Used Distillation for sale (53)

Condition: good (used), Year of construction: 2007, power: 9.1 kW (12.37 HP), Manufacturer: Ilsa Multimatic Type: Topline 320 Designation: Cleaning machine Distillation module: VD160 Tank volume: 320 L Spin speed: 550 rpm Power: 9.1 kW Dwsdpfxsw I Ddhs Apwja Year of manufacture: 2007

Condition: good (used), Pharmatec 500-S4 Multistage pressure column distillation unit Dodpfx Ajyfhtnjpwjwa Stainless, designed for the production of sterile, non-pyrogenic water for injection (WFI), all mounted on skid, four column system, 660 l/h pressurized heating steam, 4Bar, adjustable controls, 3Ph

Condition: used, Year of construction: 1993, Previous use: distilled water Capacity : 100 L/H Material: glass Year : 1993 Dwjdpfx Ajx Rz Nnjpwoa The unit includes : Level regulator Electrical control box Frame Pump Coil heat exchanger (1.2 bar max) Electric tank heater 5000W 200 litre glass tank Tubular exchanger (1.2 bar max) Photoelectric level Boiling chamber Stainless steel coil boiler: stainless steel 316 (1.2/1.5 bar max)

Year of construction: 2006, condition: as good as new (ex-display), machine/vehicle number: 31331, DISTILLER DNP 2000 SEMI-AUTOMATIC STEAM DISTILLATION SYSTEM - PROTEIN-NITROGEN Raypa DNP-2000 Year of manufacture 2006, unused Protein-Nitrogen distiller based on the Kjeldahl method. Automatic, to analyse protein nitrogen in raw material samples or processed material for the food industry. Specific methods available. Results comply with regulations: EN/ISO, AOAC. NITROGEN DISTILLER – DNP-2000 Features • Twenty free user programs. • Additionally, the system has three fixed programs: – Ammonium sulphate test. – Preheating of the system. – Sample waste washing. Advantages • Optional kit for automatic titration. • Sample suction. Dwedpfefiliwjx Apwoa • 20 user programs. • Pump calibration by end-user. • Steam generator with water level control. • Boric acid pump. • Open door sensor. Performance • Measurement range: from 0,1 to 200 mg of N. • Nitrogen recovery: ᐳ 99,5%. • Reproducibility: ± 1%. • Distillation time: 4 min/100 ml. • Cooling water consumption: 1,2 l/min. • Power: 2000 W (100%). Programmable parameters and values • Water for dilution: 0-240 ml. • OHNa solution: 0-240 ml. • H3BO3 solution: 0-240 ml. • Reaction time (delay): 0-30 min. • Distillation time: 0-30 min or indefinite. • Steam power regulation: 30-100%. Safety • Closed-door detection. • Digestion tube detection. • Over-temperature thermostat. • Uses in the food industry but also in oenology for vinification. • Documents: Manual instruction + mounting gaskets and socket • For the Romanian companies, there is the possibility of selling in installments. Price Euro 3.600 + VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: CE marking, Multi-purpose reaction system with a glass structure made of borosilicate glass, Büchi Glas Uster. The system consists of two multi-purpose units, each with one CR 101 reactor and one gas scrubber. These are two complete systems that can be configured and operated together or separately as individual units. We can design and adapt the configuration according to customer requirements, which also includes the system control. The two CR 101 reactors have a working volume of 100 liters, with a maximum volume of 205 liters each. They are made with a steel enamel lower part that can be heated, and a glass upper part with a drive, mechanical seal, impeller agitator, and stirrer with a PT 100 temperature probe, all made of steel enamel. The original agitator drives were replaced in 2016 with an RWD-30-L ATEX drive from Büchi. Dwsdpfxsy Rkk Ue Apwja

Year of construction: 2006, condition: like new (used), Details on request Dodpsfla Emsfx Apwowa

Year of construction: 1999, condition: good (used), For sale is a water treatment plant of make ENVOTECH and type 0320 from 1999. In 2016 a new reaction tank of the brand Leiblein, made of stainless steel, with the dimensions of 500*500*400 mm was added. The plant is fully functional and the contact details of the competent service technician are available and can be forwarded at the time of purchase. Technical data & information: Dodpfx Aepl Tqtjpwewa - Executed in stainless steel - Including oil separation by coalescence principle - Including automatic cleaning - Built-in pump for waste water, concentrate and distillate - Frequency control of the compressor motor - Type: 0320 - Rated capacity l/h: 320 Energy consumption - In operation: 25 kW - Maximum power: 35 kW Supply voltage: 3*400 V - 50 Hz Dimensions lxwxh: 245x155x265 Face: ca 2600 kg Sound pressure level: 75 dB All data refer to operation with water On request, loading and shipping can be organized throughout Europe. Prices plus VAT Viewing by appointment possible. Contact us, our team is happy to help you. Ch3mj0l3eg Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: used, Filling content - 150 ltr. Agitator - 0.75 kW Bubble - 800mm Overall height - approx. 270 cm Filling opening - approx. 35 cm Dwedjxytwaspfx Apwea Spout - approx. 20 cm Tap - inch Smoke pipe - approx. 18 cm Fuel - wood / steam

