Used Dnc for sale (127)

Condition: good (used), Year of construction: 2015, turntable diameter: 1,640 mm, Used pallet wrapping machine Brand: DNC Packaging Model: Fenix PLC Year: 2015 Features: - Rotating platform pallet wrapper/stretch wrapper for palletized loads. - Control system: Controlled by a programmable logic controller (PLC), which allows for configuring wrapping cycles (upper/lower wraps, film tension, automatic up/down movement via a height detection photocell). - Standard capacity: Platform diameter: 1,640mm. - Maximum load weight: 2,000 kg. - Maximum packaging height: Mast for loads up to 2,200mm. Ndedpfez Ndgzjx Akqoc Includes: - Complete perimeter installation with masts, rails, and barriers. - All film rolls and packaging covers shown in the photographs.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 260 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK, number of axes: 5, This 5-axis Monforts DNC 5 was manufactured in 2000. It features a twin-spindle configuration with dual tool turrets, enhancing productivity and efficiency. The machine includes an integrated chip conveyor for effective chip management and a mounted top extraction system for optimal air filtration. If you are looking to get high-quality turning capabilities, consider the Monforts DNC 5 turn-mill centre we have for sale. Contact us for further details. Ndodpfsz A Utlsx Akqjc - Control Unit: SIEMENS SINUMERIK- Machine Configuration: Twin-spindle / Dual-chuck CNC Lathe with dual tool turrets and central partition wall Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: repair required (used), functionality: not functional, Year of construction: 1993, oil tank capacity: 390 l, input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, pressing force: 150 t, table length: 3,550 mm, type of input current: three-phase, For sale is a robust hydraulic EHT bending press, type EHPS 15-35, manufactured in 1993. The machine comes from an industrial setting and, after repair, is ideal for sheet metal processing, metalworking, metal construction, contract manufacturing, or as a production machine for medium to heavy bending operations. The bending press has a working length of 3,550 mm and a pressing force of 1,500 kN, or approximately 150 tons. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive set of upper and lower tools as well as special tools. Important note regarding the current condition: The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot currently be performed. The error must be bypassed or professionally repaired. After this error is resolved, the machine should be fully operational again. Therefore, it is being sold explicitly as a used industrial machine in need of repair for restoration purposes. The machine is in used condition, with signs of wear consistent with its age. There are signs of use, paint damage, and dirt, as shown in the pictures. The control cabinet, the control system, the tools, and the machine components are documented in the photos. An on-site inspection is possible and highly recommended, subject to prior arrangement. A functional test is only possible to a limited extent, as there is currently an error during the initialization of the stops. Equipment / Scope of delivery • Hydraulic CNC bending press EHT EHPS 15-35 • Cybelec DNC 880 control system • Existing upper tools / punches • Existing lower tools / dies • Special tools included • Front supports / material supports • Foot switch • Side protection areas / safety guards • Robust EHT industrial design • Large working length of 3,550 mm • Pressing force approx. 150 tons Inspection / Collection The machine is located in an industrial hall and can be inspected by appointment. Disassembly, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be provided if necessary. Sales note Preferably sold to commercial businesses. No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been provided to the best of our knowledge based on the nameplates and available information. Ndedpfx Akez E U Dpsqoc

Condition: used, Year of construction: 2002, Technical details: turning diameter: 370 mm Ndodpfx Asxlrkcjkqec turning length: 200 mm Spindle 1 RPM: 4000 1/min control: Siemens 840 D Spindle 2 RPM: 4000 1/min power capacity: L / R 18/24 kW max. torque on the spindle: 630 nM C-Axis: 0,001° Turret No.1 stations / rotary tools: 12/12 VDI 40 Turret No.2 stations / rotary tools: 12/12 VDI 40 turning speed range - milling: 3000 1/min power capacity - milling spindle: 8,8 kW torque rotary tools: 28 Nm Bar capacity spindle 1: 85 mm total power requirement: 65 kVA weight of the machine ca.: 13 t dimensions of the machine ca.: 5,7x2,4x2,1 m Travel x1: 260 mm Travel x2: 260 mm Travel Y1: 600 mm Travel y2: 600 mm Accerories Chip conveyor .tools Parts and total counter Automatic separation wall Standard set of tool holders Power Chuck 2 x 250 mm manual tool eye l & r High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools. *

