Used Sterilizer for sale (192)

Condition: excellent (used), Year of construction: 2001, TUBULAR JUICE UHT STERILIZER MADE BY KF ENGINEERING, GERMANY Bsdpfev Tl D Nex Aknewu CAPACITY 11 TONS PER HOUR FOR ALL JUICES, INCLUDING TOMATO MAX TEMP. 124 DEGR. C. PLC SIEMENS-7

Condition: used, Year of construction: 2005, The machine is dosing ClO2 into water to use it in a Rinser. Bwjdpfx Akoz Icn Ienou

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: Trans Smart 555, Fully automatic steam sterilizer. The unit features a range of pre-set programs for the most common sterilization processes used in hospital and general applications. Program cycles employ mechanical air extraction with a series of vacuum/pressure pulses to effectively remove air, ensuring proper sterilization. The chamber dimensions are adapted for sterilization, accommodating wire baskets according to ISO and STU or containers according to DIN. The unit has a capacity of up to 555 L. The temperature range is from 121°C to 135°C. Bwodpfxjy Iplls Akneu Key Features Chamber and lining made of AISI 316L stainless steel. Automatic vertically sliding doors. Drying system. Process monitoring. Built-in printer.

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: no compressor included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment Bwodjzwgxrjpfx Aknju (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: STERIVAP 6612, For sale is a BMT STERIVAP 6612 steam sterilizer from an active food production facility. Bjdpfozccunjx Aknowu The autoclave was originally designed for medical applications and is currently used successfully for sterilizing beverage bottles. Up to 350 bottles are processed per sterilization cycle on specially adapted transport trolleys. The unit features integrated steam generation, a modern Siemens control system with a touchscreen, and programmable sterilization cycles with stored programs for temperatures above 121 °C. The system is in very good technical condition. The heating elements have been replaced, wear parts have been regularly exchanged, and all maintenance has been performed on an ongoing basis. The autoclave is currently in daily operation and can be inspected under production conditions until August 2026. Further details: Usable volume: 610 liters Pass-through design Integrated steam generation Siemens control system with color touchscreen Display currently set to Polish, other languages possible Programmable sterilization cycles Stored programs > 121 °C Heating elements replaced Regular maintenance Wear parts regularly replaced 1 transport trolley included Additional transport trolleys available Currently used in a food processing facility Inspection possible during operation Available from 01.09.2026 Location: 58-508 Siedlęcin, Poland Price: €20,900 (negotiable).

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, Professional BELIMED MST-V 6-6-12 VS2 steam sterilizer from an ongoing food production facility for sale. Bedpfxjzccqie Aknjwu The unit was originally developed for the medical field and is now successfully used for sterilizing beverage bottles in a smoothie production line. Up to 350 bottles are sterilized per cycle on specially adapted trolleys. The autoclave features a modern Siemens control system with a touchscreen, programmable sterilization cycles, and stored programs for sterilizations above 121°C. Programs are programmable, and the display language can be selected. Of particular note is a recent test report from an independent food institute, featuring FDA-compliant temperature penetration measurements within the product. The system is in very good technical condition. In recent years, the sterilization door, pumps, and motors have been replaced. The autoclave is currently in daily use and can be inspected under real production conditions until August 2026. Further details: * Pass-through design with a door at the front and rear * Siemens control system with a color touchscreen * Display currently set to Polish; other languages are possible * Programmable sterilization cycles * Stored programs > 121°C * FDA-compliant temperature penetration measurement available * Test report from an independent food institute available * New sterilization door * Pumps replaced * Motors replaced * Regularly maintained * 1 transport trolley included * Additional transport trolleys available * Currently in use in a food production facility * Inspection possible during ongoing operation Available from 01.09.2026 Location: 58-508 Siedlęcin, Poland Price: €29,900 (negotiable)

