Used Bas 315 4 Wn 55 for sale (63,566)

Condition: excellent (used), Year of construction: 1987, Elektra Beckum used wood band saw BAS 315/5 WN55 Fjdpsvkyd Sefx Ab Nogh Year of manufacture: 1987 Serial No.: 2106584 Saw blade length: 2240mm Voltage: 230 volts Cutting depth: 170mm Parallel stop Base frame Location: from stock 54634 Bitburg - immediately available -

Condition: excellent (used), For sale: SEW-EURODRIVE MOVIDRIVE® inverter with MDX60A0550-503-4-00 power module. This is a 55 kW frequency inverter designed to power three-phase 3×380–500 V motors. The parameters correspond to the MOVIDRIVE B series. Technical specifications Fgjdpfx Ajzphcpsb Noh Control unit Manufacturer: SEW-EURODRIVE Model: MDX61B0550-503-4-00 Controller type: MDX61B-00/0T P/N: 08279691 Control unit P/N: 08249571 S/N: 0159828 SO#: 01.1569277601.0001.08 Protection class: IP00 Country of manufacturer: Germany (Made in Germany) Power module Model: MDX60A0550-503-4-00 Sach. Nr.: 8226636 Nr.: 0588043 Input parameters Power supply: 3 × 380–500 V AC ±10% Frequency: 50–60 Hz ±5% Input current: 94.5 A (400 V) Operating temperature: 0–40°C Protection class: IP10 Output parameters Voltage: 3 × 0–500 V Frequency: 0–180 Hz Output current: 105 A (400 V) Apparent power: 73.5 kVA Recommended motor power: 55 kW Additional information Repairs performed at SEW EURODRIVE Werk Wien Repair No.: 14584 Repair performed: Week 24 of 2012 Final inspection: Week 24 of 2012 Condition Device has been tested and is fully functional. Good visual condition, with normal signs of use. All connections and terminals are complete and consistent with the photos. The set for sale is exactly the one shown in the photos.

Condition: used, Year of construction: 2023, functionality: fully functional, ERSA VERSAFLOW 4/55 2Mdolue S021B-23A0548D, used, 2023, price: €190,000 (conveyor not included) Fgsdpfx Ajx Tgvlob Njh Specifications available on request.

Condition: good (used), Year of construction: 1973, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, Hydraulic 4-column press, manufacturer FIBRO, year of manufacture 1973, pressing force 315 t. Dimensions approx. 3.0 m × 1.6 m × 4.5 m. Table size: 2.5 m × 1.5 m. Fjdox Nhakepfx Ab Nogh Separate hydraulic unit and control panel. Maximum working area 883 mm (ram fully retracted). Powered, can be inspected on site. All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, planing width: 500 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,700 rpm, total length of planing tables: 800 mm, total width: 920 mm, total height: 1,140 mm, overall weight: 450 kg, VEBA S500 PLANER | 500 MM | 4 KNIVES | 4.3 kW | 2009 | ITALY | Professional VEBA S500 planer/thicknesser from the renowned Italian company VEBA Meccanica S.r.l. This machine is designed for the precise planing of wooden components to a specific thickness. Its robust, compact design and 4-knife cutterblock make it ideal for use in both carpentry workshops and for the production of solid wood components. Made in Italy, this machine is used and ready for operation. KEY FEATURES: Fgodsz A A Iwspfx Ab Njh - Renowned Italian brand VEBA - Model S500 - Planing width of 500 mm - 4-knife cutterblock - Traditional knives - Robust construction - 2 feed speeds - Material height range up to approx. 240 mm - Maximum planing depth of 8 mm - Table height adjustment - 2 rollers in the table to facilitate material feed - Machine equipped with CE marking - Year of manufacture 2009 TECHNICAL DATA: - Planing width: 500 mm - Work table dimensions: approx. 500 × 800 mm - Material height range: approx. 4–240 mm - Maximum planing depth: 8 mm - Planing cutterblock: Ø 110 mm - Number of knives: 4 pcs - Type of knives: traditional - Cutterblock rotational speed: approx. 4700 rpm - Feed speed: 6.5 / 13 m/min - Table rollers: 2 pcs - Height adjustment: electric and mechanical MOTOR / POWER SUPPLY: Motor power: 4.3 kW Voltage: 400 V Power supply: 3 phases DIMENSIONS AND WEIGHT: Machine dimensions: approx. 1000 × 920 × 1140 mm Weight: 450 kg – according to the nameplate We invite you to test the machine on-site. Financing options available through leasing or installment plans. WE ORGANIZE TRANSPORT.