Condition: like new (used), machine/vehicle number: 22-01050762, functionality: fully functional, Used divider plate Brand: Meca-Divimek 160mm 3-jaw chuck Ndedpfx Aksr Epa Ieqoc It has a point. Brake torque: 30kg Servomotor: 2000 rpm Weight: 70kg Maximum load admitted horizontally: 150kg Vertical position at 200mm: 75kg (With counter-point: 150kg) Servo drive used Brand: Fagor Automation Model: ACS-10 S/N: 22-01050762

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 2,375 h, stroke length: 160 mm, operating speed: 10 mm/s, reverse speed: 140 mm/s, overall weight: 12,500 kg, total length: 4,400 mm, total width: 1,800 mm, total height: 2,950 mm, input voltage: 400 V, input frequency: 50 Hz, pressing force: 175 t, table length: 3,400 mm, table width: 3,400 mm, type of input current: three-phase, Equipment: CE marking, BOSCHERT – GIZELIS G-BEND PLUS 3175 CNC Controlled Press Brake Machine available for collection in June. 1. Features and Capabilities: ■ Modern machine frame design ensures an optimal installation footprint. ■ Compact build with high operational safety, resistant to external influences. ■ Reinforced, heavy-duty sidewalls for added structural rigidity. ■ Maintenance-free, dual ram guiding system, independently controlled for Y1 and Y2 axes. ■ Advanced hydraulic system featuring a proportional multi-valve configuration and pressure management, equipped with an energy-efficient STOP&GO function during operation. ■ High-precision, dual active ram position measurement system ensuring top bending accuracy. The system includes a minimum of two independent, highly accurate linear encoders installed on mounts decoupled from the frame. Ram positioning accuracy is +/- 0.01 mm. Provides full electro-hydraulic frame synchronization (Y1, Y2). ■ Ram parallelism to the bending axis is maintained by a double roller guide on both sides of the internal frame section, supplemented by crosswise ram reinforcements. ■ Cylinders and pistons are made from high-strength steel with chrome-plated piston surfaces. ■ The machine and its accessories are intuitive to operate and designed for easy maintenance. ■ Provisions are made for future upgrades with new technical innovations. ■ All digital axis drives are powered by premium, maintenance-free AC servomotors. ■ The rear backgauge utilizes dual linear guides for precise bilateral movement. ■ An extensive and versatile tooling portfolio enables flexible processing of a wide range of workpieces. ■ The design and construction comply with EU health and safety directives in line with the CE mark. The machine is CE-certified and built according to Directive 2006/42/EC. 2. Technical Data: Model/data 3175 Press force 175 ton Max. working length 3,400 mm Working length between uprights 3,050 mm Throat depth in side frames 400 mm Opening between table and ram 615 mm Ram stroke 350 mm Maximum X-axis backgauge travel 1,200 mm Ram speed: Y rapid traverse (unloaded) 0-160 mm/s Y working (under load) 10.0 mm/s Y return 0-140 mm/s Electrical Specification (others on request): Voltage 400 V Frequency 50 Hz Motor (flange-mounted AC, incl. controller) 22 kW Approximate Dimensions: Machine height approx. 2,950 mm Machine width approx. 1,800 mm Machine length approx. 4,400 mm Max. weight (with accessories) 12,500 kg 3.6 5-Axis CNC Backgauge System: X-ΔX-R-Z1-Z2 X axis: Parallel movement of the backgauge beam ΔX axis: Adjustable backgauge finger for angled (skew) bends. Adjustment range +/- 175 mm (total 350 mm). R axis: Vertical adjustment of the backgauge beam Z1, Z2 axes: Automatic lateral travel of backgauge fingers along the beam. All axes are powered by AC servo drives. Two backgauge fingers on the beam with integrated sheet support feature. All axes are CNC controlled by the DNC system. Tooling: Punch: TOP.175.60.R08 60° R0.8MM H=175 L=5x525 mm TOP.175.60.R08 60° R0.8MM H=175 L=1x495 mm Nodpfx Aksy Am Nqjqodc Segmented: 25/30/35/40/45/50/100/170 mm TOP.175.60.R08 60° R0.8MM H=175 L=1x500 mm Segmented: 100/300/100 mm Die: Multi-V die M.460.60 V=10-16-22-35 (60°), L=4x835 mm

