Used Arunda Mills for sale (10,142)

Condition: used, Year of construction: 2000, functionality: limited functionality, overall weight: 3,000 kg, total length: 1,500 mm, total width: 700 mm, total height: 600 mm, input voltage: 380 V, type of input current: three-phase, year of last overhaul: 2010, Joint Strip Oto Mills (strip splicer), equipment suitable for splicing strips at the entry of the rollformer accumulator. Godpfx Afexmaa Ijtsuh

Condition: used, Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 Driven Sizing # 2 Pass N. 28 Driven Sizing # 3 NDT Prueftechnik Pass N. 29 Driven Sizing # 4 Pass N. 30 Driven Sizing # 5 STRAIGHTENING AND SQUARING SECTION Pass N. 31 Idle Turkshead #1 Roll holder plates NOT available Pass N. 32 Idle Turkshead #2 Roll holder plates NOT available Pass N. 33 Idle Turkshead #3 Roll holder plates NOT available Pass N. 34 Idle Turkshead #4 Roll holder plates NOT available Tables and tools for rolls change ABB Motors Gusdpfx Aeq Ul Rvjfteh Costamasnaga Reducers Centralized lubrication system Hydraulic Power Unit Complete Mill Portion Automation with diagrams (OTO MILLS/Elletre 2013) Complete hydralic system Fume and Vapors exhaust system with extraction hoods (EUROFILTER) Complete Zinc exhaust system (DONALDSON)

Year of construction: 2018, condition: refurbished (used), Flying cutoff unit TCC 120/168, made by OTO MILLS Recently revamped Complete flying cutoff unit including: - Accelerator (carriage transmission) - Main carriage motor - Cutoff unit TCC120 with base with linear guides, cutting head, clamping unit and support for tube at exit side - Control panel RENEWED - Electrical cabinet RENEWED Gsdpfovtpp Nox Aftouh - Hydraulic group - Cable chain - All existing documentation, manuals, drawings Specifications: - Type of saw : Friction - Material thickness : 1 –6 mm - Standard tube length : 3 –12 m - Diameter range : 42 –168 mm - Square tubes : 40x40 –130x130 - Rectangular tube : 50x30 –180x80 - Max. speed : 120 m/min - Length tolerance : +/-2 mm Round tube diameter: 42 – 168 mm Square tube diameter: 40×40 – 130×130 mm Rectangular tube diameter: 50×30 – 180×80 mm Material thickness: 1 – 6 mm Tube length: 3 – 12 m Type of saw: Friction Length tolerance: +/-2 mm Max. speed: 120 m/min

Condition: excellent (used), functionality: fully functional, sheet thickness steel (max.): 3 mm, sheet thickness (max.): 3 mm, outer diameter: 80 mm, HEAVY-DUTY HIGH-PERFORMANCE TUBE MILL OTO 80.3 QTC With complete Quick Tool Change System Made by OTO MILLS PRODUCTION RANGE • Diameter range 19mm – 80mm • Thickness 0.8mm to 3.2mm • Speed Max. 150 m/min • Working direction Left - Right Scope of supply: 1. Entry Line made OTO MILLS with: • Double Uncoiler OTOAD256 -PA • Double strip peeler for opening from top/bottom • Automatic strip joiner OTO GG254 • Floop vertical accumulator 2. OTO 80.3 QTC tube mill made OTO MILLS with: • Casted Iron stand • Bottom shaft height adjustable • Reinforced motor and gearboxes 2-speed transmission • Hydraulic nuts • Double length cooling tunnel • Motorised turk-head for fast adjustment 3. Quick change rafted system OTO QTC - 2nd set of cassettes off-line including : • 1 complete cassette for forming • 1 complete cassette for fin-pass • 1 complete cassette for sizing • Quick – plug automatic cardan connections Gjdpfx Afevr Tntotouh 4. 150 m/min Flying saw – High Speed cold saw OTO TCCG160 with : • Carriage motion with 70kW motor • Cutting head motion with hydraulic control • AC Rotation of the blade 5. Automatic packer MAIR SQ.HEX.90.D.5.SL with emulsion draining and bundle weighting system • Possibility to make hexagonal and square/rectangular bundles • 5 modules for production of tubes 4-10m (12m for thickness >1.8mm) • Including emulsion draining, and weighting unit • 3 chains for finished bundle storage • Test tube zone, with cutting saw for the test tube 6. Automatic strapping unit SIGNODE M400 7. Zinc spraying METALISATION 250 • 1 metallisation cabin • 1 zinc spraying unit METALLISATION ENERGIZER 250 • 1 Zinc spraying gun ARCSRPAY 528E 8. Fume exhaust system • Fume exhaust conducts and exhaust covers on the required points a • Filter for fumes 9. Complete set of rolls (*See details) NEW PARTS SUPPLIED IN 2023/2024: 10. Thermatool CFI 350-VF Solid state welder with : • Automatch • Selectable frequency 250-400kHz • Thermaview control panel 11. Cooler PARKER, Model hyprechill Maxi 12. Inner scarfing hydraulical Blissenbach, with all the toolding for ID 30-50m 13. OPTRONIC CNC control unit for driving flying saw (Switzerland) 14. New Emulsion plant with : • Pump and heat exchanger • Fillters • Electrical controls and monitoring 15. New motor and electritical cabinet for accumulator 16. New motor and control for sizing section

