Used Dmg Ctx 310 Eco for sale (409)

Condition: excellent (used), Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, Control: Siemens 840 D Country of origin: EU – Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip pan), 4228x2260x1775 mm (with chip conveyor) Net machine weight: 3400 kg TECHNICAL DATA CTX 310 ecoline V1/V3 New Design Working range - Max. swing over bed: 330 mm - Max. swing over cross slide (X-axis): 260 mm - Max. turning diameter: Ø 200 mm - Chuck diameter: Ø 210 mm - X-axis travel: 182.5 mm Hsdpfx Ahexdiareyofb - Z-axis travel: 455 mm - Centre height: 190 mm - Distance between centres: 581 mm Feed drives - Rapid traverse speed X/Z: 30 m/min - Control: Siemens Sinumerik 840D Slim Line - C-axis with Siemens control - Speed: 0 – 100 rpm - Torque: 112 Nm - Accuracy: < 0.04° Spindle - Spindle nose: 140 h5 mm - Front bearing inner diameter: 100 mm - Spindle bore: Ø 74.3 mm - Max. bar capacity: 51 mm - Main drive with Siemens control - Drive power (40% / 100% DC): 16.5 / 11 kW - Torque (40% / 100% DC): 166.5 / 112 Nm - Max. spindle speed: 5000 rpm Turret - Number of tool stations: 12 - Tool holder: DIN69880 (VDI 3425) - Shank diameter: 30 mm - Tool change (with indexing lock): 0.95 s - Tool change (without indexing lock): 0.4 s - Turret with Siemens control - Number of driven tools: 12 - Drive power (40% DC) at 4000 rpm: 8.4 kW - Torque (40%): 20 Nm - Max. speed: 4500 rpm Tailstock - Automatic stroke: 396 mm - Quill type: flange-mounted - Max. quill axial force: 400 daN Hydraulic unit - Tank capacity: 50 l - Max. pressure: 50 bar Cooling system - Tank capacity: 175 l - Capacity with conveyor: 200 l - Pump power: 0.85 kW - Pump output at 5 bar: 30 l/min Electrical connection - Max. power: 21 kVA - Voltage: 400V - Frequency: 50–60 Hz - Fuses: 33 A Pneumatics - Compressed air connection: 6 bar

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, DMG MORI Horizontal Turning Machine CTX -310V3 ecoline - Year 2010 Controller : MAPPS (Mitsubishi) Max swing dia.330mm Max swing over slide dia. 260mm Max. Turn dia. 200mm Length 450mm Chuck 8" Turret 12 (6 driven tools) C axis indexing Power driven Tools 4,500rpm Hsdsx Ty S Tspfx Ahyjfb Tool setter tail Stock Chip conveyor --- Video upon request

Year of construction: 2004, operating hours: 33,702 h, condition: ready for operation (used), Main Drive Spindle speed range 6000 Spindle bore 73 mm Number of axis 2 Hsdpjx D Rmgsfx Ahyofb Movement X-Axis Movement 213 mm Z-Axis Movement 450 mm Tools Type of tool holder VDI 30 This DMG Gildemeister CTX 310 was manufactured in 2004. A robust horizontal turning machine featuring a max workpiece diameter of 246mm, length up to 445mm, and a spindle speed of 6000 rpm. Includes a 12-position turret and 20 VDI 30 tool holders. Ideal for precise turning operations. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2014, operating hours: 3,324 h, functionality: fully functional, turning diameter: 465 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 3,250 rpm, TECHNICAL DETAILS Max. swing diameter: 680 mm Max. swing diameter over cross slide: 465 mm Max. turning diameter: 465 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm CNC control: SIEMENS SINUMERIK 840D Main Spindle Spindle head: 220h5 mm Bar capacity: 76/90 mm Spindle diameter at front bearing: 140 mm Chuck sizes: 250 mm Drive power (40/100% DC): 33/22 kW (AC) Max. torque (40/100% DC): 630/420 Nm Max. speed: 3,250 rpm Tool Turret Number of tool stations: 12 Driven tools: 6 Tool holder: VDI 40 Shank diameter: 40 mm Drive power (40% DC): 8.4 kW Max. torque: 20 Nm Max. speed driven tools: 4,000 rpm Tailstock Tailstock quill stroke: 850 mm Center taper: MK 4 Tailstock quill force: 1,200 daN Guides Ball screw X/Z axis (D x P): 40 x 10 mm MACHINE DETAILS Machine weight with chip conveyor: 8,100 kg Ergonomic control panel: SlimlinePanel Chip conveyor: hinged belt chip conveyor Coolant pressure: 5 bar High-performance coolant pump: 12 bar Connected load: 50 kVA Frequency: 50 Hz Operating hours: 14,828 h Spindle hours: 3,324 h EQUIPMENT - 12-position tool turret, VDI 40 mount Hsdpfx Asww E Ibehyjfb - Hydraulic hollow clamping device - Sandvik tool kit - Chip conveyor - Self-centering, hydraulic steady rest SLU 3.1 - Mechanical oil mist separator type AFS 600 - Electric sliding door actuation - Tropical package for ambient temperatures up to 50°C

