Used Dmg Hsc 105 for sale (397)

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530 HSCI, spindle speed (max.): 28,000 rpm, spindle motor power: 55,000 W, This 5-axis DMG MORI HSC 105 universal machining center was manufactured in 2021. It offers advanced capabilities for precision machining. Consider the opportunity to buy this DMG MORI HSC 105 universal machining center. Contact us for more information. Additional equipment • Tool Taper: HSK-A63 DIN 69893 / Tool Magazine: 30-position disk tool magazine, 60-position pickup chain type • Scraper Belt Chip Conveyor and Machine Bed Flushing / Separate Water Treatment Unit: 980-liter tank and paper filter / Pump: 40 bar / 23 l/min for internal cooling through spindle / Extended Chip Flushing / Rotating Inspection Window / Manual Coolant Flushing Gun / Internal Compressed Air Cooling: Through spindle / EROWA Pallet Handling System Preparation • Documentation: English, Hungarian / Display Text: German/Hungarian / Screen Text: German/Hungarian • DMG MORI Monitoring: D-ME406* DMG MORI Messenger V4 / DMG MORI Software Solutions: DMG MORI Service Agent, DMG MORI NETSERVICE, DMG MORI IoTconnector Fpedpfx Aaex D D Tgo Aef Machine Benefits Technical Machine Benefits • Rapid traverse speed: 90 m/min • Mounting surface: Ø 950 mm / b-tilt range: +10/-110° / c-rotation range: 360° / maximum table weight: 800 kg • 3d-controller heidenhain itnc530 hsci / operator interface: smart. Nc • Cooling: active cooling for spindle and linear drive • Mpc machine protection control / direct measuring system: with pressurized air cleaning / active cooling: electrical switch cabinet / additional cooling: external compressed air cooling

Condition: ready for operation (used), Year of construction: 2015, DMG UNIVERSAL MACHINE CENTER HSC 105 Linear Year 2015 Travel : X1.050 Y800 Z 500mm Heidenhain iTnc 530 control Fsdeytpgfepfx Aa Aepf Spindle speed 28.000rpm ATC 32 HSK-A63 Table Ø900mm NC B axis -10o ~ +110o NC C axis 360 x 0.001o Electronic hand-wheel Chip conveyor Direct measuring system.

Condition: used, Year of construction: 2013, x-travel 1.135 mm y-travel 1.050 mm z-travel 750 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 14.000 min/-1 power capacity - main spindel 19 kW Fpedpeyztyaefx Aa Aef max. Torque 100 Nm tool taper HSK-A 63 table surface area 1.400 x 1.050 mm max. table load 2.500 kg max. workpiece sizes 1.400 x 1.240 mm max. workpiece height 750 mm number of toolpositions 30 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 365 / 395 mm max. tool weight 8,0 kg change-time chip to chip 6,1 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min Accelaration 6 m/s² Feed force ( X / Y / Z ) 14 / 20 / 14 kN total power requirement 44 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 6,0 x 5,0 x 3,3 m CNC - MachiningCenter Vertical DMG MORI SEIKI - DMU 105 monoBLOCK - Spindle hours: approx. 9,518 h - Production package: (Chip conveyor, 600 l coolant system, paper belt filter, internal coolant supply 40 bar / 23 l/min through spindle center) - Air Clear: Air curtain for viewing window

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 450 mm y-travel 580 mm z-travel 460 mm Control Heidenhain iTNC 530 Additional information HSC Precision Machining Center HSC 55 linear NEW DMG Design Heidenhain iTNC530 3D Control SmarT.NC User Interface DMG ERGOLine® Control, 19" Screen HSC 55 linear 5-Axis Version Rotary Swivel Table Clamping Surface 400 x 400 mm Swivel Range A-Axis +10/-110 deg.; C-Axis 360 deg. Maximum Load Capacity 200 kg, Absolute Measuring Systems Including Drive Cooling for A and C Axes X = 450 mm, Y = 580 mm, Z = 460 mm 80 m/min Rapid Traverse Spindle Speed 20 – 42,000 rpm For HSK-E50 Tool Holder according to DIN 69893 AC Main Drive with 13/10 kW (40%/100% ED) Tool magazine with 60 positions Chain magazine with double gripper Active cooling unit for main spindle and linear drives Active cooling unit for control cabinet Direct absolute measuring systems including purge air Coolant/air cooling switch Renishaw laser tool measurement for measuring tool length and diameter incl. calibration mandrel with tool holder 3D quickSET Toolkit for checking and correcting the kinematic accuracy of 5-axis machine configurations (only in conjunction with optional probe) PP 60 optical infrared probe Electronic handwheel Application Tuning Cycle (ATC) software Selection of the optimal machining mode for the current operation 20-position pallet tower storage and transfer station Pallet size: UPC 320x320mm Fedpfx Aajyyy Ihj Aepf Loading door and air supply at the worktable Pallet management via machine control Including UPC-P chuck Four-color indicator light Air blower through the spindle center, selectable via M-function and softkey Maintained air with low oil content Dust extraction for graphite Rotating viewing window Operating mode 4 Process monitoring in production Laminated safety glass window

