Used Surface Table for sale (47,396)

Condition: excellent (used), Catalogue number 7797 TECHNICAL DATA Djdpfx Ahsxt Ii Re Uekw - Shaft width: 510 mm - Number of knives: 3 pcs - Table length: 2520 mm - Brake - Cast iron tables - Both tables adjustable - Original angle-adjustable fence - Motor: 4 kW - Extraction port diameter: 160 mm - Dimensions (L/W/H): 2520x870x950 mm - Weight: 672 kg ADVANTAGES – Polish production – 3-knife cutterhead – Brake – Used jointer, in very good condition Net price: 7,500 PLN Net price: 1,790 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: used, • Gluing table with two lamps • Dimensions: L 1.89 m x W 1.0 m x H 0.90 m • Price on request Djdpsxt Iqnofx Ah Ujkw

Condition: good (used), Year of construction: 2022, functionality: fully functional, total height: 970 mm, total width: 3,400 mm, Work tables AT 3400, mobile Stainless steel worktop with rear gallery Drawer unit on the right 2 stainless steel flour trolleys 8 ingredient containers on the left with stainless steel lid Dsdpewyrw Ijfx Ah Uekw Used device, cleaned Dimensions: 3400 x 800 x 970 mm (W x D x H) Option: Delivery service Many more tables in stock!

Condition: used, SincoTec Model: POWER SWING 100 MOT Big Table The SincoTec POWER SWING 100 MOT is a high-performance resonance test bench designed for fatigue testing of materials and components. This system enables dynamic load testing with high forces (up to ±100 kN) while ensuring precise control. Typical applications include lifetime testing, fatigue strength testing, and component validation under realistic conditions. With its robust construction, precise sensors, and stable granite table, the test bench is ideally suited for research, development, and quality control in both industrial and academic settings. Notes: The resonance test bench is particularly well-suited for material and component testing under dynamic loads. Technical Data: General Data – Test Bench: - Overall height: 1215 mm (without clamping fixture) - Width: 2005 mm - Depth: 1205 mm - Maximum force amplitude: 50 kN - Maximum total force: ±100 kN - Sensor accuracy: at least class 1 (according to DIN EN 10002-3) Control Cabinet: - Overall height: approx. 1800 mm - Table height: 1080 mm - Width: 650 mm (narrow tabletop) / 1420 mm (wide tabletop) - Depth: 700 mm - Weight: 180 kg (with granite tabletop approx. 240 kg) - Color: RAL 9006 (white aluminum), tabletop midnight Installation Requirements: Dkodpfx Ahsxrlkve Usw - Required space: 4.3 × 3.0 m - Minimum ceiling height: 2.5 m - Floor load capacity: 2.0 t/m² - Power supply: 400 V / 50 Hz (three-phase, clockwise rotation) - Connection: 5-pin CEE socket, 16 A - Fuse protection: 16 A - Weight: approx. 3.6 t Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data; all information provided without guarantee!) If you have any further questions, please do not hesitate to contact us by phone.

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Equipment and technical data: - Motor power: 3 kW - Spindle speed: 5,000 rpm - Spindle diameter: 120 mm - Number of knives: 4 - Feed speed: 8 + 14 m/min - Maximum planing height: 230 mm - Extraction port: Ø 150 mm - Jointer: - Two-piece folding table, synchronized on both sides - Table height adjustment: via double universal driveshafts, handwheel with scale display - Fence: tiltable, tilt angle with magnifier display Dedpfx Ahexr R T Ao Ujkw - Thicknesser: - With outfeed roller, spring-mounted - Feed rollers driven synchronously Dimensions (jointer tables): 2,040 × 410 mm Weight: 560 kg Availability: short-term Location: Röllbach

