Used Alpine Mills for sale (32)

Condition: used, machine/vehicle number: 11796, Rotor diameter: 250 mm Rotor width: Rotor blade: 3 Stator knife: 4 Inlet cross-section approx. 250 x140 Drive motor: 5.5 kW Gedpswbwunsfx Aftekf

Condition: used, machine/vehicle number: 11795, Rotor diameter: 250 mm Rotor width: Rotor blade: 3 Stator knife: 4 Inlet cross-section approx. 250 x140 Gjdpowbwvxofx Aftokf Drive motor: 5.5 kW

Condition: used, machine/vehicle number: 10875, 3-blade rotor 2 rows of stator blades Rotor diameter: 280 mm Rotor width: 600 mm Inlet cross-section: approx. 280 x 600 mm Gkodpfx Afjghgfzjtsf Weight: approx. 800 kg

Condition: used, machine/vehicle number: 11647, Rotor blade row: 3 Gkodpeghgqzofx Aftsf Stator blade row: 2 Rotor width: 280 mm Rotor diameter: 280 mm Inlet dimensions: 300 x 300 mm

Condition: used, machine/vehicle number: 11634, Rotor diameter: 600 mm Rotor width: 1000 mm 6-knife rotor - cross shear cutting rotor 2 stator knife rows Inlet cross section approx. 650 x 100 mm Drive motor 75 kW Gkjdpjghgqdofx Aftef Machine features: The cross-shear cutting rotor ensures optimum material intake as well as distribution and thus high outputs with reduced energy consumption. Electro-hydraulic opening of the mill top and the screen basket. The sieve insert can be rotated 180° and reused after one-sided wear. Adjustment of the rotor knives outside the mill by means of an adjustment device reduces downtimes.

Condition: used, Used Alpine Model 630AFG stainless steel Aeroplex fluidized bed opposed jet milling system. Stainless steel classifier wheel belt driven by 15kw, 400/690volt, 2/50, 2940rpm motor. Unit includes (4) jet nozzles. Includes product feeding vessel approx 230 litre capacity with stainless steel screw feeder driven by 1.5kw, 400volt, 3/50, 1440rpm motor. Unit all mounted on common mild steel frame. Specifications: Motor Power: 20.1 hp Gkedpfx Aexyxlceftof

Year of construction: 2014, condition: used, Power: 6 kW (8 HP) Manufacturer: Hosokawa Hosokawa Alpine Model: Contraplex 160 C Year : 2014 Type : pin mill + associated equipment Documentation : Hosokawa Alpine Contraplex 160 C Fine impact mill with two driven pin discs Motor power (frame side) : 7,5 KW Pin speed (frame side) : 16 500 rpm Gkjdpox Avcqsfx Aftef Number of rows of spindles (frame side) : 3 Motor power (door side) : 5,5 KW Pin speed (door side) : 12 000 rpm Number of rows of spindles (door side) : 2   Powder transfer Bohle MCL 300 container + stand Forced convection vacuum system Unloading hopper Handling trolley  

Condition: good (used), Year of construction: 1985, greates pass round over bed 810 mm swing diameter over face slide 560 mm centre distance 00 mm bed width 480 mm slide valve travel 400 mm upper head travel 180 mm turning tool - shaft cross cut 32 x 25 mm power capacity 22 kW max. torque on the spindle 30 Nm spindle head Gr. 11, DIN 55027 spindle diameter in front bearing 152,4 mm spindle bore 106 mm turning speed range 9 - 1800 U/min turning speeds 24 longitudinal feeds: 0,092 - mm/U face feeds 0,046 - mm/U metric threading 0,5-112 mm inch threading 1/4 - 56 G/1" thread - module mm thread - DP 1 - 224 Pitch tailstock quill diameter 115 mm quill stroke 225 mm taper of tail spindle MK 6 max. workpiece weight between centres 00 kg Gsdpfx Afoxn Ty Retokf max. workpiece weight -without tailstock 750 kg 3-jaw chuck Röhm, Ø Overall size ca. 4600x1900x1600 mm weight ca. 4300 kg

Condition: good (used), Technical data for pallet rack beam: Racking system: Voest Alpine Type: Megastar GS Included in delivery: 01x pallet rack beam, used Material finish: hot-dip galvanized Gkjdpfx Afjxb Dqgstsf CS profile: 100 x 50 x 10 mm Hook bracket: 4 HK (hooks) Clear span: approx. 2,700 mm 02x locking pins, used Design: completely galvanized For securing the cross beams Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipment of this item is required, this will incur additional costs, which can be requested from us separately depending on the delivery location and scope of delivery.

