CNC turning and milling center
MAZAK Integrex 200 2S

Name: MAZAK Integrex 200 2S
Brand: MAZAK
Availability: InStock

Year of construction

2004

Condition

Used

Location

Germany

CNC turning and milling center MAZAK Integrex 200 2S

Basic data

Machine type:: CNC turning and milling center

Manufacturer:: MAZAK

Model:: Integrex 200 2S

Year of construction:: 2004

Condition:: good (used)

Price & Location

Location:: Deutschland

Call

Details about the offer

Listing ID:: A23286120

Update:: 05.11.2026

Description

CNC turning/milling center
Manufacturer: MAZAK
Machine model: Integrex 200 2S
Control: Mazatrol 640 MT pro
Year of manufacture: 2004

TECHNICAL DATA
Swing diameter, max. (mm) 660
Turning diameter, max. (mm) 660
Max. turning diameter over slide (mm) 500 - 660
Bar machining up to Ø (mm) 64
Workpiece weight
- Chuck workpiece (kg) 100
- Shaft workpiece (kg) 150
Travel distances
- X-axis (mm) 580
- Z-axis (mm) 1,045
- Y-axis (mm) ± 80
- W-axis (mm) 1,050
- B-axis (degrees) -30 to +195
Rapid traverse rate (m/min)
- X-axis (m/min) 38
- Y-axis (m/min) 26
- Z-axis (m/min) 38
- W-axis (m/min) 30
- C-axis (rpm) 400
Feed rate range
- X / Z / Y-axis (mm/min) 0 – 8,000
Main spindle integrated spindle motor
- Speed range (stepless) (rpm) 35 – 5,000
- Drive power (kW) 22
- Torque max. (Nm) 349
- Spindle nose A2 - 6 inches
- Indexing (degrees) 0.0001
Second spindle
- Speed range (rpm) 35 – 5,000
- Drive power (kW) 18.5
- Torque max. (Nm) 326
- Indexing (degrees) 0.0001
Driven tools
- Speed range (rpm) 15 – 12,000
- Drive power (kW) 15
Bwodpfx Ane Ahynkepew
- Torque max. (Nm) 120
- Tool holder Capto C6
Tool magazine
- Number of tool positions 40
- Tool weight max. (kg) 10
- Tool diameter max. (mm) 90
- with free secondary positions max. (mm) 125
- Tool length max. (mm) 300
- Tool change time (sec.) approx. 1.3 sec

Connected load 62 kVA
Operating voltage 400 V / 50 Hz

EQUIPMENT FEATURES
+ Coolant tank capacity 220 liters
+ Chip conveyor, hinged belt design, discharge to the side
+ Automation alphaMAX
++ Industrial robot designation Motoman NX 100
++ Number of axes 6
++ Load capacity 20 kg
++ Positional repeatability ± 0.06 mm

DIMENSIONS and WEIGHTS
Machine weight (kg) approx. 10,200
Machine footprint (mm) 3,820 x 2,060

Subject to changes and errors in technical data and specifications.

The listing was translated automatically. Translation errors are possible.

Seller

Last online: Yesterday

Registered since: 2017

9 listings online

Call

Send inquiry

Telephone & Fax

+49 6123 ... show

Fax:

These listings may also fit your interest.

Listing

CNC turning and milling center CMZ TD 35Y / 1350

Haut-Mauco

7,629 km

CNC turning and milling center
CMZTD 35Y / 1350

Call

Condition: excellent (used), Year of construction: 2022, operating hours: 1,400 h, functionality: fully functional, turning length: 1,350 mm, turning diameter: 550 mm, spindle motor power: 48 W, spindle speed (max.): 3,000 rpm, spindle bore: 95 mm, travel distance X-axis: 380 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 1,350 mm, spindle nose: A2-11, 12-tool turret Spindle speed: 12,000 rpm Tool presetter arm Chip conveyor High-pressure pump: 15 bar Autoblok SLU3.1 steady rest Bwedpfx Anozzb Amspsw Chuck: Ø315 Bar feeder interface Tool holder set

See details

Listing

San Giovanni In Marignano

8,493 km

Used machining center
HURCOVM 10 i

Call

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. The machine is in good working condition and ready for immediate integration into production. Bsdpszcpu Ijfx Anpeww Available for inspection and testing at our facility. The machine is complete with: * Auger-type chip conveyor with side discharge * High-pressure pump * Digital manuals * CE declaration of conformity

See details

Listing

Universal machining center Hermle C 32 U

Germany

7,781 km

Universal machining center
HermleC 32 U

Call

Condition: good (used), Year of construction: 2022, functionality: fully functional, Hermle C 32 U with HS flex handling system, Year of manufacture 2022, Heidenhain iTNC 640 control system, Travel range X/Y/Z 650/650/500 mm, Dynamic Efficiency, Monitoring software, Spindle speed up to 25,000 rpm, HSK - A63 tool interface, 36-position tool changer, Additional magazine with 88 positions, Bjdpfe Aggfmjx Anpeww 2-axis swiveling rotary table 650 HS flex, Torque drive for the C-axis, Spur gear tandem drive for the A-axis, HS flex handling system, HS flex additional magazine, HACS pallet and order management system, Chip conveyor, Emulsion extraction system, IKZ 80 bar, Combination protective screens, Electric handwheel, Heidenhain 3D measuring probe.

