Used Quill for sale (1,304)

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Dsdpfjxddwrox Afnjcc Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: good (used), Drill sleeve, round rack, rack, sleeve for drilling machine, bench drill, pillar drill, column drill, box-type drill, thread cutting machine, tapping machine -Drill quill: round rack -Recording: MK2 -Dimensions: see photos / technical drawing with dimensions -Dimensions: Ø 62 x 267 mm Dcodoiqhhgjpfx Afnoc -Weight: 4.3 kg

Condition: used, Quill for jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Stroke: 60 mm -in: a wooden box -Dimensions: 390/340/H170 mm Dodpfx Aefc R D Iefnscc -Weight: 15.8 kg

Condition: good (used), Bezel, setting stick, lynette -Number: 3x bezel quills -Diameter: 60 mm Djdpfx Afeb Ri S Uonscc -Length: 140 mm -Grooves: 6/10 mm -Edition: Gray cast iron -Weight: 6 kg

Condition: good (used), machining unit, drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Manufacturer: Perske, Quill machining unit -Drive: 1.5 kW -Speed: 2800 rpm -Stroke: 55 mm -Dimensions: 720/200/H175 mm Dcodsvm U Nuspfx Afnoc -Weight: 38 kg

Condition: used, Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. Feed stroke: 150 mm -Drive: 1.1 kW 2750 rpm -Thread: M8 Djdpscgqdfofx Afnocc -Number: 3x drill heads available -Price: per piece -Dimensions: 700/180/H180 mm -Weight: 26 kg/piece

Condition: used, Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine Djdpfeci Ahtex Afnocc -Max. Feed: stroke 150 mm -Drive: 1.5 kW 2750 rpm -Admission: thread -Number: 1x drill heads available -Price: per piece -Dimensions: 700/200/H180 mm -Weight: 18.3 kg/piece

Condition: used, Quills, processing unit, automatic drilling machine, drilling machine, standing drill, multi-spindle drilling machine -2x: quill machining units -1x: Horizontal -1x: vertical -Max. Feed: stroke mm -Speed: rpm Dcodpfxechnx Uo Afnoc -Built-in drill chucks: 1.5-13 mm -Dimensions: 1050/1205/H1550 mm -Weight: 222 kg

Condition: used, Processing unit, automatic drilling machine, drilling machine, floor drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 1.1 kW -Speed: l 2665 rpm Dedsb A Tcpepfx Afnscc -Thread recording -Adjustable drilling distance: 15-65 mm -Number: 2x processing units available -Price: per piece -Weight: 23 kg/piece

Condition: excellent (used), For sale: heavy-duty lathe tailstock with manual quill feed and locking mechanism. Made of cast iron with a very solid construction – ideal for large conventional lathes. Condition as shown in the photos – the quill moves smoothly, no play in the base, guiding surfaces are in good shape. Suitable for modernization or as a base for machine rebuilding. Specifications: • Quill diameter: 100mm • Quill travel: approx. 320 mm • Sleeve seat diameter: 44mm • Manual drive: hand crank + locking lever Dcodpfew Rdl Rox Afnoc • Base with bolt-on mounting • Weight: approx. 70–90 kg Possible pallet shipping or personal collection.

Condition: good (used), Bezel, setting stick, lynette -Quads: for bezel, 3 pieces -Diameter: 40 mm -Length: 170 mm -Groove: 7.7 mm -Weight: 4.2 kg Dcedpfehf Nh Sjx Afnsc

Condition: used, Grinding quills: 16 - 40 mm Djdpfxediuiro Afnjcc

Condition: ready for operation (used), Year of construction: 2002, operating hours: 19,300 h, functionality: fully functional, turning length: 750 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 750 mm, swing diameter over bed slide: 320 mm, TECHNICAL DETAILS Swing diameter over bed: 320 mm Dcsdpfjycuvkjx Afnec Swing diameter over cross slide: 150 mm Turning length: 750 mm Travel X-axis: 185 mm Travel Z-axis: 750 mm Bar capacity: 52 mm Spindle speeds: 4,000 rpm Spindle nose: 55027/A6 DIN Spindle drive: 9 kW Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 8 m/min Tailstock quill diameter: 70 mm Tailstock quill stroke: 120 mm Tailstock taper: MT 5 MACHINE DETAILS Control: Heidenhain Manuel Plus Dimensions & Weight Machine dimensions: 2,450 x 1,668 x 1,825 mm Machine weight: approx. 2.0 t Operating hours: approx. 19,300 h EQUIPMENT 3-jaw chuck Tailstock Multifix size B Documentation

Condition: good (used), Year of construction: 1998, grinding wheel diameter: 915 mm, overall weight: 14,000 kg, GIUSTINA Grinder R242 to ground big bearings (up to 800mm). All machine's actions are controlled by Bosch Control. Beside controlling parts grinding process, the NC programs are also an operator guide for the machine set up and a source of information about wheel wear, thus allowing the operator to check wheels without opening the hood. Equipped with: Bosch CNC Control Specifications: Wheel Rotation Axis: Horizontal Grinding Wheel Size (OD): 915 mm Dedsrtr D Iepfx Afnscc Grinding Wheel Size, Usable Width: 65 mm Grinding Wheel Size, Peripheral Speed: 30 ms Spindle Motors: 75 kw Grinding Feedrate: 0.1 - 1000 mm/min Spindle Type: Moving Quill Angular Contact Spindle Bearings (Precision): ABEC-7 (ISO4) Slide Position Accuracy: 0.001 mm Coolant Flow Rate: 600 l/min Work Capacity (Approx) Rotary: 20 -200 Dia. In.