Condition: excellent (used), Year of construction: 2003, operating hours: 9,100 h, I have for sale a CNC LATHE DMG GILDEMEISTER CTX 310 V3 driven tools. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Hfedpfsvxxhfex Ahyjb Model: CTX 310 V3 Control: Heidenhain Data Pilot 4290 Country of manufacture: Germany Year of manufacture 2003 - Number of machine operating hours 9144 hours Machine parameters: - head: 12 - tools for VDI-30 holders + TurnPlus attachment - max. rpm 5000 /min. - C axis - driven tools - hydraulic tailstock - Through spindle - max. turning diameter X axis: 190 mm - max. turning length Z axis: 455 mm - cooling system - hydraulic chuck Three-jaw SMW AutoBlock - spindle bore Fi-50mm - chip conveyor - full programming instructions - Mechanical and Electrical Documentation - Machine weight: 3.8t. - loading included in the price Machine after a full inspection. 100% efficient. Connected and ready to work. WE ALSO TAKE CARE OF ALL PROCEDURES RELATED TO LEASING!!! Stal-Com has been selling, servicing and training CNC machines from the DMG group for 17 years. We specialize in all models of Gildemeister lathes and Deckel Maho Machining Centers. All machines undergo a meticulous technical inspection. Our machines are purchased by customers from all over Europe and part of Asia, in addition to customers from Poland. Each machine can be checked during production because we also do machining. After purchasing a machine in our company, we conduct training for the crew and we can also set up the production of parts at the customer's. We cooperate with many companies on the basis of permanent cooperation to which we supply subsequent machine tools

Year of construction: 2016, operating hours: 4,901 h, condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS turning diameter: max. 330 mm turning diameter: max. 210 mm turning length: 450mm Diameter of passage over facing slide: 260mm bar passage: 51 mm speed of rotation: 5000 rpm Control: Sinumerik 840 D ShopturnSiemens x-travel: 182,5 mm z-travel: 455 mm diameter of spindle bore: 68,5 mm spindle diameter in the front bearing: 100 mm Main spindle hydraulic chuck: Schunk ROTA NCKplus 210-52 spindle head: 140h5 output power 40% ED: 16,5 kW Output power at 100% load: 11kW Torque: max. 166.5 Nm rapid traverse in X and Z direction: 30 / 30m / min turret: 12 tools shank diameter: 30 mm tailstock movement hydraulic: 396mm Center taper: Mk 4 MACHINE DETAILS total power requirement: 21kW machine weight: approx. 3,2t machine dimensions: approx. 4,5 x 2,5 x 2,0m Operating time: 11205 h Operating time: 4901 h Detail counter: 62408 pieces Hfjdpfxel Ax T So Ahysb

