Used Plum for sale (178)

Condition: ready for operation (used), functionality: fully functional, total height: 1,200 mm, total width: 580 mm, total length: 820 mm, input voltage: 230 V, The machine is designed for pitting plums, leaving the plums whole. Electrical connection: 230 V. Machine dimensions mm: 820 x 580 x h1200. Originally, the machine is equipped with 10 blades, but 2 blades were already lost when it was purchased, but this does not interfere with the operation process at all. Only the yield is slightly lower. Productivity with 8 blades: 100 fruits / 1 minute Fsdpfxsw H I Tre Agrepb Hole diameter: 30 mm. Machine weight: 100 kg.

Year of construction: 2015, condition: excellent (used), Reportedly very little used Plümat model BFL 851 automatic machine to fill and close flexible pre-sterilized IV-Bags under pharmaceutical conditions. Made in 2015, the line consists of frame with safety guard, manual bag feeding, printing station, automatic bag infeed, tube cutting station, filling station, tube welding station, tube cooling station, bag outfeed, control cabinet. The filler is a linear single lane system. The system is in compliance with GMP and FDA standards. - processable bag formats (2 tubes = free tube length 30 mm presealed with Vial stopper & 40 mm sealed by welding or open tube): 100 ml, 250 ml and 500 ml - capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - filling accuracy: 100 ml = ± 2.0 %, 250 ml = ±  1.0 % and 500 ml = ±  0.7 % - dosage range: 100 ml - 1000 ml - welding method used: heat contact welding - filling system: SIEMENS S7 including counter card with mass-flow measuring system and pneumatic filling valves - controller: SIEMENS S7 Microbox with Profibus DP and TP 1500 touch terminal - power supply: 5.5 kW, 230/380 V, 50 Hz - compressed air supply: approximately 700 l/min, min 6 - max 8 bar - cooling water supply: approximately 4 l/min, temperature 18-21°C Fedpjlhqndefx Agropb - weight: approximately 1350 kg (net) and 1750 kg (gross) - dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm

Condition: good (used), Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units Fpodpfofk Ad Sox Agrsb -FAG: Plummer block housing type SNV 140 -Price: per piece -Number: 4 pieces -Dimensions: 315/140/H185 mm -Weight: 9.4 kg/piece

Condition: good (used), Plummer Block Housings, Plummer Block Housings, Bearing Block Plummer Block Housing, Plummer Block Housing Unit, Plummer Block Housing Units, SKF Plummer Block Housing, Plummer Block Unit -Manufacturer: FAG, plummer block housing type TVN 312 -Bore diameter: 70 mm -Number: 4x bearing housings available -Price: per piece Fpsdpfx Aov Ulaaogreb -Dimensions: 295/120/H163 mm -Weight: 10.8 kg/piece

Condition: good (used), Plummer Block Housings, Plummer Block Housings, Bearing Block Plummer Block Housing, Plummer Block Housing Unit, Plummer Block Housing Units, SKF Plummer Block Housing, Plummer Block Unit -Manufacturer: SKF, plummer block housing type SN 212 -Bore diameter: 72 mm -Quantity: 1x bearing housing available -Dimensions: 255/105/H135 mm -Weight: 4.2 kg Fedpsv Ulf Nsfx Agrjpb

Condition: good (used), Plummer Block Housings, Plummer Block Housings, Bearing Block Plummer Block Housing, Plummer Block Housing Unit, Plummer Block Housing Units, SKF Plummer Block Housing, Plummer Block Unit Fjdpfxjv Uld So Agrspb -Manufacturer: FAG, plummer block housing type SN511 -Bore diameter: 50 mm -Number: 2x bearing housings available -Price: per piece -Dimensions: 255/95/H135 mm -Weight: 4.6 kg/piece

Condition: used, Plummer block housings, plummer block housings, pillow block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -Manufacturer: SKF -Type: bearing block SNL 213 -bearing to be installed: abbreviation -Number: 12x plummer block housings available -Price: per piece -Dimensions: 275/110/H150 mm/piece -Weight: 6.2 kg/piece Fpsdpfx Aedl Il Aogrob

Condition: used, Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -SKF: Plummer block housing type SNH 509 -Inside diameter: 57 mm -Price: per piece -Number: 2 pieces -Dimensions: 204/86/H110 mm Fodpfx Agjfk Afceropb -Weight: 2.9 kg/piece

Condition: used, Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -SKF: Plummer block housing type SNA 516-613 -Price: per piece Fsdsfk Afijpfx Agrspb -Number: 2 pieces -Dimensions: 315/120/H170 mm -Weight: 9 kg/piece

Condition: good (used), Plummer Block Housings, Plummer Block Housings, Bearing Block Plummer Block Housing, Plummer Block Housing Unit, Plummer Block Housing Units, SKF Plummer Block Housing, Plummer Block Unit -Manufacturer: SKF, plummer block housing type SNH 513-611 -Bore diameter: 77 mm -Quantity: 1x bearing housing available -Dimensions: 275/110/H150 mm -Weight: 6.6 kg Fsdpfx Aev Ulhkjgrjpb

Condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, Fpodshv S Ezopfx Agrjb -Manufacturer: MW Markisches Werk, hydraulic unit with container -Type: 1324 -Shaft: 12 x 8 mm, see photo techn. drawing -Individual components: see photos -Dimensions: 280/270/H450 mm -Total weight: 9.8 kg

Condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit: with hydraulic tank -Unit: unfortunately without type designation -Hydraulic tank: Tank capacity approx. 7 l, with return pressure indicator Fjdpshvfy Uefx Agropb -Pressure: bars -Flow rate: l/min -Individual components: see photos -Dimensions: 350/240/H570 mm -Total weight: 15.1 kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump -Hydraulic unit comes from a Jungheinrich electric forklift -2x drives -Filter Control valve -Hydraulic tank: 930/400 / H360 mm -Dimensions: 1000/400 / H800 mm -Weight: 288 kg Fpsdeb Uht Aspfx Agrob

Condition: used, grinding wheel weight max. 20 kg Fjdpfxow T Tvwo Agrepb grinding wheel diameter 320 mm grinding wheel width max. 140 mm range L-W-H 0,41 x 0,27 x 0,36 m weight 4,9 / 9,7 kg balancing scales Hofmann NG-1, Test pin length 178 mm, spigot 15 mm diameter. Machine dealer with own stock of 1600 m² and certification of the database "Machineseeker".

Condition: excellent (used), Plummer block housings, bearing blocks -Condition: unused -Quantity: 4 pieces bearing block with bearing -Type bearing block: NTN 320 - Bearing type: UC320 -with shaft seal -Bearing: Ø 100 mm Fpedpfxeb A H Rzs Agrsb -Number: 4x available in storage -Price: per piece -Package dimensions: 550/340/H240 mm -Weight: 43 kg

Condition: excellent (used), functionality: fully functional, Cherry and plum pitting machine Model: MPB for easy pitting Fodpsiduifofx Agropb Processing capacity approx. 35-190kg/h depending on fruit and size Tabletop device with hand wheel without circuit breaker DGUV V3 tested Connection 400V, 500Watt, 16A-CEE plug Dimensions: 465 x 410 x 480 mm, WxDxH Used machine cleaned and checked with 3 months warranty Option: cherry plate cherry stoner Visit our large bakery machine exhibition

Condition: used, This listing is for a single Pall (Now part of Cytiva) CSUH 040 Feed Retentate The unit is in full working condition and is ready for immediate use Designed for optimum performance and product recovery, Centramate™ TFF cassette holders, part of the Pall filtration portfolio, are available in a variety of sizes to meet your application requirements. These holders support efficient concentration, purification, and buffer exchange of biomolecules, making them ideal for small batch production, process development, and Phase I clinical studies. Identical fluid path lengths ensure precise linear scale-up to larger process systems. Tool-free cassette removal simplifies workflows—no need to disassemble system plumbing. Available in: 316L Stainless Steel (Centramate system) for robust, high-performance applications. Fpjdpoxv Dlyefx Agreb Ultra-High Molecular Weight Polyethylene (PE) (Centramate PE system) for a more economical yet durable alternative. A variety of membrane types and screen options are available for system versatility and application-specific performance.

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm passage width 1500 mm control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min rapid motion Y-axis 30000 m/min rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements • Documentation Accessories: Fpedpfjx S Rx Iox Agrob 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Various spare parts

Condition: good (used), Plummer block housings, plummer block housings, plummer block bearing blocks, plummer block housing units, plummer block housing units, vertical plain bearings, plummer block bearings, tension bearing units, tension head -Manufacturer: PTI, Tension bearing unit type T205 -Balance: HC205-GE25KRRB -Bore diameter: 25 mm -Number: 31x clamping bearing units available -Price: per piece -Dimensions: 250/130/H35 mm Fedpfx Ajx I D S Tegropb -Weight: 1.8 kg

Condition: good (used), Year of construction: 2014, x-travel 730 mm y-travel 730 mm z-travel 880 mm size of pallet 2 x: 500 x 500 mm spindle speed: 12000 tool taper SK 40 distance spindle center to table 80 - 810 mm milling spindle drive 30 kW max. torque max. 102 Nm max. workpiece weight 500 kg max. workpiece diameter on pallets 800 mm max. workpiece height H = 1100 mm change time of pallets 9,5 sec Max. speed ot the feeder 60000 mm/min rapid traverse 60 m/min tool changer number of tools 40 max. tool diameter 110 mm max. tool-dia with free toolbox 320 mm max. tool weight 30 kg change-time chip to chip 4,4 - 10 sec change-time tool to tool 1,95 sec Number of working hours 15894 h total power requirement 46 KVA weight of the machine ca. 15 t required space 5,5 x 3 x 2,8 m Well-preserved horizontal machining center DMG-Mori, Mod. NHX 5000, built in 2014 with Siemens 840D CNC control with two pallets and 40-way tool changer. Read operating hours 23262, spindle hours 15894 Other data: Fpsdpfx Aov Htitjgrjb Distance spindle nose - table center 70 - 950 mm Pallet indexing time 1.3 sec Indexing of the B axis (table) 360 x 1 degree Jog feed rate 0 - 5000 mm/min Machine dealer with own stock of 1600 m².

