Used Handling for sale (10,467)

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Gsdpfx Ajfx Hyfoggjbi Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing technology Type: Handy-flex 200 horizontal movement: 300 mm vertical movement: 370 mm Load capacity: 10 to 14 kg Projection: 250 to 550 mm guide column vertical: Ø 25 mm Guide columns horizontal: Ø 16 mm tool holder: Ø 26 mm oval with screw clamping - Movable in three axes (horizontal, vertical, rotary) - 1 piece Balancer for vertical movement TECHNA, type 9340, adjustment range 10 to 14 kg - adjustable latch for vertical movement, manual release via Bowden cable - for weightless suspension of small appliances - Load capacity adjustable - constant attraction Space requirement L x W x H: 880 x 500 x 1120 mm Own weight: 23 kg sound condition Godpfx Agofx Hxzogjbi

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 300 Horizontal movement: 490 mm Vertical movement: 400 mm Load capacity: max. 14 kg Handyflex projection: 275 to 765 mm Projection from frame: 725 mm Rotation radius at full projection: approx. 135° Height of mounting plate above floor 1250 to 1650 Vertical guide pillar: Ø 30 mm Gedpfjgbpuhex Aggobi Horizontal guide pillars: Ø 20 mm Mounting plate for tool holder: 305 x 90 - Can be moved in three axes (horizontal, vertical, rotatable) - Rotary encoder BAUMER type GI355.022C315 for rotary and horizontal movement - Balancer for vertical movement - Adjustable load capacity - for weightless suspension of small appliances - Ball bearing guide in all axes - mounted in a frame made of BOSCH system aluminum profile, cross-sections 45x45 / 90x45 / 180x45 / 90x90 mm - Height-adjustable feet Space requirement L x W x H: 1450 x 1250 x 2480 mm dead weight: 180 kg good condition

Condition: used, Handling Device, Handling System JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm with screw clamp - Movable in three axes (horizontal, vertical, rotatable) - KÜBLER rotary encoder for rotation, type 8.5873.5320.B311.S003 - BALLUFF linear transducer for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 pieces balancer for vertical movement CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer Gbjdjfgpfmspfx Aggji - For weightless suspension of small devices - Stepwise adjustable load capacity - Constant pulling force Required space (L x W x H): 770 x 310 x 1200 mm Dead weight: 19 kg Good condition

Condition: like new (used), functionality: fully functional, Year of construction: 2023, lifting height: 11,000 mm, overall weight: 7,000 kg, lifting speed: 250 mm/s, power: 5.5 kW (7.48 HP), input voltage: 230 V, input frequency: 50 Hz, Two (2x) entire units, each with maximum 11m lift, procured directly from manufacturer, delivered in 2024 but never assembled or used. All components have been stored in dry conditions. Godpsymx Avofx Aggsbi Can be configured for less than maximum lift. All documentation available. Price is per unit. Open to counter-offers. Purchaser must collect.

Condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Hydraulic pump for pedestrian stacker make: Climax Handling -Gear pump for: electric forklifts -Bicycle pump type: Gbodpfed Atx Rox Aggji -with: tank and control valve -Drive: 24 V -Dimensions: 320/105/H295 mm -Weight: 12 kg

Year of construction: 2010, condition: used, Lifting table, lifting platform, lifting platform, car lifting platform, scissor lifting platform, cleaning bridge, scissor bridge, lifting device, material lifter, lifting device -Manufacturer: Schmidt Handling, lifting device Godpjg N Tu Njfx Aggobi -Load capacity: 100 kg -Lifting height: 725 mm -Platform: 545 x 285 mm, tiltable -Dimension: 400/380 / H1260 mm -Weight: 205 kg

Year of construction: 2017, condition: good (used), Manufacturer: Zasche handling Type: GV 80 Year of construction: 2017 Load capacity: 80 kg Godeunyxaspfx Aggjbi with crane runway and lifting device

Condition: excellent (used), functionality: fully functional, An old classic—anyone familiar with this device swears by it. 3 units are available, including a box of spare parts with circuit boards, etc. Total price for the complete package of 3 devices: €2,999. Free delivery! Price for a single unit: €1,250. Gbodpfx Agjxk Ty Negoi

Condition: used, Year of construction: 2011, Gyárto: Wittmann tip: W702 Gyártási év: 2011 Gsdpfx Ajvyhqxeggobi A berendezés teljesen működőképes, megtekinthető és kipróbálható! programozó kezelő nélkül !!