Condition: good (used), functionality: fully functional, Year of construction: 2001, control type: CNC control, controller manufacturer: CYBELEC, controller model: DNC 800, working width: 3,050 mm, stroke length: 220 mm, throat depth: 410 mm, distance between stands: 2,610 mm, number of axes: 8, type of crowning: CNC-controlled, back gauge adjustment: CNC-controlled, overall weight: 10,500 kg, total length: 4,200 mm, total width: 2,400 mm, total height: 2,500 mm, power: 9 kW (12.24 HP), pressing force: 125 t, Equipment: CE marking, documentation/manual, lower tooling, upper tooling, Hydraulic crowning CN CYBELEC DNC 800 CN axes: Y1/Y2/X1/X2/Z1/Z2/R1/R2 Hydraulic clamping of punches Segmented tooling MACHINE OFF GROUND Specifications Bending length: 3050 mm Power: 125 tons Ndodpfx Akswrx Tmjqjc Throat depth: 400 mm Distance between uprights: 2610 mm Ram stroke: 220 mm Machine dimensions L x W X H: 4200 x 2400 x 2500 mm Weight: 10500 kg Year: 2001 Main motor power: 9 kW

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Ndsdpfjz Hwhyjx Akqec Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T

Condition: used, functionality: fully functional, Year of construction: 2002, stroke length: 350 mm, throat depth: 500 mm, operating speed: 80 mm/s, reverse speed: 90 mm/s, overall weight: 16,500 kg, total length: 4,650 mm, total width: 2,150 mm, total height: 3,200 mm, input voltage: 380 V, pressing force: 160 t, clearance between the columns: 3,300 mm, table width: 4,175 mm, Equipment: CE marking, documentation/manual, safety light barrier, CYBELEC DNC 80 control system 6 controlled axes: Y1-Y2-X-R-Z1-Z2 Active hydraulic compensation LASER safety barriers Standard tool kit Ndjdpfx Akszybrroqjc CE marking

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, stroke length: 200 mm, pressing force: 100 t, Equipment: CE marking, safety light barrier, For Sale: Bystronic Xact 100 CNC Press Brake (3.1m x 100T) Available immediately: A exceptionally clean, well-maintained Bystronic Xact 100 CNC Press Brake (2012 Model). This free-standing, down-stroking machine offers precision 4-axis bending with automated crowning, making it an excellent addition to any precision fabrication facility. Detailed technical specifications and machine configurations can be verified through the Bystronic Official Group Website. Machine Overview & Configuration Control system: Equipped with a Cybelec DNC 880S Control unit. Axis configuration: 4-Axis control plus crowning (Y1, Y2, X, R + Manual Z). Safety systems: Integrated Fiessler Laser Guards for optimal operator protection. Guarding package: Features full rear sliding screen guards and side guards. Ndodpfx Akszta A Aoqoc Wandering foot pedal/pedestal controls. Technical Specifications Parameter Measurement Bending Capacity1000 kN (100 Tonne) Working Length3100 mm Distance Between Frames2550 mm Throat Depth400 mm Maximum Stroke200 mm Rapid Approach Speed100 mm/s Working Speed1 – 10 mm/s Return Speed95 mm/s Overall Weight9000 kg Machine Identity Manufacturer: Bystronic Model: Xact 100Year of Manufacture: 2012 (Model Year 2012)

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Pressing force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS control system with back gauge Own weight 8800 kg without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are likely lost. Weight 7300 kg (on the nameplate) Weight 8800 kg (weighed on the crane) in good condition Nodpfx Aez A Ia Sjkqjdc

