Used Surface Treatment for sale (7,601)

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components Gbodpfxez I Iv Re Al Usu The system consists of: Cabin with rotating table Wheel Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, Equipment: CE marking, Cleaning system that is the ideal solution for cleaning a wide range of parts with complex shapes; 2 units available. Gsdey D Rh Hspfx Al Uebu

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). Gbsdpfxoxqzmks Al Ueu 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Godpfewmm U Uox Al Ujbu

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: unexamined, machine/vehicle number: HY-1000LPH, input voltage: 220 V, total height: 2,000 mm, total width: 1,000 mm, total length: 2,300 mm, energy consumption: 4 kWh, Equipment: documentation/manual, Reverse osmosis unit, purchased in 2020, and only tested once in 2024. Gsdpfxoz Iqrns Al Uobu The machine is being sold as is.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, OKAMOTO ACC-16*24SA1 Precision Surface Grinding Machine Okamoto Precision Surface Grinding Machine ----- Model ACC-16•24SA1 Automatic Wheelhead Approach, Retraction to Start Position, Automatic Dress Cycle with Wheel Gsdpfx Aszmhknjl Usbu Wear Compensation, Shift Plunge Cycle--- ----- Grinding Capacity 16”x 24” Standard Accessories • Automatic Overhead Wheel Dresser • Touch Screen Controller with 10” Display With Compensation, including Diamond Tool • Vertical & Crossfeed Pulse Generator • Rapid Wheel head Retraction • Teach-Input Positioning • Load Meter for Grinding Wheel Motor • 5 HP Wheel Spindle Motor • Shift-Plunge Rough Grinding Cycle • Stainless Steel Wheel Guard • Selectable Rough/Fine Infeed Grinding Method • Leveling Bolts with Plates • Table Park for Safety • Necessary Tools & Tool Box • Stainless Steel Splash Guard • Installation and Training • Instruction Manual

Condition: excellent (used), Year of construction: 2024, operating hours: 6 h, functionality: fully functional, Manufacturer: Spaleck Oberflächentechnik Model: Z1 Year of manufacture: 2024 Used, like new condition Operating hours: 6 h Technical data according to the manufacturer: Working container volume: 11 l Gbjdpfx Aez H Rfxol Ueu Usable volume: 7 l Turntable speed: approx. 280 rpm Drive power: 0.75 kW Height of working container: 1,000 mm Operating voltage: 400 V, 50 Hz Dimensions (W x D x H): approx. 530 x 950 x 1,350 mm The system has been dismantled and is stored at our facility. An inspection is possible by appointment.

