Used Treatment for sale (751)

Condition: new, Capacity: 3 to 20 m³ — the ideal “pocket” system for small and medium-sized producers Product Description: The Mobileplan is a high-quality, fully mobile drying kiln designed for maximum versatility. Engineered for rapid deployment and user-friendly operation, it can handle all wood species and greatly simplifies both timber drying and ISPM-15 pallet heat treatment without requiring a fixed installation. Plug-and-play setup: No permanent anchoring required. Easily movable by forklift or crane. Ultra-fast installation: Delivered pre-assembled and factory-tested; ready for operation in less than one day. Fully automatic operation: Automated control of drying cycles for true set-and-forget convenience. Heating options: Kdodjw Hf Adepfx Anysn - Electric - Hot water / steam - Gas Key advantages: - Compact, transportable design for genuine mobility - Installation within 24 hours – reduces set-up time and labor costs - Pre-assembled unit minimizes transport and assembly expenses - Suitable for drying both softwood and hardwood, as well as ISPM-15 compliant pallet treatment - Low running costs thanks to the modular plug-and-play system - Industrial-grade reliability in a compact form factor Mobileplan is the ideal solution for professionals seeking a premium drying system that offers mobility, rapid commissioning, and low operating overheads—perfect for workshops, small sawmills, or on-site operations.

Year of construction: 2021, condition: excellent (used), Richel irrigation and fertigation system Kjdpfeupwhzsx Anysdn with 4 vertical centrifugal pumps WILO type: Helix. Mixing unit : 12m3/h 1 wastewater treatment plant make : UVGERMI Type: 3XAD300. with water filter Hectron AG 100 1 fresh water tank capacity : 1.900L. 2 x water tank capacity : 3000L

Condition: used, Year of construction: 2014, machine/vehicle number: M298, Used filling monoblock AMS FERRARI 12/12/1 year 2014 The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Mechanical and production configuration The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable and continuous workflow for consistent production output. Operators disassembled the machine after it ran for approximately 200 hours, during which it bottled around 300,000 liters. Due to its low usage, the equipment shows minimal mechanical wear and preserves the integrity of key components. Production teams can, therefore, integrate this equipment into existing lines or use it as the base for new installations. In both cases, the monoblock ensures mechanical uniformity and high reliability. Rinsing section The rinsing module on the Used filling monoblock AMS FERRARI 12/12/1 year 2014 uses 12 mechanical grippers to handle the bottles. The system performs two rinsing treatments, ensuring internal sanitization before filling. In addition, the grippers support both 0.33 and 0.75 liter glass bottles, which makes the machine suitable for a wide range of beer formats. Thus, the rinsing system contributes to maintaining hygiene standards across all packaging sizes. Filling section The filling section uses 12 traditional isobaric valves with mobile nozzles. The system maintains pressure balance during filling and minimizes foam generation or CO₂ loss. This feature, in turn, protects product quality and prevents waste. Furthermore, the mechanical design ensures ease of cleaning and straightforward maintenance. These characteristics make the equipment ideal for beer bottling, where pressure control directly influences final product consistency. Kdedpfxow Ag Ndo Anyjn Operators rely on the mobile nozzle configuration to handle bottle variations with minimal adjustment. Also, the isobaric valves support repeatability across extended production cycles. Altogether, these features improve filling performance while maintaining operational efficiency. Capping section The capping module of the Used filling monoblock AMS FERRARI 12/12/1 year 2014 applies crown caps using two heads. The system supports both 26 mm and 29 mm caps and uses mechanical force to seal each bottle with consistent pressure. Unlike electronic systems, this mechanical configuration simplifies service and ensures predictable performance.

Condition: like new (used), mileage: 5,324 km, fuel type: diesel, STANDARD EQUIPMENT 4 ground support plates Aluminium basket: dimensions 1400 x 700 x 1100 mm Kdsdpfewbg Htox Anysn Automatic closure of the aerial part Command from the basket for acoustic warning Engine start/stop command from the basket C o n s o l f o r b a s t a n d f o r g o u t o f f o r c h a s Electric hour meter Cross control of open/closed stabilizers Automatic disengagement of power take-off Multi-axial device for visual control of the frame stabilization (bubble) Hydraulic system with differentiated filtering with high efficiency filters on both the delivery and return lines Manual emergency pump 230V electrical socket in the basket; Hydraulic basket rotation 90° + 90° Turret rotation 700° SAFETY DEVICES AS STANDARD Intelligent anti-collision arms - cabin Seat belt attachments on the basket Manual controls for emergency lowering Remote control, from the basket, of starting or stopping the engine and the vehicle horn. I n t e r b l o c c o s t a b i l i z a t o r i / a b r e a s Magnetic rotating flasher for the vehicle cabin SOCAGE SRL Via della Chimica 23, 41012 - Carpi Modena (Italy) P.Iva: 00370270365 3 4 Magnetic rotating lamp on the cabin Ladder for climbing onto the basket "Intelligent" cabin anti-collision sensor (without bypass activation) Frame flatness sensor (electronic inclinometer) Aerial part centering warning light Automatic stabilization from frame controls and from the basket Cataphoresis treatment with powder coating Flanged block valves Painting of the arms and pantograph transmissions: white RAL 9016 Frame painting: black RAL 9005 Painting heads and cylinders: blue RAL 5015 Socage warranty: aerial part 12 months Truck warranty: manufacturer's Hand pump for emergency descent Thermal protections on the electrical system Emergency stop buttons Flanged block valves on all cylinders Maximum pressure valves on the hydraulic system