Condition: new, New equipment, made in Denmark. Lifting time: 18 secs. Loading and unloading by means of pallet truck. Items are lifted to an ergonomically correct working height. Remote controlled lifting/lowering with emergency stop. Consumption 0,75 kW. Capacity: 1000 kg. Voltage: 3 x 400 V. Minimal lifting height: 80 mm. Maximal lifting height: 780 mm. External dimensions: 1420 x 1140 mm. Internal free space: 585 mm. Lifting / lowing speed: 42 / 48 mm/s. Gbjdpfxjd Hp Efs Aggoi Weight: 235 kg.

Condition: used, Year of construction: 2008, operating hours: 15,498 h, 2008 | Sennebogen 850R with hydraulic rotating grapple | Used Material Handling Excavator | 15498 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 165000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Gbsdpfxjx Ti T Ho Aggji 57 inspection points 47 approved ✅ 9 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Machine is operational with normal wear for 15,000 hours, some minor oil leaks. Turret brake needs inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "32948 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003572 - Manufacturer Code: 2-007-03-3970 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service, please contact us. 2KG - 36X26X21 Godpfx Agjyrn Ryegobi

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003544 - Manufacturer Code: 2-025-15-2010 - Condition: As new (display item) - Functionality: Fully functional - Compatible Machine: - If interested, we offer an overhaul service, please contact us. 3KG 46X39X27 Gjdpfx Agsyrn Hbegjbi

Condition: ready for operation (used), Year of construction: 2014, For Sale: Used WEMO 4-5 SR-2S Engusz Picking Robot Gjdpfxjyrd I Uj Aggsbi Viewable and Testable!

Condition: used, Year of construction: 2014, functionality: fully functional, For Sale: Used WEMO 4-5 SR-2S Engusz Picking Robot Viewable and Testable! Gsdpfx Asyrd Iboggjbi

Condition: refurbished (used), functionality: fully functional, power: 194 kW (263.77 HP), fuel type: diesel, color: green, empty load weight: 53,050 kg, Year of construction: 2012, operating hours: 13,200 h, machine/vehicle number: 835.5.1445, Very good Sennebogen material handling excavator with crawler chassis for sale. Gsdpfevzn E Eox Aggsbi Year of manufacture 2012 approx. 160 hours engine running time (new engine installed in 10/2024 for around €57,000, invoice available) Last maintenance and replacement of wear parts carried out in 02/2024 for €11,300. (Invoice available) Total operating hours approx. 13,200h

Condition: used, Electric Lift Table – Walkie Stacker, Pedestrian Pallet Stacker For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225 (lift2move) Serial No. 19153-HD Year of manufacture: 2010 Model No.: Rated load capacity: 225 kg Lift travel: 1770 mm Lift height: 2350 mm Lifting speed (unladen / laden): approx. 100 / 75 mm/s Load cantilever: 400 mm Chassis length: 1130 mm Underride height: 90 mm Gbedpfoflt Egjx Aggei Underride length: 600 mm Chassis version (front / rear): Ø 80 / 150 mm (2 fixed castors / 2 swivel castors) Overall length: 1130 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Wired remote control with spiral cable and button for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 x 12 Volt, 17 Ah lead-acid batteries installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amp (mains voltage 230 V, 50 Hz) - Manually movable, steering castors with three-stage parking brake - Continuously height-adjustable handlebar - Load mounting flange as per EXPRESSO standard 380 x 50 mm / 4 mounting holes M10, spacing 100-120-100 mm Fitted lifting aid: Four-prong fork attachment, Expresso type, Rated load of lifting aid: 40 kg - Lifting aid manually swivelled by 90° (lockable only in 0° position) - Lifting aid laterally adjustable on linear guide by ±100 mm (locking only in center) - Width between support arms: 320 mm - Height between support arms (lockable at): 365 / 400 / 450 mm (max. opening without locking holes: 510 mm) - Depth between support arms: 150 mm up to stop bolt / 300 mm max. Total weight: 100 kg Good condition