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, stroke length: 365 mm, pressing force: 250 t, table length: 4,100 mm, Equipment: CE marking, safety light barrier, 1 used Edwards Pearson PR 250 Ton x 4 Metre (often listed as the 250/4100 model) is a heavy-duty, multi-axis CNC hydraulic press brake for sale - highly regarded in the metal fabrication industry for its robust build and longevity. Below is an overview of the technical specifications, variants, and common configurations for this machine based on historical industrial data and machinery listings: ⚙️ Core Technical Specifications • Bending Capacity: 250 Tonnes (Metric) • Max. Bend Length: 4100 mm (4.1 Metres) Year 2002 • Foundation: Free-standing design 🛠️ Common Variants & CNC Controls Configured as a 6 axis machine featuring a 4 axis back gauge (X, R, Z1, Z2,) paired with a Cybelec DNC 1200 control unit. • Features hydraulic crowning system to keep bends precise across the full 4-metre span. Nedpfxez Iqmro Akqedc

Condition: ready for operation (used), Year of construction: 2004, controller manufacturer: OKUMA, controller model: OSP-E100M, spindle speed (max.): 20,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 40, number of axes: 4, This 4-axis Okuma SPACE CENTER MA-500HA was manufactured in 2004. It features a spindle speed of 20,000 rpm and a tool magazine capacity of 40 tools, ensuring efficient machining operations. The machine is equipped with a BLUM laser tool measuring system and includes two-sided fixture blocks for versatility. If you are looking to get high-quality machining capabilities, consider the Okuma SPACE CENTER MA-500HA horizontal machining centre we have for sale. Contact us for further details. • Spindle: HSK-A63 taper; 30 / 22 kW (10 min / continuous) • Tool measurement: BLUM laser tool measuring system • Coolant system: Coolant gun with additional pump Ndjdpfxsz S Eq Uo Akqjc • CNC options: DNC-DT500 (500 MB), Super NURBS Type-A • Electrical supply: 400 V ±10 %, 3-phase, 50 Hz • Rated capacity: 57 kVA • Full load current: 82.3 A • Largest motor rating: 141 / 110 A • Interrupting capacity: 18 kA • Marking: CE; Made in Japan • Documentation: Original sales invoice (2004) available • Working hours: Unknown (machine is no longer connected, dismantled and moved to storage) Additional equipment • Fixtures: Two-sided fixture block (500 x 200 x 850 mm); additional two-sided T-slot block (W615-1307-00)

Condition: used, functionality: fully functional, Year of construction: 2002, stroke length: 200 mm, throat depth: 380 mm, table height: 1,000 mm, overall weight: 7,600 kg, total length: 3,300 mm, total width: 1,850 mm, total height: 2,550 mm, pressing force: 100 t, clearance between the columns: 2,650 mm, distance table to ram: 335 mm, table length: 3,100 mm, table width: 100 mm, Equipment: CE marking, documentation/manual, This BEYELER PR 3 press brake represents a reliable solution for sheet metal bending operations. Equipped with a CYBELEC DNC 1200E CNC control system, it has a bending force of 100 tons, a useful length of 3,100 mm, and 3-axis control (X - Y1 - Y2). The machine is complete with DSP Laser safety light barriers and is supplied with a set of tools. Key features: * Year of manufacture: 2002 * CNC: CYBELEC DNC 1200E * Working force: 1000 kN (100 tons) * Bending length: 3100 mm * 3-axis control (X - Y1 - Y2) * Maximum stroke: 200 mm * Distance between uprights: 2650 mm * DSP Laser safety light barriers Equipment: Ndedpozrtt Eofx Akqjc - Machine complete with 1 set of tools - Operating manual - CNC manual - Electrical diagrams - DSP Laser light barrier manual - CE declarations of conformity Otto Machine For over 30 years, Otto Machine has been selecting and marketing used machine tools in Italy and abroad. The machines can be viewed at our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all information about the machine. It is possible to arrange a visit to our showroom or a video call to view it remotely.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, DURMA E30120 CNC DOWNSTROKING PRESSBRAKE. 3 METRES 120 TONNES CYBELEC DNC 60 CONTROL SAFETY GUARDS Ndsdpfx Aksz Hfhujqoc