Condition: excellent (used), Year of construction: 2021, operating hours: 21,000,575 h, functionality: fully functional, machine/vehicle number: 21000575, Peristaltic pump ALLMOVE ASH 15 GN-ID/1, year 2021, serial number: 21000575, very good condition Kdodswhmm Hspfx Anyen Peristaltic pumps of the ASH series from Allweiler have a unique design that allows them to work with the most complex liquid media. They are capable of pumping almost any fluid or very viscous substances, including aggressive agents or flows contaminated with solid or fibrous inclusions. Pumps of this type are widely in demand in many industries as an effective and reliable means of transporting liquids of various natures. The working unit is based on the following design elements: a thick-walled elastic hose for conducting liquids and a rotor with a shoe for pressing and pushing the flow. With this pumping principle, there is no turbulence or emulsification of liquids. Self-priming units, easy to set up and install, the possibility of reversible operation. Sealing of the drive with a sealing ring. The cooling agent is located directly in the pump body. Pumping liquids: highly viscous substances, containing abrasive, solid particles or fibres, gas-containing, aggressive agents. Application areas: wastewater treatment, chemical industry, paper production, food industry, agriculture, etc. Characteristics of ALLMOVE ASH 15 GN-ID • Volumetric flow: up to 60 m³/hour; • Supply pressure (PD): up to 16 bar; • Differential pressure: up to 15 bar; • Liquid viscosity: up to 100,000 mm²/s; • Permissible sizes of solid particles: 5 - 33 mm; • Permissible fiber length: 150 - 820 mm; • Liquid temperature: up to 80 °C; • Installation: dry, horizontal, on a support plate. Price Euro 3.300 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2010, mileage: 1,081 km, power: 15 kW (20.39 HP), first registration: 04/2010, overall weight: 1,787 kg, fuel type: electric, color: red, axle configuration: 4x2, maximum load weight: 1,080 kg, empty load weight: 707 kg, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, * German vehicle * Condition see photos * Ideal for large halls, parking garages etc... * Original only 1081 operating hours * Ideal for operation in large halls, logistics and parking garages as no exhaust fumes due to electric drive * Compact high-performance scrubber-drier for wet scrubbing and dry vacuuming in one operation * Combination machine with additional sweeping system, with dust extraction. * Hako B1100 sweeping and scrubbing machine * Area performance max. theoretically up to 7,000 m2 /h * Wet cleaning unit * Working width of brush head 102 cm * Brush diameter (2 brushes) 53 cm * Brush speed 210 rpm * Brush motor (2 pieces) 2 x 700 W * Brush contact pressure up to 540 N * Suction foot (working width) 126 cm * Fresh/dirty water 185/185 liters * Sweeping suction device: * Working width 138 cm * Electrical equipment * Rated voltage 36 V * Drive battery 36 V/640 Ah5 PzS * Drive motor 2000 W * Travel speed up to 8.0 km/h * Sweeping suction ? Fine and coarse dirt are picked up cleanly in the dry area in front of the scrubbing unit. * Wet scrubbing ? Even the toughest incrustations are removed cleanly by the rotating disk brushes * Dry vacuuming ? The pendulum-suspended, parabolically shaped squeegee leaves the floor immediately dry and ready to walk and drive on * Large tank capacity ? Long working times and short set-up times thanks to the flexible wall between the fresh and dirty water areas. * Dirt/water treatment system for multiple use of the water used for cleaning. ? Consistent cleaning quality in conjunction with the detergent dosing system. ? Enormous reduction in set-up times and water consumption. ? Optional use of fresh water or treated waste water. The fresh water tank always remains clean If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at Kjdjvhqiyepfx Anyodn We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: good (used), The SMT 400 2.4C is a top-class ceramic furnace for continuous operation, designed for a wide range of heat treatment processes. This high-tech device is a vertical convection convection oven that can be used for sintering, annealing, tempering, curing, heat sterilizing, aging and drying a wide variety of items. SMT 400 2.4C operates at temperatures from 350 °F (177 °C) to 2000 °F (1093 °C) and has a capacity of 16 cubic feet (454 l). The oven reaches extreme temperatures quickly and is characterized by exceptional stability Kdsdpfjq I Sgyox Anyon

