Used Surface Equipment for sale (45,821)

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized Dcjdpfxexqzmke Acpon - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, OKAMOTO ACC-16*24SA1 Precision Surface Grinding Machine Okamoto Precision Surface Grinding Machine ----- Model ACC-16•24SA1 Automatic Wheelhead Approach, Retraction to Start Position, Automatic Dress Cycle with Wheel Wear Compensation, Shift Plunge Cycle--- ----- Grinding Capacity 16”x 24” Standard Accessories • Automatic Overhead Wheel Dresser • Touch Screen Controller with 10” Display With Compensation, including Diamond Tool • Vertical & Crossfeed Pulse Generator • Rapid Wheel head Retraction • Teach-Input Positioning Dedpfx Aozmhknecpscn • Load Meter for Grinding Wheel Motor • 5 HP Wheel Spindle Motor • Shift-Plunge Rough Grinding Cycle • Stainless Steel Wheel Guard • Selectable Rough/Fine Infeed Grinding Method • Leveling Bolts with Plates • Table Park for Safety • Necessary Tools & Tool Box • Stainless Steel Splash Guard • Installation and Training • Instruction Manual

Condition: used, Year of construction: 1961, Technical details: grinding length: 600 mm grinding width: 200 mm workpiece height: 270 mm grinding length: mit Magnet: 500 mm Distance Spindlecenter - clamping surface area, min:: 350 mm grinding spindle speed: 1000...4700 U/min table surface area: 720 x 200 mm table load capacity: 60 kp magnetic plate size: 455 x 180 (Gleichstrom) mm magnetic-table: vertical kippen 90° längs Stück total power requirement: 2,0 (2,7 PS) kW weight of the machine ca.: 1600 + 176 kg Gleichrichter kg Dodou Ngg Uepfx Acpocn dimension machine xH: 1,4 x 1,8 x 1,7 m transport measurements machine: 1,4 x 1,8 x 1,6 m dimensions electric cabinet: L: 850 x B: 450 x H: 1.100 mm dimensions of grinding wheel: Ø 225 x 20 x Bohrung Ø 51 mm mm The magnetic plate (24V) is cooled. Grinding spindle: The grinding wheel infeed is electric, vertical 270mm, infeed z-axis 0,002 mm to unlimited inching infeed 0,001 - 0,010mm Peripheral speed max 35 m/sec. allowed equipped with coolant tank, pump and magnetic separator, as well as grinding wheel - size Ø 152 x 14mm plus various accessories (in the cabinet) like some grinding wheels and balancing flange The machine is pre-equipped for an exhaust system. *

Condition: used, Year of construction: 2016, functionality: fully functional, SUPERFICI painting robot with 2 drying tunels and UV dryer and cooler 1.CATTINAIR - belt converyor (mat. loading/feeding) 2. GIARDINA -sanding machine 3. SUFERFICI - MAGNUM 3.2.2 - painting robot 4. NEW FINISHING - drying tunnel 1 5. NEW FINISHING - drying tunnel 2 6. NEW FINISHING - UV dryer 7. CML Finishing - cooling tunnel 8. CATTINAIR - belt conveyor (unloading) Dodpfxjz Izhye Acpjcn

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: Djdpfjzimbksx Acpecn The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. Dsdpfx Aozut Axecpecn FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Label dispensing module for print integration, print module 4L300 thermal transfer printer, belt conveyor, see photos for details. Dedpezn N Nnsfx Acpocn

Condition: used, Workshop Equipment Set – Mobile Assembly Table & Steel Storage Cabinet Used workshop equipment offered as a set for equipping an assembly, maintenance, or production workspace. The set includes: Large mobile assembly table – 1 pc • Dimensions: 2050 × 2030 × 665 mm • Perforated work surface • Sturdy metal frame with casters • Suitable for assembly work and handling large components • Reference: 48784-131 Steel storage cabinet – 1 pc • Dimensions: 500 × 500 × 1730 mm • Open-front design with two shelves and three storage compartments • Suitable for storing tools, parts, and workshop supplies • Reference: 48457-234/1 Professional work tables with metal frames – 2 pcs Internal code: 48784-234 Large, sturdy work tables with durable metal frames, spacious work surfaces, and lower storage shelves Dimensions: 1500 × 1000 × 950 mm Professional work tables – two sizes Code 48784-227 · 1500 × 1000 × 940 mm Code 48784-227/1 · 1500 × 750 × 900 mm Work tables – three sizes Code 48784-201 · 2000 × 900 × 900 mm - 1 pc Code 48784-201/1 · 1500 × 900 × 900 mm - 2 pcs Code 48784-201/2 · 1500 × 750 × 900 mm - 1 pc Professional work tables – 4 pcs Dimensions: 1500 × 1000 × 950 mm Internal code: 48784-176 A practical combination of a large work surface and organized storage for a single workshop area. Condition: used; please see photographs. Djdpfxoz Hmbce Acpjcn Location: Latvia. Price for the complete set: upon request. Prices exclude VAT. Please contact us for further information or to arrange a viewing.

