Used Treatment for sale (803)

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. Credpjxqzmkefx Ah Uoi The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: used, Year of construction: 1996, functionality: fully functional, Industrial bag sealing and closing device consisting of two unites: 1) polyethylene bag sealing machine Manufacturer - Bag Treatment Holland BV, Netherlands (former company name) Year of manufacture - 1996 Model BTH SLS-350 Designed for heat-sealing of polyethylene bags or polyethylene inner liners in paper bags. Sealing the liner ensures its tightness, which helps to prevent the moisture penetration into the finished product. Bag height, temperature and sealing time are adjustable. The machine is fully equipped, in good condition, is technically efficient. Manual instruction and a wiring diagram (in Dutch/German) are included. 2) bag closing unit for closing (sewing) of the paper bags. Manufacturer - Fischbein S.A, Belgium Year of manufacture - 1995 Model - 91 Intended for final closing, i. e. sewing, of the paper bags with open top. For more reliable tightness of the packaging, a crepe paper tape in the same colour as the bag may be used additionally. Csdpfjxlcm Iox Ah Usri Manual instruction and a wiring diagram are included. The device is characterized by high efficiency combined with easy and simple operation.

Condition: used, functionality: fully functional, Specific information see in passport included. Price on request. The demineralization plant was used to treat raw water in basically four technological steps: - Water pretreatment - preheating, clarification and filtration, - Water demineralisation is a chemical treatment in which all minerals, i.e. dissolved salts, are removed from raw (river) water. The resulting treated water is then virtually chemically pure H2O, containing only dissolved gases - oxygen, nitrogen and noble gases (carbon dioxide is removed), - Water softening stations for water treatment hot water circuits - Thermal degassing of water The demi-station technology also includes auxiliary equipment for chemical storage (storage tanks, bottling equipment ...), waste water removal (sumps, tanks ...), media transport (pumps, pipelines, storage and dilution tanks ...). Csdpewwtp Tefx Ah Usri

Year of construction: 2020, condition: used, Climate Room with Air Treatment System. Steel Structure, 80mm sandwich panel walls, Overall dimensions approx 28.5 x 10.5 x 4.0 (5.5)m, Wolf pre-air treatment unit 6.800m3/hr, Csdpfx Ahext E Dxo Uori Wolf main air treatment unit 17.000m3/hr. Please note: Drawing and Air Treatments units specs are available upon request

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2024, inner dimension height: 2,200 mm, inner dimension width: 1,150 mm, total height: 2,500 mm, total length: 4,800 mm, total width: 1,270 mm, type of input current: three-phase, overall weight: 610 kg, input current: 16 A, control voltage: 24 V, Fully automatic lye application process Riehle Model: Comjet with 1 trolley unwinder 580x980 Capacity up to approx. 240 trays/hour 180-liter extendable lye tank Triple intensive lye curtain Suitable for tray sizes 580 x 780 & 580 x 980 mm High pump performance with dual filter Crodpewmvzkjfx Ah Uji With salter Stainless steel construction Connection: 400V, 8 kW, 10A, 32A-CEE plug Dimensions approx. 1270 x 4800 x 2500 mm (W x D x H) Pre-owned machine, cleaned Options: Truck delivery Training & commissioning Service package Maintenance contract Many more bakery machines in stock!