Condition: used, Year of construction: 2025, Used Machine Year of manufacture: 2025 Condition: like new, delivered in December 2025 Features and Technical Specifications: - Solid worktable made of heavily ribbed gray cast iron for maximum stability and durability - Sturdy base frame made of welded steel—guarantees high torsional rigidity and vibration-free operation - Precision format sliding carriage made of anodized aluminum—smoothly guided by a high-quality ball-contact system - Carbide guideways—for lasting precision and minimal maintenance Fjdpfxjzk N Txo Ab Negh - Swiveling cast iron saw unit with dual segment guide - Exact zero-point swivel for maximum cutting accuracy - Solid rip fence with round bar guide - Equipped with a sliding eccentric clamping device - Integrated miter cutting device on the sliding carriage—for fast and precise miter cuts - Scoring unit with belt drive - Format sliding table length: 2600 mm - Trimming length: 2600 mm - Format sliding table width: 360 mm - Table length: 940 mm - Table width: 560 mm - Cutting width with rip fence: 900 mm - Max. crosscut width to the left of the saw blade: 3200 mm - Saw blade tilt: 90–46° - Max. cutting height at 90°: 100 mm - Max. cutting height at 45°: 71 mm - Saw blade diameter: 315 mm - Speed: 4,000 rpm - Scoring blade diameter: 120 mm - Scoring blade speed: 9,000 rpm - Motor: 6 kW Weight: approx. 560 kg

Year of construction: 2004, condition: excellent (used), functionality: fully functional, SICA SOCKETING MACHINE BA.2F.1T. 63-315 Application: KG-U PVC pipes, Pipe lengths: 0.5m, 1m, 2m, 5m, 6m Year of manufacture: 2004 Fedpfx Absxiy Nue Nsgh 1 socket per cycle Socket tool: 160x4.6 The socketing machine is in very good condition, still in operation, and will be removed from production in 3-4 months.

Condition: good (used), Year of construction: 2004, operating hours: 76,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 70 mm, displacement volume: 1,047 cm³, plate length: 1,200 mm, plate height: 1,270 mm, total length: 9,830 mm, total width: 2,330 mm, total height: 2,480 mm, overall weight: 23,090 kg, KRAUSS MAFFEI KM 420-1900/55 CZ Multinject Stock No.: 503534 Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 55 CZ Control System: MC 4 Year of Manufacture: 2004 Operating Hours: 76,000 h Technical Data – Clamping Unit Clamping Force: 4200 kN Tie Bar Spacing h x v: 800 x 800 mm Platen Size h x v: 1270 x 1200 mm Minimum Mold Height: 380 mm Maximum Mold Height: 1400 mm Opening Stroke: 1020 mm Ejector Stroke: 250 mm Ejector Force: 95 kN Centering of Moving Platen D: 200 mm Centering of Fixed Platen D: 200 mm Tool Weight: 6700 kg Technical Data – Injection Unit Screw Diameter: 70 mm Injection Volume: 1047 ccm Injection Pressure: 1778 bar Screw Length: 20 l/d Screw Speed: 527 rpm Plasticizing Rate: 95 g/s PS Free Injection Rate: 953 g/s PS Number of Heating Zones: 6 Dimensions & Weight Machine Dimensions L x W x H: 9.83 m x 2.33 m x 2.48 m Total Weight: 23090 kg Equipment Screen Text in German Hydraulic Core Pull 6x Machine without Handling System Machine without Material Hopper Leveling Elements Tool Heating 16x Two-Component Injection Molding Machine Fedpfx Ajz Dgc Ieb Njgh