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding length: 450 mm, grinding width: 150 mm, total height: 2,129 mm, total length: 1,940 mm, total width: 1,317 mm, workpiece weight (max.): 120 kg, grinding height: 510 mm, grinding wheel diameter: 205 mm, distance table to spindle center: 510 mm, table length: 510 mm, table load: 120 kg, type of input current: three-phase, table width: 150 mm, overall weight: 1,250 kg, grinding spindle motor power: 1,500 W, travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, rotational speed (max.): 2,400 rpm, grinding spindle speed: 2,400 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, 2001 Okamoto ACC-450DXA Surface Grinder | 450 x 150mm Used 2001 Okamoto ACC-450DXA Hydraulic Surface Grinding Machine for Sale – 450 x 150mm Grinding Capacity – Automatic Grinding Cycle – Spare Grinding Wheels Included Manufacturer: Okamoto Model: ACC-450DXA Machine Type: Hydraulic Surface Grinder Year: 2001 Condition: Working Well Includes: Coolant Equipment Magnetic Chuck Cross Feed Digital Display Vertical Digital Display Wheel Guard Spare Grinding Wheels Machine Description Used 2001 Okamoto ACC-450DXA precision surface grinder available for sale. The Okamoto ACC-450DXA is a compact, high-quality hydraulic surface grinding machine designed for accurate flat and form grinding applications in precision engineering, toolrooms, mould and die shops and general manufacturing environments. The machine provides an approximate 450 x 150mm grindable surface, with 530mm longitudinal table travel and 175mm cross travel, making it particularly suitable for precision grinding of small and medium-sized components. The DXA version features an automatic grinding cycle, combining hydraulic table movement with controlled crossfeed and vertical grinding functions to provide repeatable production grinding while remaining straightforward to set and operate. This machine is supplied with a selection of spare grinding wheels. Gbedpez Rqk Rsfx Al Uju Main Specifications Manufacturer: Okamoto Model: ACC-450DXA Year: 2001 Machine Type: Precision Hydraulic Surface Grinder / Surface Grinding Machine Grinding Capacity Maximum Grindable Surface: Approx. 450 x 150mm Table Working Area: Approx. 510 x 150mm Longitudinal Travel: Approx. 530mm Cross Travel: Approx. 175mm Distance from Grinding Wheel to Table: Approx. 60–510mm Maximum Table Load: Approx. 120kg The generous longitudinal movement relative to the 450mm grinding length allows the wheel to clear the component during the grinding cycle. Grinding Wheel & Spindle Grinding Wheel Diameter: Approx. 205mm Grinding Wheel Peripheral Speed: Approx. 2,400m/min Grinding Spindle Motor: Approx. 1.5kW The spindle arrangement is designed for precision surface grinding where good finish, flatness and dimensional accuracy are required. Additional Drive Motors Hydraulic Pump Motor: Approx. 0.75kW Crossfeed Motor: Approx. 0.75kW Grinding Head Up/Down Motor: Approx. 0.4kW DXA Automatic Grinding Cycle The ACC-450DXA version is designed to provide an automatic grinding cycle, making it suitable for repetitive precision surface grinding operations. The DX-series design incorporates features aimed at both rough and finish grinding, including: Automatic grinding-cycle capability Hydraulic longitudinal table movement Powered crossfeed Powered vertical grinding-head movement Coarse and fine vertical feed Precision feed adjustment Robust saddle-type construction Hand-finished precision guideways Automatic lubrication system These features make the ACC-450DXA suitable for both one-off toolroom work and repetitive component grinding. Approximate Machine Dimensions Overall Length: Approx. 1,940mm Overall Width: Approx. 1,317mm Overall Height: Approx. 2,129mm Machine Weight: Approx. 1,250kg

Condition: good (used), Year of construction: 2014, machine/vehicle number: 59 526 05 221 0010, functionality: fully functional, operating hours: 1,000 h, power: 20 kW (27.19 HP), input voltage: 380 V, input current: 33 A, type of input current: three-phase, temperature: 650 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,800 mm, total width: 1,600 mm, total height: 1,900 mm, overall weight: 350 kg, number of chambers: 1, control type: manual, actuation type: electric, fuel type: electric, Equipment: CE marking, Hardening furnace Vötsch VAW 60/100, in good condition. For sale due to business closure. Very reliable furnace; the temperature difference in the combustion chamber at 500°C is +/- 15°C. The furnace was operated at a maximum temperature of 500°C during production. Godsz Rnwhepfx Al Usbu The door seal is in good condition. The new price was EUR 38,000.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 1107, total height: 1,700 mm, total length: 1,000 mm, total width: 900 mm, overall weight: 350 kg, For sale is a compact surface grinding machine from the German manufacturer Degen. Model FSM300E. In very good used condition. The machine has seen little use. A very high-quality and precise machine, ideal for tool or prototype construction. Gbsdjz E S Hbopfx Al Uju Due to its small footprint, it is also suitable for small workshops. Grinding length: 300mm Cross travel: 170mm Max. distance between magnetic chuck and grinding wheel: 290mm Rapid traverse in height adjustment Magnetic chuck: 300x150mm Space requirement: length 1.0 m x width 0.9 m x height 1.7 m Machine weight: approx. 350kg Includes coolant system, electromagnet, wheel dressing device, and extraction system. The machine runs perfectly and grinds with precision. Can be tested while powered on. Location: 5023 Salzburg.