Condition: like new (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 3,000 mm, total width: 2,400 mm, total length: 6,000 mm, energy consumption: 35 kWh, Equipment: documentation/manual, Vacuum Evaporator – 57,000 L/Day | Industrial Wastewater and Process Water Treatment General Description The vacuum evaporator offered here (57,000 L/day) originates from a project for the treatment of process water and fermentation residues in a biogas producer consortium in southern France. The plant was fully installed but never commissioned and is in as-new, factory-preserved condition. It is immediately available. The evaporator is designed as a thermally efficient vacuum system and serves for the volume reduction, concentration, and recovery of water-containing liquid wastes. In combination with downstream reverse osmosis, it is ideal for applications requiring both clean distillate and highly concentrated nutrient or brine solutions. Technical Data (Evaporator 57,000) Type: Vacuum evaporator, thermally heated Manufacturer: Blue Water Plant Year of manufacture: 2020 Capacity: 57,000 L/day (approx. 2,400 L/h) Operating pressure: < 0.2 bar (vacuum mode) Heating medium: Hot water / steam Material: Stainless steel AISI 316 / 304 Control system: Siemens S7-1200 PLC with touch panel Energy consumption: approx. 45–55 kWh/m³ (depending on feed water) Condition: As new, factory preserved, unused Fields of Application • Biogas and digestate treatment – recovery of nitrogen concentrates • Landfill leachate treatment – reduction of wastewater volume • Chemical & pharmaceutical industry – process water treatment • Food industry – cleaning and reuse of rinse and process water • ZLD systems (Zero Liquid Discharge) – final stage concentrate evaporation Advantages • High thermal efficiency through vacuum operation • Robust stainless steel construction (AISI 316) for aggressive media • Fully automatic control (Siemens S7 + touch HMI) • Low maintenance, long-life components • Ideally compatible with RO systems (double pass integration) • Immediately available – optional refurbishment, acceptance testing & 1-year warranty Special Features • System was part of an integrated plant with SIMPEC RO 8000 44 8 • Never in operation, fully documented and preserved • Location: Southern France (dismantling & transport by RIEFILT GmbH can be arranged) Price & Scope of Delivery Csdjwnbxdepfx Ah Uori Price: On request Scope of supply: Evaporator 57,000 + control system + documentation Optional: Refurbishment / Factory acceptance / 1-year warranty RIEFILT GmbH – Industrial Water Solutions

Condition: new, Year of construction: 2019, operating hours: 0 h, machine/vehicle number: 20928, Burkhalter water treatment plant (state of the art, Swiss top quality) - Brand new (the unit has never been installed) - Please consult the attached PDF catalog: There you will find a detailed description of the plant as well as an extensive photo gallery (starting on page 8). Crodpfsp Hf Idjx Ah Uji

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Csdpfx Aewmm U Ush Uori

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Manufacturer: ProMinent Model: CDLb 6 Bello Zon Year of manufacture: 2015 Capacity: 6 g/h chlorine dioxide Condition: very good, fully functional The ProMinent CDLb 6 is a compact and efficient system for the generation and dosing of chlorine dioxide, manufactured by ProMinent GmbH in Heidelberg, Germany. Designed for safe and efficient disinfection, it is used in numerous fields of water treatment – particularly in the food and beverage industry (e.g., dairies), process water systems, and cooling circuits. The system operates according to the acid-chlorite process in batch mode, generating a stable, buffered chlorine dioxide solution with high dosing accuracy. The reaction between sodium chlorite and hydrochloric acid takes place in a closed reaction chamber, so no gaseous chlorine dioxide emissions are released and a high level of safety is ensured. Output is 6 grams per hour, making it ideal for applications with medium disinfection requirements. Cjdpfexapvfsx Ah Ueri

Year of construction: 1988, condition: excellent (used), functionality: fully functional, 250 kg/h Capacity Gas Heated Aichelin Heat Treatment Line Fully functinal Cedpfxexqy U He Ah Usri Still in operation Line Consisted With : Loading - Gas Heated Hardening Furnace (1988)- Oil Tank - Rare Washing Machine - Loading Unit For Tempering - Electrically Heated Tempering Furnace (20xx) - Blackning Tank - Dryer Protection Gas : Nitrogen / Methanol