See details

Listing

CNC turning and milling center GILDEMEISTER CTX 510 ECOLINE

Aach

7,993 km

CNC turning and milling center
GILDEMEISTERCTX 510 ECOLINE

Call

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, Controlled by Siemens Year of manufacture: 2011 Travel in X: 300 mm Travel in Z: 1050 mm Spindle bore: 103 mm Speed range: 20 – 3250 rpm Including the following accessories: Sliding guard 12-position turret with 6 driven tool stations Tool measurement in the working area Bsdszd Dczspfx Anpjww 3-jaw chuck, hydraulic, SMW Autoblock 0, 315 mm Foot switch for chuck, foot switch for tailstock Various tool holders VDI 40 Various sets of top jaws Various turning tools Signal lamp, 4-color Tailstock with quill Chip conveyor with coolant tank 4 machine feet Operating manuals

See details

Listing

CNC turning and milling center DOOSAN PUMA MX 2600 ST

Root

8,011 km

CNC turning and milling center
DOOSANPUMA MX 2600 ST

Call

Listing

Vertical machining center MAZAK VCS 430AL

Contamine-sur-Arve

7,946 km

Vertical machining center
MAZAKVCS 430AL

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : ISO40 - Spindle power : 18,5 [kW] - Spindle speeds : 12.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560 x 430 x 510 [mm] - Rapid traverses rates (X/Y/Z) : 42 sur le X et 36 en Y/Z [m/min] Bwsdpfx Aneuhbu Iepjw TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 TABLE - Table dimensions : 900 x 430 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2062 x 2080 [mm] - Machine height : 2780 [mm] - Machine weight : 4800 [kg] MACHINE HOURS - Number of spindle hours : 3351 [h] EQUIPMENT - CNC : SMART - Interface : PCMCIA / RS232 - Interactive programming : Mazatrol - Electronic handwheel - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor - Workpiece probe

See details

Listing

Vejle

7,536 km

Milling machine
HERMLEC40U Dynamic

Call

Condition: excellent (used), Year of construction: 2006, operating hours: 15,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 28,000 rpm, rotational speed (max.): 28,000 rpm, Heidenhain 530 control system. 28,000 RPM spindle. Bwjdpj Afzgpsfx Anpsw HSK63 A tool interface. 80 bar coolant pressure. Chip conveyor. Blum tool measuring system. Renishaw probe. Numerous accessories, holders, and vices, and much more. New spindle to be installed in summer 2024.

See details

Listing

Multi-tasking MAZAK INTEGREX 400-III S Mazak Integrex 400 III-S

Babberich

7,577 km

Multi-tasking MAZAK INTEGREX 400-III S
MazakIntegrex 400 III-S

Call

Condition: good (used), Year of construction: 2005, operating hours: 4,630 h, turning length: 1,585 mm, spindle motor power: 30,000 W, spindle speed (max.): 3,300 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,585 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 2,700 mm, overall weight: 14,500 kg, Multi-tasking lathe MAZAK - INTEGREX 400 III-S MACH-ID 9809 Make: MAZAK Type: INTEGREX 400 III-S Control: MAZATROL 640 MT PRO Year: 2005 Only 4630 Cutting hours Automatic door 40 CAPTCO C6-Tool magazin Robot interface 5 Axis simulteneous package Sub spindel with C-Axis and 0,0001 Degree Internal Grundfos 15 Bar coolant Chip conveyor Optional tooling package with 40 holders Max. turning Ø: 850mm X-Axis: 630mm Y-Axis: -115 to + 115mm Z-Axis: 1585mm B Axis: -30 to +195° Spindle bore: 102mm Speedrange: 3300Rpm Spindle power: 30kW Subspindle speeds:3300Rpm Bwedpfxjz Ata Ho Anpsw Subspindle bore: 102mm Subspindle power: 26kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm B-Axis power: 19kW Chip conveyor: Yes Tool eye: Yes Hours: 4630H Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

CNC turning and milling center Mazak Integrex 300 - III

Germany

7,781 km

CNC turning and milling center
MazakIntegrex 300 - III

Call

Condition: good (used), Year of construction: 2005, Mazak Integrex 300 - III turning/milling center, year of manufacture 2005, CNC control 640 MT, travel X/Y/Z 630/230/1,585 mm, B axis NC swiveling head -30°/+195°, tool magazine with 80 positions Capto, main spindle 26 kW, C axis 0.001°, tailstock MK 5, high-pressure coolant system 70 bar with filtration unit, Tooleye, Bedpfsyzfr Isx Anpeww 5-axis simultaneous machining package, Mazak Monitoring System, chip conveyor,

See details

Listing

CNC turning and milling center Mazak Integrex i400 x 1000U

Zevenbergen

7,503 km

CNC turning and milling center
MazakIntegrex i400 x 1000U

Call

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 1,011 mm, turning diameter: 658 mm, spindle bore: 102 mm, travel distance X-axis: 615 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,077 mm, rotational speed (max.): 3,300 rpm, rotational speed (min.): 50 rpm, bar passage: 102 mm, total height: 2,720 mm, total length: 6,585 mm, total width: 2,800 mm, overall weight: 13,400 kg, We are pleased to offer this Mazak Integrex i-400 x 1000 multitasking CNC machine, manufactured in 2011 and equipped with Mazatrol Matrix control. A versatile machine combining turning and milling operations in a single setup, ideal for precision machining and complex (bigger) components. Technical specifications: Turning diameter: 658 mm Max. turning length: 1011 mm Bar capacity: 102 mm Bwodez Rt Dtopfx Anpew Travel on X-axis: 615 mm Travel on Y-axis: 250 mm Travel on Z-axis: 1.077 mm B-axis travel: -120/+120° Main and spindle: 50 - 3300 1/min. B-axis index increments: 0,0001° C-axis indexing of spindle: 0.0001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 36 tool positions NC Tailstock: MK5 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

See details

Advertise here