Condition: used, DMG HSC 55 linear is a 5-axis machining center designed for precision, high accuracy and reliable performance. Travels X 450 mm, Y 650 mm, Z 460 mm; A-axis -10/+110°; tool magazine 120 places; tool Ø max 80 mm, length 250 mm, weight 6 kg; spindle taper HSK 63. Spindle speeds 2–28,000 min⁻¹; spindle power 38/28 kW; supply 3x400 V 50 Hz; total power 70 kVA; machine weight ≈9500 kg; dims L3210×W2930×H2900 mm. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and toolmaking. Fpsdpfxeyxn Efe Aa Asf

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, number of slots in tool magazine: 120, total height: 2,900 mm, table length: 400 mm, table width: 400 mm, coolant supply: 40 bar, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, spindle speed (max.): 28,000 rpm, spindle speed (min.): 20 rpm, table load: 200 kg, operating hours of spindle: 39,945 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Scope of delivery: - HSC 55 machine - 3R-WorkMaster II pallet changer (automation) with all pallets - High pressure system / belt filter system (DMG) - Refrigeration unit (OLAER) - chip conveyor Excluded from delivery: - Vices - Tool holder Technical data of machine: - See attached OC (order confirmation) Technical data automation: - Available, on request. Fpsdpou Ivkgsfx Aa Asf

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 11790001067, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 40 kVA, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, total height: 2,600 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 6,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 24, tool diameter: 40 mm, DMG SAUER ULTRASONIC HSC LINEAR 20 HSC Machining Center - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 100 A - Connection: 40 kVA - Input unit X/Y/Z axis: 0.001 mm - Travel measuring system resolution X/Y/Z axis: 0.001 mm - Position tolerance in X/Y/Z axis with direct measuring system: 0.005 mm - Tool holder: HSK-32 E - Max. tool length from spindle nose: 200 mm - Max. tool weight for automatic tool change: 1 kg, total tool weight in magazine: 24 kg - NC rotary table with swivel axis - C-axis clamping surface: 190 mm diameter - Swivel range: 360° - Rotary table speed: 150 rpm - A-axis swivel range: -5/+130° - Loading capacity: max. 10 kg - Including the tool holders shown in the photos in the tool magazine Fsdpfxoyxckvo Aa Aepf - Also includes an additional external tool changer system (30-position) from manufacturer ROBOWORKER, type: LM 100 Note: The machine can be transported on a standard truck! Note: This item is available immediately! FCA D-73235 Weilheim Teck – loaded onto truck

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, table load: 100 kg, spindle speed (max.): 42,000 rpm, number of axes: 5, This 5-axis DMG MORI HSC 20 was manufactured in 2019. It features a maximum spindle speed of 42,000 rpm and a clamping surface of 450 × 400 mm. The integrated tilting rotary table allows for a tilt range of -15° to +130°, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DMG MORI HSC 20 vertical machining centre we have for sale. Contact us for further details. • Fixed table with T-slots • Clamping surface: 450 × 400 mm • Spindle interface: HSK-E32 • Spindle torque: 6 Nm (S1 100%), 7.5 Nm (S6 40%) • Automatic tool changer, pickup system • Tool magazine capacity: 24 tools (HSK-32) or 22 tools (HSK-40) • Air blow through spindle axis • Ethernet interface ready • CELOS control system with Siemens 840D sl Operate • 21.5” ERGOline touchscreen control panel • CAD/CAM connectivity • Compatible with PPS/ERP systems Fpsdpfx Aaoyt Nxzs Asf • 5-axis precision package • Integrated tilting rotary table • A-axis tilt range: -15° to +130° • C-axis rotary table diameter: Ø250 mm • C-axis integrated torque motor • Maximum rotary speed: 50 rpm • 4-color machine status signal lamp • Remote diagnostic capability (DMG MORI NETSERVICE) • IoT connectivity (DMG MORI IoTconnector) • Remote service monitoring (Service Agent) • Machine installation and commissioning included • 3D STEP model for CAD integration • Permanent lubricated spindle Additional equipment • Automatic pallet/part handling automation PH10 • Linear magazine automation system • Pallet capacity: up to 132 positions (ITS 50) or 66 positions (ITS 115) • Maximum workpiece height (automation): 260 mm • Machine transport lifting device • Machine packaged for truck transport