Condition: new, Timber driers any capacity, own technology, more than 70 years experience. More than 500 machines all over the world. Cedpjk D S Npsfx Ah Uori Machines for treatment ISMP-15.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 75 bar, total height: 2,250 mm, total width: 2,200 mm, total length: 7,000 mm, temperature: 40 °C, noise level: 87 dB, Equipment: documentation/manual, rotational speed infinitely variable, Technical Brief Description Industrial Water Treatment System – SIMPEC RO Double Pass 8000 44 8 The system is a fully automatic, two-stage reverse osmosis unit designed for industrial applications with a high demand for purified water. It has been developed for process water recycling, landfill leachate treatment, biogas and agricultural operations, as well as the food and chemical industries. The system is pre-assembled on a stainless steel skid and includes all essential components for water treatment, including chemical dosing, filtration, high-pressure pumps, and automation. Main Features - Two RO stages (36 + 8 membranes) - Pre-filtration with multimedia and cartridge filter - Automatic pH adjustment (acid/alkali) - Dosing unit with 3 dosing pumps - Siemens S7 control system with TP700 HMI - Integrated CIP cleaning - Fully piped and wired (Plug & Play) - Premium materials (AISI 304 / 316, FRP) - Pressure sensors, conductivity probes, flow meters ⚙️ Process Description Crodsw Uf Ihopfx Ah Usi Feed & Pre-filtration Raw water is conveyed via a stainless steel pump into a multimedia filter (MMF) to remove suspended solids. Fine filtration is then performed using cartridge filters. First RO Stage (High Pressure) The pretreated water is fed by a 44 kW high-pressure pump into six RO pressure vessels with a total of 36 membranes. Result: Permeate with < 1000 µS/cm conductivity. Second RO Stage (Polishing) The permeate from stage 1 is further treated in two RO vessels (8 membranes). Result: Ultrapure water with conductivity < 100 µS/cm. Chemical Dosing Three dosing pumps regulate: - Antiscalant / Acid in the feed - NaOH for concentrate pH correction Automatic Control All operating parameters (pressure, conductivity, flow, pH, temperature) are monitored by sensors and displayed on the Siemens HMI. The system operates fully automatically with start/stop cycle and alarm management. 🌍 Typical Application Areas - Biogas and agricultural operations (digestate and wash water) - Landfill leachate treatment - Process water recycling in industrial plants - Food and beverage industry - Pretreatment for evaporators/distillation units 🧪 Technical Highlights - High water recovery (up to 90%) - Low operating costs due to energy-efficient pumps - Robust and low maintenance - CE-compliant, IP55 protection class - Low noise design (< 87 dB(A)) 📦 Scope of Delivery - Complete RO skid with two RO stages - Control unit (Siemens S7 + HMI) - High-pressure pumps (Grundfos) - 3 chemical dosing stations - Pre-filter unit (MMF + CF) - CIP system - Documentation & circuit diagrams 💡 Optional Additions - Evaporator modules (Zero Liquid Discharge) – optionally available - Pre-filtration (DAF, sand filter, UF) - Replacement membranes / service package - Worldwide installation + commissioning

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 retort heat treatment furnace - As good as new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts incl. TECHNICAL DATA Plant type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour. Working temperature: ≤ 1100 °C , ≤ 1050 °C in vacuum. Control constancy: ± 2 K Temperature homogeneity: ± 6 K in the range from 600 °C to 1150 °C at the end of the settling period Control voltage: 230 VAC / 24 VDC Working space furnace: 360 x 400 mm Loading: ≤ 50 kg Heating: three-zone Pressure: ≤ 350 mbar Final pressure vacuum when cold: < 5 * 10-5 mbar with clean, dry furnace. Installation area: 900 x 1900 x 3000 mm Credpfx Aeiryyash Uei Total plant weight approx.: 1500 kg Sound pressure level: < 70 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Condition: good (used), Wastewater treatment plant, drilling water treatment, chip separator, paper filter, paper belt filter -Tank dimensions: 1000/700/H800 mm -Agitator: 0.75 kW -Speed: 1500 rpm -Equipment: as shown in the pictures, conveyor belt filter/agitator -Dimensions: 1100/710/H1650 mm Cjdpfx Ahjb A Ngpe Usri -Weight: 130 kg