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Pr4 100/3100 Make: Edwards Pearson Model: PR4 100/3100 Njdpfx Ajw Aw Svekqsdc MULTI- AXIS Year / new: 1996 Total axis: 6 – 4axis back gauge X R Z1 Z2 Capacity / bed size / tonnage: 3metre x 3100mm x 100ton Cnc control: Cybelec DNC 80 Cnc control Max closing speed 200mm Can be viewed under power

Condition: used, Year of construction: 2017, controller model: NEXUS, _____ Description: Year of manuf. : 2017 Material thickness : 14 mm Technical data Working length:3,100 mm Bending capacity / Folding capacity:14 / 12 mm Upper roll diameter:290 mm Lower roll diameter:270 mm Side roll diameter:210 mm Main motor power:7.5 kW Machine length:4,475 mm Machine width:1,460 mm Machine height:1,520 mm Machine weight:8,000 kg Ndjdpezuikxofx Akqec Control system:NEXUS TouchScreen DNC equipment :- NEXUS DNC control system with touchscreen interface :Programming and operation options: :1. Manual mode – all movements controlled via joystick :2. Teach-in mode – saving of positions :3. Input of values for the rollers via the screen :Storage capacity for 300 programmes : :- Rollers made from C45 alloy steel, induction-hardened :to 50–55 HRC : :- Conical bending unit with both :side rollers set at an angle, lower roller set at an angle and :bearing with hardened guide roller : :- Calibration unit for re-rounding :welded tubes : :- Brake for the upper roller for greater precision when :positioning the material.

Condition: good (used), pressing force: 200 t, ram plate length: 3,100 mm, HAMMERLE 200-ton 3m CNC Press Brake Press Brake, Edge Bending Machine Brand: HAMMERLE Pressing force: 200 tons Bending length: 3100 mm CNC control: CYBELEC DNC 90 Control axes: Y1, Y2, X, R, Z1, Z2, V, which means: Y1, Y2: left and right frame X: back gauge, front/rear R: upper/lower back gauge Z1, Z2: left/right finger V: table compensation Pneumatic supports for sheet metal to the back gauge Ndsdpjz Iuaijfx Akqsc Numerical and graphical 2D element drawing 1 set of tools included with the machine, plus all items visible in the photo in the toolbox Machine documentation: diagrams and operating instructions

Condition: used, Year of construction: 2005, pressure 300 t Ndedpfx Akoz Icy Doqsc chamfer lenght 4550 mm distance between columns 4050 mm control CYBELEC DNC 1200 PS total power requirement 33 kW weight of the machine ca. 25.500 kg