Condition: used, No. 10025 Cutting mill Alpine RO 40/63 Used According to our customer, the machine is fully functional and can be inspected on site Motor power 30 kW Rotor diameter 630 mm Rotor width 400 mm Rotor knives 5 rows with 3 knives each Stator knives 1 row with 3 knives to the front and 2 rows with 3 knives to the rear Maximum permissible speed of the drive shafts 560 rpm The cutting mill Alpine RO 40/63 with patented cross-shear rotor guarantees optimum material distribution with maximum cutting performance. The hinged screen holder allows easy removal of the screen and perfect access for cleaning the machine and replacing the blades. Ideal for industries such as recycling (for blown film, cables, plastics, etc.) and food (tea, spices, dried vegetables, etc.). Gsdpfx Ajxph Avoftokf Sale on behalf of customer, ex location near 72072 Tübingen, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), VOEST DA 360 – Lead and Feed Screw Lathe -Heidenhain digital readout -Center height over bed: 400 mm -Swing diameter over bed: 800 mm -Swing diameter over cross slide: 500 mm Gjdpfex Auldjx Aftokf -Turning length: 1,000 mm -Spindle bore approx. 87 mm -Speed range: 14 – 1,000 rpm / 18 speeds -Automatic longitudinal and cross feeds -Automatic Z-axis infeed -Tailstock Morse taper 5 -3-jaw wedge-type chuck 250 mm -Multifix base holder with insert -Work lamp -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3,500 kg Subject to errors or input mistakes.

Condition: used, Year of construction: 1994, turning diameter over cross slide: 200 mm, turning diameter over bed slide: 410 mm, turning length: 950 mm, metric thread diameter (max.): 140 mm, bed width: 330 mm, overall weight: 2,100 kg, Voest Lathe Model: E 35 / S3 For chuck and shaft machining, equipped with variable drives and cycle automation Spindle nose: DIN 55027/6 Spindle diameter at front bearing: 90 mm Operating voltage: 380 V / 50 Hz Chip guard wall with comprehensive, movable splash guard hood Chuck guard with safety interlock end switch Machine light Multifix quick-change toolpost, size B Coolant system Operating key(s) Tailstock taper: MT 4 Spindle bore: 54 mm Main spindle internal taper: MT 6 Metric threads: 0.5 – 140 mm Inch threads: 1/4 – 56 TPI / 1" Module threads: 0.125 – 28 DP threads: 1 – 224 Number of thread leads: max. 50 AC drive with 2-speed gearbox Motor power S1/S6: 9.0 / 7.5 kW Total speed range (2 steps): 1 – 3000 rpm Max. spindle torque: 700 Nm Three-phase servo drive Longitudinal feed force: 6.0 kN Gksdpjx Aqrasfx Aftjf Cross feed force: 3.0 kN Feed range longitudinal/cross: 0 – 10 mm/rev Rapid traverse longitudinal/cross: 7 / 3.5 m/min

Condition: used, Field of application: Mining Gksdpfx Aex Atmajftjf Technical documentation Description of the unit Micronisation unit - Bepex Pulvocron PCS 10 mill and classification The Pulvocron air classifying mill utilizes high-speed impact and internal particle size classification to produce fine powders with a narrow size distribution. Adjustable operating conditions, including tip speed, air flow, and classifier speed provides control over resultant particle size, material temperature, and capacity. Thermally conditioning the inlet air stream provides optional heating to simultaneously dry and mill wet solids, or cooling to reduce resulting material temperatures. Air and powder filtration / recycling system. – Product filtration and collection cyclone – Explosion proof valve – Rotary air / product sealing valve – Product recovery hopper Additional information Regular maintenance and servicing. Full Documentation available. Incomplete electrical and safety control cabinets. These items can be quoted separately.