Year of construction: 2001, condition: used, The line is suitable for high-quality mono film production with automatic thickness control, IBC cooling, and full surface treatment capability. Single-layer blown film extrusion line based on a 120 mm extruder with a 30:1 L/D ratio and water-cooled grooved feed section. Die Head • Model: TE594 • Die diameter: 350 mm • Die gap: 1.5 mm Metering System Ksdpfxjzcz Rus Anyjdn • 4-component gravimetric system (Octagon configuration) Cooling & Control • Plast-Control GmbH Procon automatic air ring & profile control • K-Design GmbH USBC-4-G2 IBC with WR-4 width control Corona Treatment • AFS G100S • Double treater station, 2600 mm width Take-up & Winding • 2800 mm take-up and winding unit • Oscillating take-up with gusset boards • Erhardt+Leimer GmbH web guiding system • 3” and 6” air shafts Recently replaced (less than 12 months of use, original Macchi parts): • Main motor • Gearbox • Screw & barrel • Mixing tip • Grooved feed section

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 74800 € 1413.72 € 40 to 2050 mm Y1 / Y2 / X und R Achse 200 mm 1700 mm 350 mm 440 mm servomotorischer Spindela 180 mm/s 10 mm/s 115 mm/s Kdjdpfx Asynm A Hjnyjn 650 mm 250 mm 1000 mm 7.2 kW 2600 mm 1450 mm 2650 mm 4400 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 " Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components optional equipment: Z1/Z2-axes CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Year of construction: 2020, condition: refurbished (used), Dryer conveyor for digital direct-to-garment (DTG) printing: ACE 950 by Chiossi & Cavazzuti Hot air dryer for DTG printing like new, excellent condition. Double belt conveyor. Year 2020. Textile oven almost new, overhauled and cleaned. Sold new for just over €15,000. Delivery not included - On request Characteristics of the Chiossi & Cavazzuti Ace 950 drying tunnel: - MAX POWER: 14 KW - FIELD OF APPLICATION: Textile digital printing, pre-treatment drying for dark and light textiles, water-based digital ink drying. - DRYING SYSTEM: Warm air circulation Kdodpfsr Rn Rvsx Anyon - DRYING SURFACE: 2000 x 950 mm - MAX PRODUCTION: 180 pieces/h Possibility of offering a complete set with a DTG Brother, Epson, Kornit printer and a Schulze PretreatMaker IV pretreatment machine depending on availability. Electric Modular Dryer Forced Hot Air System Drying Area: 2000x950 mm Specifically designed to cure and dry digital printing on fabrics, the massive advantage of these dryers is the high volume of forced air circulation: this facilitates and accelerates the evaporation of water-based digital inks with unmatched results on the finished garment in medium-long drying process.

Condition: used, mileage: 73,750 km, power: 375 kW (509.86 HP), first registration: 11/2015, overall weight: 35,000 kg, fuel type: diesel, color: white, axle configuration: 8x2, maximum load weight: 11,625 kg, empty load weight: 23,375 kg, tire size: 385/55/315/70 R 22,5, next inspection (TÜV): 11/2026, wheelbase: 4,500 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 16 m³, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, power assisted steering, seat heater, Vehicle location: en route / in transit, building: Haus, 1 comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, Telligent gearshift, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, lifting/lowering mechanism, differential lock, work lights, rotating beacon, storage compartment, leaf-air suspension, air and light connections for trailer hitch, last axle hydraulically steered, sunroof, remote control, green environmental badge. Kodjzbvdajpfx Anysdn Wheelbase: 4500 mm, body: Wiedemann Super 2000, capacity (sludge): 6,000 l (service water), 16,000 l (total), with water recovery, radio remote control 9t/7.5 tons front axles, disc brakes on front and rear axles, vacuum pump type: KW 4000, renewed in 2023 (1801), Aerokill system, hydraulic winch (350 kg) & rescue eye, meter counter for hose lengths, reversing camera, access ladder, filterless water treatment (sedimentation/centrifugal principle), stainless steel water tank (V2A, multi-chamber system) and an integrated fresh water system (approx. 800 - 1,000 l), high-pressure pump: Uraca P4-45-70, (1.025), large high-pressure hose reel: approx. 180 m high-pressure hose DN38, a small high-pressure hose reel: approx. 70 m high-pressure hose DN13, and a DUO coupling for power reduction, external pump system (rotary vane pump Jurop VL14) for work with large volumes of water. Pump output: 1,400 l/min, 2 bar, 7 kW, wardrobe with heating, hand washing basin (hot/cold), data subject to change, as vehicle is en route! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Year of construction: 1999, Format: 340 mm Equipment: VIVA 340 No. 85, equipped with: Kodpfx Aozcp D Njnysdn 1 paper unwinder (1 m diameter) 1 rotary die-cutting unit with magnetic cylinder, 14 Zoll format length 6 letterpress units with integrated register carriage and magnetic cylinder (14 Zoll format length) 1 Grated exhaust system (600 mm diameter) 1 Winding system (700 mm diameter) 1 Longitudinal cutting/trimming unit 1 UV flexo coating unit with magnetic plate cylinder 7 I.S.T. UV dryers with CMK reflectors and provision for water cooling 1 Rotometrics Hydrajack pressure control system for the main die-cutting unit 1 BST ProMark video web inspection system (model Euroscope) 1 Preparations for COVID-19 treatment 1 Plate punching machine 1 Plate bending machine

