Used Surface Table for sale (20,403)

Condition: ready for operation (used), Year of construction: 2021, DELTA LC 400 / Year of manufacture 2021 / Rotary table grinding machine -CE marking -Year of manufacture 2021 -Magnetic table - rotary table 300mm -Max. grinding diameter 400mm -Distance column - grinding spindle axis approx. 315mm -Grinding height - magnet - grinding wheel approx. 215mm -Grinding spindle speed 2840 rpm Gbjdszrpdmjpfx Am Ajr -Fine feed 0.01mm -Lateral retraction device -Spindle motor approx. 3 KW -Dimensions of cup wheel 200x80x78mm -Machine enclosure -Coolant system -Documentation Dimensions: L x W x H 1.3 x 0.8 x 1.8 meters / Weight approx. 800kg Subject to errors and omissions.

Condition: used, Year of construction: 1980, workpiece diameter 600 mm workpiece weight 400 kg workpiece height 300 mm total power requirement 35 kW Gbjdpfx Amot Abrwj Asr weight of the machine ca. 4500 kg

Condition: good (used), Hard stone measuring plate Granite 2000 x 1000 x 250 mm Gedpfjzp I Tuox Am Aobr including stand

Condition: good (used), Year of construction: 1992, functionality: fully functional, Machine comes from a plant closure Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Gjdpfx Amjzimx As Aebr Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: ready for operation (used), Rotary table surface grinder ARTER A3 - 16 - Grinding diameter approx. 450mm - Grinding height approx. 220mm - Workpiece weight approx. 250kg - Automatic feed - Coolant system - Machine enclosure - Work light Dimensions: L x W x H 2.5 x 1.5 x 1.7 meters / Weight approx. 3500kg Gbsdpfozpfz Ajx Am Asr Errors and omissions excepted.

Condition: ready for operation (used), DELTA LC 400 – Rotary table grinding machine Gsdpfjznvcbsx Am Ajbr - Magnetic clamping plate (rotary table) 400 mm - Max. grinding diameter 400 mm - Grinding height (distance table - grinding wheel) approx. 230 mm - Spindle speed 2850 rpm - Fine feed 0.01 mm - Distance column - grinding wheel axis approx. 320 mm - Spindle motor 3 kW - Grinding wheel dimensions 200x80x78 mm - Lateral grinding wheel dressing device - Machine housing - Coolant system - Documentation Dimensions: L x W x H 1.2 x 0.8 x 1.8 meters / Weight approx. 700 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2011, DELTA LC 500 – Circular table grinding machine Gbjdszkvz Nepfx Am Ajr - CE marking - Year of manufacture 2011 - Magnetic table – Rotary table 500 mm - Max. grinding diameter 500 mm - Distance column – grinding spindle axis 315 mm - Grinding height max. magnetic clamping plate – grinding wheel 215 mm - Grinding spindle speed 2840 rpm - Fine adjustment via micrometer 0.01 mm - Coarse adjustment (height adjustment) motorized via keyboard - Spindle motor 3 kW - Dimensions of the grinding wheel 200x80x78 mm - Machine enclosure - Coolant system - Documentation Dimensions: L x W x H 1.3 x 0.8 x 1.8 meters / Weight 800 kg Errors and omissions excepted.

Condition: used, Professional granite surface plate – renowned quality by Mitutoyo / Planolith (Made in Germany). Ideal for use in quality control, tool shops, and metrology. ⸻ Specifications: • Plate dimensions: approx. 1200 x 800 mm • Thickness: approx. 170 mm • Weight: approx. 460 kg • Accuracy class: DIN 876/0 (high precision) • Permissible deviation: 0.009 mm • Actual deviation: 0.00273 mm • Manufacturer: Planolith GmbH / Mitutoyo • Country of manufacture: Germany • Includes: solid steel stand ⸻ Advantages: Gbodpfx Amjyw Ubqo Asr Very high measurement accuracy Stable construction – heavy granite dampens vibrations Ideal for measurements, marking out, and component inspection Professional equipment Ready for use ⸻ Condition: Used item – shows normal signs of wear (scratches visible on the surface), but is fully functional and maintains its specification parameters.