Year of construction: 2017, condition: as good as new (ex-display), functionality: fully functional, Pharmatec Syntegon SVP 250 LF – Formulation System for Sterile and Aseptic Liquid Pharmaceuticals For sale is a Pharmatec Syntegon SVP 250 LF formulation system for Small Volume Parenterals (SVP). The sale is on behalf of Syntegon (manufacturer, formerly Bosch Packaging/Pharmatec GmbH, Dresden). Technical Specifications: - Suitable for aqueous solutions, suspensions, and emulsions - Adaptable processing: terminal sterilization, sterile filtration, aseptic compounding - 2-vessel system for batch sizes of 25–250 L (expandable up to 4 vessels) - Dosing of additives via manway under LAF or pump system - Potent actives (OEB4/OEB5) processing via high-containment valve - CIP/SIP interfaces and pre-configured automation for integration with filling lines - GMP-compliant design, suitable for cleanroom classification Bsdexdy Erepfx Aknowu Pricing: - Special price: please submit your offer - Original price in 2018: approx. €1,050,000 - Current list price for similar systems in 2025/2026: €1,415,000 Completion Status & Delivery Time: - Currently, the system is not fully operational, as the automation system including software needs to be reinstalled and certain components require replacement. - Completion will be handled directly by the manufacturer Syntegon, in consultation – expected lead time is approx. 3–4 months. - For comparison: lead time for a new system is approx. 12 months. Special Features: - System was originally built for exhibition purposes (demonstration unit) - Sale is directly on behalf of Syntegon, the original manufacturer - Ideal for pharmaceutical companies seeking a flexible and high-performance SVP system with a manageable delivery time.

Condition: excellent (used), ROSSI & CATELLI OLIMPIC TC XX/ASD Aseptic Multitubular Sterilizer – Stainless Steel ROSSI & CATELLI OLIMPIC TC XX/ASD aseptic multitubular sterilizer, designed for the continuous thermal treatment of liquid, semi-liquid, and viscous food products in aseptic processing lines. The system uses tubular/multitubular heat exchange technology to heat and subsequently cool the product indirectly and in a controlled manner. It is designed for processes where sterilization conditions must be achieved before proceeding to storage or aseptic filling. Its extensive configuration of stainless steel tubular sections provides a large heat exchange surface area and allows the different phases of the process to be integrated into a single unit. MAIN FEATURES -Manufacturer: ROSSI & CATELLI -Series: OLIMPIC -Model: TC XX/ASD -Type: Aseptic multitubular sterilizer -Tubular/multitubular heat exchange technology -Continuous thermal treatment -Indirect product heating -Heating and cooling sections -Thermal holding tubes -Stainless steel construction -Multiple heat exchange modules -Sanitary connections -Self-supporting industrial structure -Designed for aseptic processes -Integrable into complete aseptic processing and filling lines PROCESS The ROSSI & CATELLI OLIMPIC TC XX/ASD is designed to continuously perform the different stages necessary for the thermal treatment of the product. The product circulates through the multitubular system, where it can pass through different phases of preheating, heating, sterilization, thermal holding, and cooling, depending on the configuration and parameters established for each process. Indirect exchange allows for controlled product temperature while keeping it separate from the heat transfer fluid. It can be integrated with: -Product preparation tanks -Sanitary pumps -Homogenizers -Deaerators -CIP systems -Aseptic tanks -Aseptic fillers -Complete UHT/aseptic processing lines APPLICATIONS Bwsdpfx Akozw E D Teneu Especially suitable for the juice, processed fruits and vegetables, tomato, sauces, purees, concentrates, and other liquid or viscous food products that require continuous thermal treatment. Depending on its configuration, it can be used for fruit juices, purees, and pulps, concentrates, tomato products, sauces, and other pumpable products intended for aseptic processing. The combination of ROSSI & CATELLI technology, the OLIMPIC system, and multitubular configuration provides an industrial solution for continuous sterilization and aseptic production processes. Machine available for inspection. Additional technical information, dimensions, photographs, or videos can be provided upon request.