Condition: new, functionality: fully functional, power: 17.9 kW (24.34 HP), fuel type: diesel, color: yellow, operation weight: 575 kg, Year of construction: 2026, Equipment: trailer coupling, Kaeser Mobilair M 27 PE Compressor – NEW Kaeser Mobilair M 27 PE Compressor – NEW | 1.6 m³/min flow rate | 14 bar operating pressure | Kubota diesel engine D1105 | mobile construction compressor | compressed air treatment (A) NK/ZK | unbraked Technical data: Manufacturer: Kaeser Model: Mobilair M 27 PE Condition: NEW Operating pressure: 14 bar Flow rate: 1.6 m³/min Engine: Kubota diesel engine D1105 Engine power: 17.9 kW Tank capacity: 40 liters diesel Compressed air connection: 2 x G 3/4" Operating weight: 575 kg Chassis: with drawbar (for mobile use) Starting system: Electric start Highlights & Features: - Powerful construction compressor for professional applications - Compressed air treatment (A) NK/ZK - Robust Kubota diesel engine D1105 – reliable & durable - Compact design – ideal for mobile applications - High operating pressure – suitable for special applications - Maintenance-friendly design – easy access to all components - Stable chassis – flexible for use on construction sites - Made by Kaeser – premium quality in compressed air technology Kdsdpfx Aszbzv Ujnyen Areas of application: ✓ Construction & civil engineering ✓ Road construction & renovation ✓ Fiber optic & cable laying ✓ Compressed air tools (earth augers, rotary hammers, demolition hammers, etc.) ✓ Municipal applications & construction site operations Location: Warehouse D 46514 Schermbeck (North Rhine-Westphalia) – inspection & collection possible Delivery throughout Germany & internationally upon request Pricing from warehouse at Maassenstraße 91, D 46514 Schermbeck (Wesel district) All information without guarantee. Errors and prior sale excepted. Prices plus VAT / VAT excluded More compressors available! Also Kaeser M 31, M 50, M 57, etc. in stock ➡️ New & used machines, accessories & spare parts Buy Kaeser compressor | M 27 PE NEW | Construction compressor 1.6 m³/min | 14 bar | Kubota diesel engine D1105 | mobile compressed air compressor | Kaeser quality Your reliable partner for construction compressors & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Request now & secure immediately available new products! If required, we will be happy to arrange a virtual inspection of the machine via video call.

Condition: new, axle configuration: 3 axles, loading space length: 12,355 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 608 m³, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: Aluminium * Chassis type: V-chassis * Kingpin load (national) (t): 12 * Axle load (national) (t): 8 * Axle spacing (mm): 1310-1310 * Fifth wheel height (mm): 1150 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 110 * Internal height front (mm) (IHF): 2165 Kdedpfxsy Dmv Ho Anyjn * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 11364 * KC-Value: 0800 * Overall width (mm): 2550 * Volume (m³): 60.8926 * Wheelbase (mm) (WB): 7470 * Overall length (mm): 12355 * Brake version: disc brake * Offset (ET): 120 * Option 1st axle: with lift axle and starting aid * Activation of starting aid via button in truck (mounting of button not included in standard equipment) and by pressing the brake pedal three times * Option 3rd axle: with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * ECAS air suspension with raise and lower valve * Automatic lowering of air suspension during tipping process, can be manually locked via Smartboard as well as switch mounted to chassis * Pneumatic coupling head: European palm coupling * Control console: EBS control on left-hand side in direction of travel, in front of axles * Standard Smartboard * Landing gears: Weweler * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional application * TPMS sensor type: Rim-mounted sensor * Wheel nut caps: Chrome with STAS logo * Lighting type: ECOLED III - with STAS logo * Working light position (operated by switch): 2x LED reverse lights at rear, left and right (on lamp bracket) * Working light position (operated by switch): 2x LED reverse lights at the front, left and right, near landing gears * LEDs in door end crossmember: 2 x 3-function LED * Operation underrun protection: manual * Mudflaps underrun protection: Black with STAS logo * Cylinder tipping angle normal: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 8130 * Max. tipping cylinder pressure: 250 * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: Rotary coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Mudflap type: Clear Pass mudguard * Toolbox: 860x520x500 * Air connection: left side in direction of travel, on lamp bracket * Aluminium access ladder: 3 m * Two plastic chocks * Chassis-body catch device: Rubber polyps Body: * Front wall angle (°): 90 * Rear wall angle (°): 90 * Lower chord profile inside angle (°): 90 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads fitted below floor cross-members * Rear wall type: combination door * Rear wall: aluminium * Combination door type: 1/2 - 1/2 with pivoting door end crossmember * Door end crossmember: pivoting design * Slide position: 2 units, left + right * Additional rear wall locking: pneumatic double-acting * Operation of additional lock: automatic during unloading, additionally manual via control on side of instrument panel * Number and position of roof bows: 3 mid bows (evenly spaced) and 1 rear bow (at back) * Position and type of roof bow hinge: right