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Dedewwarujpfx Afnjcc Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Dcodpfx Asv Nw Npofnoc Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: good (used), center height: 215 mm, grinding length: 1,500 mm, total width: 2,300 mm, total length: 5,530 mm, total height: 2,100 mm, grinding diameter: 430 mm, Matrix Okuma Universal Cylindrical Grinder Model: GU – 40 Max Dia Ground: 430mm Max Between Centres: 1500mm Dcsdpfoyglhfox Afnoc Wheel Size: 355 x 50 x 127mm Headstock Speed: 10-150 RPM Variable Table Swivels: 8 Degree Machine With: Coolant Filtration Tank Steadies Internal Grinding Attachment with Quill Dimensions: 5530 x 2300 x 2100mm High Weight: 6200 Kgs

Condition: used, Year of construction: 2009, dist. between centers 4.500 mm greates pass round over bed 820 mm Maximum cutting diameter 530 mm control Heidenhain Manual Plus 4110 workpiece weight max. 2.500 kg spindle bore 128 mm spindle nose DIN 55027 B11 turning speed range - spindle 0 - 1800 U/min phase 1 0 - 450 U/min phase 2 20 - 1.800 U/min Max. torque stage 1 3.000 Nm Max. torque stage 2 540 Nm travel -x axis 360 mm travel -z axis 4.500 mm feed capacity - x 10 kN rapid traverse 10.000 mm/min dia. of quill 115 mm total connected load 55 kVA machine weight ab. 7000 kg dimensions of the machine ca. 6.500 x 1.840 x 1.860 mmxmmxmm Equipment/accessories: -1 x faceplate -5 x jaw chucks -1 x closed steady rest Dcodpfjyhq Tvjx Afnsc -Clamping jaws -Multifix holder -Turning tools -Various tips -Technical documentation

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min Dsdpsv Dxw Refx Afnecc spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5,0 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: good (used), Year of construction: 2018, Automation system Turning diameter over bed: 760 mm • Turning diameter over cross slide: 600 mm • Maximum turning diameter: 460 mm Distances • Distance spindle – tailstock center (TA640): 689 mm • Distance chuck – tailstock (TA640): 625 mm Travel paths • X-axis travel: 310 mm • Z-axis travel (TA640): 640 mm • Y-axis travel: +70 / −50 mm • B-axis travel (TA640): 640 mm Rapid traverse • Rapid traverse X: 30 m/min • Rapid traverse Z: 30 m/min • Rapid traverse Y: 15 m/min • Rapid traverse B: 11 m/min (optional 30 m/min) Axis dynamics • Axis acceleration: 1 g (9.8 m/s²) Spindle • Maximum spindle speed: 3500 rpm • Spindle bearing Ø outer: 200 mm • Spindle bearing Ø inner: 130 mm • Spindle nose: ASA 8” A2 • Spindle bore: 86 mm • Bar capacity through draw tube: 78 mm Chuck • Chuck Ø: 250 / 315 mm • Chuck bore Ø: 77 mm Power & Torque • Main spindle power: 42 / 27 kW (max. / S6 40%) • Maximum torque: • 1020 Nm (max.) Dedpjyhqg Nofx Afnscc • 720 Nm (S6 40%) Tailstock • Morse taper: MT5 / MT3 • Tailstock travel (TA640): 640 mm • Maximum quill pressure: 1350 kgf