Condition: excellent (used), FENCO Multitubular Aseptic Sterilizer – Stainless Steel FENCO multitubular aseptic sterilizer, designed for the continuous thermal treatment and sterilization of liquid, semi-liquid, and viscous food products in aseptic processing industrial lines. The equipment uses a tubular/multitubular heat exchange system that allows for the indirect and controlled execution of the different phases of product heating and cooling. This technology is especially suitable for processes where precise thermal treatment is required before storage or aseptic filling. Its configuration with multiple tubular sections in stainless steel provides a large exchange surface and allows for the integration of different thermal stages within a single continuous process installation. MAIN FEATURES -Manufacturer: FENCO -Type: Multitubular aseptic sterilizer -Technology: Tubular/multitubular heat exchange -Continuous thermal treatment -Indirect product heating -Heating and cooling sections -Multiple heat exchange modules -Stainless steel construction -Sanitary product connections -Integrated piping and valve system -Process pumps -Self-supporting industrial structure -Designed for aseptic processes -Integrable into complete aseptic processing and filling lines PROCESS Bjdszw E R Tspfx Aknjwu The FENCO aseptic sterilizer is designed to circulate the product continuously through different heat exchange sections. Depending on the process configuration, the product can pass through preheating, heating, sterilization, holding, and cooling stages, controlling the necessary conditions before being transferred to a storage tank or aseptic filling system. Indirect exchange allows the treatment to be carried out while keeping the product separate from the heat transfer fluid. It can be integrated with: Preparation tanks Sanitary pumps Homogenizers Deaerators CIP systems Aseptic tanks Aseptic fillers Complete UHT/aseptic lines APPLICATIONS Especially suitable for the fruit and vegetable, tomato, juice, puree, concentrate, sauce, and other pumpable food industries that require continuous sterilization before aseptic packaging. Depending on its configuration, it can be used with fruit juices, pulps, and purees, concentrates, tomato products, sauces, and other liquid or viscous products. The combination of FENCO technology, multitubular exchange, and sanitary stainless steel construction provides an industrial solution for continuous sterilization and aseptic production processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2015, condition: excellent (used), Reportedly very little used Plümat model BFL 851 automatic machine to fill and close flexible pre-sterilized IV-Bags under pharmaceutical conditions. Made in 2015, the line consists of frame with safety guard, manual bag feeding, printing station, automatic bag infeed, tube cutting station, filling station, tube welding station, tube cooling station, bag outfeed, control cabinet. The filler is a linear single lane system. The system is in compliance with GMP and FDA standards. - processable bag formats (2 tubes = free tube length 30 mm presealed with Vial stopper & 40 mm sealed by welding or open tube): 100 ml, 250 ml and 500 ml - capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - filling accuracy: 100 ml = ± 2.0 %, 250 ml = ±  1.0 % and 500 ml = ±  0.7 % - dosage range: 100 ml - 1000 ml - welding method used: heat contact welding - filling system: SIEMENS S7 including counter card with mass-flow measuring system and pneumatic filling valves Bwodpelhqndjfx Aknju - controller: SIEMENS S7 Microbox with Profibus DP and TP 1500 touch terminal - power supply: 5.5 kW, 230/380 V, 50 Hz - compressed air supply: approximately 700 l/min, min 6 - max 8 bar - cooling water supply: approximately 4 l/min, temperature 18-21°C - weight: approximately 1350 kg (net) and 1750 kg (gross) - dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,200 h, functionality: fully functional, total height: 3,250 mm, total width: 2,000 mm, total length: 7,870 mm, type of input current: three-phase, input voltage: 400 V, pressure: 90 bar, operating pressure: 90 bar, power: 120 kW (163.15 HP), compressed air connection: 6 bar, control voltage: 400 V, overpressure (max.): 100 bar, input frequency: 50 Hz, Sterilizer for natural and concentrated fruit and vegetable purees. Max. product infeed 5- 10,000 kg/h, depend of the product, sterilization temperature up to 110°C , holding time up to 120s. Steam consumption 2100kg/h. Complete with buffer tank 5000L, screw pump, piston pump, vacuum pump and filling machine MakropackTM2000_3 for aseptic filling of 220-liter bags. Bwodpfszpx Shjx Aknsu