Condition: ready for operation (used), ProMinent® DULCOMETER® D1Cb Controller with complete system and alarm as per pictures attached. Credpor H Ikasfx Ah Uji Precisely monitor or control process variables, including free and total chlorine, fluoride, chloride dioxide, chlorite, hydrogen peroxide, peracetic acid, and ozone. Amperometric technology provides real time, on-line measurement without reagents or buffer solutions. Features programmable analog output, 4-20mA connection and output, alarm and relay proportional control, temperature correcting values, and standard pre-designed system packages. Wall mount.

Year of construction: 1991, condition: excellent (used), functionality: fully functional, 250kg/h Capacity Gas Heated Kohnle Heat Treatment Line Fully functinal Still in operation Line Consisted With : Loading - Gas Heated Hardening Furnace (1991)- Oil Tank - Rare Washing Machine - Loading Unit For Tempering - Electrically Heated Tempering Furnace (Industrial Ofenbau 2007) - Blackning Tank Cedpfx Aexqy Itoh Ujri Protection Gas : Nitrogen / Methanol

Condition: new, Year of construction: 2025, functionality: fully functional, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Scope of delivery: 1. chemical pre-treatment by spraying (in cycle process) 2. dryer 3. powder coating system Crsdoulwg Nopfx Ah Uoi 4. single powder oven 5. conveyor technology, semi-automatic 6. electrical control system Hall/ floor space Floor area of the system max. 12,000 x 6,500 mm Hall floor Industrial floor Workpiece sizes Max. Part dimensions L= 500mm, H= 1,500mm, W= 500mm Range of steel parts Conveyor technology P&F chain conveyor in cycle mode, semi-automatic Pre-treatment Chemical Power supply Electricity On-site power (max. 88 kW) Gas On-site power Compressed air On-site power Water On-site power Calculation Type of system Cycle system Conveying speed 3.2 meters / min Length per cycle L = 1,600 mm Time for cycle movement: Tm = 1.6 meters : 3.2 meters/min = 0.5 minute Time for cycle standstill: Ts = 8.5-12 minutes Total time for cycle Tt = Tm + Ts = 9-12.5 min Electrical energy: Total power 88 kW min. Average consumption 60 kWh max. average consumption 70 kWh

Year of construction: 1999, condition: good (used), For sale is a water treatment plant of make ENVOTECH and type 0320 from 1999. In 2016 a new reaction tank of the brand Leiblein, made of stainless steel, with the dimensions of 500*500*400 mm was added. The plant is fully functional and the contact details of the competent service technician are available and can be forwarded at the time of purchase. Technical data & information: - Executed in stainless steel - Including oil separation by coalescence principle - Including automatic cleaning - Built-in pump for waste water, concentrate and distillate - Frequency control of the compressor motor - Type: 0320 - Rated capacity l/h: 320 Energy consumption - In operation: 25 kW - Maximum power: 35 kW Supply voltage: 3*400 V - 50 Hz Dimensions lxwxh: 245x155x265 Face: ca 2600 kg Sound pressure level: 75 dB All data refer to operation with water Cedpfx Aopl Tqteh Ueri On request, loading and shipping can be organized throughout Europe. Prices plus VAT Viewing by appointment possible. Contact us, our team is happy to help you. Ch3mj0l3eg Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: excellent (used), Plant is for mixing clayey soils Crodpfx Aotrmvfsh Uoi Chain conveyor 800 x 7,000 mm with feed hopper, electric drive and adjustable gearbox 2-shaft compulsory mixer HÄNDLE approx. 900 x 3,500 mm, with electric drive and gearbox both on semi-mobile steel construction with electric installation