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 476 m³, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: aluminium * Chassis type: V-chassis * King pin load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * SAF axles * Offset (ET): 120 * Option: 1st axle with lift axle and traction assist * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR) 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, manually lockable via Smartboard and chassis switch * Pneumatic coupling head: European palm coupling * Control console: EBS operation on driver's side before the axles * Standard Smartboard * Air and electrical console, passenger side * Landing gears: Weweler steel gear landing gears, type Weweler, with compensating feet, one-sided operation, and 2-speed function * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional application * TPMS sensor type: rim-mounted sensor * TPMS sensor included * Chrome wheel nut covers with STAS logo * Working lamp position (operated by switch): 2 LED reversing lights at the rear, left and right, mounted on the lamp bar * Working lamp position (operated by switch): 2 LED reversing lights at the front, left and right, mounted near the landing legs Kdsdpfx Aoy Dmvaonyon * LEDs in door end cross member: 2 x 3-function LED * Underrun protection: manual operation * Tow hooks: 2 pcs left and right * Mud flaps underrun protection: black with STAS logo * Cylinder tipping angle, normal: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Max. tipping cylinder pressure: 250 * Cylinder stage surface treatment: standard finish * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 1 * Hydraulic coupling gender: female * Hydraulic coupling hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of mud flaps on mudguard: 2 pcs * Mudguard mud flap type: asphalt * Toolbox: 860x520x500 * Aluminium ladder 3 m - passenger side * Broom and shovel holder * Ferry lashing rings * 2 lashing rings at the rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber buffer Body: * Front wall tilt (°): 20 * Rear wall tilt (°): 90 * Inner lower belt profile tilt (°): 45 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm aluminium - 110 Brinell * Rubber pads installed under floor crossmembers * Rear wall type: combination door * Combination door type: 2/3 - 1/3 with swiveling door cross member * Door leaf opening: right leaf opens first * Swiveling door end cross member * Hinge type: double door hinge * Slide gate: rectangular design * Slide gate position: 1 piece, centred * Grain outlet / dust bag: 1 grain funnel incl. dust bag * Smooth rear wall surface * Fastening of opened door leaves secured by chain * Rear wall gasket with standard rubber seal * Extra aluminium round profile

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: Aluminum * Chassis type: V-chassis * Fifth wheel load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * Axles: SAF * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, can be manually locked via Smartboard and switch on the chassis * Pneumatic coupling head: European palm-type coupling * Operation console: EBS controls on the left in direction of travel, ahead of the axles * Standard Smartboard * Air and electrical console on the right in direction of travel * Landing gears: Weweler steel gearbox-type landing gears with compensating feet, single-sided operation and 2-speed * Tire dimension: 385/65R22.5 * Tire pressure monitoring: Wabco TrailerPulse * Rims: Alcoa Dura-Bright * Tire type: Regional distance * TPMS sensor type: Rim-mounted sensor * TPMS sensor * Chrome lug nut covers with STAS logo * Work light position (operated by switch): 2 LED reversing lights at rear, left and right in direction of travel, mounted on lamp bracket * Work light position (operated by switch): 2 LED reversing lights at front, left and right in direction of travel, mounted at landing gear area * LEDs in door end cross member: 2 x 3-function LED * Underrun protection operated manually * Tow eyes: 2 each left and right * Splash guards on underrun protection: Black with STAS logo * Cylinder tipping angle normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 bar * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: Swivel coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of splash flaps on mudguard: 2 pcs * Mudguard splash flap type: Asphalt * Toolbox: 860x520x500 mm * Aluminum access ladder, 3 m - right side in direction of travel * Broom and shovel holder * Ferry lashing rings * 2 lashing eyes at rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber polyp Body: Kdsdsy Dmvmopfx Anyen * Front wall angle (°): 20 * Rear wall angle (°): 90 * Inner lower belt profile angle (°): 45 * Front wall: 4 mm (aluminum) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads installed below floor cross members * Rear wall: Kombi-door type * Kombi-door type: 2/3 - 1/3 with swiveling end cross member * Door wing opening: right wing opens first * End cross member of door: swiveling design * Hinge type: with double door joint * Slide: Rectangular design * Slide position: 1 piece in center * Grain discharge / dust bag: 1 piece grain chute incl. dust bag * Rear wall: smooth surface * Door wings secured open with chain

Condition: new, Year of construction: 2025, charge load / / Control / VKMK machines are combined machine systems that enable many surface treatment processes to be carried out in a single machine group under PLC control. These machines were specially developed for the ammunition industry and are manufactured according to the process requirements. From chip conveyors to vibratory grinders to dryers. Everything can be manufactured and in any combination. An automated system for the machining of a wide variety of parts. Kjdpfx Anjy S Drhsysdn The machines of the VKMK series are manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Turkey.