Condition: good (used), Year of construction: 2012, DMG CTX 510eco CNC lathe with C-axis and driven tools Year: 2012 CNC controller: SINUMERIK 810D with ShopTurn X-axis travel mm: 300 Z-axis travel mm: 1.050 Turning length mm: 1.050 Max. turning diameter mm: ø 465 Swing over bed mm: ø 680 Swing over cross-slide mm: 465 Bar work capacity mm: ø90 Turret head capacity .: 12 positions (6x driven) Speed ​​driven tools rpm: 4000 Main spindle Max Speed ​​spindle rpm: 3.250 Drive power spindle kW: 33/22 (40%/100% DC) Spindle bore mm: 102,5 Spindle nose: Flat flange (220h5) Maximun torque Nm: 420 (100% DC) Tailstock Tailstock travel mm: 850 Hjdpfx Asxqq Nbjhyefb Tailstock cone: MK5 Length x width x height, mm: 5300x2230x2010 Weight kg: 8100 Accessories/options: Foot switch for chuck open/close Driven tool holders Static tool holders Swarf conveyor Documentations Under power in our warehouse.

Condition: used, Year of construction: 2011, operating hours: 6,000 h, machine/vehicle number: 650000010BE, With C-axis and driven tools Hjdpfxjwg D The Ahyefb MAPPS4/MSX-853 IV control system

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 310 V3 with driven tools, C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control: HEIDENHAIN 4290 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 1999 _ Machine parameters: - head: 12 - tools for VDI 30 holders (Every second socket driven) Hfodjvmy Icopfx Ahyob - max. rpm 6300/min. - max. turning length in the Z axis: 455 mm - max. turning diameter in the X axis: 200 mm - C axis - driven tools - holder on the main spindle: Fi-200mm - max. shaft diameter Fi-51 mm - finished part collector - cooling system - chip conveyor - spindle drive power: 11 KW - DTR - machine weight: 3.2 tons _ WHY IS IT WORTH BUYING MACHINES in PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 2700 mm Measurements depth 5700 mm Measurements height 2100 mm Machine weight 7950 kg Hfedpfjx D S S Dex Ahyeb Control Unit Brand SIEMENS Model SINUMERIK 840D solution line with ERGOline control and ShopTurn, operating system Windows Main Drive Spindle speed range 5000 Spindle bore 87 mm Number of axis 5 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 30 m/min Z-Axis Rapid Traverse 30 m/min Tail Stock Pinol tool taper MT 5 Tools Max weight 7 kg Max tool diameter 80 This 5-axis DMG CTX Beta 1250 TC turn-mill centre was manufactured in 2010. It features a swing diameter of 500 mm, max turning diameter of 390 mm, and a turning length of 1250 mm. The spindle supports up to 5000 RPM and 34 kW power, complemented by a 24-position tool magazine. Ideal for complex machining tasks, consider the opportunity to buy this DMG CTX Beta 1250 TC turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 620, total height: 2,665 mm, total length: 3,250 mm, total width: 2,779 mm, table width: 560 mm, table length: 1,200 mm, table load: 720 kg, overall weight: 4,100 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 9,000 rpm, number of spindles: 1, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Used DMC 1035 V eco for sale – High-performance vertical machining center Upgrade your manufacturing processes with this robust and powerful DMC 1035 V eco from DMG MORI! This vertical machining center is ideal for a wide range of milling tasks and offers outstanding performance when machining a wide variety of materials. Key Features: High rigidity and stability: Ensures precise machining results and a long service life. Large work area: Provides sufficient space for machining large workpieces. High spindle speed: Enables fast and efficient machining processes. Robust construction: Guarantees a long service life and reliable performance. Hfodsx Tg S Tepfx Ahyeb CNC control: Equipped with a user-friendly CNC control for easy programming and operation. Additional Information: Year of Manufacture: 2010 Condition: Good, Used Control: Heidenhain TNC 620 Travel Range: 1,035 x 560 x 510 mm Speeds: 20 - 9,000 rpm Ideal for: General Machining Tool and Mold Making Single-Part and Small-Batch Production Mechanical Engineering Why this DMC 1035 V eco? This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your manufacturing capacity and increase your productivity.