Condition: ready for operation (used), Year of construction: 2018, Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible. Dwedpoygmcdjfx Apwoa

Condition: used, functionality: fully functional, capacity of 3 buckets, each 800 kg Djdpsxd H Itofx Apwewa

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, pressure: 0.5 bar, We are offering this refurbished Carl water bath still - column distillery, year of manufacture 2006. Com No.: 12 276 / REV 13 976 Year of manufacture: 2006 / Refurbished 2024 Filling volume: 110 l Max. operating overpressure: 0.5 bar Heating: electric heating elements Power: 30 kW Water bath jacket capacity: 180 l Dwedjyux E Tepfx Apwja If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Little used ethanol / alcohol dehydration plant manufactured in Spain in 2015 with capacity 90,000 litres/day of minimum concentration 99.8 ºGL alcohol suitable for use as biofuel. Raw material should be distilled alcohol with a minimum concentration of 95.5 ºGL. Major equipment includes: - (2) Molecular sieves; (2) vertical shell & tube heat exchangers; (4) horizontal shell and tube heat exchangers; alcohol evaporator; (2) plate heat exchangers; column; (2) process tanks; pumps and motors; instrumentation, controls and valves; steam boiler. Dwedpfx Aoyhc Ixspwoa Process description available on request.

Condition: used, Year of construction: 1998, cleansing medium Per Djdpfx Aezid Dvjpwswa filling amount 15.000 l heating capacity 275 kW Cooling capacity 43 kW Batch size LxWxH (max., approx.) 2.250 x 1.00 x 1.150 mm Batch weight (approx.) 1.000 kg Throughput (approx.) 2 Chargen/h Cycle time (approx.) 30 min Loading height 1.010 mm Distillate output (approx.) 1.000 ltr/h base area 20 x 10 m Number of working hours ca. 67.904 h connected load 122 kW connected load frequency 3 x 400 V ampere 262 A dimensions ca. 15.000 x 8.200 x 6.00 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Dimensions and weights - Overall dimensions Length: 15,000 mm Width: 8,200 mm Height: 6,000 mm - Vacuum chamber (usable dimensions) Length: 1,630 mm Width: 3,500 mm Height: 1,510 mm - Product weight: 200 kg Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2012, machine/vehicle number: SO141, Used MORETTO EPL 5-8 N blow molding machine - Year 2012Technical Specifications & Performance DataThis extrusion blow molding machine is engineered for producing hollow plastic containers with high repeatability and efficiency. Manufactured by Magic with a full-electric drive concept, it is equipped for industrial packaging and beverage production environments where precision, uptime, and energy efficiency are critical. It suits used bottling line upgrades and second hand equipment integrations requiring robust blow molding capabilities.Blow molding process: Extrusion blow molding, full electricMaximum blown container volume: 8000 cm³Clamping force: 100 kNSpeed: around 200 Unit/hour for ( Distilled water container ) Dry cycle time: 2.2 sOpening stroke: 250 mmMaximum mold dimensions (L × P × A): 425 / 2x130 / 400 mmGeneral electrical power: 15 kWTotal installed electrical power: 64 kWExtruder screw diameter: 70 mmExtruder L/D: 24 L/DExtruder motor power: 35 kWExtruder heating zones: 5Extruder heating power: 10.6 kWSingle extrusion head max die diameter: 100 mmHead heating zones: 4Head heating power: 3.8 kWMachine footprint (W × L × H): 1900 × 5050 × 3250 mmTotal system weight: 7000 kgNoise level: 75 dB(A)Advanced Automation & Control SystemsThe full-electric architecture enhances precision and repeatability while minimizing energy consumption and maintenance compared to hydraulic systems. Fast dry-cycle performance supports higher throughput and stable cycle times. Temperature control across multiple heating zones on the extruder and head ensures consistent parison quality and stable process control for demanding industrial packaging applications.Full-electric drive for efficient, clean operationMulti-zone temperature management on extruder and die headStable, repeatable dry cycle for consistent productionOperator-friendly adjustments and setup for mold changesProcess reliability suitable for stringent quality requirementsProduction Line Integration CapabilitiesThis machine integrates smoothly within a used bottling line or a mixed-manufacturer production environment. It comes with a comprehensive set of auxiliaries to streamline upstream and downstream handling, supporting end-to-end beverage production or industrial packaging workflows.Included auxiliaries: hopper feeders, suction unit, dryer, granulator, cooler, color mixer, conveyorsAuxiliaries brand: Moretto (most components purchased new in 2012)Inline or standalone operation for flexible layoutsSupports diverse container geometries enabled by robust clamping and mold size window... Dwjdpfx Aszrgqkspwsa