Condition: new, Year of construction: 2023, weight 390 kg height 1000 mm Ksdjy S Dn Nepfx Anyjdn 0 204 l length 1300 mm revolutions per minute 1500 U/min voltage 380/50 V/Hz engine output 1,6 kW The VKT-200 is a linear vibratory finishing machine and is used for the surface treatment of parts made of all types of metallic and non-metallic materials. The machines in this series are generally used for long and large-volume parts. With the help of movable partitions in the machine, sensitive parts can be processed without being damaged by friction from other parts. Optional accessories - Pneumatic sound insulation hood - Speed control - Dosing pump - Magnetic valve - Electrical control panel stand - Rinsing water pipe system The pictures are for orientation only. The optional accessories can be surcharge. Gerd Wolff reserves the right to change the colour and technical data of the machines. The VKT 200 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: used, mileage: 95,598 km, power: 125 kW (169.95 HP), first registration: 11/2021, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle number (for inquiries): 60 Mercedes-Benz Sprinter 317 CDI L2H2. 1st owner. Paint code: * 7708 Paint color Silver Grey MB 7708 Interior trim: * VF7 Fabric Maturin black Equipment: * AR5 Axle ratio I = 4.727 * BH2 Control code: Hydro aggregate variant 1 * BK2 Control code: Brake configuration 2 * C6L Multifunction steering wheel * C907 - * CB7 Stabilization level I * CL1 Steering wheel adjustable in tilt and height * CW2 Vehicle lowering omitted * D03 High roof * D13 Roof rack mounting rails * D51 Full partition with window * E07 Hill start assist * E1D Digital radio (DAB) * E3M MBUX multimedia system with 7-inch touchscreen * E43 13-pin trailer socket * ED4 AGM battery 12 V 92 Ah * ES0 Jump-start connection * EW6 Preparation for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F3F Passenger-optimized gearshift console * F68 Exterior mirrors heated and electrically adjustable * F907 - * FF5 Overhead storage above windscreen * FJ4 Storage compartment under dashboard * FKA Panel van * FY7 Multi-button radio remote control * GD8 6-speed manual transmission ECO Gear * H1B Tachograph control at front under headliner * H21 All-round heat-insulating glass with band filter on windscreen * HH9 Semi-automatic climate control TEMPMATIC * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IE0 Model series C907 VS30 RWD * IG4 Standard * IG5 Basic * IH6 Headunit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) Kjdpfxey Ha Ihe Anyodn * IL5 Left-hand drive * IR4 Wheelbase 3665 mm (BM-defining code) * IT4 3.5-ton version * J10 Speedometer km/h * J55 Seat belt warning for passenger seat * J58 Seat belt warning for driver's seat * J65 Outside temperature display * JA8 Crosswind assist * JD6 Intelligent tachograph EU * JG0 Shift point indicator * JH3 Communication module (LTE) for digital services * JI7 Initial maintenance interval 60,000 km * K13 Main tank 71 liters * KP7 SCR generation 4 exhaust gas treatment * L Left-hand drive * L65 Ceiling light in load/passenger compartment with door contact * L94 Parking light omitted * LA2 Headlight assistant * LB1 Side marker lights * LB5 3rd brake light * LC2 LED strip light in cargo area * LE1 Adaptive brake light * LX5 Europe * M60 Alternator 14 V/250 A * MJ8 ECO start-stop function * MS1 Cruise control * MT2 Emission standard Euro 6D-TEMP N1 * MU5 Engine OM654 DE 20 LA 125 kW (170 hp) * Q11 Longitudinal member reinforcement * QA7 Towbar for increased trailer load 3.5 t * QA9 Rear step on rear door for towbar * R65 Spare wheel carrier at rear of frame * R87 Spare wheel * RF1 Tire brand Continental (10) * RH2 Tire size 235/65 R16 C * RM0 All-season tires * RS3 Steel wheels 6.5 J x 16 * RX5 Wheel manufacturer Maxion Wheels * S02 Driver's seat * S22 Armrest for driver's seat, ISO-fix (child seat anchorage system) * S23 Passenger seat double bench * SA5 Driver's airbag * SK2 Driver's seat occupancy recognition * T16 Sliding door right * T77 Entry grab handle at load compartment sliding door on bulkhead * T86 Entry grab handle on rear right corner post * V42 Lashing rails on side wall at belt line * V43 Wooden floor * V94 Cable duct on side wall * VA3 Interior lining cargo area up to roof