Condition: excellent (used), Year of construction: 2006, turning length: 365 mm, spindle motor power: 10 W, travel distance X-axis: 160 mm, SCHUNCK 160 mm chuck with jaws Full C-Axis 360.000 Driven Live tooling Part catcher Tooling package with 12 Tooling holders 3 x Live tooling AXIAL 3 x Live tooling RADIAL Collet device with inserts Cutting Hours 14.462 H Max. turning Ø: 380mm X-Axis: 160mm Z-Axis: 365mm Spindle bore: 56/42mm Speedrange: 6000Rpm Spindle power: 10kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:5kW Chip conveyor: Yes Pinole taper: 4Mk Stroke pinole: 100mm Quill Ø: 100mm Length: 3800mm Width: 1720mm Hfodex R Szhepfx Ahyob Height: 1670mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840 Dsl Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2013 Control system:Siemens 840 Dsl Turning length:1,185 Swing diameter:540 mm Bar capacity:75 Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush Sub spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush + flush through spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on traveling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:Capto C6 X-axis:450 mm Y-axis:200 mm Z-axis:1,200 mm B-axis:+/- 110° Hfedpfx Ahoxl Nfqjyjb Position sensors:Direct scales (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Automation: Technology:Portal loader with stacking magazine Workpiece diameter:50 - 200 mm Max. workpiece height:230 mm Max. workpiece weight:15 kg Number of stacking attachments:20 Max. load capacity per stacking attachment:40 kg Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Tool magazine:Chain magazine, 120 stations Workpiece measurement:Renishaw touch probe Tool breakage monitoring:Swivel wire Automation:Portal loader with stacking magazine Emulsion mist separator:Mechanical Setup operation:Electronic handwheel Workspace door:Automatic Chuck:2x SMW KNCS 260 Tool holders:Various Capto C6 holders

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 240 mm, spindle speed (max.): 5,500 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 23 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, torque: 192 Nm, workpiece weight (max.): 30 kg, total height: 1,829 mm, total length: 4,066 mm, total width: 2,583 mm, collet bore: 73 mm, bar diameter (max.): 73 mm, swing diameter over cross slide: 290 mm, spindle nose: FL 140h5, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, This DMG MORI CTX alpha 500 V5 from 2015 is in very neat condition and has 7,040 spindle hours on the clock. In 2020, the machine was fitted with a BMO automation, type Iridium Ir 25F, but has seen little production since then. PLEASE NOTE! The 2 panels with laser/motion sensor are not shown in the photo but are, of course, included. This CTX alpha 500 is equipped with: - BMO Iridium Ir25F automation (2020). - LNS Quick Load Servo III bar feeder (2016). - Schunk Rota THW plus powered chuck with quick-change jaw system. - Various top jaws. - DMG CELOS software. - Chip conveyor. Hodpfjx Rqwhsx Ahyofb - Workpiece catcher/ejector. - Tool measurement arm. - Foot pedal for chuck clamping/unclamping. - Miscellaneous tooling (driven & static). - Original DMG documentation.

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW Hfsdpfsw S Efzex Ahyeb dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: ready for operation (used), Year of construction: 2014, operating hours: 27,608 h, controller manufacturer: SIEMENS, This 5-axis DMG MORI CTX beta 800 TC was manufactured in 2014. It features a main spindle speed of 5,000 RPM and a sub spindle speed of 6,000 RPM, along with a 30-piece tool magazine. Ideal for complex turn-mill operations, consider the opportunity to buy this DMG MORI CTX beta 800 TC turn-mill centre. Contact us for further details regarding this machine. Hfsdjx U D Hqepfx Ahyjb • Tools: 30 pcs