Condition: excellent (used), Year of construction: 2018, Geibel & Hotz FS 640 SC Surface grinding machine Geibel & Hotz FS 640 SC with BR control, manufactured in 2018, in SUPER condition. CE compliant!! The machine comes from the testing department of an engineering company. Technical data: Year of manufacture: 2018 Brand: G+H SCHLEIFTECHNIK Model: FS 640 SD Clamping area: 600 x 400 x 375 mm Table load max.: 600 kg Distance table - spindle center min./max.: 140-525 mm Grinding wheel dimensions: 300 x 50 x 76.2 mm Length x Width x Height: 3000 x 2800 x 2500 mm Gbsdpfsz Rnh Tox Al Usu Motor power: 3.7 kW Weight: 2300 kg About the machine: Offered is a surface grinding machine Geibel & Hotz FS 640 SC with BR control. This universal surface grinding machine is in very good original condition. It comes from a company where it was only used for testing purposes. It features a very easy-to-use control system. A grinding travel of 600 mm in the longitudinal axis and a transverse travel of 400 mm make it suitable for toolmaking, jig and fixture construction, and small-series production. A comprehensive standard equipment and the easy operation of the machine characterize this series. The stable design of the spindle head and the guide principle with double V-guides in the longitudinal and transverse axes guarantee lasting precision. The intuitive operation of the controls simplifies operation and significantly increases productivity. The guides are regularly lubricated by the central lubrication system. The Geibel & Hotz FS 640 SC with BR control has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Geibel & Hotz FS 640 SC on site under power. You can find more surface grinding machines from well-known manufacturers on our website.

Condition: used, Year of construction: 1962, We are offering this used Comag AF5 S 128 surface planer, serial number 641137, manufactured in 1962. Manufacturer: Comag Model: AF5 S 128 Year of manufacture: 1962 Condition: used Type: 641137 Gsdpfxjz Afbvs Al Uebu The advertised price is 2,200 euros net (negotiable). If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2006, machine/vehicle number: 65126, Grinding area: 630x350 mm, grinding wheel diameter: 350 mm, magnetic clamping plate, size: 600x300 mm, with coolant system, fleece filter system and automatic depth feed. Gedpfx Aoz Nhqxjl Ujbu

Year of construction: 1964, condition: good (used), Diskus Werke DSH 600/1000 Surface Grinding Machine This machine type is a machine with a motor-driven grinding spindle. The workpieces are clamped and ground using clamping devices that are adapted to the specific task. The devices are attached to the machine bed. The column carriage, on which the motor spindle is mounted, serves as a feed, dressing, and oscillating slide. Manufacturer: Diskus Type: DSH 600/1000 Operating voltage: 380 V DC voltage: 24 V Control voltage: 220 V Rated power: 27 kW Rated current: 56 A Year of manufacture: 1964 Condition: used You can find more new and used items in our shop! Gsdpfjhtyudsx Al Usbu International shipping costs available upon request!

Condition: good (used), Year of construction: 2000, Degen FSM 300 Surface Grinder High-quality precision surface grinder from the German manufacturer Willy Degen, model FSM 300. This machine is characterized by its compact design and extreme precision, making it ideal for tool and mold making. It is perfect for workshops with limited space, where accuracy must not be compromised. Extensive accessories and highlights included: Digital Readout (DRO): For precise work and error-free positioning. Original dust extraction and wet grinding unit: Ready for immediate connection for clean working and optimal workpiece cooling. Magnetic chuck: Already mounted for immediate use. Technical data (according to the nameplate): Manufacturer: Willy Degen (Schömberg) Type: FSM 300 Machine No.: 1309 Year of manufacture: 2000 Connection: 400 V / 50 Hz (high voltage) Power: 2.7 kVA / 5.6 A Control voltage: 24 V AC Gsdpjznirijfx Al Uebu "Everything from one source: We would be happy to offer you suitable financing for your project." More new and used items can be found in our shop! International shipping costs upon request!