Condition: repair required (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: 49299, rotary table diameter: 600 mm, grinding height: 400 mm, workpiece weight (max.): 300 kg, grinding diameter: 500 mm, workpiece diameter (max.): 500 mm, TECHNICAL DETAILS Workpiece diameter: 500 mm Workpiece weight: 300 kg Workpiece height: 400 mm Grinding diameter: 500 mm Grinding height: 400 mm Gbedoxr U T Tjpfx Am Asr Table load capacity: 300 kg Magnetic rotary table diameter: 600 mm Rotary table speed: 20–80 rpm Y-axis Max. feed rate: 300 mm/min Incremental position measurement system, rotary encoder, resolution: 0.001 mm Z-axis Max. automatic cross travel: 330 mm Cross feed: 4–1,500 mm/min, adjustable Incremental position measurement system, rotary encoder, resolution: 0.001 mm Grinding spindle taper: 60 mm Grinding wheel: 400 x 100 x 127 mm MACHINE DETAILS Total power requirement: 18 kW Grinding spindle drive: 10 kW Space requirement approx.: 2,500 x 2,700 x 2,800 mm Control cabinet dimensions (L x H x D): 1,600 x 2,200 x 500 mm EQUIPMENT Coolant system with paper band filter NK grinding program Electronic handwheel switchable for B-Y-Z axis Machine enclosure with manually operated sliding door for loading and unloading Note: The frequency converter for the grinding spindle is defective. An offer from ELB is available (costs € 3,712.50 + packaging and shipping).

Condition: new, Year of construction: 2026, Grinding area: 1000 x 450 mm, round table diameter: 1000 mm, grinding wheel: 400 x 100 x 127 mm, spindle power: 11 kW, including speed control, electro-permanent magnetic chuck diameter: 1000 mm with adhesive force control, automatic truing device mounted on the spindle head, including compensation of the truing amount, coolant system with paper band filter, user-friendly operation with Mitsubishi PLC control, alternatively SIEMENS 828 CNC control, new machine with 12 months warranty, highest precision at an unbeatable price/performance ratio. We can gladly carry out grinding tests on our showroom machine. We will handle the installation/training at your location, as well as provide service in the future. Financing/leasing is no problem; we will gladly provide a quote! Gbjdeh I Tz Sopfx Am Ajr

Condition: good (used), Year of construction: 2003, ELB Rotary 40 NC-K rotary table surface grinding machine, table diameter 400 mm, grinding height 300 mm, year of manufacture 2003, ELN NC-K control, spindle power 4 kW, grinding wheel 300 x 50 x 76.2 mm, rotary table with magnetic chuck diameter 400 mm, full enclosure, coolant system with paper band filter, can be inspected under power, we are happy to take care of installation / training and subsequent on-site service! Financing/leasing is no problem, we are happy to provide an offer! Gedpfx Amjuiafus Aebr