Condition: good (used), Description: The machine is in good technical condition and can be tested by prior arrangement. Control system – Siemens, including filtration. Bed inclination, bed material, number of guideways: 45°, cast iron, 3 (4 with Y-axis option). WORKING AREA (V1–V4): - Swing over bed: 19.69" - Swing over cross slide: 11.42" - Maximum turning diameter: 7.87" - Distance between centers: 30.71" - Maximum turning length: 19.69" / 15.82" / 20" - Max. unsupported workpiece weight: 35 lb - Max. overhang from spindle face (unsupported): 165" Hfedpfx Ahjx Apkzoyob - Max. workpiece weight between centers: 100 lb - X-axis travel: 7.48" - Y-axis travel (option): 3.14" (+/- 1.57") - Z1-axis travel: (specify) - Z3-axis travel: (specify) - Spindle center height above floor: 20.67" / 21.65" / 39.26" (38.77" + 1.18") MAIN SPINDLE: - Spindle nose (flat type): FL 140h5 - Chuck diameter: 6.69" (optionally 8.26") - Bar capacity: 2.01" - Spindle bore: 2.87" - Guide bush diameter: 2.05" - Inner diameter of front bearing: 3.94" - Spindle bearing lubrication: grease - Max. power (100/40% duty cycle): 20.82 / 36.20 kW - Speed range (100% duty cycle): 6000 rpm - Speed range (40% duty cycle): 6000 rpm - Rated speed: 1500 rpm - Max. torque (100/40% duty cycle): 93.72 / 125.46 ft*lb - Voltage type, number of ranges: AC/1 - Motor type: ISM52

Condition: used, Year of construction: 2013, Control Heidenhain iT Plus Dimensions (L x W x H) 6,55 x 3,46 x 2,40 m weight of the machine 14.500 kg --> Technical details Operating hours: 43,506 h --> Spindle hours: 25,244 h --> Spindle box left: --> Chuck diameter: 315 mm --> Spindle flange diameter: 1705 mm --> Spindle bore: 104 mm --> Spindle diameter in front bearing: 130 mm --> Drive power (100% duty cycle): 25 kW Hsdpfx Ahoxpizgeysfb --> Drive power (40% duty cycle): 32 kW --> Torque (100% duty cycle): 280 Nm --> Torque (40% duty cycle): 360 Nm --> Speed range: 0–5,000 rpm --> Speed of C-axis: 2,000 rpm --> Spindle box on the right: --> Chuck diameter: 315 mm --> Spindle flange diameter: 1,705 mm --> Spindle bore: 87 mm --> Spindle diameter in front bearing: 130 mm --> Drive power (100% duty cycle): 25 kW --> Drive power (40% duty cycle): 32 kW --> Torque (100% duty cycle): 280 Nm --> Torque (40% duty cycle): 360 Nm --> Speed range: 2,000 rpm --> Right spindle housing: --> Chuck diameter: 315 mm --> Spindle flange diameter: 1705 mm --> Spindle bore: 87 mm --> Spindle diameter in front bearing: 130 mm --> Drive power (100% duty cycle): 25 kW --> Drive power (40% duty cycle): 32 kW --> Torque (100% duty cycle): 280 Nm --> Torque (40% duty cycle): 360 Nm --> Speed range: 2,000 rpm --> Slide 1: --> Longitudinal travel: 1,200 mm --> Cross travel: 490 mm --> Vertical travel Y: ±100 mm --> Slide 2: --> Longitudinal travel: 1,200 mm --> Cross travel: 195 mm --> Slide 3: --> Longitudinal travel: 1,200 mm --> Turning/milling spindle: --> Tool holder: Capto C6 --> Spindle speed: 12,000 rpm --> Drive power (100% duty cycle): 20 kW --> Drive power (40% duty cycle): 22 kW --> Torque (100% duty cycle): 79 Nm --> Holding torque, locked: 1,000 Nm --> Swivel range: ±110 degrees --> Tool magazine: --> Number of tools: 120 --> Max. tool length: 300 mm --> Max. tool diameter: 80 mm --> Max. tool weight: 7 kg --> Tool carrier 2: --> Number of tool stations: 12 --> Shank diameter according to DIN 69880: 40 mm --> Number of driven tool stations: 12 --> Max. speed: 4,000 rpm --> Max. power: 11.3 kW

Year of construction: 2004, condition: excellent (used), Max. turning length: [mm] 600 Turningdiameter: [mm] 246 Bar capacity: [mm] 52 C-Axis 360° Hjdjiq Nb Tjpfx Ahysfb