Condition: like new (used), Year of construction: 2009, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, controller manufacturer: HEIDENHAIN iTNC530, workpiece weight (max.): 15 kg, table width: 200 mm, table length: 200 mm, spindle speed (min.): 42,000 rpm, Control CNC: HEIDENHAIN iTNC530 Axes X-axis travel mm: 200 Y-axis travel mm: 220 Z-axis travel mm: 280 C-axis degrees: 360º A-axis degrees: -15º max.130º Work Table Table dimensions mm: ø200 Maximum workpiece weight kg: 15 Spindle Spindle speed rpm: 42.000 Cooling Cooling through the spindle bar: 40 Fpjdjxpg H Hjpfx Aa Aef Tool System Tool holder: HSK-E32 Tool magazine slots: 60 Max. tool diameter mm: ø50 Max. tool length mm: 200 Chip-to-chip time s: 10 Equipment Automation LM100 (EROWA ITS72, 5 levels of 9 positions); 10 kg maximum manipulation Electronic handwheel Chip conveyor Infrared probe High-pressure pump NC rotary tilting table Rated power kVA: 40

Condition: good (used), Year of construction: 2008, Universal Machining Center Machine type: DMG HSC 75 linear Control unit: Heidenhain i-TNC530 Year of manufacture: 2008 New spindle: 2025 Operating hours: 63,133 h Spindle hours: 28,596 h TECHNICAL DATA: Traverse paths: Fedpsyq H Arefx Aa Aopf X-axis: 750 mm Y-axis: 600 mm Z-axis: 560 mm Feed rate (X/Y/Z): 90 m/min Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min A-axis: -10° B-axis: +110° C-axis: 360° Spindle speed range: 28,000 rpm Tool changer Tool holder: HSK-A63 Tool stations: 60 Tool diameter: 80 / 140 mm Tool length: 300 mm NC rotary table: Ø 750 mm Max. table load: 800 kg Table size: fixed table: 950 x 650 mm Max. table load: 1,000 kg Equipment features: Chip conveyor

Condition: ready for operation (used), Year of construction: 2009, Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, rotation range C: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, tool holder: HSK-E50, spindle speed: 42000rpm, max. workpiece weight: 200kg, feed: 80m/min, max. tool length/diameter: 250mm/80mm. Machine dimensions X/Y/Z: approx. 3250mm/2950mm/2900mm, weight: approx. 9500kg, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. The machine is located in China. Fpedpfx Asxf Ii Uea Aof

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Fsdpfxow Hxiws Aa Aepf Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system c/w tooling ----- Clearance Sales -----

Condition: ready for operation (used), Year of construction: 2022, operating hours: 113 h, functionality: fully functional, machine/vehicle number: AL150210302, turning length: 336 mm, turning diameter: 440 mm, spindle bore: 61 mm, spindle speed (max.): 6,000 rpm, controller model: DMG MORI COMPACT LINE, No reserve price – guaranteed sale to the highest bidder! Only 113 operating hours! TECHNICAL DETAILS Turning length: 336 mm Turning diameter: 440 mm Maximum bar diameter: 52 mm Swing over bed: 620 mm Swing over cross slide: 465 mm Spindle speed (max.): 6,000 rpm Number of spindle speed ranges: 1 step Spindle bore diameter: 61 mm Spindle bearing inner diameter: 100 mm Tool shank diameter for square tools: 20 mm Tool shank diameter for boring bars: 32 mm X-axis travel: 260 mm Z-axis travel: 375 mm X-axis rapid traverse rate: 30,000 mm/min Z-axis rapid traverse rate: 30,000 mm/min Fjdpfx Ajytbqvea Ajpf Number of tool magazine positions: 12 MACHINE DETAILS Control model: DMG MORI COMPACT LINE Frequency: 50 Hz Operating hours: 113 h EQUIPMENT Coolant system Chip conveyor