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, approx. weight 16 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Godpsz Rnrlsfx Al Uobu Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm

Condition: excellent (used), SCM F520 Thickness Planer SCM thickness planer, manufactured in Italy. 4-knife cutterhead Width: 520mm Table length: 3000mm Infeed table adjustable in angle Table adjustable up and down hydraulically Infeed table adjustable for concave/convex surfaces Table height display Brake Well-maintained machine, in very good condition. Gbsdsz I N Nfspfx Al Uou Quiet operation.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 2,650 mm, total length: 4,100 mm, total width: 2,420 mm, feed length X-axis: 1,190 mm, feed length Z-axis: 390 mm, workpiece weight (max.): 525 kg, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 1,600 m/min, feed rate Z-axis: 2,000 m/min, table speed: 30,000 mm/min, spindle speed (max.): 4,000 rpm, overall weight: 5,400 kg, grinding spindle motor power: 37 W, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, Equipment: documentation/manual, rotational speed infinitely variable, ELB Smartline, fully functional, available for sale due to business closure. Please refer to the machine description for technical details. Gbjdez Dabwopfx Al Uou Additionally, oil mist separator, original packaging.

Condition: excellent (used), CATALOG NUMBER 7479 Technical specifications: - Shaft width 410mm - 4-knife shaft (TERSA) - Noise reduction comb - Shaft guard - Table length 2610mm - Longer infeed table 1435mm - Cast iron tables - Both tables adjustable - Original, adjustable cast iron guide, angle adjustable - Brake - Diameter of dust extraction outlet 115mm - Motor 4kW - Dimensions (L/W/H) 2610x960x1110mm - Weight 578kg ADVANTAGES – Made in Italy – 4-knife shaft – brake – Noise reduction comb – longer infeed table – unpainted – Used planer, very good condition, original DTR documentation Net price: 21900 PLN Net price: 5093 EUR, depending on the exchange rate of 4.30 EUR Godezx Sznspfx Al Uobu (Prices may change due to higher fluctuations)

Condition: used, Surface Grinding Machine ABA FFV 1000/50 Travel X: 1000 mm Travel Y: 500 mm Travel Z: 400 mm Magnetic chuck dimensions: 1000 x 400 mm Auto stepover X / Y / Z Separate electrical panel Separate lubricant tank Gbedez I Awpopfx Al Ueu Separate hydraulic group Voltage: 380 V Length: 4000 mm Depth: 1700 mm Total height: 2300 mm Weight: approx 6 T

Condition: ready for operation (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, Scraping straightedge made of grey cast iron L1000xB130 mm Price €150.00 Scraping straightedge made of grey cast iron L1000xB50 mm Price €100.00 Scraping straightedge made of grey cast iron L1000xB50 mm Price €100.00 Surface plate made of hard stone L680xB150 mm Price €100.00 Measuring cylinder D85 x L300 made of hardened steel Price €100.00 Surface plate with 2 handles L250x80 mm Price €20.00 Square surface plate 75x75x150 Price €100.00 Round surface plate D170 mm Price €20.00 Gbsdpfoyxywyox Al Uou Euro pallet with base and frame €30.00 All items can also be purchased individually No guarantee is given for condition, straightness, or accuracy

Condition: used, Year of construction: 1997, Working width: 500 mm Planer cutterhead: Strip cutter Number of cutters: 4 Length of surfacing table: 2800 mm Adjustment of surfacing table: Lever Indication of chip removal: Scale Adjustable angle of the fence: yes Motor power: 5.5 kW Gbedpsz I Iumsfx Al Ueu Machine length: 2800 mm Machine width: 1000 mm Weight: 900 kg