Year of construction: 2012, condition: refurbished (used), 6" TWIN TAC90 Double Cold Saw, made by OTO MILLS Year : 2012 / Revamping 2025 Tube range: - Rounds 48 – 170mm - Squares 50x50 – 150x150 - Rectangle 60x40 – 200x100 - Thickness range : 1.5 – 10,0 mm Speed : 90 m/min Scope of supply: - OTO MILLS TAC90 DF Twin Cold Saw - Electrical cabinet with ELTAV.5 CNC Positioning system - Operator control panel with HMI - Hydraulic group - First section of roller conveyor - Safety fences and protections Tube range: Rounds 48 – 170mm / Squares 50x50 – 150x150 / Rectangle 60x40 – 200x100 Thickness range: 1.5 – 10,0 mm Godpfx Aevtpnxsftjuh Speed: 90 m/min

Condition: used, Tube Mill OTO 89.6 QTC with Quick Change System Working range: · Diameter: 26.9 - 89 mm Gusdpov Dinmofx Aftjh · Thickness: 1.5 – 6.3 mm (except strip joiner up to 4,5mm and flying saw up to 5mm) · Length: 4 - 12 m Tube mill OTO 89.6 QTC | Year 2008 with : · Off-line strip preparation · Full automatic entry line (MTM) · OTO 89.6 Forming line (OTO MILLS) · OTO 89.6 QTC Quick change system (OTO MILLS) · 450 kW HF welder (EMMEDI) · Cold flying saw (SEUTHE) · Automatic 3" chamfering (MAIR) · Automatic packing (MAIR) · Automatic strapping (MAIR / SIGNODE) SUMMARY OF SCOPE OF SUPPLY 1. Automatic Entry Line with off-line strip preparation, including:  Double Uncoiler with off-line tale shear  Pinchroll and straigthener  Automatic strip joiner  Horizontal accumulator with rotating table 2. 89.6 Heavy-Duty tube mill with:  Cast steel stand structure.  18NiCrMo5 steel casehardened and ground shafts.  Independent Marking stand.  95 mm diameter shafts with cylindrical fit and drive key.  Upper shaft vertically adjustable (single point manual adjustment).  Hydraulic compensator in forming stands  4 Breakdown stands with 140kW AC Motor / 3 forming stands with 100kW AC Motor  4 Sizing stands with 140kW AC Motor 3. Quick change system OTO 89.6 QTC 4. 450kW HF welder 5. Double scarfing unit with bead chopper & scrap conveyor 6. SEUTHE TS90 cold flying saw 7. Automatic MAIR FINISHING & PACKAGING LINE with:  NDT Tube testing line  3" Tube chamfering MAIR TFA.3/12.5  Automatic packer MAIR  Automatic Signode strapping unit Tube diameter: 26.9 - 89 mm Tube square: 30x30 - 70x70 Tube rectangular: 40x20 - 100x40 Tube thickness: 1.5 – 6.3 mm (except strip joiner up to 4,5mm and flying saw up to 5mm) Tube length: 4 - 12 m Working direction: Right to Left Speed: 120 m/min Entry line: MTM Tube Mill: OTO MILLS 89.6 QTC Flying saw: SEUTHE TS90 HF Welder: EMMEDI TFU450 Packing unit: MAIR .6.D.F & SIGNODE M400TSM