Condition: not inspected (used), Year of construction: 2007, operating hours: 43,558 h, functionality: unexamined, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle speed (max.): 5,000 rpm, spindle bore: 118 mm, controller model: SIEMENS SINUMERIK 840 D POWERLINE, distance between spindles: 900 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates the buyer to collect the item within the specified time frames: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 3,200 rpm Swing diameter: 270 mm Turning diameter: 120 mm Maximum bar diameter: 100/104 mm Spindle bore diameter: 118 mm Distance between spindles: 900 mm Travel X1-axis: 290 mm Travel Z1-axis: 650 mm Travel X2-axis: 180 mm Travel Z2-axis: 650 mm Travel Y1-axis: ±40 mm Travel Z3-axis: 670 mm Travel X3-axis: 175 mm Rapid traverse X/Z-axis: 30 m/min Rapid traverse Y-axis: 15 m/min Number of tool turrets: 2 Number of tools per turret: 12 Fpodpeym A S Iofx Aa Aef All tool positions are driven MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D POWERLINE Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,500 x 2,500 mm Machine weight: 11,000 kg Operating hours: 88,040 h Spindle hours: 43,558 h EQUIPMENT Chip conveyor Foot switch Note: The machine has the following defects: - The B-axis is defective (located on turret 1) - The guideways and drives are worn in line with the machine’s age - The X2-axis (guide rails) runs slightly out of alignment in the range of 0.03 mm (re-measurement required) - Setting the reference values for the axes in the control system is not functioning - The hydraulic pump was replaced by a spare pump after failure and is now set up externally as a separate unit External reference: Bilstein - Lot 2

Condition: not inspected (used), Year of construction: 2008, operating hours: 39,361 h, functionality: unexamined, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, controller model: SIEMENS SINUMERIK 840 D, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item within the specified timeframe, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter: 640 mm Maximum turning diameter: 640 mm Maximum turning diameter (sub spindle): 400 mm Spindle distance: 1,500 mm Turning length: 1,185 mm Max. workpiece weight: 150 kg Slide travel X1: 550 mm Slide travel Y1: 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm Max. milling spindle speed: 12,000 rpm Max. main spindle speed: 4,000 rpm Max. sub spindle speed: 3,200 rpm Rapid traverse rate, Slide 1 (X/Y/Z): 40 / 24 / 70 m/min Rapid traverse rate, Slide 2 (X/Z): 24 / 36 m/min Rapid traverse rate, Slide 3 (Z): 36 m/min Tool holder: HSK 63 Number of tool positions in chain magazine: 40 MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 7,800 x 4,100 x 3,040 mm Machine weight: 16,500 kg Operating hours: 72,899 h Spindle hours: 39,361 h Bar feeder Model: COCCHE GIOVANNI CNC-DB 110 Year of manufacture: 2008 Serial number: CNCDB-08.306 Weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty and requires repair. - The Q2 axis (milling spindle tool changer) fails more frequently. Fpodpfjym A D Rjx Aa Ajf - The X2 axis (guideways) moves slightly askew. - The guideways and drives show age-appropriate wear. External Reference: Bilstein – Lot 1

Condition: used, Year of construction: 2016, operating hours: 7,993 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, overall weight: 4,500 kg, Control SIEMENS CELOS 840SI OPERATE MULTI TOUCH Hours Fpodpex Ivumsfx Aa Aef POWER ON 18,527 h SPINDLE ON 7,993 h Speed 14,000 rpm Magazine 30 pcs. Accessories - Measuring probe TS649 - Chip conveyor - Transformer Video available.