Condition: good (used), Year of construction: 2009, operating hours: 9,400 h, CNC lathe with C-axis, driven tools + Y-axis + handling DMG - Gildemeister CTX Alpha 500 Siemens 840D sl ShopTurn control Rotation diameter over bed: 500 mm Rotation diameter over support: 290 mm Turning diameter for shafts: 200 mm Turning length: max. 500 mm Travel distances: X 190 mm Y +/- 40 mm Z 525 mm Rapid traverse: X,Z 30,000 mm/min. Y 22,500 mm/min. Spindle nose: 150h5 Spindle bearing diameter: 100 mm Bar capacity: 51 mm Spindle drive power: 20/27 kW Spindle speed: max. 6,000 rpm Spindle torque: max. 170 Nm C-axis: C-axis 0.001° Chuck diameter: 210 mm Tool turret positions: 12 Hfsderx R N Ijpfx Ahyob Driven tool positions: 12 Tool holder: VDI 30 Tool drive power: 5.4 kW Tool speeds: 5,000 rpm Tool torque: max. 18 Nm Automatic tailstock travel: 550 mm Automation/handling system for portal parts: Huber - 3-axis Machine weight: max. 4,650 kg Accessories: C-axis and driven tools. Y-axis for off-center milling/drilling operations. 12-position tool turret. Automatic tailstock. Chip conveyor. Tool package. Automation - HUBER 3-axis gantry parts handling system. With parts magazine. Good condition. 9400 program runtime hours. Offer number L-4860

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, Control Unit Brand SIEMENS Model 840 D Main Drive Tool taper IMS 76 Number of axis 3 Hjdpfxsx D Nd Dj Ahyjfb This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine. Application Types Turning

Year of construction: 2015, operating hours: 48,086 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D Main Drive Number of spindles 2 Hfjdpfex D Ndwsx Ahyob Tool taper IMS 76 Number of axis 3 Tail Stock Pinol tool taper VID 30 Tools Number of station 2x16 This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,265 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D Powerline, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V eco was manufactured in 2011. It features a Siemens Sinumerik 810D Powerline control system, a tool holder SK 40, and a tool magazine with 20 positions. The machine offers a spindle speed of up to 10,000 rpm and a rapid traverse speed of 25 to 30 m/min in X/Y/Z axes. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V eco vertical machining centre. Contact us for more information about this machine. • Tool magazine: 20 positions • Table size: approx. 790 × 560 mm • Coolant: external only; no internal coolant • Notes/condition: Screen may be defective Hodpfxsx D D Hto Ahysfb • Error message during tool change (see images) & contours/drilling patterns can no longer be programmed Additional equipment • 3D probe • Chip conveyor: not included • Internal coolant: not available (external coolant supply only) Dimensions Machine Depth 2050 mm

Condition: ready for operation (used), Year of construction: 2004, operating hours: 31,960 h, Control Unit Brand HEIDENHAIN Main Drive Number of axis 2 Turret Number of turrets 1 Tools Number of station 12 Hedsx Nr T Uopfx Ahyjfb Additional Equipment Bar package with a pick-up device and parts conveyor belt Bar guide for 1.5 metre bars and workpiece stop Hainbuch SK 65 clamping top Indicator light for machine's operating status Cooling unit for air conditioning the control cabinet OPTIONAL: A basic tool kit / A large selection of Hainbuch SK 65 clamping heads This 2-axis DMG GILDEMEISTER CTX 320 linear V3 was manufactured in 2004. A versatile turn-mill centre, it offers robust construction and precision for complex machining tasks. If you are looking to get high quality turning and milling capabilities consider the DMG CTX 320 linear V3 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2006, operating hours: 29,689 h, condition: ready for operation (used), General Data Measurements width 1553 mm Measurements depth 3890 mm Measurements height 1890mm Machine weight 3500 kg Control Unit Brand FANUC Model 180i Main Drive Spindle speed range 5000 rpm Number of axis 2 Movement X-Axis Movement 210mm Z-Axis Movement 450mm Turret Number of turrets 1 Tools Number of index 12 This DMG Gildemeister CTX 320 linear was manufactured in 2006. A reliable horizontal turning machine, it offers robust performance for precision machining. Consider the opportunity to buy this DMG Gildemeister CTX 320 horizontal turning machine. Contact us for more information. Hjdsx D Igkopfx Ahyefb Application Types Turning