Condition: refurbished (used), TECHNICAL SPECIFICATIONS Rotary table diameter: 600 mm Magnetic plate diameter: 600 mm Segment holder (or diamond grinding wheel) diameter: 430 mm Maximum grinding height: 400 mm Table rotation speed, continuously adjustable: 1-20 rpm Vertical automatic increments: 0.001 mm Spindle motor power: 37 kW Grinding spindle speed, continuously adjustable: 500-1000 rpm Maximum load on table: 900 kg Net machine weight: approx. 7500 kg Power supply: 400 V +/- 5% 3 Phases, 50 Hz Control circuit voltage = 24 V DC TECHNICAL DESCRIPTION • Frame and uprights made of electro-welded, thermally stabilized steel, with high rigidity and reinforcing ribs. Vertical movement of the spindle head • Precision linear slides • Vertical movements of the grinding wheel head via high-precision ball screws + YASKAWA brushless shaft motor • Vertical movements of the grinding wheel head via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel head, 0.001 mm resolution Transverse movement of the rotary table • Precision linear slides • Transverse movement of the rotary table via high-precision ball screws + YASKAWA brushless shaft motor. • Transverse table movements via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel headstock, 0.001 mm resolution. Spindle Motor • Coaxial spindle with drive motor • Balanced 37 kW spindle motor, without drive belt or coupling. • Frequency converter for continuously variable spindle speed and rapid braking of the spindle motor at the end of the cycle. Rotary Table • Cast iron rotary table with hydrostatic slides. • Drive via Siemens brushless motor • Continuously adjustable table speed from 1 to 20 rpm STANDARD EQUIPMENT Gjdpfxsx N I A Sj Am Asbr • Electropermanent magnetic chuck, 600 mm diameter with parallel poles, complete with electronic control and attraction force adjustment • Electronic handwheel for manual movement of the vertical and transverse axes. • LODI CNC Type T 2000 • Encoder-based measuring system for the vertical and transverse axes. Resolution = 0.001 mm • Automatic cycle with different feed rates for the various cycle phases: roughing, finishing, and sparking. • Cast iron rotary table with hydrostatic slides • Rotary table speed continuously adjustable by brushless motor • Frequency converter for continuous spindle speed adjustment and rapid spindle motor braking. • Coolant system with external collection tray. • External lubrication unit for automatic lubrication of all moving parts. • Complete segment holder (flange) with a set of segments + grinding wheel holder for diamond grinding wheel • Complete work area enclosure with sliding door • Work lights • Set of service wrenches • Documentation in French (1x printed, 1x on DVD) • CE Certificate Lubrication • External lubrication system for lubricating all moving parts. Watering System • Watering system including protective plates and hoses, including a settling tank outside the machine (without filter) Enclosure • Full enclosure with manually operated sliding door CNC Control LODI T2000 type CNC for managing and controlling the machine's axis movements. Automatic work cycle for grinding parts.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, TECHNICAL SPECIFICATIONS, MODEL RTR 600 CN Table diameter mm: 600 Electromagnetic chuck diameter mm: 600 Cross travel mm: 350 Max. grinding height with new grinding wheel mm: 400 Table speed, continuously adjustable rpm: 1-200 Gripping wheel dimensions mm: 400 x 50 x 127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power kW: 15 Max. load on table kg: 1,000 Net weight approx. kg: 5,200 Vertical movement is achieved on linear slides and is driven by a precision ball screw and a YASKAWA AC motor. Vertical axis resolution: 0.001 mm. Measuring system = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Transverse movement is performed on linear slides and is controlled by a precision ball screw and a YASKAWA AC motor. Transverse movement is performed by the grinding wheel head mounted on the cross slide. Transverse axis resolution = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Rotary table with hydrostatic circular slides. Infinitely variable rotation speed, with YASKAWA AC drive motor. Balanced hardened steel spindle with 15 kW motor. Fixed speed. Option: YASKAWA frequency converter for continuously variable spindle speed (1,100–1,900 rpm) Lubrication unit with automatic lubrication cycle, external to the machine, without initial filling. Standard accessories: - LODI CNC type T 2000 (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, flash grinding - Digital measurement of the vertical and transverse axes. Resolution = 0.001 mm - Electronic handwheel for manual axis movement - Continuously variable table speed via YASKAWA AC motor. Rotary table with hydrostatic slides - Grinding wheel headstock with 15 kW motor. Fixed spindle speed: 1,450 rpm. - Central lubrication for all moving parts - Hydraulic unit located outside the machine - Complete watering system with piping, electric pump, guards, electrical equipment, and a 250-liter settling tank (without filter) - Complete enclosure of the work area with sliding door (open ceiling) - 1 complete flange with grinding wheel Gbsdex N I Alspfx Am Ajr - Work light - 1 set of service wrenches - CE Declaration of Conformity + CE plate - Operating voltage 400 V +/- 5%, 50 Hz - Electro-permanent magnetic plate with electronic device for adjusting the attraction force. WAGNER brand, type EP 360 - Ø 600mm - YASKAWA frequency converter for continuous adjustment of the grinding wheel speed (1,100-1,900 rpm) and for braking at the end of the cycle - LOSMA paper filter, type DTE 100 (capacity 300 liters) - LOSMA wet fume extractor, type AS1 (capacity 1,300 m³/h) - "MARPOSS" dynamic grinding wheel balancing device for dynamic and automatic balancing of the rotating grinding wheel - Linear diamond holder mounted on the grinding wheel headstock. Automatic dressing cycle with automatic grinding wheel wear compensation. Diamond increment by AC motor. Resolution 0.001 mm - 1 Diamond - Complete auxiliary pump for washing parts and the magnetic platen

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 5010 € 96.69 € 100 kg 150 mm 150 mm 360 ° 120 kgm 230 / 50 V / Hz 0.25 kW 0.25 kW 0.1 - 3 U/min 30 s 350 mm M12x6 mm 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement Gsdpfox Urqwsx Am Aebr

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 24400 € 468.48 € 3000 kg 150 mm 150 mm 360 ° 135 kgm 400 / 50 V / Hz 1.1 kW 1.1 kW 1200 mm 700 - 950 mm The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. The frame is optimally designed for rotation and tilting operations. Godpox Urqdjfx Am Aobr The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer.

Condition: new, Year of construction: 2025, neu 2025 020157 prompt, Zwischenverkauf v Türkei 6320 € 121.98 € 1 250 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed Gedpfxsyq St Ne Am Asbr - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei Gsdeyq St Aopfx Am Aobr 11000 € 211.2 € 1000 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.55 kW 0.75 kW 0.1 - 3 U/min 60 s 1200 mm M20X6 mm 1000 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 7730 € 149.19 € 500 kg 150 mm 150 mm 360 kgm Gsdpfjyq Stvox Am Ajbr 230 / 50 V / Hz 0.37 kW 0.37 kW 0.1 - 3 U/min 45 s 800 mm M20X6 mm 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Year of construction: 1964, condition: used, -WKG 429- We are offering a grinding machine from Naxos Union. This is a vertical rotary table surface grinding machine with 2 vertical grinding spindle units. Technical data: Manufacturer: Naxos Union Type: FRDA 600/1000 Year of manufacture: 1964 Rotary table: Ø 1100mm Grinding wheel Ø: Shrink-fit arbor 475/254 Grinding wheel Ø: Plain arbor 457/357 Weight: 8t Grinding method: Segment grinding Gbodpfx Amsg Nt Dbo Aer Segment grinding heads: 2 pcs Accessories: Dressing device Water tank with paper band filter Marposs control