Condition: used, Repair-needing Wide Belt Sander, Surface Grinding Machine, Sheet Metal Deburring Machine, Deburring Machine with 4 Processing Stations Sanding Unit and Brushing Deburring Unit Manufacturer: BÜTFERING - STEELMASTER Type: Frima-V/413RRTT Machine No.: 76 931 Year of Manufacture: 2002 2x Brushing Deburring Units + 2x Sanding Units Max. working width: 1350 mm Conveyor belt width: 1370 mm (heavily worn on the sides) Working thickness: 0.3 mm to 150 mm Sanding Units Abrasive belt dimensions: 1350 mm x length ?? mm Abrasive belt motor (1): 11 kW (speed 2930 rpm) Abrasive belt motor (2): 12.5 - 16 kW (speed 1470 - 2950 rpm) - Abrasive belt speed (belt 1): only at high speed - Abrasive belt speed (belt 2): 2 speed settings - Pneumatic belt tensioning Brushing Deburring Units with multiple vertical sanding discs and oscillation 2 roller brushes Ø 250 mm Roller width: 900 mm Brush speed: approx. 1440 rpm Deburr brush motor (3): 7.6 - 9.5 kW Deburr brush motor (4): 7.6 - 9.5 kW - Sanding disc speed (3): 2 speed settings - Sanding disc speed (4): 2 speed settings - Oscillating movement of brush rollers via gear motors - 2 separate drive motors, one for each brushing station Conveyor Feed Unit Djdpfx Aew Ed Uvsh Uskw Conveyor motor power: 0.75 kW - Infinitely variable conveyor speed via frequency converter - Motor-driven height adjustment for material thickness 0.3 - 150 mm Power supply: 400 Volt, 50 Hz, 55 kW Machine footprint: Length 300 x Width 270 x Height 210 cm Required space for transport: Length 600 x Width 242 x Height 210 cm Weight: approx. 5.5 tons The machine was operated with wet grinding; belt filtration system integrated in the machine frame The machine is in poor condition, was taken out of production, and stored under tarpaulin for approx. 5 months. Technically, everything still appears to be in reasonable shape, but improper storage has led to some rust formation. The machine requires refurbishment.

Condition: excellent (used), HOLZKRAFT T55es Spindle Moulder - used - Tilting spindle, fine-adjustable fence, right/left rotation, power socket for feed unit ----- Technical Data ----- Tilting range: 0–45°, table size: 1,080 x 655 mm, spindle diameter: 30 mm, Dedpfxexrndlj Ah Uekw usable spindle length: 125 mm, max. cutter diameter: 240 mm, speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm, motor: 5 kW, extraction port diameter: 120 mm, lower extraction port diameter: 120 mm, dimensions (LxWxH): 1,200 x 855 x 1,260 mm, weight: 423 kg Quality Information: - Spindle run-out accuracy checked - Brake checked - complete basic inspection performed - complete basic cleaning performed - electrics checked - ready for immediate use

Condition: used, • Length = 2100 mm • Width = min. 1100 mm, max. 1850 mm • Height = 1000 mm • Price on request Dkjdsxt Dx Ijpfx Ah Ujw

Year of construction: 2022, condition: excellent (used), Work table, baker's table Stainless steel worktop with rear upstand Reinforced welded construction Lower storage shelf Stainless steel design Approx. dimensions: 1880 x 800 x 890 mm, W x D x H Used device, cleaned Dkedpfx Ahswv E Nvs Uew We have more tables in stock!

Condition: used, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer Service Performed General Information: For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance carried out regularly by the manufacturer. Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance included - Ideal for research, testing, and development applications Technical Data – Test Bench Feature / Value - Overall height of test bench: 1215 mm (without clamping device) - Width of test bench: 2005 mm - Depth of test bench: 1205 mm - Maximum force amplitude: 10 kN - Maximum total force: ±20 kN - Measurement transducer accuracy: min. Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Feature / Value - Overall height of control cabinet: approx. 1800 mm - Table top height: 1080 mm - Width of control cabinet: 650 mm (narrow table top) / 1450 mm (wide table top) - Depth of control cabinet: 700 mm (narrow table top) / 800 mm (wide table top) - Weight: 152 kg (small table top) 187 kg (large table top); with granite plate: 247 kg Site Requirements Feature / Value - Required space: 4.3 × 3.0 m - Required ceiling height: 2.5 m - Floor load capacity: 234 N/cm² Power Requirements Feature / Value - Voltage: 400 V three-phase AC with neutral and protective earth - Phase rotation: clockwise sequence - Voltage fluctuation: ≤ ±10 % Djdpfx Aoxrffaeh Uokw - Short voltage dips: < 20 ms - Limits for continuous interference: interference class A according to VDE 0871 - Frequency: 50 Hz ± 1 % - Protective earth / ground resistance: < 0.3 Ω Connection and Fusing Feature / Value - Power supply: 400 V / 50 Hz (clockwise phase sequence) - Connector: CEE plug, 5-pin, 16 A - Fuse rating: 16 A Test bench weight: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical specifications!) Further questions can be answered by phone.