Condition: good (used), Year of construction: 2018, Turning diameter over bed: • 760 mm Turning diameter over cross slide: • 600 mm Maximum turning diameter: • 460 mm Distance spindle – tailstock center TA400: • TA15: 490 mm • TA20: 473 mm • TA25: 473 mm • TA30: 449 mm TA640: • TA15: 730 mm • TA20: 713 mm • TA25: 713 mm • TA30: 689 mm TA1100: • TA15: 1190 mm • TA20: 1173 mm • TA25: 1173 mm • TA30: 1149 mm Distance chuck – tailstock TA640: • TA15: 666 mm • TA20: 649 mm • TA25: 649 mm • TA30: 625 mm TA1100: • TA15: 1126 mm • TA20: 1109 mm • TA25: 1109 mm • TA30: 1085 mm Travels X-axis: • All models: 310 mm Z-axis: • TA400: 400 mm • TA640: 640 mm • TA1100: 1100 mm Y-axis: • +70 / −50 mm (for Y versions) B-axis: • TA400: 400 mm • TA640: 640 mm • TA1100: 1100 mm Rapid traverses X-axis: • 30 m/min Z-axis: • 30 m/min Y-axis: • 15 m/min B-axis: • 11 m/min (standard) • 30 m/min (option) Axis acceleration: • 1 g = 9.8 m/s² Spindle Maximum spindle speed • TA15: 4,500 rpm • TA20: 4,000 rpm • TA25: 4,000 rpm • TA30: 3,500 rpm Spindle bearing Ø outer • TA15: 150 mm • TA20: 170 mm • TA25: 170 mm • TA30: 200 mm Spindle bearing Ø inner • TA15: 100 mm • TA20: 110 mm • TA25: 110 mm • TA30: 130 mm Spindle nose • TA15 / TA20 / TA25: ASA 6" A2 • TA30: ASA 8" A2 Spindle bore • TA15: 61 mm • TA20: 73 mm • TA25: 73 mm • TA30: 86 mm Bar capacity through draw tube • TA15: 52 mm • TA20: 66 mm • TA25: 66 mm • TA30: 78 mm Chuck Chuck diameter: • TA15: 175 / 210 mm • TA20: 210 mm • TA25: 250 / 210 mm • TA30: 250 / 315 mm Chuck bore Ø: • TA15: 56 / 52 mm • TA20: 66 mm Dcodpfx Afjyhqavjnec • TA25: 66 mm • TA30: 77 mm Power & torque Main spindle power (kW): • TA15: 14 / 8 • TA20: 22 / 15 • TA25: 35 / 19 • TA30: 42 / 27 Maximum torque: • TA15: 292 Nm (max) / 153 Nm (S6 40%) • TA20: 366 Nm (max) / 286 Nm (S6 40%) • TA25: 900 Nm (max) / 363 Nm (S6 40%) • TA30: 1020 Nm (max) / 720 Nm (S6 40%) Tailstock Morse taper: • MT3 / MT4 Tailstock travel: • TA400: 400 mm • TA640: 640 mm • TA1100: 1100 mm Max. quill pressure: • TA15: 930 kgf • TA20: 980 kgf • TA25: 980 kgf • TA30: 1350 kgf

Condition: excellent (used), Year of construction: 2000, Machine-Details: Stock-No. 1022-2416 Type of machine Tool Room Milling Machine - Universal Make DECKEL Type FP 1 Year of manufacture 2000 Type of control conventional Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min Dcodpfx Afsyhdbmsnjc feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information: The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: new, The R 60 VT PRO is a high-quality radial drilling machine that belongs to the Radial Drilling Machines category, representing the latest generation of conventional radial drill presses from KNUTH. This versatile machine simplifies the machining process, supporting precise drilling, countersinking, and thread cutting—ideal for single parts and small batch productions. Built with premium cast materials, its robust design features a large column and torsion-resistant boom, ensuring stability and reliability. Key functionalities include an electronically controlled servo quill feed with a large touchscreen display, automatic thread cutting capabilities, and a powerful coolant system, all designed to streamline operations. The machine offers adjustable height for the boom, central lubrication for maintenance ease, and a variety of user-friendly interfaces for setting operating parameters. With a drilling capacity of 60 mm and throat depth from 350 to 1,600 mm, this robust and advanced radial drilling machine makes daily production tasks smoother. You can request a quote or order online to enhance your machining capabilities with the R 60 VT PRO. Dodpfou E Hzwox Afnjcc

Condition: new, The SSB F 60 Super VT PRO is a cutting-edge Column Drilling Machine that exemplifies KNUTH's commitment to delivering robust and precise machining solutions. Designed for versatile operations, this machine excels in drilling, countersinking, reaming, and tapping, making it a perfect fit for workshops tasked with single and small series production, especially in steel construction and maintenance of large systems. The machine features an electronically controlled servo quill feed complete with a large touchscreen control panel for intuitive operation and effortless selection of machining parameters. Its heavy-duty construction, characterized by a durable cast iron build, ensures high drilling and thread cutting capacity, while the motorized table height adjustment and ± 45° swivel range enhance flexibility during use. With standard features including automatic thread cutting cycles, an efficient coolant system, and a comprehensive accessory set, the SSB F 60 Super VT PRO stands out as an invaluable tool in any professional setting. You can order online today to elevate your machining capabilities with this precision-engineered drilling machine from KNUTH. Dodpfxsq Rdqnj Afnecc

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: G00399, turning length: 2,000 mm, turning diameter: 560 mm, spindle bore: 82 mm, spindle speed (max.): 2,200 rpm, controller model: FANUC Series oi-TC CNC, TECHNICAL DETAILS Turning diameter: 560 mm Turning length: 2,000 mm Spindle speeds: 2,200 rpm Spindle bore: 82 mm Tailstock quill taper: MK 5 Quill stroke: 150 mm MACHINE DETAILS Control: FANUC Series oi-TC CNC Total power requirement: 7.5 kW Dimensions & weight Space requirement: approx. 3,800 x 1,750 x 1,600 mm Machine weight: approx. 3,800 kg EQUIPMENT 3-jaw chuck 250 mm 6-position tool turret Coolant system Dsdeygxipopfx Afnscc Automatic pressure lubrication 1x travelling steady rest 1x fixed steady rest 2x machine lights