Condition: new, Year of construction: 2025, neu 2025 020156 prompt, Zwischenverkauf v Türkei 6720 € 129.7 € 1 250 kg 205 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW Gbodox Urqkepfx Am Aor 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm 1000 mm 700 mm 1700 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) INCL. FOLLOWING OPTION: Pneumatic centering attachement

Year of construction: 1994, condition: used, workpiece diameter 350 mm workpiece weight 99999 kg workpiece height 240 mm total power requirement 7,5 kW weight of the machine ca. 2 t Seltene Gelegenheit: Teilüberholte Hochpräzisions-Rundtischflachschleifmaschine Mit komplett neuem Schaltschrank und neuer Steuerung mit BEMA Schleifsoftware Rundtisch-Durchmesser 380mm Magnet-Durchmesser 350mm Schleifscheibenabmaße 300x25x76,2mm Tischdrehzahl variabel max. 200U/min Schwenkwinkel des Tisches +-3 Grad Schleifspindeldrehzahl 800-4200 U/min Leistung Schleifspindelantrieb 5KW Verfahrweg quer max. 225mm Verfahrweg vertikal max. 480mm Abstand zwischen Magnetspannfutter und Spindelmitte, max. 390mm Automatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifscheibe im CD-Abrichtverfahren (Abrichten während des Schleifprozesses) Hierdurch werden Schleifzeiten reduziert und Abrichtzeiten eingespart. Der Abrichtbetrag wird automatisch kompensiert. Automatische Antasteinrichtung AT-R: bietet die Möglichkeit, mit der Schleifscheibe das Werkstück schnell und automatisch anzufahren. CNC-Steuerung mit höchstem Programmierkomfort Unterschiedliche Schleifprogramme für -Pendelschleifen -Kurzhubschleifen -Einstechschleifen -jeweils eine oder mehrere Flächen in gleicher oder unterschiedlicher Höhe Gjdpfexbtl Tsx Am Aobr Ins Schleifprogramm integrierte Abrichtzyklen -Tischabrichten mit Einzeldiamant -Automatisch Geradabrichten -CD-Abrichten mit AF65 Minizyklen: -automatisches Antasten an das Werkstück -Positionieren einzelner Achsen -Abrichten Einsatzgebiet: Hochgenaue Planschleifarbeiten in der Mittel- und Großserienproduktion bzw. Einzelteilfertigung in zentrischer Aufspannung

Year of construction: 2015, condition: used, workpiece diameter 300 mm workpiece weight 999 kg workpiece height 145 mm Features: -Digital display vertical axis -Automatic feed -Programmable automatic end stop -Grinding spindle drive with infinitely variable electronic speed control -Infinitely variable cross feed and table rotation -24V magnetic clamping plate 300 mm -Various occupational safety devices, e.g. protective cover monitoring, operating status display via traffic light -Lubricating oil level monitoring -The machine was completely overhauled in 2015, at which time the entire electrical system was replaced with PLC control and 24V control voltage -Paper belt filter system specially designed for this machine Gjdpfx Ajxflcljm Ajbr The following work has now been carried out: -Replacement of bellows and belts -New bearings for grinding spindle -Grinding carriage bed and rotary table bed scraped by hand to restore better and more precise running characteristics -Grinding carriage and cross table lifted from machine body and all tracks cleaned, lubrication checked -Various wear parts, such as rubber caps and switching elements, replaced -Detailed functional check -Modernisation of feed arm -Paint touch-up work, machine colour: light grey RAL 7035 and RAL 7012

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4304, rotary table diameter: 600 mm, grinding height: 450 mm, overall weight: 14,500 kg, Machine is equipped with 3 spindles, surface grinding, external grinding, bore grinding Turret head B-axis with 1° division Belt filter system included Gbodpfxevt A Rto Am Aer

Year of construction: 2023, condition: excellent (used), 2023 Vixen Surface Treatments 2 Stage FL250 Industrial Parts Washer Front Pneumatic Vertical Loading Door Dimension W2,690 x H1,910mm. Voltage 400V. S/No. 3177 (2023). Please note a loading charge of £50 + VAT to be added to buyer's invoice. Gbodpjzt R E Uefx Am Ajr With Extractor Fan, Pumps, Filtration, Signal Tower, Loading Trolley, Staging & Wash Gun. Overall Dimensions W3,300 x D4,440 x H2,800mm.

Condition: good (used), Table size:1500x1500mm Capacity : 6t Gedofvqmxspfx Am Aobr Dimension: 1600x2500x2000mm Hydraulic