Used Thread for sale (2,372)

Condition: used, Thread rolling machine UPWS 25. Ljdozd Rf Nspfx Abnoac

Condition: new, THREAD ROLLING ROLLERS Lasdszdv Trepfx Abnoc

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1028, Thread Rolling Machine LEISTRITZ RT 400-CCA Laedpfxoxytmhj Abnec Year of manufacture: 2004 / Control system retrofit in 2019 Connection voltage: 3x400 V Frequency: 50 Hz Rated power: 65 kW Main fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Maximum shaft length: 275 mm Minimum shaft length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Space requirement: 3.4 m x 2.9 m x 2.2 m Weight: 4900 kg Accessories: - Coolant filtration system - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm)

Condition: good (used), Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head, thread cutting chuck Lajdpfxjv T Ufco Abnjc -Manufacturer: Efem, thread cutting head thread cutter four-jaw chuck type G3 -Cutting jaws: not included -Bore: Ø 27 mm -Hole: Ø 40 mm -Dimensions: 160/130/H175 mm -Weight: 3.8 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, Pressing force: 10 t Workpiece diameter - max.: 2-50 mm Control system: SIEMENS SIMATIC Ledezd Dibopfx Abnjac Total power consumption: 12 kW Machine weight (approx.): 2.5 t Dimensions L x W x H: 1300 x 1500 x 1600 mm Roller stroke: 80 mm Smallest/largest center distance between roller spindles: 117/197 mm Roller spindle height above machine bed: 160 mm Max. tool diameter: 175 mm Roller spindle mounting diameter: 54 mm Roller spindle mounting length: 75 mm Swiveling angle of roller spindle: -/+ 10 degrees Roller spindle speed (variable): 10-100 rpm Motor for roller spindle drive: 7.5 kW Accessories: several thread rolling tool sets

Condition: good (used), Year of construction: 1973, pressure 0,5 - 10 t max. workpiece diameter 2 - 50 mm Laedpfxjzd Hhao Abnec threading length 2000 mm pitch in mm 3 mm diameter of roll spindle taper 54 tool diameter 145 mm roll spindle turning speed range 41 - 129 U/min stroke 0 - 8 mm total power requirement 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3 x 1,2 x 1,2 m

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during Lajdpfx Abev T Trujnsc work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: used, Diameter 48 mm Bilz threaded adapter Diameter 63 mm Variolock connection Length 160 mm Overall length 180 mm Lajdeb Tyqpepfx Abnjc 2 pieces available

Condition: used, Thread taps for pipe threads Pilot and finishing taps Laedpodk Rdvsfx Abnjc R 2 3/4 inches

Condition: as good as new (ex-display), 1 3/4 inches – 5 1 3/8 inches – 5 1 1/8 inches – 7 7/8 inches – 9 5/8 inches – 11 1/2 inch – 13 3/8 inch – 16 Lodpedwbk Rjfx Abnsac 5/16 inch – 18 1/4 inch – 20 Individual acceptance testing is possible.

Condition: excellent (used), Thread tap for pipe threads Manufacturer: May Type: R 3 3/4 inch Lajdofhdwqspfx Abnsc Overall length: 185 mm

Condition: excellent (used), Tapping attachment Efem No.1 for internal thread Mounting MK 2 Tapping head Ledpotqlq Eefx Abnoac Adjustable slip clutch Thread M3 - M10 Mechanical condition very good optically there are traces of storage

Condition: used, Year of construction: 2007, Manufacturer: ORT Model: RP18 Year : 2007 Maximum rolling thrust 18 Ton Roller shaft diameter 54 mm Roller shaft key 12 mm Minimum diameter workpiece to rolled 3 mm Maximum diameter workpiece to be rolled 60 mm Max.length workpiece rolled in plunge-feed 175 mm Max.length workpiece to rolled in enfilade — Maximum Pitch workpiece to be rolled 4 mm Maximum roller diameter 185 mm Main motor power 7,5 HP Total installed power 11 HP Maximum noise level 80 db Lasdpfov Tqdbjx Abnoc Net weight 1800 kg Height Rolling shaft from the floor 1035 mm Machine width 1450 mm Standard machine depth 900 mm Total machine height 1800 mm

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck, quick-change thread chuck -Manufacturer: Holex, Thread cutting chuck, quick-change thread chuck, 7 pieces -Type: 335620-10 Ljdpfx Ajzcu Srebneac -Size: M5 to M20, see photos -Submission/Price: complete -Transport dimensions: 330/120/H70 mm -Weight: 4.4 kg

Condition: used, Year of construction: 2011, workpiece diameter 320 mm threading length 570 mm thread pitch 315 mm total power requirement 17 kW weight of the machine ca. 12 t dimensions of the machine ca. m Laodpfot Hxbdex Abnoc

Condition: used, Year of construction: 1985, thread dia. 254 mm grinding length 350 mm thread pitch 51 mm Control SIEMENS S 8 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _____ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg Accessories / Special Features * This is a programme controlled (SIEMENS S 8) internal thread and internal worm grinding machine , suitable for the grinding of ball screw nuts. * All movements are controlled by the SIEMENS programme control * Automatic infeed for grinding depth. * Automatic diamond roll profile dressing device, motorized by hydraulic motor,and device can be swivelled and mechanically adjusted lengthwise. Lsdpfx Ajt Hw U Asbnoac * FISCHER Internal grinding spindle up to 30.000 rpm with oil and air lubrication and with Infinitely variable grinding spindle speeds. • 4-jaws chuck approx.. Ø 250 mm * Separate switch cabinet, separate hydraulic unit, oil drip pan, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1986, workpiece diameter 460 mm threading length 900 mm Lodpjt H Smtofx Abneac thread pitch 100 mm total power requirement 10 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm threading length 120 mm Control total power requirement 29 kW weight of the machine ca. 9,5 t Lasdpfjt Hw N Tjx Abnsc dimensions of the machine ca. m

Condition: used, Year of construction: 1991, workpiece diameter 30 mm threading length 110 mm thread pitch 0,5-2,75 mm/GG Lasdpfxst Hwzcs Abnjc total power requirement 4,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. m

Condition: used, Year of construction: 1979, workpiece diameter 320 mm threading length 300 mm thread pitch mm Laodpfxjt Hwnpe Abnoc total power requirement 90 kW weight of the machine ca. 12000 kg dimensions of the machine ca. m Thread and worm grinder for steering worms

Year of construction: 1985, condition: used, workpiece diameter 50 mm threading length 100 mm thread pitch mm total power requirement 1 kW weight of the machine ca. 1500 kg dimensions of the machine ca. m Laedpfxjt Hwn Ne Abnjc

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm threading length 3000 mm thread pitch 2-16 mm Lasdpfetzdyzsx Abnoc total power requirement 25 kW weight of the machine ca. 10,5 t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE certified Type RP 18/U Year 2012 Siemens SIMATIC OP17 CNC control panel Ledpfozb Imajx Abnjac Reference: F24

Year of construction: 1968, condition: good (used), 1 used thread whirling machine for lathes make Burgsmüller type L 2 serial number 68/1724 Laedpfx Aspit Afjbnec

Condition: like new (used), Threading jaws R 2 to GA 4 Threading jaws for Georg Fischer GA 4 threading machine as new Lajdpfx Aeivzcksbnjc GF Art. 012209