Used Arunda Mills for sale (9,980)

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Fgsdpfxowcfgbs Agcsk Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Fgsdpfx Agsxaqa Socjk Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 19,000 h, Munch Pellet Mill with 2 only 200 hp motors (total 400 hp) electric controls and 60 hp centrifugal cooling fan also second 2011 model 650 pellet mill and 2 skids of new rolls and dies and spare parts. Second mill 2011 has no motors. It is working machine ready for use in case 2012 machine had problem. Fsdpfxexc Nt Nj Agcsgk

Condition: used, Year of construction: 1988, x-travel 870 mm y-travel 370 mm z-travel 400 mm Fjdpfx Asxlkw Ujgcjgk table-size 310 x 1370 mm distance vertical spindle / table 50 - 450 mm feed - longitudinal/cross 20 - 800 mm/min 9 - 355 mm/min rapid traverse longitudinal and cross 3000 / 1375 mm/min spindle taper SK 50 spindle turning speed range 40 - 1750 U/min spindle speed: 12 Stück total power requirement 5,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,9 x 2,0 x 1,5 m - Powerful CNC universal milling machine - Includes Fanuc control system - Kneading milling head - Automatic feeds on X/Z/Y axes - Central lubrication system - Coolant system - Pivoting machine light - Splash guard tray - Separate transformer

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: Fsdedkx Anopfx Agcogk - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle adaptor MK 3 - right - left rotation - Drilling spindle stroke 150 mm - drilling spindle speed infinitely variable 80 - 1170 rpm - 2 feeds 0,1 / 0,2 mm/rev - throat 290 mm - max distance table - drilling spindle 780 mm - table with 2 T-slots 480 x 400 mm - Height adjustable via toothed rack with hand crank - Drive 400 V / 0,9 / 1,3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - coolant device - quick-action drill chuck 1-13 - illumination

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Two machines in one, made by the best Swiss CNC manufacturer. 1. Log milling 2.Timber Framing. This machine produced machined log structures for 6 years, (dormant since), of high precision and quality, for very discerning buyers. For progressive builders who want to automate milled log structures up to 8" x 12" material, or use strictly for timber framing. Best suited for USA or Canada customer, for easy truck transport. Delivery, set-up, calibration, operational training arranged at cost. Self-contained Compact design, only 10 feet deep, 8 feet wide. All processes are performed inside the enclosure. Cut-offs fall into and are removed from a central pit. Mill shavings are extracted by air suction, leaving work area remarkably clean. So quiet, you can have a conversation beside the working machine. Fodpfjwvwl Asx Agcjgk

Condition: used, Motor output 3 kW Fsdpfxov Nq Sko Agcsgk total power requirement 3 kw Weight 1.400 kg

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Fgedpsruakgjfx Agcek Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm Fsdpfxsv Nw Npo Agcsgk quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, Control Unit Brand SIEMENS Fedpex D Nd Defx Agcogk Model 840 D Main Drive Tool taper IMS 76 Number of axis 3 This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 1997, CNC travelling Column machine Table 10,000mm Length x 1100mm Width X Travel 8500mm Y Travel 1600mm Z (Ram Trave) 1200mm Fgjdpfx Ajx El E Aogcok 60 Station toolchanger Integrated horizontal & Vertical rotary table (CNC) Spindle BT50 Spindle 20 - 2000RPM Siemens Sinumerik CNC Control

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, spindle speed 4,500rpm , 16 station turret, 15kW spindle motor, milling 6000rpm, Fodpjx Elr Ajfx Agcogk C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck,low volt light

Condition: used, Used PET Bottle Recycling Line. Approximately 2,000 kg/hour (4,400 lbs/hour) input, producing about 1,700–2,000 kg/hour (3,750–4,400 lbs/hour) of clean PET flakes depending on feedstock quality and operating conditions. The line was built in 2011-2012. Originally designed for processing post-consumer PET bottles into clean PET flakes. Includes bale breaking, bottle sorting, size reduction, hot and cold washing, polymer separation, flake sorting, and bagging. Fgodsw U A Ixopfx Agcjk Main Equipment Includes: Infeed conveyor Bale breaker Metering screw conveyors Star screen classifier Vibrating chute (2) Sesotec optical bottle sorters (4) Collecting conveyors Cutting mill (Model KSM 800-1530) Friction washers Hot washers with recirculation systems Sink-float separation stage Post washer and recirculation system (2) Double-stage air separators Sesotec optical flake sorter (9) Filling stations Electrical control system Steel structures and piping More information is available on request.