Condition: good (used), Surface grinding machine Manufacturer: Harig Stock number: 2965-4 Year of manufacture: Machine number: Type: Super 612 Dcjdoz Hzyyepfx Acpon Grinding length: 300 mm Grinding width: 175 mm Table clamping surface: 300 x 150 mm Magnet: 250 x 120 mm Vertical adjustment: 250 mm Table movement, longitudinal: 330 mm, manual Table movement, transverse: 175 mm, manual Spindle speed: 3,600 rpm Grinding wheels: 200 x 20 x 51 mm Connection: kW Accessories/Equipment: Condition: good Weight: t Dimensions: 870 x 900 x 1,900 mm

Condition: good (used), Year of construction: 2014, 2x carton packaging machines, carton erectors, B&E Equipment / I-Pak – used: Price per unit, ex works: only €9,950 (net), with self-dismantling! Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Each unit includes 1x Nordson ProBlue 4 hot melt adhesive applicator with 4-liter hot melt adhesive Weight: approx. 1,500 kg 400V, 8kW, 15A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg Djdpfx Acszbyn Nspjcn A video of the machine is available!

Year of construction: 2023, condition: excellent (used), 2023 Vixen Surface Treatments 2 Stage FL250 Industrial Parts Washer Dcjdezt R E Uopfx Acpon Front Pneumatic Vertical Loading Door Dimension W2,690 x H1,910mm. Voltage 400V. S/No. 3177 (2023). Please note a loading charge of £50 + VAT to be added to buyer's invoice. With Extractor Fan, Pumps, Filtration, Signal Tower, Loading Trolley, Staging & Wash Gun. Overall Dimensions W3,300 x D4,440 x H2,800mm.

Condition: used, - Cooking chamber dimensions: 1200x2000 mm Dcjdewxmn Sepfx Acpsn - Refurbished equipment: The equipment is prepared upon order, collection and return deadlines are agreed at that time (please ask for the price after refurbishment).

Condition: excellent (used), Year of construction: 2007, Stöckel FX 80/50 ST 2 Surface grinding machine Stöckel FX 80/50 with ST 2 control, year of manufacture 2007, in SUPER condition. CE-compliant!! The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Year of manufacture 2007 Technical data Clamping area (L x W in mm) 900 x 500 Grindable area (L x W in mm) 800 x 500 Magnetic chuck size max. mm 800 x 500 Grinding wheel dimensions max. mm Dsdpoz Ipk Aofx Acpscn 300 x 25 x 51 Distance table/spindle center mm Max. 400 Table longitudinal feed, oscillating m/min 1 – 20 Creep feed mm/min 0 – 500 Grinding spindle drive, speed rpm 1900 Power kW 7.5 Machine weight approx.: 4.0 t Accessories and equipment: About the machine: Offered is a surface grinding machine Stöckel FX 80/50 with ST 2 control. This universal surface grinding machine is in very good original condition. It comes from a company where it was only used for training purposes. It features a very easy-to-use control system. A grinding travel of 800 mm in the longitudinal axis and a transverse travel of 500 mm make it suitable for toolmaking, fixture construction, and small-series production. The extensive standard equipment and the easy handling of the machine characterize this series. The stable design of the spindle head and the guide principle with double V-guides in the longitudinal and transverse axes guarantee lasting precision. The intuitive operation of the controls simplifies operation and significantly increases productivity. The guides are regularly lubricated by the central lubrication system. The Stöckel has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Stöckel on-site under power. You can find more surface grinding machines from well-known manufacturers on our website.

Condition: used, Year of construction: 2018, REF: MM6441 Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Chinese) 5000L stainless-steel tank with agitator. Manufacturer - Wenzhou Jiangbo Dairy Equipment Factory Co., Ltd. Model - DCG. Dcedpfx Acjza T Slspon Date of manufacture - 2018. Speed - 36 r/min. Electrical requirements – 415 V / 50 hz / 3 phase.