Condition: used, functionality: fully functional, The Terumo SCD IIB Sterile Tubing Welder, P/N 72508 provides reliable, high-quality welds for sterile tubing connections, completes a weld cycle in 30 seconds, is compact and portable, requires minimal technical training and can be implemented seamlessly into existing processes. Tubing requirements: Bedpfouyu N Eox Aknjwu Polyvinyl chloride (PVC) tubing with a nominal outer diameter of 5.46 mm (0.215 inch) and a wall thickness of 0.84 mm (0.033 inch) or C-Flex tubing with a nominal outer diameter of 6.35 mm (0.25 inch and a nominal inner diameter of 3.18 mm (0.125 inch). Good working condition. Please check out our other listings as well.

Condition: excellent (used), functionality: fully functional, Production lines for fruit and vegetable preserves. A significant portion of the equipment is newer – from 2011 and 2014 – supplemented by older, robust machines that have proven their reliability through years of continuous operation. The machines are sold as a complete line. Line capacity (based on an example product) – approximately 1200 liter jars/hour (~1.5 tons/hour). This translates to approximately 28,800 jars/day, or ~36 tons/day. (I) What can be produced on this line: - Compotes (jars, bottles) - Jams and thick preserves - Juices (bottle filling, tube pasteurization) - Canned goods (sterilization in an autoclave) - Pasteurized preserves in jars (pickles, vegetables, sauces) Bwsdpfx Ajz Daatoknsu (II) Process flow: 1. Product dosing – into buckets, jars (2 dosing machines) 2. Filling – bottles (filling machine), cans (dosing machine + seamer) 3. Thermal processing – boiling tank, evaporators (juice/puree concentration), tube pasteurizer (liquid product before filling) 4. Packaging closing – sealers (bottles, jars), capping machine 5. Sterilization/pasteurization of finished packaging – autoclave (cans, jars), tunnel pasteurizers (3 units) 6. Labeling – labelers for bottles, jars and cartons 7. Collective packaging – heat tunnels (shrink film), conveyors (III) Equipment list: 1. Carton labeler 2. Heat tunnel (shrink film) 3. Conveyors 4. Heat tunnel 5. Bottle labeler 6. Jar/bottle labeler 7. Heat tunnel x 3 8. Labeler (without control panel) 9. Tunnel pasteurizer x2 10. Dosing machine for buckets 11. Dosing machine + seamer for cans 12. Pleszew Autoclave (2011) 13. Tunnel pasteurizer 14. Dosing machine 15. Capping machine 16. Seamer 17. Bottle filling machine 18. Jar seamer 19. Dosing machine for jars x2 20. Tube pasteurizer 21. Evaporator x3 22. Boiling tank Total value: 2,380,000 PLN = ~ 545,000 EUR (IV) Why buy the entire line: Complete process line – from dosing to collective packaging – without the need to find missing components. Option for pickup with dismantling and transportation (to be agreed upon). Equipment used in production – documented history of use. Flexible sales options: entire line, separate technological units (e.g., canned goods section with autoclave, bottle filling section), or individual machines. Terms: Visit possible by prior arrangement. Transportation and dismantling to be agreed upon.