Condition: used, mileage: 164,105 km, power: 100 kW (135.96 HP), first registration: 01/2022, fuel type: diesel, overall weight: 3,050 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2022, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number (for enquiries): 46 Mercedes-Benz VITO 114 LONG 9G-TRONIC 4X4 Paint Code: Paint Colour Arctic White MB 9147 Interior Trim: * VF4 Caluma Fabric, black Equipment: * 219L Hamburg * 9147 Paint Colour Arctic White MB 9147 * A1O Rear axle make IFA * BB7 CO2-optimised brake system * BH1 Hold function * C447 - * C70 Pedestrian protection * CF0 Basic suspension * CL1 Steering wheel adjustable in tilt and height * CL4 Multifunction steering wheel with trip computer * D51 Full partition with window * E07 Hill start assist * E1D Digital radio (DAB) * E2R Radio generation 2 * E34 Buffer battery for start process * EA4 Audio 40 * ED4 AGM battery 12 V 92 Ah * EL8 Two-way loudspeakers front * EW6 Pre-installation for Remote Services Plus * EY2 Pre-installation for Live Traffic Information * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * EZ5 Park Package * EZ8 PARKTRONIC * F447 - * F61 Interior mirror * F68 Exterior mirrors heated and electrically adjustable * FF1 Centre console with stowage compartment * FKA Panel van * FR1 Non-retractable reverse camera * FR8 Reverse camera * FY7 Multi-button remote control * FZ9 Two additional main keys * G43 9G-Tronic * H16 Seat heating for driver * H20 All-round heat-insulating glass * HH9 Semi-automatic air conditioning Tempmatic * HI1 Climate zone 1 (cold/comfort) * I52 HU Map Data Country Set 3 * IB6 Model series C447 Vito/V-Class * IG5 Basic * IK0 Complete vehicle * IL1 Domestic (Germany) * IL4 Region EU/EFTA * IL5 Left-hand drive * IN2 Wheelbase 3200 mm, long overhang * J55 Seat belt reminder for passenger seat * JF1 Rain sensor * JH3 Communication module (LTE) for digital services * JK3 Instrument cluster with pixel-matrix display * JW8 Attention Assist * JX2 Maintenance interval 40,000 km * KB5 Main fuel tank 70 litres * KP7 SCR exhaust treatment generation 4 Kjdpfxjxlw E So Anyjdn * L Left-hand drive * L16 Halogen fog lamps * LA2 Light assistant * LC2 LED light strip in cargo area * LC4 Comfort roof control unit * LE1 Adaptive brake light * LX5 Europe * M40 Alternator 14V/200A * MG9 Alternator management * MJ8 ECO start/stop function * MK8 Speed limiter 210 km/h * MS1 Cruise control * MT6 Emission class Euro 6D N1 * MU2 Engine OM654 DE 20 LA 100 kW (136 HP) * MX0 BlueEFFICIENCY package * R21 Wheel size group 1 * RF1 Tyre make Continental (10) * RG7 Tyres 225/55 R17 * RM1 M + S tyres * RS7 Steel wheels 6.5 J x 17 * S00 Airbag control unit generation AB12 * SB1 Comfort driver's seat * SB2 Comfort passenger seat * SE5 Lumbar support for driver's seat * SW3 Passenger airbag removed * V43 Wooden floor * VA2 Interior trim cargo area up to roof height (wood) * VF4 Caluma fabric, black * VV9 Roof frame fixing points * W65 Tailgate * W70 Privacy glazing in rear, black glass * W78 Window in tailgate/rear door with wash/wipe system * WM0 Control code model update * X30 Registration certificate part 2 * X99 Manufacturer Mercedes-Benz AG * XC9 COC papers * XG6 GVW variant 2,800 kg * XM0 Model update * XM8 Control code development * XN1 Model year change G1-II * XO9 Mercedes-Benz Mobilovan with DSB and GGD * XU1 Signs / print in German * XW9 Control code

Condition: used, For sale: Complete washing and flotation system with water post-treatment. This system is used to remove and dewater sludge (mud, fine sand, clay, and other solid materials) from wastewater. Manufacturer = Tecnicas Hidraulicas S.A. (TH), a Spanish company specializing in wastewater treatment and sludge dewatering systems. Consisting of: - Washing drum: 2.4 m diameter; Length 4.5 m + 1.7 m - Construction material: Creusabro 4800 steel, 12 mm thick (Similar to Hardox) - Separation and flotation drum with 2 dewatering screens, collection tanks, and associated Warman pumps = top quality. - Lamella thickener tank, 4.5 meters diameter, with pump - EPS mixer - Archimedes screw - Water tank / reservoir, 10,000 liters - All necessary and associated Warman pumps and conveyor belts. Applications: Mining industry Dredging operations / dredged sludge Concrete industry Kdjdpfxozbrp Se Anyon Glass industry