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration Dksdpfx Ahowugczj Uow 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, Year of construction: 1995, grinding length: 600 mm, grinding width: 350 mm, controller manufacturer: SIEMENS, controller model: S5 95U, CONTROLS .. SIEMENS S5 95U WORKING RANGE SURFACE GRINDING .. grinding length: 600 mm .. grinding width: 350 mm .. distance of axis of horizontal spindle - clamping surface (max.): 525 mm .. workpiece height (max) with largest wheel: 375 mm TABLE (SURFACE GRINDING) .. workpiece load (max): 400 kg MAGNETIC TABLE .. length: 600 mm .. width: 350 mm Dkedpoxtiwpsfx Ah Uew SPINDLESTOCK GRINDING SPINDLE .. X-axis travel: 660 mm .. Y-axis travel: 350 mm .. Z-axis travel: 385 mm .. drive power: 4.5 kW GRINDING TOOL .. type of grinding tool: wheel .. diameter (max): 300 mm .. borehole: diameter: 76.2 mm .. width: 50 mm AXIS DRIVES .. traverse velocity X (min): 2000 mm/min .. traverse velocity X (max): 28000 mm/min ELECTRICAL SPECIFICATIONS .. total power consumption: 8 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 2100 kg ATTACHMENTS (GRINDING) .. Flange of grinding wheel: yes .. Grinding discs, number: 1 .. balancing attachment: yes .. coolant unit: yes

Condition: used, Year of construction: 1988, control Heidenhain 355 Dkodpef Tdvbefx Ah Uew tool adaptor SK50 weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1990, 1000 x 600 mm magnetic plate size 1000 x 600 mm grinding height max 400 mm grinding wheel width x diameter 400 x 60 x 127 mm dimensions 3900 x 20 50 x 2400 m ja Dksdpjvanvujfx Ah Uew weight of the machine ca. 6 t

Condition: used, Year of construction: 1954, x-travel 600 mm ja Dedevu Hl Dspfx Ah Uekw

Condition: used, Year of construction: 1954, grinding length 600 mm grinding width 205 mm Djdpjvu Hkysfx Ah Uekw x-travel 600 mm ja

Condition: used, Year of construction: 1999, magnetic clamping plate 1400 - 700 mm Djdpfevu Hlqox Ah Ujkw weight of the machine ca. 6 t

Condition: used, Year of construction: 1987, 300 - 1400 weight 5 t Dedpjwhqzbsfx Ah Uokw cooling ja

Condition: used, Year of construction: 2000, grinding length 600 mm grinding width 300 mm magnetic clamping plate 600x200 mm Dkedjw Syizepfx Ah Ujw wheel diameter 220-300 mm machine weight ab. 2200 kg serial number 245

Condition: used, Year of construction: 1970, Year ca. 1970 magnetic plate size 520 x 200 mm weight of the machine ca. 1,4 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Dksdpfjirazpsx Ah Ujw

Condition: used, Year of construction: 1990, table load max. 40 t t with manual operation panel ja weight of the machine ca. 22 t 1918 Year ca. 1990 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Dsdpfxjhy T Nvo Ah Uskw Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1991, working area 225 mm table-size L:550 mm table-size B:200 mm sanding disc diameter 200mm mm Dkodpfxsud Alge Ah Uew magnetic plate size 500 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 2000x1600x2100 m

Condition: used, Year of construction: 1990, x-travel 1600 mm ja weight of the machine ca. 13,7 t Dkjdpswlvtdjfx Ah Uow

Condition: used, Dreh- und kippbar für Schweißpistole oder für Plasma condition nicht geprüft +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Dedpfx Aheidv Ere Uokw

Condition: used, Year of construction: 1966, table diameter 44 mm table load . t table height . mm total power requirement . kW Dksdpfoud Trqex Ah Uow weight of the machine ca. . t dimensions of the machine ca. . m