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Wavelength: 635 nm Output power: < 1 mW MACHINE DETAILS Ambient temperature: 10–40 °C Dodezncm Hepfx Apwswa Relative humidity: < 95% (non-condensing) Connected power: 37 kW Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Maximum inlet pressure: 6 bar Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Operating hours (according to meter): 27,875 h

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02343, EVT GIGANT Vapor Degreasing System The system offered is ideally suited for the reliable removal of oils and oily residues from metal parts using the vapor degreasing process. Thanks to the generously sized work basket, high throughput rates are possible. Since this design does not include flooding of the work chamber, the required solvent volume remains relatively low, despite the large chamber size. This system is in good used condition and can be inspected and tested in our technical center in D-75447 Sternenfels by arrangement. Technical highlights: - The system recently underwent a comprehensive maintenance service by EVT. - The system was inspected for compliance with the German Federal Immission Control Act (BImSchV) by Chemlab as recently as March 2026. - The system was approved by DEKRA in July 2026. System features: - Closed system without exhaust air - Top loading - Rotating and pivoting device - Spray device - Flooding device with heated feed tank - Vapor degreasing - Recirculating air drying - Activated carbon module (designed for 2-shift operation) - Atmospheric distillation - Solvents that can be used: Perchloroethylene (PER) - Basket dimensions L/W/H: 1100x450x370 mm (internal dimensions) or alternatively 6 x 480x320x200 mm (external dimensions) - Throughput: max. 2 batches/h - Compressed air: 6 bar Dedszrw Dbjpfx Apwewa System availability: from October 2026 P.S. This offer is non-binding and subject to change. Modifications, errors and prior sale expressly reserved.

Condition: good (used), functionality: fully functional, year of last overhaul: 2026, We are selling a well-maintained, fully functional Quadient DS600i envelope inserting machine. The machine consists of: - Tower Feeder, 2 stations, with CIS and Datamatrix reading - Inserts feeder, 1x (up to A4) - Inserting module - Stacking conveyor - Modified with a C4 float switch (suitable for gluing with distilled water) Complete with matching base cabinet. Djdpey Du Ecefx Apwjwa The machine is in perfect working order and has been regularly serviced by Quadient. Counter reading: 3,617,695 The machine is currently in production and powered on, but is available immediately.

Condition: used, Year of construction: 2002, lifting height: 4,750 mm, Electric forklift Hyster ES.50XL, year of manufacture 2002, serial number 107412. Dodpfx Aezpwfyjpwowa Specifications: Brand: Hyster Type: ES.50XL Year of manufacture: 2002 Serial number: 107412 Lifting capacity: 5500 kg Lifting height: 4750 mm Fork length: 1200 mm Equipped with a charger and 7 cans of distilled water.

Year of construction: 2011, condition: used, THERMATOOL CFI 250 Solid State HF Welder 250 kW High frequency tube welding machine This THERMATOOL CFI 250 is a Solid State High Frequency Welder designed for the production of steel tubes and profiles using high-frequency welding technology. With an output power of 250 kW and a 400 kHz welding frequency, it delivers reliable, efficient, and high-quality welding performance for tube mill production lines. Technical Specifications · Manufacturer: THERMATOOL · Model: CFI 250 Djdezpx Iiopfx Apwjwa · Year: 2011 · Output Power: 250 kW · Welding frequency: 400 kHz · Input Voltage: 3 × 400 V · Input Current: 578 A Main Features · 250 kW MosFet HF inverter with 5 pairs of modules (5 positive & 5 negative) · AUTOMATCH automatic load matching system · 250Kw DC rectifier with PLC control Siemens S7 · Remote control console · Closed-loop distilled water cooling system Looking for a used THERMATOOL HF welder, 250 kW solid-state welder, or other second-hand tube mill equipment? Explore our extensive range of quality used machinery for the steel tube industry. Input Voltage: 3 × 400 V Input Current: 578 A Welding frequency: 400 kHz Output Power: 250 kW 250Kw MosFet HF Inverter with 5 pairs of modules: 5 positive & 5 negative 250Kw DC rectifier: with PLC control Siemens S7