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: Multiple on request, Continuous Potato Peeling Line – Tong Engineering & Sormac Equipment This continuous potato peeling line combines reliable Tong Engineering handling equipment with efficient Sormac peelers to create a complete solution for high capacity potato processing. Designed for consistent product flow and dependable performance, the system is well suited to processors looking to streamline their peeling operation. The equipment moves potatoes smoothly from cleaning and peeling through inspection, treatment, and final product safety checks. With trusted machinery from Tong and Sormac, this line delivers both efficiency and durability in demanding production environments. Equipment Included Tong Engineering De-Stoner The process begins with a Tong de-stoner, which removes stones, soil, and heavy debris from incoming potatoes. This stage protects downstream equipment and ensures cleaner product enters the peeling process. Two Sormac Continuous Peelers The line includes two Sormac continuous peelers designed for high capacity peeling while minimising product loss. These machines efficiently remove potato skins while maintaining consistent throughput for industrial potato processing operations. Tong Engineering Surge Tank A Tong surge tank regulates product flow between processing stages. This buffer helps maintain a steady supply of potatoes through the system and prevents bottlenecks during production. Tong Roller Inspection Table The Tong roller inspection table allows operators to visually inspect peeled potatoes and remove defects. Rotating rollers spread the product evenly, improving visibility and making quality control easier. Tong Dip Tank with Dosing Unit A Tong dip tank with integrated dosing unit allows potatoes to be treated with anti-browning or preservation solutions. This step helps maintain product appearance and supports shelf life after peeling. Loma IQ3S Metal Detector Kdjdsytn H Dopfx Anysn The final stage of the continuous potato peeling line is a Loma IQ3S metal detector, which checks the finished product for metal contamination and helps meet food safety standards. Key Benefits Complete continuous potato peeling line for commercial processing Combination of Tong Engineering handling equipment and Sormac peelers Designed for efficient stone removal, peeling, inspection, and treatment High throughput suitable for industrial potato processing Integrated metal detection for product safety Reliable equipment built for demanding production environments Suitable Applications This equipment is ideal for: Potato processing facilities Fresh produce packing operations Ready meal manufacturers Vegetable processing plants Enquiries If you are interested in this continuous potato peeling line, please get in touch for further information, pricing, and availability. The system offers a dependable solution for large-scale potato processing. Five individual lines available We hold a wide range of new and used food processing machinery in stock, some of which may not be showing on our website. If you have any additional requirements please get in touch

Year of construction: 2018, condition: used, The year of manufacture refers to the final acceptance of the system; individual components may differ in age. Workpiece dimensions up to a maximum of L x W x H: 8,000 x 2,000 x 2,000 mm, maximum crossbeam load: 2,000 kg/carriage, material: steel. Pos. 1: Washing booth, Jumbo-Clean with stainless steel interior for degreasing/phosphatizing of steel, either automated or with manual spray lance. Pos. 2: 1 set of belt filters. Pos. 3: 1 automatic spray ring for the Jumbo-Clean washing booth, including a central lance. Kdodpfxsy T Nzdj Anyjn Pos. 4: 1 fresh water treatment system. Pos. 5: 1 manual conveyor with 1 electric cross-travel carriage. Pos. 6: 1 lifting/lowering station, Jumbo-Lift 2000, integrated into the cross-travel carriage. Pos. 7: 1 indirect gas-heated flash-off oven/powder drying oven/wet coating drying oven, door opening W x H: 2,800 x 3,100 mm, clear length: 9,500 mm, overall W/H/L approx.: 4,000/5,000/10,000 mm. Pos. 8: 1 end-face powder coating extraction system for an on-site painting booth for spraying and drying operations. Pos. 9: 1 manual coating unit, OptiFlex(R)2. Pos. 10: 1 structure for on-site steel construction. Pos. 11: Control cabinet.

Condition: excellent (used), functionality: fully functional, power: 104 kW (141.40 HP), overall weight: 2,400 kg, fuel type: diesel, axle configuration: 1 axle, emission class: euro5, Year of construction: 2019, operating hours: 511 h, Delivery rate: 10.9 to 9.7 m³/min Engine manufacturer: John Deere 4045HCF05 Engine power: 104 kW Emission stage: V Kdodpey Sz Sljfx Anysn Compressor control: Xc 2003 Dimensions: 4,940 x 1,807 x 1,960 mm (L x W x H) Fuel tank / AdBlue capacity: 168 / 17.6 liters Maximum weight: 2,400 kg Compressed air treatment system consisting of: compressed air aftercooler, water separator, and PD filter Operating pressure: 5 to 14.2 bar Hitching device: car trailer hitch ball coupling 50 mm / DIN towing eye

Condition: excellent (used), Year of construction: 2015, - Continuous flow, suspended part shot blasting system, specifically designed for automatic, continuous surface treatment of suspended workpieces. - Suitable for applications such as derusting, descaling, deburring, fine finishing, final shot blasting, or roughening. - Flexible workpiece suspension. - Efficient blasting technology through high-performance turbines. - Automatic continuous operation. - System dimensions: 12.75 x 6.6 x 10.42 m (W x H x L). - Door opening dimensions: 2.0 x 2.0 m (W x H). - Workpiece dimensions: max. diameter 2,100 mm, max. height 2,100 mm, max. hook load 2,000 kg, max. part temperature 80 °C. - Abrasive: round F16-20. - High-performance turbines, type 3.6, quantity 06. - Impeller diameter 380 mm. - Blade width 55 mm. - Number of blades per turbine: 6. - Drive power per turbine: max. 11 kW. Kjdpoy T H Ihofx Anysdn