Condition: used, Electric Loading Lift – Pedestrian Stacker, Tiller Stacker Gbedsflt Efopfx Aggei for ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 175 (lift2move) Serial No.: 19152 Year of manufacture: 2010 Type No.: Rated capacity: 175 kg Lift travel: 1090 mm Lift height: 1780 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Reach of lifting aid: 800 mm Chassis length: 1100 mm Underride height: 175 mm Underride length: 670 mm Chassis version (front / rear): Ø 120 / 150 mm (2 swivel castors / 2 swivel castors) Total length: 1220 mm Total width: 700 mm Overall height: 1950 mm Maximum height: 2870 mm (with lifting aid fully extended) Motor power: 400 W Battery capacity: 24 V / 17 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 x Lead-acid batteries, 12 Volt, 17 Ah in battery pack - External charger 24 VDC, 3 Ampere (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load carriage double flange according to EXPRESSO standard, 2 pieces mounted on top of each other, each 280 x 50 mm / 4 mounting holes M10 Mounted lifting aid: Rotatable Roller Mount Expresso Type 04175470 Lifting aid load capacity: 70 kg Rotation via electric drive with stepless speed control Rotation range: 360° continuous Roller arms individually adjustable steplessly on linear guides Roller arm span min./max.: 1350 - 2050 mm (infinitely adjustable) Roller arm depth: 560 mm In the center of the roller arms is a workpiece holder (adjustment range 0 - 80 mm) Total weight: 150 kg good condition

Condition: used, Electric loading lift – pedestrian stacker, pallet stacker truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225P (lift2move) Serial No.: 19500S Year of manufacture: 2008 Type No.: Rated load capacity: 225 kg Lift travel: 1680 mm Lift height: 2200 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Lifting aid outreach: 861 mm Chassis length: 1020 mm Underclearance height: 90 mm Underclearance length: 600 mm Chassis design (front / rear): Ø 80 / 140 mm (2 fixed castors / 2 swivel castors) Overall length: 1400 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah Gbsdpfx Asflt Edjggsi - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Handheld remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge level indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in battery pack - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load pick-up flange as per EXPRESSO standard Special version: Lifting aid by GIESLER for radial fan SC-1000 CP XT (Tiger) - Lifting aid load capacity: 25 kg - Lifting aid can be swivelled 90° via manual hydraulic pump - Jaw opening between support jaws: 300 / 330 mm - Jaw opening between clamping rollers: 200 – 300 mm - Clamping via handwheel - Lifting aid net weight: 60 kg Total weight: 140 kg Very good condition

Condition: used, Electric Loading Lift - Mobilift for ergonomic handling of small loads Pedestrian stacker, pallet stacker Manufacturer: TransOrt Model: PRO 140 M Serial No.: P14012557 Year of manufacture: 2018 Rated capacity: 140 kg (with 400 mm outreach) Lifting stroke: 1380 mm Lifting cycles per charge: 140 kg x 1 m x 100 times Lift height: max. 2900 mm (underside of jib) Lifting speed (fast / slow): approx. 100 / 50 mm/s Outreach (load handling device): 890 mm Chassis length: 1100 mm Chassis width: 440 to 740 mm adjustable (internal measurement) Chassis height: 85 mm Underride length: 620 mm Chassis design (front / rear): Ø 80 / 125 mm (2 fixed / 2 swivel castors) Total length: 1450 mm Total width: 635 mm Overall height: 1980 mm Maximum height: 2980 mm (with lifting device extended) Battery capacity: 24 V / 18 Ah - Electric lifting drive via toothed belt with safety mechanism that stops the descent via freewheel as soon as the load contacts an obstacle. - Cable remote control with spiral cable and buttons for 2 lifting speeds - Control panel with emergency stop, on/off, and battery status indicator - Battery pack with quick-change system - 2 x 12 Volt, 18 Ah lead-acid batteries installed in battery pack - Integrated charger 24 VDC, 80 Watts - Manually maneuverable, steering castors with three-level parking brake - Continuously height-adjustable handle - Load pickup quick coupling TAWI system - Flange plate for quick coupling on the jib 30 x 340 mm with 5x M8 threaded holes Gbodpopcqdwofx Aggoi Net weight of loading lift: 75 kg Installed lifting aid: Counterbalance jib made of 60 x 40 x 3 mm rectangular stainless steel tube Lifting aid capacity: 50 kg Outreach to handle: 865 mm Hanging handle with knurled nut Net weight: 13 kg As new condition, unused ex stock 2 units available, price per unit

