Chip conveyor without bar feeder

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed rate X-axis: 40,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 40,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 2,620 mm, total length: 8,400 mm, total width: 3,423 mm, table width: 750 mm, table length: 2,900 mm, table load: 2,150 kg, rotary table diameter: 750 mm, rotational speed (max.): 8,000 rpm, overall weight: 16,000 kg, operating hours of spindle: 8,295 h, coolant supply: 20 bar, spindle motor power: 35,000 W, 5-axis CNC machine (VMC) DMG MORI - DMF 260-7 MACH-ID 9609 Make: DMG MORI Type: DMF 260-7 Control: HeidenHain iTNC530 Year: 2012 Pendel screen to split working area C1 + C2 Duo (NC) Rotary table Ø 750 mm Rotation speed table 50 Rpm indexing 360 Degrees Paper filter with IKZ 40 Bar Rapid feeds in all direction 20.000 mm/Min Work load 8000 Kg Spindel (cutting) hours 8295 H X - Travel: 2600mm Y - Travel: 700mm Z - Travel: 700mm A - Axis: 360000° B - Axis: - 110 to + 110° Table Length: 2900mm Table Width: 750mm Table load: 2150 Cgedpfx Anjy Hq Tnewjt Table Ø: 750mm Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 8000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8400mm Width: 3423mm Height: 2620mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Technical details turning diameter 410 mm turning length 1250 mm control Siemens 840 D ShopTurn total power requirement 60 kVA weight of the machine ca. 7650 kg dimensions of the machine ca. 5400 x 2600 x 2100 m Additional information CNC lathe DMG CTX BETA 1250 with SIEMENS 840D SHOPTURN Spindle hours: 3956 h Machine under power: 14440 h Max. Swing - Ø: 700 mm Max. turning - Ø: 410 mm Clamping length: 1425 mm Turning length: 1250 mm Cgsdsy H Efljpfx Anwet Spindle bore: 95 mm X-travel: 300 mm Z-travel: 1300 mm C-Axis indexing: 360000° Rapid feed X/Z: 30000 mm Feed force X / Z: 4.5 / 7.5 kN Main spindle speed: 4000 rpm Power 100 % ED (40 % ED): 35 (45) kW Max. torque main spindle: 600 Nm C-axis speed: 200 min-1 C-axis torque: 770 Nm Turret positions VDI 40 (DIN 69880): 12 – driven: 12 pcs. Speeds driven tools: 4000 rpm Driven tools power at 2000 rpm: 12 kW Max. torque driven tools: 36 Nm Tailstock cone: MK 5 Tailstock travel: 1200 mm Tailstock rapid traverse: 4 m/min Hydr. Lunette clamping range: 20 - 165 mm, maximum 60 bar Machine dimensions L/W/H: 5400/2600/2100mm Weight: 7650 kg Accessories: - Chip conveyor - Oil dust extraction system - Hydraulic Lunette SMW Autoblock, Type SLU-3 1-ZS - Tool board with tool holder package with rigid and driven tools - Several jaws for 3-jaw chuck Forkardt KS 315 - Tool Eye - Machine documentation

Condition: used, CNC Lathe DMG MORI SEIKI - GILDEMEISTER Type CTX 310 ecoline Machine No. 8044001846E Year of manufacture: 2013 CNC Control: SIEMENS Sinumerik 840D sl Swing diameter over bedway cover: 330 mm Swing diameter over cross-slide cover: 260 mm Centre height max.: 190 mm Centre distance max.: 580 mm Turning diameter max.: 200 mm Longitudinal slide travel (Z-axis) max.: 450 mm Cross-slide travel (X-axis) max.: 160 mm Spindle bore through draw tube: 51 mm Spindle bore through front bearing: 100 mm Spindle speed max.: 5,000 rpm Feed rate X and Z: mm/min. Rapid traverse X-axis: 30 m/min. Rapid traverse Z-axis: 30 m/min. Feed force X and Z: 4,500 Nm Tool turret: 12 stations Driven tool stations: 6 stations Tool holder cylindrical VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Spindle drive motor power at 40% duty cycle: max. 16.5 kW Power supply: 400 Volt, 50 Hz, 21 kVA - CNC control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis chuck position and C1-axis for tool turret - 3-jaw chuck AUTOGRIP Ø 210 mm with 1 set of hard jaws and 15 sets of soft jaws - AUTOGRIP hydraulic hollow clamping device - Clamping force adjustment for regulating clamping pressure - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 driven) - 20 tool holders VDI 30 - Tailstock MK 4 - Indirect measurement system via rotary encoder - Chip conveyor with integrated coolant system - Workpiece residual life display and piece counter as large display on machine enclosure - Control cabinet cooling unit - 9,716 total operating hours (main switch on), of which 3,322 spindle hours as per counter - Operating instructions and manuals Machine footprint with chip conveyor (L x W x H): 4,500 x 2,600 x 2,050 mm Base machine space requirement (L x W x H): 2,900 x 2,150 x 2,050 mm (3,200 kg) Chip conveyor space requirement (L x W x H): 3,350 x 850 x 1,650 mm (500 kg) Codpfx Ansyk Hrgswegt Weight: approx. 4 tons Very good condition

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar Cedpfx Aoymcvmenwegt • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2012, operating hours: 22,398 h, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: HEIDENHAIN, controller model: 530, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This DMG DMU 40 evo Vertical Machining centre was made in 2012 in Germany and has 22398 production hours. It is equipped with a HEIDENHAIN 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. It doesn't have internal cooling but has 30 tools in magazine. Additional equipment • 30 tools in magazine Machine Benefits Technical Machine Benefits Cgsdpfxsy Ic Tcs Anwst • Air blow • Prepared for renishaw • Perfect condition • Full documentation available • No internal cooling

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,316 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, total height: 2,840 mm, table load: 600 kg, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, tool weight: 8,000 g, number of axes: 3, This 3-axis DMG MORI M1 PRO was manufactured in 2022. It features a robust inline spindle with a speed range of 20-12000 rpm and a 24-position automatic tool changer. The worktable supports up to 600 kg with dimensions of 850 × 650 mm. Additional highlights include a Renishaw PP40 probe, 20 bar coolant system, and LED lighting. Ideal for precision machining tasks. Contact us for more information about this machine. Additional equipment • Job Shop package • Renishaw PP40 wireless workpiece probe • TS27R tool measurement probe • Scraper-type chip conveyor • Coolant tank capacity: 200 L (left side) • Coolant pump: 20 bar internal through-spindle coolant • Machine enclosure roof • LED work area lighting Machine Benefits • Table size: 850 × 650 mm • 24-position automatic tool changer with double gripper • Voltage: 3 × 400V Extra Information Cgodpfx Asx D Nigenwet • The machine is in fully functional condition • Tested and confirmed by DMG service report, including accuracy measurements • Complete documentation is available • Currently disconnected from power Dimensions Machine Depth 3065 mm Technical Specification Taper Size SK 40 Through-spindle Coolant Yes