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° total power requirement 4 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Milling length 1750 mm Milling width 260 mm Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm Bcfed2Md7M Milling head swivels on both sides for helical gearing 30 ° Machine weight approx. 4 t Space requirement approx. 4 x 1.85 x 1.85 m Equipment/accessories - 7 vices - change wheels Fgodpfx Aowhquuogcsk - Clamping devices - documentation

Year of construction: 2015, operating hours: 48,086 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D Main Drive Fgodpfxsx D Ndwj Agcsk Number of spindles 2 Tool taper IMS 76 Number of axis 3 Tail Stock Pinol tool taper VID 30 Tools Number of station 2x16 This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2013, swing over cross-slide 360mm, Maximum cutting diameter 366mm, Maximum cutting length 705mm, Bar capacity 80mm, Spindle speed 4,000rpm, milling speed 10,000rpm, Main spindle power 18.5Kw, Fgjdpfx Agex Eitujcjk C axis 0.001 degrees, Y axis -/+ 50mm, 12 station turret. Mori Control M730BM, equipped with Toolsetter, swarf conveyor, 3 jaw chuck, Parts catcher, barfeed unit

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Fjdpfx Agsx Db Iuscjgk Weight: Estimated: Lbs250.0 Dimensions: 700 X 1450

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,083 h, General Data Machine weight 9500kg Control Unit Brand FANUC Main Drive Spindle speed range 10000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 570 mm Z-Axis Movement 570 mm Fsdpfox D Dzqsx Agcjgk This 3-axis DOOSAN VC-510 was manufactured in 2013. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. The machine includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC-510 vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 3 Fedpfx Agsx D H T Aocjgk Spindle Speed 12000 RPM Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A robust twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Additional attributes include a 1-degree indexing table and a chip conveyor. If you are looking to get high-quality machining capabilities consider the MORI SEIKI SH400 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, operating hours: 39,293 h, Movement X-Axis Movement 711 mm Y-Axis Movement 406 mm Z-Axis Movement 394 mm This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information. Fedpex D Dzwjfx Agcogk Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,446 h, Control Unit Brand FANUC Fgsdpfx Aox D Dz Djgcok Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2012, operating hours: 37,513 h, General Data Fgedpfox D Dz Rex Agcek Machine weight 9500 kg Main Drive Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm Tools Number of index 40 This 3-axis DOOSAN VC 510 was manufactured in 2012. It features a twin pallet vertical machining centre with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2023, This 5-axis DMG MORI DMP-70 was manufactured in 2023, featuring a Siemens 840D sl control and a BBT30 direct-drive spindle with a maximum speed of 24,000 rpm. It includes a 25-tool ATC and coolant through spindle at 40 bar. Ideal for high-speed, 5-axis machining with its integrated swivel rotary table. If you are looking to get high quality machining capabilities consider the DMG MORI DMP-70 machine we have for sale. Contact us for more information about this machine. Application Types Fgedex D H Hiopfx Agcjk Milling

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 4 Spindle Speed 12000 RPM Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Noteworthy are the through-spindle coolant and chip conveyor. Ideal for automated 4-axis machining, though it requires a new X-axis drive and is currently non-operational. Consider the opportunity to buy this MORI SEIKI SH400 horizontal machining center. Contact us for more information about this machine. Fgedpfx Aox D H Uajgcek Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, operating hours: 20,695 h, Control Unit Brand MAZATROL Model Matrix Movement X-Axis Movement 630 Y-Axis Movement 230 Z-Axis Movement 1585 W-Axis Movement 1546 Fsdox D Szrspfx Agcjgk Additional Equipment Options Screen: Picture available This 5-axis Mazak Integrex 400 IV was manufactured in 2006. It features a Mazatrol Matrix control, a 12-inch chuck, and a steady rest supporting 70-230mm. The machine offers a milling spindle speed of 12000rpm and a turning spindle speed of 2800rpm. If you are looking to get high-quality turn-mill capabilities, consider the Mazak Integrex 400 IV machine we have for sale. Contact us for more information about this machine. Application Types Turning