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Drive power 55 kw Grinding disk diameter 500 mm Godexgtgzspfx Afteuh Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, machine/vehicle number: 13386, Rotor diameter: 800 mm Rotor width: 1200 mm Rotor knives: 7 Stator knives: 3 rows Infeed cross-section approx. 1200 x 800 mm Godpfexgi Syjx Aftouh Drive motor: 132 kW

Condition: as good as new (ex-display), Shell end mills Gujdpfxsdwbkwj Afteh for hard metal cast Diameter 79 mm and length 61 mm Diameter 98 mm and length 70 mm Weight 4 kg

Condition: used, Lot of end mills for CNC machines. Gedpfx Asxfithefteuh

Condition: used, CNC drilling and milling machine (Heavycut 4.2) Max. working area ..... x ..... 11,000 mm ..... y ..... 4,500 mm ..... z ..... 2,500 mm ..... W ..... 1,200 mm Table size (rotary) ..... 2,500 x 3,000 mm Plate field ..... 5,000 x 7,000 mm .....5,000 x 35,000 mm Max. table load ..... 40 t Gusdsxlafhjpfx Aftsh

Condition: used, total height: 2,550 mm, total length: 4,800 mm, total width: 2,740 mm, Empty weight: 7.000 kg Price: On request - Documentation available: No - Spindle speed max.: 1000rpm - Model: terbank - Digital readout: Yes - Table width: 970mm - Table length: 1140mm - Drilling capacity: 1mm - Travel X: 1500mm - Travel Y: 1500mm - Spindle diameter: 80mm Gujdpsxazypofx Aftjh - Travel Z: 1100mm - Type digital: Heidenhein - Number of axes: 3 - Spindle speed min.: 12rpm - Transport dimensions: 4800mm x 2740mm x 2550mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), • Original Bilz ThermoGrip holders – Made in Germany • SK40 taper, type T0600/AD40 and T0800/AD40 • Balancing G6.3 / 15,000 rpm – suitable for high-speed operations • Set includes solid carbide VHM end mills of various diameters • Ideal for precision machining and applications requiring high stability • Very good condition, ready for operation Top-tier equipment – robust construction, German quality, secure clamping. Gsdpfoxau Erex Aftouh

Condition: used, Rotor diameter: 800 mm Rotor width: 1200 mm Rotor knives: 7 Gsdpjxgi Stjfx Afteuh Stator knives: 3 rows Infeed opening approx. 940 x 1154 mm Drive motor: kW

Condition: as good as new (ex-display), Shell end mills Make Strasmann 150 x 95 NR HSS CO 10 Spir. 800 mm Gjdpfodwblbox Aftjuh 545214