Condition: good (used), Pipe vise, pipe stand, pipe vise, plumber's vise, pioneer -Max. clamping range: Ø 75 mm -with: storage -Number: 1x Pioneers available Price: per piece -Dimensions: 1300/900/H160 mm Fsdpfx Ajb A N E Hogrspb -Weight: 20 kg

Condition: ready for operation (used), Year of construction: 2005, x-travel 400 mm y-travel 450 mm z-travel 350 mm Control Heidenhein iTNC 530 68 fach tool adaptor HSK 40E turning speeds 30.000 U/min fixed table - dimensions 300 x 400 mm mm Fodpfx Agjxfb E Ajrepb workpiece weight 200 kg pallet table size 320 x 320 mm feed speeds autom. x/y/z 40 m/min. spindle drive motor 13 kW Number of working hours 32369 h total power requirement 16 kW weight of the machine ca. 7.500 kg High-speed 3-axis universal machining center with 7-station pallet changer. Operating hours: 44,899 hours. Load hours: 32,369 hours. Spindle time since replacement: 13,350 hours. Gantry-style machine with a solid monoblock polymer concrete construction, compact linear ball bearings, Heidenhain direct measuring system, hydraulic power unit for tool and pallet clamping, and digital drives with liquid-cooled Siemens AC servo motors. Accessories: 1 BURN refrigeration unit, 1 Keller L-Cut extraction system (built in 2012), PS 32 setup button, and tool blow-off device. Machine dealer with own stock of 1600 m².

Condition: used, Approx. 7 m double-walled chimney / flue made of stainless steel with floor console (insulated with approx. 25 mm mineral wool) incl. all clamping straps and hood. The system was only in operation for approx. 1.5 years. Fsdoru Hn Ropfx Agrjpb Diameter (inside): approx. 400 mm, Diameter (outside): approx. 470 mm, Length (: approx. 7 m, Insulation: 25 mm mineral wool

Condition: ready for operation (used), Year of construction: 1984, sheet width 3040 mm plate thickness 4 mm distance between columns 3040 mm stroke of upper beam 200 mm adjustment of lower and bend clamping 100 mm total power requirement 6,4/3 kW weight of the machine ca. 6,3 t dimensions of the machine ca. 4,3 x 1,2 x 1,8 m Motorized folding machine with double-sided bending beam drive, lower, upper and bending beam adjustable, drive motors as brake motors - slip clutches as overload protection, bending angle adjustment via potentiometer, operating modes: individual switching for each work step by hand switch, SEGMENTED TOP RAIL 120 mm height (Photo 7).Please notice that such a machine now costs about Fpjdjxwzbbspfx Agrjb €70.000,--. As usual, the sheet thickness is based on a strength of 40 kg / mm². Machine dealer with own stock of 2500 m².

Condition: used, Year of construction: 2014, working width 250 mm working length 250 mm work height max. 280 mm laser capacity in Watt 400 Rofin travel -z axis 10 - 1000 mm/s positioning accuracy +/- 0,1 mm repeating accuracy +/- 3,5 my capacity 6,8 kVA Fpodpfx Aowdiwysgreb Required air-pressure 6-10 bar Type of gas Schutzgas Stickstoff 5 bar dimensions of the machine ca. 5,9 x 4,2 x 3 m range L-W-H 2,44 x 1,63 x 2,36 m weight 2 300 kg Little used Concept Laser M2 Cusing system for processing reactive and non- reactive powder materials. Design of process chamber, handling station, powder suction according to ATEX Directive II for flammable substances. Materials: steel, stainless steel + aluminum. Supplementing titanium against additional payment possible. Dynamic coating system with 3 different wiper blades. Peripherals and accessories: Rofin laser source - photo 4 Nitrogen generator (in the other room, photo 7) External filter including fan and operating hours counter: 10464 - Photo 8. Storage container for the filter inserts. Transport device with lift for powder loading - photo 9. 6 stainless steel powder charging containers. Pneum. Vibrating sieve for attachment to the powder container. Powder container rack for swap containers, dimensions 1.15 x 0.17 x 1.22 m - photo 10. Orange wet vacuum cleaner - photo 8. Selling due to production change. Price at the time € 1/2 mio! Vid 1: Machine outside, Vid 2: Machining - created on this machine, Vid 3: Slide show Workpiece creation on this machine + accessories. Machine dealer with own stock of 1600 m².