Condition: used, functionality: limited functionality, machine/vehicle number: Biocap DNA, Used Captair Biocap DNA UV sterilization cabinet Manufacturer: Captair / Erlab Bodexliivspfx Aknswu Model: BiocapDNA Voltage: 230V (50Hz)

Condition: excellent (used), Year of construction: 2010, Sterile tank with agitator, temperature-controlled, upright Technical data / dimensions Available quantity: 1 Volume: approx. 6,000 liters Container type: Sterile tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 1,700 mm External diameter: approx. 1,854 mm Cylindrical height: approx. 2,264 mm Total height: approx. 5,390 mm Weight: approx. 2,030 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: negative pressure/vacuum Operating pressure: 3.5 bar Test pressure: 5.4 bar Bwedpfxjtyz Ize Akneu Wall thickness bottom: approx. 5.2 mm Wall thickness top: approx. 8.4 mm Wall thickness jacket / cylinder: approx. 5.2 mm Ground clearance: approx. 800 mm Operating temperature: 150 degrees Celsius Type plate available Manufacturer: GEA serial no.: 2376 Year of construction: 2010 Material / condition Material inner jacket: V2A (1.4541) Material double jacket: V2A (1.4541) Feet material: V2A (1.4541) Outer surface: bright rolled 2B Internal surface: Ground Ra

Year of construction: 2001, condition: used, machine/vehicle number: 010786, -2x Autoclave Getinge GE 2606-1 -2x Steam generator Getinge 50 liters – 56 kg/h Bedpfewx Hwasx Aknewu -2x Vacuum pump Sterling SIHI Lema 90 AZ

Condition: excellent (used), Year of construction: 2007, - Capacity: 10,000 bottles/hour - Year of manufacture: 2007 - Equipped with an ozone generator - Manufacturer: PROMEC - Model: Rotonech - M1110-36 - 2 - Type: Two-channel sterilizer-rinser - With recirculation tank, pump, and filter - Nozzle heads: 36 pieces - With enclosed hood and ozone air extraction - Conveyor height: 1250 mm (including additional base supports) - Bottle formats: from 55 mm to 99.8 mm (total of 20 different bottle types) - Direction of travel: Left to right Dimensions: - Width: 1900 mm - Depth: 2200 mm Bwsdpfxezb H Nmo Akneu - Height: 2250 mm - Machine available from the end of July 2026 - Machine in good condition

Condition: good (used), Year of construction: 1984, - 6 rows of bottle cages - WITHOUT OZONE GENERATOR Bwedpfx Asralr Hoknsu - Machine in working condition - Machine available immediately - Video available on request

Condition: ready for operation (used), Steris EPS Endoscope Processing System Year of manufacture: 2010 S/N: 3611710001 You are welcome to come by for a viewing. We are happy to organize a cost-effective shipping company for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and take a look at our other offers. The company names and trademarks given are the property of their owners and are used only to identify and describe the products. Bwjdevypuxepfx Aknsu Deviations from technical data and errors in the description of the article can occur and are reserved.

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected Bwsdexm Rwqepfx Aknju 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: used, Year of construction: 2022, functionality: limited functionality, Complete, industrially manufactured water treatment system for ultra-pure, demineralized water, 400 l/h (< 3 µS/cm, depending on the raw water), delivered in December 2022. Multi-stage: raw water filter Berkofin KS25 HWS, compact demineralization ion exchanger BerkeSOFT midi 2-45, reverse osmosis Terion-S 500 with pressure pump/membrane modules, electrodeionization (CEDI), NaOH dosing for CO₂ removal, UVC sterilization Aquafides 1AF4+. 980-liter pure water storage tank with E+H Levelflex FMP51 and capacitive level sensors. Frequency inverter-controlled pressure boosting, 2 m³/h at 6 bar. High-quality industrial components (including KSB, Grundfos, Calpeda, WIKA, Bürkert, Balluff). Technical data: - Capacity 400 l/h, < 3 µS/cm; RO membrane set valid until 28.07.2025 (approx. 265 m³ treated) - UV lamp replaced on 01.10.2025 (approx. 5,350 operating hours); storage tank 980 l; pressure boosting 2 m³/h at 6 bar, frequency-controlled - Note: CEDI unit currently defective/clogged, capacity currently ~20 l/h; repair offer dated 24.09.2025 is available. Extensive documentation and manuals are available. More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the customer through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer. Bwodpfx Ajzmap Neknju