Condition: good (used), Year of construction: 2014, Cardboard packaging machine, carton erector, B&E Equipment / I-Pak – used: Price ex works: only €9,950 (net), if disassembled by the buyer! Manufacturer: B&E Equipment / I-Pak Type: BA20-2 Year of manufacture: 2014 Serial number: 14/0559 Each unit comes with 1x Nordson ProBlue 4 hot melt adhesive applicator and 4 liters of hot melt adhesive. Weight: approx. 1,250 kg Djdpfszbynpox Acpocn 400V, 7kW, 16A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: used, Year of construction: 1981, functionality: fully functional, Surface Grinding Machine JONES & SHIPMAN 540 L Travel X: 406 mm Travel Y: 470 mm Travel Z: 168 mm Year of construction: 1981 Magnetic chuck dimensions: Length 355 mm x Width 150 mm Grinding wheel diameter: Ø 180 mm Spindle motor: 2 speeds motor Motorised raising/lowering Equipped with: Lubricant tank Voltage: 220 V Tri Djdpfx Ajz H Rzmecpecn Dimensions (L x W x H): 1300 x 1300 x 1900 mm Total width with lubricant tank: 2000 mm Weight: approx 1,2 T

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request Dcjdpfx Ajyalqyjcpsn If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), 1 x Mono doughnut fryer. model FG059-B02 Dcjdpfx Acjy S Td Hjpen

Condition: used, Year of construction: 2005, grinding length 5200 mm grinding width 1000 mm workpiece height 320 mm Control Siemens 840D Passage width 1300 mm grinding height 320 mm grinding motor 306 kW grinding motor turning speeds up to 320 U/min grinding motor feed, infinitely variable 0,5-35 m/min grinding motor adjustment in steps 0,002-1 mm grinding motor adjustment, continuously stepless bis/upto 5 mm/min dimensions of the machine ca. 11,21 x 3,2 x 3,85 m CNC production surface grinding machine with segment head Equipment / Accessories: - with segment head, diameter 1400 mm segment head dimensions: 120/106 x 41 x 250 mm number of segments: 1 set = 26 pieces - with electro-magnetic table 5200 x 1300 mm - Marposs measuring control travel (Z1 axis), vertical: 420 mm - coolant flow rate 2000 l/min Dcodjz Alafjpfx Acpon lifting station 2x pump for 1000 l/min

Condition: used, functionality: fully functional, Manual Surface Grinding Machine MONOPRECIS type 1 Travel X: 350 mm Travel Y: 160 mm Travel Z: 220 mm Magnetic chuck dimensions: Length 255 mm x Width 130 mm Grinding wheel dimensions: Max Ø 140 mm Manual movement on X - Y - Z Electrical cabinet redone in 2017 Equipped with1 vacuum system Voltage: 220 V Tri Vaccum system dimensions: L 500 x W 500 x H 800 mm Width: 1200 mm Dodpfx Acjz Hyz Aepscn Depth: 1000 mm Height: 1600 mm Weight: approx 500 KG

Condition: used, functionality: fully functional, Manual Surface Grinding Machine MONOPRECIS type 1D Travel X: 350 mm Travel Y: 200 mm Travel Z: 220 mm Magnetic chuck dimensions: Length 255 mm x Width 130 mm Grinding wheel dimensions: Max Ø 140 mm Manual movement on X - Y - Z Electrical cabinet redone in 2017 Equipped with1 vacuum system Voltage: 220 V Tri Vaccum system dimensions: L 500 x W 500 x H 800 mm Width: 1300 mm Depth: 1200 mm Dcsdpjz Hy Upofx Acpjn Height: 1600 mm Weight: approx 500 KG