Condition: like new (used), Year of construction: 2011, measuring range X-axis: 100 mm, measuring range Z-axis: 1,000 mm, mount diameter: 100 mm, overall weight: 160 kg, path measurement accuracy: 2 mm, tool weight: 160,000 g, Year of construction: 2011 Fully automatic with manual options Intuitive input of automatic measurement cycles Wear-free and maintenance-free linear motors Flexible control console From manual to fully automatic Low distortion even under the maximum permissible load thanks to its high installed weight FEM-optimised and thermally stable cast iron construction RFID – data carrier system Customer-specific data storage Measurement processes with integrated data retrieval and storage Integration of all popular RFID systems The read / write head can be positioned automatically and manually for all popular tool holder systems Technikal data Length and diameter up to 1,000 mm Max. tool diameter for measuring according to snap gauge principle 100mm Maximum tool weight 160 kg Tool holder SK50 (additional holders availale from company HAIMER/Microset) Concentricity at the spindle nose 2 μm Repeatability ±2 μm Tool preseting Fedpfx Aajyzzb Ss Aspf Quick and precise measuring results thanks to intuitive operation Accurate measurement values for complex and helical cutters with the precise focus window User administration and access privileges Display currently in 16:9 format Cross hair fixed / floating with automatic measurement lines and automatic contour evaluation One design for the software of all equipment classes Windows 7 Professional or Ultimate, whatever you need Data exchange Post-processed data is transferred to the relevant data exchange drive either via the network or via USB. All equipment can provide tool data to almost any software (tool management, databases, CAD / CAM) via a bidirectional interface – irrespective of whether.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Technical details turning diameter 356 mm turning length 510 mm control M 730 BM travel -x axis 260 mm travel -y axis -50 / +50 mm travel -z axis 590 mm Travel subspindle (B) 624 mm bar material dia. 65 mm main spindle speeds: 5000 transmission ratio 2 power capacity 15 / 11 kW Subspindle spindle speeds 6000 power capacity 11 / 7,5 kW rapid traverse (X,Y,Z,B) 30/10/30/30 m/min weight of the machine ca. 6,6 t Additional information * CNC control Mitsubishi M 730 BM * Mainspindle with 3-jaw power chuck KITAGAWA N-08, diameter 210 mm * Subspindle with 3-jaw power chuck HAINBUCH B-TOP 165-43 * 12-station turret, tool spindle speed 10000 rpm, power 5.5/3.7 kW * Y-axis travel * C-axis * High/low pressure chuck system for main and subspindle * MABEO high-pressure pump with 1.5 MPa filter unit Fodpfxsyzzi No Aa Ajpf * Coolant sprayer on the chuck for main and subspindle * Coolant sprayer for the machine bed cladding * Oil mist separator * Chip conveyor * Renishaw workpiece measuring system with optical signal transmission, subspindle * Cooling of the ball screw in the X-axis * Gantry loader, left-hand installation, 14-station storage, 20-pallet workpiece storage, Double gripper conveyor

Condition: used, Year of construction: 2002, travel -x axis 880 mm travel -y axis 630 mm travel -z axis 630 mm control HEIDENHAIN - TNC 426M number of spindle speeds 12.000 U/min numbers of positions in the tool changer (2 x 16) 32 Tool bore SK 40 surface area 1.250 x 700 mm table load 600 kg Milling machining centers - universal | DMG - DMU 80T equipped with B axis The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 80 T | 80-T Fjdpoyzt Aujfx Aa Aspf

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 6,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 450 mm, controller manufacturer: SIEMENS, number of axes: 3, This 3-axis DMG CTX 310 was manufactured in 2004. It features a maximum workpiece diameter of 246 mm and a maximum workpiece length of 445 mm. The machine offers X-axis movement of 213 mm and Z-axis movement of 450 mm, along with a spindle speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTX 310 horizontal turning machine we have for sale. Contact us for further details. • Max. workpiece diameter: 246 mm • Max. workpiece length: 445 mm • Spindle bore: 73 mm • Turret: 12 positions Fodpfx Aaeyz Utne Aspf Technical Specification Taper Size VDI 30 Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,396 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 600 mm, table length: 850 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details. • Condition: Used (good) • Operating hours: 24396 h Fpodsyz Tkfjpfx Aa Ajf • Electrical: • Nominal power: 39 kVA • Voltage: 400 V • Frequency: 50 Hz • Secondary voltage: 230 V • Control voltage: 24 V • Current: 63 A • Current (max): 56 A • Rapid traverse: • X: 70 m/min • Y: 40 m/min • Z: 40 m/min