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, Manufacturer: Dörries Scharman Machine: Used CNC Horizontal Boring Mill Type: Floor Type Model: Heavycut 4.1 Year of Manufacture: 1981 Control: Siemens Condition: Used Total Machine Weight: 219 tons TECHNICAL DETAILS CNC Boring and Milling Machine (Heavycut 4.1) Max. Working Range: - X-axis: 14,000 mm - Y-axis: 6,000 mm - Z-axis: 2,500 mm - W-axis (Feed Travel): 1,300 mm Rotary Table Size: 2,500 x 3,000 mm Plate Field: 7,200 x 4,000 mm / 7,200 x 8,000 mm Max. Table Load: 60 tons Feed Travel W-axis: 1,300 mm B-axis: Rotary Table Max. Spindle Speed: 1,500 rpm Spindle Diameter: 200 mm Table Load: 60 tons Table Length: 3,000 mm Table Width: 2,500 mm Control System: Siemens Plate Field: 7,200 x 4,000 / 7,200 x 8,000 mm Number of Axes: 6 (X, Y, Z, V, W, B) Spindle Diameter: 200 mm Spindle Quill Dimensions: 500 x 500 mm Spindle Speed Range: 0.8 – 1,500 rpm Rotary Table Axis: B Axis Max. Table Load: 60 tons Hydraulic Oil: HL-46 Lubrication Oil: LAN 68 Gedpsxladqjfx Aftouh

Condition: used, total height: 2,450 mm, total length: 4,000 mm, total width: 2,000 mm, Empty weight: 6.300 kg Price: On request - Documentation available: No - Control: Conventional - Motor power: 7.0kW - Drilling depth: 600mm - Spindle speed max.: 1000rpm - Model: terbank - Digital readout: Yes - Tool holder: ISO 40 - Table width: 800mm - Table length: 1000mm - Travel X: 800mm - Travel Y: 800mm - Spindle diameter: 75mm - Travel Z: 100mm - Type digital: Sony Guodpfxowr Drhe Aftoh - Number of axes: 3 - Spindle speed min.: 13rpm - Transport dimensions: 4000mm x 2000mm x 2450mm (l x w x h) - Transport weight [kg]: 6300kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), For sale: Professional clamping chuck from the renowned brand HOLEX – a robust and reliable solution for CNC machining centers. • Type: SK40-2/20-100 • Clamping system: ER32 (interchangeable collets) • Length: 100 mm • Maximum torque: 170 Nm • Spindle speed: up to 12,000 rpm Guodpfx Afow S Iw Heteh • High-quality construction – precise clamping of shank tools • Condition: used, in very good technical condition Ideal for securing drills, milling cutters, taps, and other shank tools. The HOLEX brand is a line from the German Hoffmann Group, ensuring quality and durability at a reasonable price.

Condition: used, machine/vehicle number: 13260, Rotor diameter: 600 mm Rotor width: 1000 mm Gjdoxgi Smepfx Aftouh Rotor blades: 5 Stator blades: 2 rows Infeed opening approx. 720 x 980 mm Drive motor: 75 kW

Condition: excellent (used), End mills Make Sandvik Gjdpfsdwbkiex Aftouh Coro mill 316

Condition: used, Price: On request Drilling machine, horizontal boring machine  Model: Conventional Manufacturer: WMW Union Type: BFT 90/3-2 Including rotating table Including digital readout Including multiple belongings X-Z travel: 1600x1000 Y-travel (up-down): 1050mm W-travel: 710mm Spindlemotor: 11kW Spindle diameter: 90mm Spindlespeed: 8-1600 rpm Table: 1000x1120mm Gujdpfx Afewnhi Aotjh Machine-weight: 9000kg - Documentation available: No - Serial number: 90/3-2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, machine/vehicle number: 13334, Rotor diameter: 600 mm Rotor width: 650 mm Guodpfx Afjxgi Sgjtoh Rotor knives: 8 Stator knives: 3 rows Infeed cross-section approx. 650 x 600 mm Drive motor: 75 kW

Condition: excellent (used), 16 end mills with indexable inserts Gusdedx D Tvjpfx Aftjh Make Walter Weight 9.5 kg

Condition: used, machine/vehicle number: 12979, Rotor diameter: 300 mm Rotor width: 200 mm Rotor knives: 3 Gsdexgi Sajpfx Afteuh Stator knives: 3 Infeed opening approx. 220x320 mm Drive motor: 5.5 kW

Condition: used, machine/vehicle number: 11796, Rotor diameter: 250 mm Rotor width: Rotor blade: 3 Stator knife: 4 Godewbwunepfx Aftouh Inlet cross-section approx. 250 x140 Drive motor: 5.5 kW