Condition: used, 2-axis removal machine, inserter, servo robot, workpiece gripper, pick-and-place machine, removal robot Removal device, handling device for presses, lathes, etc. GETECHA Type GL-20S No. 13836 Year of manufacture 10/2003 Z-axis travel 1900 mm Travel distance Y-axis 250 mm Travel speed Z-axis max. 1100 mm/sec. Travel speed Y-axis max. 227 mm/sec. infinitely variable travel speed in Y- and Z-axis via SMB servomotors - precise axis movement via linear guides - epis control system - Control panel opposite Gbedpfjharwyex Aggji - Control for conveyor belt, gripper magnets, bead breaker cylinder, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic - Mounted gripper with 3 lifting magnets, 3 pneumatic push-off cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours 25998 hrs. The system was used as an inserter/removal device on a press. Space requirement L x W x H 2900 x 1800 x 2000 mm Weight approx. 800 kg good condition

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads EXPRESSO type Lift & Drive 125 (lift2move) Series. No. 194679 Year of construction 2015 Type no. 1418242111 Nominal load capacity 125 kg Lifting distance 1450 mm Lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 530 mm Chassis length 890 mm Underride height 90 mm Underride length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Gbodpfeflt Ebsx Aggji Battery capacity 24 V / 7.2 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support U-profile for square according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm/ 4 M8 fixing holes at 50-60-50 mm intervals Mounted lifting aid: Special version from GIESLER LAM-DC conductor rail Load capacity of the lifting aid 40 kg Dead weight of lifting aid 24 kg Support rail can be moved sideways +-90 mm via linear guides (3 locking points left, center, right) Support rail can be swiveled +-38° (continuously lockable) Support rail with 2 clamps Distance between the clamps 550 mm Material clamping thickness 100 mm Material support dimensions W x D 650 x 155 mm Total weight 75 kg Very good condition

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Drill, HESS door handle. Single-unit with pneumatic clamps. For PVC and ALU windows. Gbsdpfov H E Alox Aggji

Condition: good (used), Year of construction: 2017, operating hours: 12,979 h, functionality: fully functional, machine/vehicle number: 002, arm reach: 11,000 mm, throat depth: 11,000 mm, total width: 3,000 mm, Equipment: cabin, Ideal machine for timber handling, vehicle has been regularly serviced, and was in daily operation until recently - Cummins engine, 118 kW - All-wheel drive and heavy-duty ZF axles - Special timber handling equipment: 11.0 m reach, 6.3 m boom, 4.6 m curved stick - Load stabilizer to dampen load oscillations during travel - Width: 3.00 m, operating weight: 27 tons - MaxCab comfort cab raised by 1 m, with air conditioning, joystick steering, sliding door, heated seat, air-suspended comfort seat, full protective grid - Hydraulic system with load-sensing technology, stick damping - Camera systems on right side and rear - Idle speed automation and ECO mode - Automatic oscillating axle lock - Automatic travel direction change via range sensor - Handrail on upper structure, removable - Bumper guard on and underneath the undercarriage - Sennebogen control and diagnostics system (SENCON) - Reversible fan for radiator cleaning Gsdjyric Dspfx Aggobi - 7 x LED work lights (boom, stick, cab, superstructure) - MISERA timber grab ML 92 (0.92 sqm) with Indexator rotator head