Condition: ready for operation (used), Year of construction: 2021, operating hours: 14,400 h, spindle motor power: 13,000 W, spindle speed (max.): 6,000 rpm, controller manufacturer: SIEMENS, controller model: 840D with ShopTurn 3G, number of axes: 3, This 4-axis DMG MORI CTX Alpha 500 V6 was manufactured in 2021. A versatile turn-mill centre featuring a Siemens 840D controller, ERGOline interface, and CELOS manufacturing support. It offers a 470 mm machining length, 6000 rpm max speed, and a 12-position Sauter turret with live tooling. Ideal for complex machining tasks. Contact us for more information about this machine. Fedpfx Aeyz Al Sja Aepf Additional equipment • CELOS Products • DMG MORI Service Agent • DMG MORI NetService • DMG MORI IoT Connector • DMG MORI Messenger V2 SERVICE Camera • Tail Stock • the 2 SMW-Autoblok BBD17/52 which can also be seen on the machine chuck. • and the addition of the software (tccentric turning and milling cycle, as well as a deburring toothing cycle). Machine Benefits Technical Machine Benefits • Hydraulic cylinder with Ø52 mm through-hole • 12-position sauter turret • Vdi 30 tool mounting (din 69880-30) • Live tool interface (din 5480 standard) • Direct measuring scale on the x-axis • Tool system for turret: trifix® system (din 69880, vdi 3425, din 5480) • Y-axis: ±40 mm travel Extra Information Main Spindle Chuck SMW-Autoblok BBD 170/52 Counter Spindle Chuck SMW-Autoblok BBD 175/52 Counter Spindle Option Programmable tailstock force: Adjustable between 80-300 daN Media Coolant filtration: Dual-cartridge filter (50 μm) Coolant cleaning: External flushing system for spindles Coolant tank with 6-bar pump Automation Bar machining package: Fully hydraulic cylinder Ø52 mm Workpiece catcher with conveyor for parts Ø51 × 185 mm (max 3 kg) 4-color operating mode signal light Bar loader interface compatible with IEMCA, Breuning IRCO, LNS

Condition: good (used), Year of construction: 2007, operating hours: 24,276 h, Gildemeister Lathe NEF 600 Year of manufacture: 2007 Control: Heidenhain Plus Max. turning diameter: 600 mm Centre distance: 1,250 mm Swing over bed: 600 mm Cross travel: 320 mm Main spindle: Speed range - main spindle: max. 3,000 rpm Spindle bore: 90 mm Chuck diameter: 320 mm Tool turret: Number of tool positions: 8 positions Total power requirement: 42 kVA Machine weight approx.: 5.0 t Space requirement approx.: 3.6 x 2.14 x 1.95 m Accessories: Rinsing gun, Schunk chuck 315 mm, Tailstock MK 5 Fjdpfjykbk Rex Aa Aspf

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,426 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 268 mm, travel distance Z-axis: 600 mm, spindle motor power: 25,500 W, overall weight: 5,500 kg, controller manufacturer: SIEMENS, controller model: SLIMline multi-touch, number of axes: 3, This 3-axis DMG MORI CLX 450 V3 was manufactured in 2022. It features a maximum turning diameter of 400 mm and a Z-axis travel of 600 mm. The machine is equipped with a powerful spindle capable of 4000 rpm and includes 12 driven tool stations for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V3 horizontal turning machine we have for sale. Contact us for further details. • Version: V3 (no Y-axis); configured for turning + milling (C-axis) • Working area: • Swing over bed: 650 mm • Swing over cross slide: 465 mm • Max. turning diameter: 400 / 315 mm • Rapid traverse X/Z: 30 / 30 m/min • Axes: X, Z, C; C-axis positioning accuracy: 20 arcsec • Main spindle: • Spindle nose: A2-8 • Bar capacity: 80 mm • Front bearing diameter: 130 mm • Chuck diameter options: 210 / 250 / 315 mm • Spindle power (40% / 100%): 25.5 / 17 kW • Max. torque (40% / 100%): 426 / 283 Nm • Turret (VDI 40): • 12 stations (12 driven) • Tool station diameter: 40 mm • Driven tool power: 5.44 kW • Driven tool torque: 20 Nm • Driven tool max speed: 4000 rpm • Tailstock: • Travel: 500 mm • Center interface: MK5 • Max. force: 8 kN • Guideways / Ballscrews: X/Z 40 × 10 mm • Accuracy: Positioning accuracy X/Z: 5 / 10 µm • Capacity / Workholding: • Max. bar capacity: 80 mm • Hydraulic chuck: Ø 254 mm (installed) • Chuck bore: 82 mm • Coolant & chip handling: Coolant gun 5 bar; Chip tank • Control: Siemens SLIMline multi-touch (19") • Dimensions & weight: • Weight without chip conveyor: approx. 4950 – 5050 kg • Weight with chip conveyor: approx. 5500 kg • Notes: Full 12 driven tool stations Additional equipment • Chip conveyor (right-side discharge) • Hydraulic tailstock (M-function controlled) • Direct measuring system (X-axis) • External electronic handwheel • DMG MORI IoTconnector • Marposs tool probe • Signal tower (4-color) • Set of static tool holders VDI 40 • Set of driven tools WTO (QuickFlex, ER32) Fedpeyzq T Rjfx Aa Ajpf Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2021, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 6.944h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> Fodpfjwf D Szex Aa Aepf This can be purchased separately An extensive tool package is included. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36