Condition: ready for operation (used), Year of construction: 2024, Lease Return Mahr MarSurf XP 20 Professional CNC surface and contour measuring station – manufactured in 2024 Technical Data Manufacturer: Mahr Model: MarSurf XP 20 Professional – Series 1000 Year of Manufacture: 2024 Condition: Used Equipment MarSurf XP 20 Professional with LD control MarWin Professional Contour & Roughness Plus CNC-Plus Software QS-STAT Plus (Q-DAS interface) Industrial PC (Dell) with Windows 10 IoT Enterprise Feed unit MarSurf LD 130 Feed length: 130 mm Standard measuring stroke Z: 13 mm Probe arm changer for up to 10 probe arms 4-axis CNC workpiece positioning system Swivel axis ±135° Rotary axis ±170° Linear axis X: 400 mm Linear axis Y: 400 mm Positioning accuracy: approx. ±250 µm (X/Y/Z) Hard stone measuring plate with mechanical-pneumatic vibration isolation CNC measuring column 17" touchscreen Control cabinet Soundproofed protective enclosure Machine dimensions Enclosure (W × D × H): 1450 × 1300 × 2270 mm Dedjzqzn Ujpfx Acpjcn Accessories Adapter plate X/Y/Z offset Manual chuck DM28 Signal tower Probe arm set Additional probe arm 32 GB RAM Complete technical documentation (digital and in paper form) Description For sale is a high-quality CNC surface and contour measuring station from Mahr. The system is suitable for highly precise measuring tasks in industrial quality control and features extensive equipment with professional measuring and evaluation software as well as an automatic 4-axis positioning system. The system was delivered in 2024 and is in used condition. Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No liability is assumed for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, Available from stock Max. Grinding width: 225 mm (incl. wheel) Max. Grinding length: 450 mm Max. Distance table to spindle center: 450 mm Max. Longitudinal movement of the table (hydr.): 500 mm Max. Max. longitudinal movement of the table (man.): 530 mm Automatic vertical infeed: 0.002 - 0.004 mm Automatic transversal infeed: 0.4 - 6 mm Max. Clamping surface of the table: 450 x 200 mm Max. Clamping surface of magnetic clamping plate: 450 x 200 mm Grinding wheel D x B x d: 203 x 12.7 x 31.75 mm Rapid traverse: 330 mm/min Grinding spindle speed: 2850 rpm grinding spindle drive: 1.5 kW hydraulic motor: 0.75 kW weight: 1300 kg dimensions W x D x H: 2100 x 1650 x 1900 mm Balancing mandrel Manual extractor with diamond Automatic vertical feed Electro-magnetic clamping plate Control panel on swivel arm Grinding wheel spindle on 4 high precision angular contact ball bearings Hardened guideways in all 3 axes with needle bearings Grinding wheel Grinding wheel flange Grinding wheel balancing scale Coolant system with aut. paper filter and magnetic separator Djdpjirwnvefx Acpocn Operating instructions in ENGLISH Machine and equipment according to CE regulations

Condition: good (used), Year of construction: 2010, lifting height: 2,200 mm, fuel type: electric, Weights Empty weight: 360 kg Functional Lifting capacity: 227 kg Working height: 440 cm Dimensions of cargo space: 120 x 76 x 170 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: Custom Equipment Model: P830CE Year of build: 2010 Condition: Used Data: Max. working height: 4,40 m Platform height: 2,40 m Platform dimensions LxW: 1,20 x 0,72 m Max. basket load: 227 kg Dedpfx Acjzx Dhaepecn Area of use: For indoor use only and must only be placed on a solid, level surface. Transport dimensions LxWxH: 1,20 x 0,76 x 1,70 m Drive type: Battery Empty weight: 360 kg Special features: Aerial work platform without a drive, manual brakes on the rear swivel wheels. White tires, attachment points for safety harnesses (PPE) available.

Condition: good (used), Year of construction: 2001, operating hours: 742,180 h, functionality: fully functional, machine/vehicle number: 20010602671/bj.2001/1902, total length: 2,000 mm, total height: 1,800 mm, total width: 1,800 mm, type of input current: AC, product height (min.): 10 mm, product length (min.): 100 mm, product width (min.): 50 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 16 A, overall weight: 800 kg, film width: 650 mm, input frequency: 50 Hz, nominal power (apparent): 6 kVA, table width: 40 mm, energy consumption: 6 kWh, transport length: 2,400 mm, air demand: 2.5 m³/h, Equipment: CE marking, BVM Brunner Compacta 5015 Serva + Heating tunnel and Conveyor belt in very good condition, available for sale. The machine has been well maintained and carefully operated throughout its service life. It has only been used for a few hours per day on average, resulting in limited operating time and a well-preserved overall condition. Dcedpfx Acjz Hmmfopsn The BVM Brunner Compacta 5015 Serva is in very good working condition and is ready for continued professional production. The machine has been regularly maintained and operated with care. Machine highlights: Manufacturer: BVM Brunner Model: Compacta 5015 Serva Very good overall condition Well maintained Only used a few hours per day on average Carefully operated Ready for continued production Inspection possible by appointment This is an attractive opportunity to acquire a well-maintained BVM Brunner Compacta 5015 Serva with limited daily use and in very good working condition. Further technical specifications, photographs and additional information are available upon request.