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Complete craft beer bottling line: Cime Careddu GOLD DPS 6/6/1 rotary triblock (rinser – isobaric filler with double pre-evacuation – crown capper) and matching Compatta self-adhesive labeler. Both manufactured in 2018, installed in 2019 by Coenco (official Cime Careddu agent for the Benelux), professionally maintained, with low operating hours. Available immediately from a brewery in Dokkum, the Netherlands, due to production shutdown. 1. Triblock – Cime Careddu GOLD DPS 6/6/1 CROWN Type: rotary triblock (rinser – isobaric filler – crown capper) in stainless steel Year of manufacture: 2018 (serial no. 708) Rinser: 6 grippers, water rinse Filler: 6 isobaric (counter-pressure) filling valves with double pre-evacuation (DPS) and CO₂ pressurization for low dissolved oxygen Capper: 1 head for 26 mm crown caps, with crown feeder Bwodpfxezza Rij Aknsu Capacity: approx. 1,000–1,200 bottles/hour (33 cl) Bottle formats included: [e.g. 33 cl longneck Ø 60 mm, 33 cl Steinie Ø 69 mm, 75 cl Ø 85 mm – fill in] CIP: cleaning-in-place connections for internal and external sterilization Electrical: 400 V / 50 Hz / 3-phase + N Operating hours: approx. [xxx] hours (approx. [xxx,xxx] bottles filled) CE certified, safety guarding fitted 2. Labeler – Cime Careddu / ENOS Compatta Type: linear self-adhesive labeling machine, one label station (front or wrap-around label) Year of manufacture: 2018 (serial no. 720) Capacity: up to approx. 1,800 bottles/hour Electrical: 400 V / 50 Hz / 3-phase + N Manual station adjustment, suitable for round bottles from 25 to 75 cl

Year of construction: 2023, condition: like new (used), functionality: fully functional, ESCO Airstream Gen 3 Vertical Laminar Flow Cabinet Type: LVG-3AG-F8 Bjdpfoz D Tkfex Aknjwu Airstream Gen 3 Vertical Laminar Flow Cabinet While others rely on traditional PSC motors, the Esco Airstream® Gen 3 Vertical Laminar Flow Cabinet is the only vertical-type clean bench in the market that uses Direct Current Electronically Commutated Motor (DC ECM) technology. Reducing energy costs by up to 70%, these clean benches are the greenest ones yet. The secret to achieving energy savings through ECM technology lies in its high electrical efficiency and ability to run precisely on programmed speeds. Enjoy low heat and noise emission as well with the Esco Airstream Gen 3 Vertical Laminar Flow Cabinet. Esco's laminar air flow cabinet is a product of robust engineering combined with strategic ergonomic design. It provides long-term reliability and ultimate user comfort making it ideal for non-hazardous applications that need a sterile environment

Condition: used, Beco 400x400 KD 10 Aus Betriebsauflösung. Originalverpackt auf Palette Beco 400x400 KDS 12 Beco 400x400 Steril S Bsdpfjz Icawsx Aknewu Beco 600x600 KD 10 Beco 600x600 KDS 12 Beco 600x600 Steril S Genaue Anzahl siehe Excel Liste.

Condition: excellent (used), Incubator Type: Binder CB 210 CO² / 9140-0013 Technical data Temperature range: 7 °C above room temperature to 60 °C MB1 controller for temperature and CO2 concentration Internal volume: 210 liters External dimensions (W x H x D): 740 x 1069 x 715 mm Internal dimensions (W x H x D): 560 x 750 x 500 mm Weight: approx. 121 kg Bwsdpfszgbtcox Aknou Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.