Condition: used, Year of construction: 1990, functionality: fully functional, turning diameter over cross slide: 570 mm, turning diameter over bed slide: 340 mm, spindle speed (max.): 2,500 rpm, The machine operates fully. The machine bed is in excellent condition. Runs very quietly. Gkedpfsw E D Rqex Aftsf

Condition: refurbished (used), Year of construction: 1981, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 52 mm, turning diameter: 420 mm, center height: 210 mm, turning length: 1,000 mm, total length: 2,300 mm, total width: 1,300 mm, total height: 1,700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 33 rpm, quill mount: MK 4, Machine Equipment / Highlights Gksdsxqpwkspfx Aftsf Heidenhain ND 780 digital position display Röhm 3-jaw chuck, Ø 250 mm Multifix quick-change tool holder Coolant system for efficient machining Chuck guard for increased safety Chip guard rear wall for a clean working environment Year of manufacture: 1981

Condition: used, Year of construction: 1982, centre distance 3000 mm center height over slide 250 mm center height over bed 400 mm clamping diameter 450 mm turning speeds 7-2240 U/min feeds - fine adjustment 0,015 mm/min Gsdsucgyxspfx Aftskf face 0,015 m/min output 33 kw

Condition: used, Sturdy feed hopper Working area: 800 x 2,200 mm Gjdpfx Afju Dhncstjkf Electric motor, gearbox, eccentric reduction gear on a sturdy base frame

Condition: good (used), Year of construction: 1989, Vertical crushing plant Voest Alpine ZS 100 Basic year of construction 1989 (machine/rotor completely overhauled) Machine number 89 914 04 incl. drive motor 145 KW Gsdeu U Ukispfx Aftjkf

Condition: used, A used well preserved guillotine shear Vöest Alpine cutting length: 2010 mm cutting capacity in steel up to 370N/mm² tensile strength: 5 mm strokes per minute: 50 H/min Hold down pressure: 30 bar Gkedpfx Aepgmpdoftsf number of hold-downs: 8 pcs. backgauge manually adjustable: 950 mm throat depth: 150mm dimensions: LxWxH 280x190x140cm weight: 2500 kg

Year of construction: 1988, condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Gkjdpfx Afjma Snxjtjf

Condition: used, Year of construction: 1971, turning diameter over bed 500 mm turning diameter over slide rest 340 mm turning length 1000 mm turning diameter in the gap 650 mm turning speeds 21 - 1500 U/min Gksdpfx Afovu Hbxstef centre height 250 mm spindle bore 46 mm total power requirement 5,5 KW weight of the machine ca. 1,45 t dimensions of the machine ca. 2,3 x 1,1 x 1,7 m Lead and feed spindle lathe - 4-jaw chuck 250mm - Multifix Quick-change tool holder - second steel holder on support - Steady rest - Chip tray - Machine light - Documentation

Condition: good (used), Vöest-Alpine Jaw Crusher . Type: STE 4025 K . Gedpfxjmnq Dqe Aftjkf Mach. No.: 70310010 . 400 x 250 mm. . With Electrical motor.

Condition: good (used), Type: SVA100300/1 Screen area: 1,000 x 3,000 mm Gkjdpfet Sr Ihjx Aftef Sturdy semi-mobile steel construction with discharge chutes and discharge trough

Year of construction: 2006, operating hours: 8,830 h, condition: good (used), functionality: fully functional, machine/vehicle number: R1153413, Alpine mill including complete plant for sale Cutting mill: Rotor diameter: 600 mm Rotor width: 1000 mm 6-knife rotor Year of manufacture: 2006 Gjdjxd Aiaepfx Aftskf Included: Material feed belt (designed for automotive bumpers), mill, conveyor line for packaging into octabins or big bags, dedusting system. Condition: Very well maintained, regularly and promptly serviced Inspection: In operation until recently, currently still powered and available for on-site inspection at any time Ready for operation: Immediately available and fully functional The machine is in very good condition and is ready for immediate use.

Year of construction: 1986, condition: good (used), machine/vehicle number: 2057, Hosokawa Alpine ZPS 315 classifier mill Universally applicable for materials up to a Mohs hardness of approx. 3.5 with requirements for very high final fineness with the lowest possible energy input. Classifier mill for high finenesses, cool grinding and flexible production parameters in the fineness range from less than 5 µm to 200 µm Impact beater mill with Turboplex classifier integrated in the upper section for precise particle size limitation Gksdpfx Afeqi Hhpetof Welded construction, grinding tools made of special steel The mill is available complete with accessories, such as: suction filter, rotary valves, cyclone, filter, fan, piping, control cabinet