Condition: used, Year of construction: 2011, workpiece weight (max.): 3,600 kg, overall weight: 3,600 kg, Equipment: documentation/manual, CNC Tangential Surface Grinder • Manufacturer: MECCANICHE LODI S.r.l. (Italy) • Model: RT 60.35 CNC • Year of commissioning: April 2011 (Purchased new from VFM Machines SA) • Location: Boécourt (JU), Switzerland • Condition: Very good overall condition, first owner. Sold with its original instruction manuals in French and complete technical documentation. Machine certified to comply with CE standards. 📊 Main Technical Specifications (VFM/Lodi Data): • Grinding length: 600 mm • Grinding width (with grinding wheel width): 400 mm • Grinding height from the table: 400 mm • Maximum longitudinal travel: 750 mm Gedpjz Eru Ejfx Al Ujbu • Maximum transverse travel: 350 mm • Grinding wheel dimensions: 400 x 50 x 127 mm bore • Table travel speed: 1 to 35 m/min (continuously adjustable, driven by two hydraulic cylinders) • Spindle speed: 1,450 rpm (7.5 kW / 10 HP motor) • Net machine weight (machine only): Approx. 3,600 kg ⚙️ Design & Drive System: • High-rigidity cast iron frame and column, cast iron table with honeycomb structure. • Longitudinal guidance by linear slides (centralized automatic lubrication). • Transverse and vertical guidance by high-precision needle rails. • Transverse and vertical movements driven by precision ball screws and high-performance Yaskawa brushless motors. • Integrated Yaskawa frequency converter for continuous speed adjustment and spindle braking. • Micrometric movements via electronic handwheel. • Air / Oil heat exchanger for the hydraulic unit. 💻 Automation & CNC Cycles: • Electrical cabinet with original CNC control system managing the display of vertical/transverse dimensions. • Complete automatic cycles: programming and management of roughing, finishing, spark machining, and feed rates (minimum step of 0.001 mm). • Automatic dressing device on the grinding wheel head, with integrated automatic compensation for grinding wheel wear. ❌ Peripherals NOT included: • Machine sold WITHOUT its magnetic chuck. A quote is currently being prepared for a new chuck at CHF 3,500. • Machine sold WITHOUT its lubrication/sedimentation tank. (Ideal for a workshop wishing to integrate the machine into its own coolant filtration system or install a specific new magnetic chuck). 💰 Sales Conditions: • Asking price: CHF 15,000 (net) (Price negotiable at the machine) • Type of transaction: Professional sale (Swiss VAT will be added if applicable). • Delivery conditions: EXW / Ex Works (Boécourt, Switzerland). The machine is sold on the ground. Disconnection of fluids and electricity will be carried out by us. Crane operation, loading onto a truck, and transportation are entirely the responsibility and cost of the buyer. • Availability: Immediate. Removal after full payment has been received.

Condition: used, Year of construction: 1992, completely shut down used good condition cleaned functionally tested partially overhauled Manufacturer: Martin Type: T 53 Year of manufacture: 1992 Machine no.: V190268 GS-tested for wood dust Control panel at the top Pendulum guard Table edges with low noise Safety cutter block Table adjustment with foot-operated hydraulics Digital display for chip thickness Digital display for groove depth Automatic brake Groove depth adjustment Motor kW: 5.5 Planing width approx. mm: 510 Table length approx. feeding length mm: total 2840 Dust extraction connection D mm: 160 Space requirement approx. L x W x H mm: 2900 x 900 x 1100 Weight approx. kg: 1000 Storage location: 97447 Gerolzhofen, free loading, unpacked Gbsdpsz Np I Eefx Al Uou Handover in the current condition as inspected, without guarantee or warranty.

Condition: ready for operation (used), Year of construction: 1982, machine/vehicle number: 16-176-82, power: 50 kW (67.98 HP), input voltage: 380 V, input current: 12 A, input frequency: 50 Hz, type of input current: AC, control type: manual, actuation type: electric, fuel type: electric, Equipment: documentation/manual, Two used high-frequency (HF) machines from the manufacturer AMYSA-YVERDON SA, type AM 176, are for sale. These machines are particularly suitable as sources of spare parts, for retrofitting, or as a basis for a customized rebuild. They are offered in their current condition, as shown in the photos. Machine 1 Manufacturer: AMYSA-YVERDON SA Type: AM 176 Machine number: 16-176-82 Voltage: 380 V / 50 Hz Power: 7.5 kVA Current consumption: 12 A Machine 2 Manufacturer: AMYSA-YVERDON SA Type: AM 176 Gbsdpsz A E Erefx Al Uju Machine number: 03-176-82 Voltage: 380 V / 50 Hz Power: 6.5 kVA Current consumption: 10 A The existing mechanical, hydraulic, and electrical components, as well as the installed control systems, are included in the offer. The HF generators and resonant circuits are not included in the offer. These are older, used industrial machines. Complete functionality is not guaranteed. An inspection can be arranged by appointment. The machines are currently being disassembled. Collection by the buyer at the location in the Basel region, Switzerland. Price: CHF 2,500 per machine, negotiable Package price for both machines available upon request. Sale from the location, without warranty and excluding any liability for defects.