Condition: excellent (used), Liebisch SKBWF 1000 A-TR Corrosion Test Unit Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: SKBWF 1000 A-TR Corrosion test unit / salt spray chamber for salt spray, condensation, and combined tests. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1210 mm Internal dimensions: approx. 1535/1425 x 800/780 x 660/650 mm Max. test specimen load: 10 kg per level Voltage: 400 V Frequency: 50 - 60 Hz Phases: 3~ Rated current: 12 A Power data according to nameplate: S Watts: 2800 W K Watts: 2150 W B Watts: 500 W W Watts: 1700 W Test solution reservoir: approx. 150 liters Distilled water consumption for humidifier: approx. 80 - 120 ml/h Test solution consumption: approx. 0.7 - 1.0 l/h Water filling for bottom trough system: approx. 15 liters Test procedures DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 Equipment Dwodpozba N Tofx Apwoa Automatic control Touch panel / operating panel GFK test chamber Test specimen grids Test specimen holders Connections for temperature, humidity, compressed air, and test solution NaCl test solution supply Deionized water supply Condition Used unit from industrial application. Optical condition as shown in the pictures. Inspection possible by appointment. Scope of delivery: (See picture) Shipping or freight forwarding possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by phone.

Year of construction: 2010, condition: used, Article: Parts cleaning system Dwjdpfx Aezickzopwoa Manufacturer: EVT Eiberger Verfahrenstechnik GmbH Type: LIMPIO - PER Yob: 2010 Solvent: Perchloroethylene Customizable work chamber design as a FRONTTOP loader Regenerable adsorption system Continuous distillation of the solvent Combined vacuum drying Immersion cleaning with recirculation system Rotary-swivel mechanism for the baskets Concentration limit sensor Touchscreen operation Remote diagnostic unit Spray system Second storage tank for solvent Cartridge filter unit with filter drying Feeding system Filling and emptying valves Connection to batch distillation unit Maintenance exhaust system Self-sufficient compressed air supply Plexiglas enclosure Connection to roller feeding system Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 2,000 kg, lifting height: 135 mm, fuel type: electric, power: 1.2 kW (1.63 HP), For sale is a fully functional low-lift truck (also known as an “Ameise”), complete with electric drive, charger, and Aquamatik trolley for refilling the batteries with distilled water (see photos). Dodpfxeznl N De Apwswa Please also refer to the attached data sheet for the device.

Condition: used, Air cooler, evaporator, cold cell, industrial cooler, cooling unit, cooler, water cooler, cooling system, cooling -Manufacturer: Gretag Cooler -Cooling system comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -for distilled water Dwjdpfoda Sf Ijx Apwja -Dimensions: 482/620/H177 mm 590/240/H705 mm -Weight: 37kg

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, total width: 1,800 mm, total length: 3,500 mm, total height: 2,500 mm, High-quality degreasing and cleaning system based on PER This system is a high-quality and high-performance degreasing and cleaning system based on perchloroethylene (PER) with a standard basket size. Thanks to two pre-treatment tanks, integrated ultrasonic cleaning, and vacuum drying, the system enables safe, thorough, and fast degreasing of a wide variety of metal workpieces. The complete stainless steel piping and high-quality system components ensure high operational reliability and a long service life. The system has been professionally overhauled and is ready for immediate use. An inspection of the system while it is running is possible at any time in 75447 Sternenfels after prior arrangement. We are always available to provide further information or answer any questions you may have. We look forward to your inquiry! System equipment: - Workpiece handling - Spray system - 2 x hot flushing systems - Ultrasonic cleaning with 1.0 kW / 25 kHz - Process filter 100 μm - Fine filter 5 μm Dodpfozmxlpsx Apwewa - Vacuum drying - Vacuum distillation - Adsorption unit Technical data: Solvents that can be used: Perchloroethylene PER Filling volumes: 600 dm³ Operating mode: 2-shift Connected load: 40 kW Compressed air: 6 bar System weight: 3000 kg Throughput: Up to 5 batches/h (150 kg/h) Basket dimensions: 480 x 320 x 300 mm

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Process Description The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. Dsdpfjzcwitox Apwowa System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available.