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 70,000 W, spindle speed (max.): 14,000 rpm, travel distance X-axis: 450 mm, overall weight: 32,000 kg, controller manufacturer: SIEMENS, controller model: 840D solution line, number of axes: 5, This 5-axis Weingartner Pick Up 400 machining center for screw manufacturing was manufactured in 2023. It features a maximum workpiece length of 4,000 mm and a maximum workpiece diameter for milling of 180 mm. The machine is equipped with a Siemens 840D control system and offers advanced simultaneous machining capabilities. If you are looking to get high-quality screw manufacturing capabilities, consider the Weingartner Pick Up 400 machine we have for sale. Contact us for further details. • Control: Siemens 840D solution line (NCU 720.3), OP19 touchscreen + Siemens TP700 touch panel • Simultaneous machining: 5-axis; B‑axis turning • Workpiece capacity: max length between centers 4,000 mm; max diameter for milling 180 mm; chuck size Ø260 mm • Power supply: 3 × 400 V / 50 Hz; main fuse approx. 200 AAxes • X: travel 450 mm; rapid 20 m/min • Y: travel −80 / +150 mm; rapid 20 m/min • Z: rapid 25 m/min • B: swivel range ±45°; max swivel speed 90°/s; clamping torque 5,000 Nm • C: max speed 50 rpm; max torque 1,740 Nm (cont.) / 2,580 Nm (40% duty) • W (tailstock slide): rapid 15 m/min • VZ1 / VZ2 (steady rest slides): rapid 15 m/minTurning / Milling Unit • Unit: UFE-400; tool spindle: MDFK • Power: 45 kW (continuous) / 70 kW (40% duty) • Max spindle speed: 14,000 rpm; nominal speed: 1,560 rpm • Torque: 275 Nm (continuous) / 430 Nm (40% duty) • Tool interface: HSK 100‑T (compatible HSK 100‑A / HSK 100‑T); additional interface: Capto C8 • Internal coolant: 80 bar; 20 l/minTailstock Ndsdsz D Efhspfx Akqjc • Hydraulically operated quill; diameter 190 mm; stroke 200 mm; Morse taper MK6Machine equipment / configuration • Front and rear self-centering steady rests; independently CNC-positionable • 2 prismatic steadies for screw milling • Steady jaw ranges: 15–30 / 30–65 / 65–140 / 140–200 mm • Hydraulic SMW KNCS‑N 260 power chuck with quick jaw change • Central lubrication system • Fully enclosed machine housing with driven safety doors; Visiport inspection windows • Hydraulic and pneumatic systems • Coolant and oil mist extraction preparation • Electronic hand control for B/C/X/Y/Z axesSoftware / control functions • Siemens Safety Integrated; Profibus / Profinet; OPC UA interface • 5‑axis simultaneous machining; B‑axis turning; TRANSMIT / TRACYL • Temperature compensation X/Y • DNC remote diagnostics; WMDS Diagnostic System; Telediagnosis capability • weinCAD EXTRUDER DESIGNER; WeinEXT – Praxis Additional equipment • Hinge-belt chip conveyor • Coolant filtration system KF 200: 1,400 l tank; 40 µm filtration; high‑pressure pump 80 bar / 46 l/min; low‑pressure pump 13 bar / 160 l/min; automatic oil skimmer • Oil mist extraction unit: airflow approx. 4,000 m³/h • Operating platform with stairs and railing

Condition: excellent (used), Year of construction: 2002, Technical specifications: Travel ranges (X/Y/Z): 450 / 350 / 350 mm The head has a C-axis Rotation is possible during the eroding process CNC control: MAKINO MGF2 Tool changer Dimensions (length x width x height): approx. 2000 x 1950 x 2550 mm Machine weight: approx. 1.5 tons Condition: Ndjdpfjzmabxox Akqec very good condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 31,900 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OKUMA, controller model: OSP-200M, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis Okuma MA-600HB was manufactured in 2006. It features a maximum spindle speed of 12,000 RPM and a BT50 tool holder. The machine is equipped with a coolant system in the spindle at 30 bar and includes a Renishaw MP10 for tool measurement. If you are looking to get high-quality machining capabilities, consider the Okuma MA-600HB horizontal machining centre we have for sale. Contact us for further details. Ndjdpfx Akezx D Dzsqsc • Coolant through spindle: 30 bar • Tool breakage detection • MOP-Tool • DNC-DT Additional equipment • NC table 0,001 (NC rotary/indexing table) • Renishaw MP10 probe • Mayfran MT10 (chip conveyor/coolant handling) Technical Specification Taper Size BT 50