Year of construction: 2015, condition: used, Waste water neutralisation Capacity: 8 m3/h Operation / Control: Control cabinet with touch-screen display / WAGO Crodpfexbqr Dex Ah Uei Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet

Condition: used, Year of construction: 2017, controller model: , _____ Description: Year of manuf. : 2017 Material thickness : 100 mm Material size : 1350 mm Working area Maximum clear passage width:1350 mm Sheet thickness range:0.3 to 100 mm Stepless adjustable feed speed:0.5 to 10 m/min :Electric sheet thickness adjustment :Electric tool positioning Power supply Operating Voltage:Three-phase 400 V with neutral and protective earth (3 x 400 V/N/PE) Frequency:50 Hz Credpfx Asw Ubt Hoh Uoi Power Consumption:36 kW Supply Line Fuse:63 A Supply Cable Cross-Section:16 mm² Control Voltage:24 V DC Short-Circuit Current Rating:10 kA Machine Weight:approx. 3,500 kg Dimensions (W/D/H):approx. 2,120 x 3,093 x 2,400 mm Aggregates / Units / Stations Contact Roller Unit:Adjustable working speed from 3 to 18 m/s Multi-Rotation Brush R2:Equipped with 3 brush heads, each with 2 brushes Conveyor Belt Cleaning:Dry cleaning system Vacuum System:Integrated vacuum with a 5.5 kW blower Workpiece Thickness Measurement:Automatic height detection Extraction System:No extraction unit included

Year of construction: 1989, condition: good (used), functionality: fully functional, 300kg/h Capacity Electrically Heated Kohnle Heat Treatment Line Fully functinal Still in operation Line Consisted With : Loading - Electrically Hardening Furnace (1989)- Oil Tank - Rare Washing Machine - WMA Loading Unit For Tempering - Gas Heated Tempering Furnace (Industrial Ofenbau 2007) Crodpfoxqy Dujx Ah Uji Protection Gas : Nitrogen / Methanol

Condition: excellent (used), the plant is consisting of: Cedpolxzl Eofx Ah Uori - 2 chain separators - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, - 5 conveyor belts - 2 double-shaft extruders connected in parallel - 1 double shaft mixers - container for liquid extracts, etc.

Condition: used, Year of construction: 1998, Additional title: reverse osmosis plant Capacity: 6 m³/h Length: 3,7 m Width: 0,85 m Height: 2,1 m Cjdpfsw U A Urjx Ah Usri Weight: 1000 kg Features: Reverse osmosis system, scale saturation tank, permeate tank, HMP dosing, milk of lime preparation station, various pumps, valves and measuring probes

Condition: used, Year of construction: 2007, Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpressurised 500 l permeate tank has an adjustable level control. For treatment with ozone, the water in the permeate tank is circulated via an adjustable ozone feed point. The ozone is generated from air in the ozone generation system by means of a silent electrical discharge and is available as an ozone-air mixture. The air and the undissolved ozone rise upwards in the permeate tank and are discharged via the residual ozone destroyer. A redox potential and ozone measurement is carried out after the centrifugal pump for monitoring purposes. The ozone dosage is set via the touch panel. You can choose between regulation via the redox potential or the ozone concentration. Additional title: Water softening, reverse osmosis system, ozone sterilisation Permeate output: 600 l/h Concentrate output: 200 l/h Ozone output: 5 g/h Max. working pressure: 16 bar Current: 2 A Voltage: 230 V Frequency: 50 Hz Water: < 5 bar (cooling water) Csdow Uvdgjpfx Ah Uori Compressed air: 5,5 - 6,5 bar (max. 10 bar); max. 0,37 Nm³/h Operation / Control: Simatic S7-300, Touch Panel Position: free standing Base construction: Fully mounted on tubular frame with spherical feet Features: Reverse osmosis unit, reaction tank complete with residual ozone destroyer, ozone generator, ozone gas warning device, ozone and redox sensor, switch cabinets with control unit