Condition: used, Year of construction: 1996, swing diameter 530 mm turning diameter 150 mm spindle passage 65 mm control SIEMENS 840 C travel x1 175 mm travel y1 +/- 70 mm travel z1 433 mm travel x2 175 mm travel y2 +/- 70 mm Ndedpovh Nbnsfx Akqsc travel z2 433 mm spindle turning speed range 38 - 4000 U/min C-axis 2 x tool turret 2 x 12 Pos. number of driven tool stations 2 x 12 tool shaft (cylinder shaft DIN 69880) VDI 30 total power requirement 33 kW dimensions of machine L x W x H 3,95 x 2,49 x 2,6 m Accessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,000 h, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 1,600 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 38,000 W, number of slots in tool magazine: 46, tool weight: 8,000 g, number of axes: 5, This 5-axis MIKRON HPM 1350 U was manufactured in 2019. It features an impressive X-axis travel of 1350 mm, Y-axis travel of 1150 mm, and Z-axis travel of 895 mm. The machine includes a robust rotary table with a diameter of 1100 mm and a maximum table load of 1600 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON HPM 1350 U universal machining centre we have for sale. Contact us for further details. Ndjdpjz R A Tdjfx Akqsc - Control Unit: Heidenhain iTNC 530 HSCI FS (MC 6541 with HDR and Core i7-3 1.7 GHz dual-core processor, 15.1" color TFT)- X-Axis Travel: 1350 mm- Y-Axis Travel: 1150 mm- Z-Axis Travel (Horizontal Spindle): 895 mm- Z-Axis Travel (Vertical Spindle): 700 mm- Motorspindle Overhang to Z-Axis: 700 mm- Swivel Axis A Range: +16° to -120° (136° total range)- Rotary Axis C Range: n x 360°- Simultaneous Axes: 5 / 5 simultaneous- Rotary Table Diameter: Ø 1100 mm (flattened on 2 sides to 1000 mm)- Table Centering: Ø 50 H6- T-Slots: 9 slots, 100 mm distance, 18 H12 width- Max. Table Load (Centered): 1600 kg- Table Clamping Moment: 8000 Nm- Table Drive Torque (100% ED / Max): 1130 Nm / 2300 Nm- Max. Table Speed: 40 rpm- Rapid Feed / Feed Rate (X, Y): 15 / 32 m/min- Rapid Feed / Feed Rate (Z): 15 / 32 m/min- Swivel Rate Feed / Rapid (A-Axis): 11 / 20 rpm (4000 / 7200 °/min)- Max. Feed Force: 10 kN- Acceleration: 4 m/s²- Spindle Speed: 0 - 15,000 rpm- Spindle Taper: HSK-A63 (DIN 69893-1)- Spindle Power (S6 40% ED): 38 kW- Spindle Torque (S6 40% ED): 193 Nm- Tool Magazine Capacity: 46 positions (HSK-A63)- Max. Tool Diameter: 80 mm (fully loaded) / 130 mm (partially loaded)- Max. Tool Length: 300 mm- Max. Tool Weight: 8 kg- Max. Magazine Load: 200 kg- Chip-to-Chip Time: approx. 11 s- Coolant & Chip Management: Chip conveyor with Internal Coolant Supply (IKZ 18-80 bar, frequency-regulated), 30 µm band filter unit, hand wash station- External Coolant Supply: 7 bar, 28 l/min- Air Blast Through Spindle: Yes (up to 10 bar)- Measuring & Calibration Systems: Renishaw OMP60 HSK-A63 3D Infrared Touch Probe, Renishaw NC4 2-piece Laser Tool Measuring System, KinematicsOpt- Smart Machine Features: APS (Advanced Process System), ITC (Intelligent Thermal Control), DNC Remote Network Access, rConnect Live Remote Assistance- Operating Hours:* Control On (Steuerung ein): 46,889 h 58 min 07 s* Machine On (Maschine ein): 42,786 h 48 min 49 s* Program Run (Programmlauf): 9,929 h 46 min 01 s* Drives On (Antriebe Ein): 34,546 h 44 min 31 s* Spindle On (Spindel Ein): 5,660 h 25 min 27 s- Maintenance / Repairs Log Highlights:* Spindle replaced on 10.11.2021 (GF Spindle f. 2/782) with new assembly on 29.11.2021* Hard drive replaced on 23.12.2022* Drive unit replaced on 24.05.2023* Rotary feedthrough (Drehdurchführung) replaced on 07.09.2023* A-axis aligned and spindle adjusted on 21.02.2026- Operating Voltage: 3x 400 V (+6%/-10%), 50 Hz- Connected Load: 67 kVA / 61 kW (with IKZ)- Fusing: 125 A- Compressed Air Supply: 6 + 0.5 bar, approx. 300 l/min Technical Specification Taper Size HSK 63

Condition: good (used), Year of construction: 2012, Used press brake from Knuth Capacity: 4100 x 250 tons Cybelec DNC 880S CNC control Ndsdpozz Rz Sjfx Akqsc Y1, Y2, X and R axis CNC Hydraulic crowning Amada / Euro top clamp 1 set of complete tooling