Condition: new, Year of construction: 2024, Quantity: 3 units – price per unit Year of manufacture: 2024 Reach: 3143 mm Fgsdpfsz A U T Sex Ab Noh Load capacity: 315 kg Axes: 4 Weight: 1330 kg

Year of construction: 1996, condition: ready for operation (used), Various CNC and conventionally controlled milling machines, make Fritz Heckert, are available. 1) Fritz Heckert FU 315/E, weight: approx. 4000kg. 2) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 3) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 4) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 5) Fritz Heckert FU 315/E, weight: approx. 3200kg. 6) Fritz Heckert FW 400/E, weight: approx. 3700kg. 7) Fritz Heckert FU 315, weight: approx. 3100kg. An on-site inspection is possible. Fgedpfxsyyy Nrs Ab Neh

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Manufacturer: WEILEDER Model: WTK -40/55 PT Category: Packaging machine Year of manufacture: 2018 Location: Ex site Fsdpjyatgcefx Ab Negh Availability: Short-term Operational condition: Dismantled/in storage Technical Data Passage width: 400 mm Passage height: 200 mm Workpiece length max.: 550 mm Film width max.: 600 mm Number of rollers bottom: 1 Total units: 1 Longitudinal units: 1 Magazine slots: 1 Packaging stations: 1 Conveyor technology: Stepless feed Shrink film: Longitudinal film station Discharge: Automatic version Mobile device closure Sealing units Conformity marking: CE marking Total connected load: 9 kW Space requirement length: 2.57 m Space requirement width: 0.87 m Space requirement height: 1.6 m

Condition: used, functionality: unexamined, nominal power (apparent): 210 kVA, For more precise data, see the nameplate Fedpfx Aexn S Exob Nsgh

Condition: used, A Linck chipper canter line for continuous chipping, turning, profiling and sawing of round timber as well as for the production of main products and side boards is offered. 1) LINCK V30 chipper canter, feed speed: 50m/min/70m/min, drive power: 2 × 132kW, min. log diameter: 80mm, max. log diameter: 360mm, cutter heads: 18 chipping knives and 18 finishing knives, max. output: 1000fm/24h, 2) Linck DVN 55 turning device, function: turning and positioning of the preprocessed round timber between the chipper canter stages, 3) Linck V25 chipper canter, max. feed speed: 70m/min, drive power: 2 × 132kW, cutter heads: 18 chipping knives and 18 finishing knives, 4) Linck VPP 34 profiling unit, three-phase motors: 4, power: 32kW/50kW, speed: 1000rpm/1500rpm, feed: 4 geared motors, feed motor power: 1.3kW/2kW, max. feed motor speed: 66rpm, function: profiling of the side boards before the sawing process, 5) Linck VS 66 saw unit, three-phase motors: 4, power: 66kW/motor, speed: 3000rpm, fixed saw spacing: 24mm for 4 side boards. The chipper canter line will be available from January 2027. An on-site inspection is possible. Fgodpfjzvy Eiox Ab Neh

Year of construction: 2001, condition: used, Four CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 3) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 4) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible. Fedpfx Abjzzqc No Njgh

Condition: good (used), overall weight: 300 kg, Hofmann RWNC-300 CNC dividing head / A-axis, including tailstock GHL 4/300 Fgedpfx Absz Iv Eaj Neh For sale is a robust and highly precise CNC dividing head (A-axis) from Hofmann Mess- und Teiltechnik (Werkzeugsysteme Müller GmbH), including a matching tailstock. This system is ideal for expanding milling machines and machining centers for multi-axis machining. Technical data & equipment details: Manufacturer: Hofmann Mess- und Teiltechnik (Werkzeugsysteme Müller GmbH) Type of dividing head: RWNC-300 Factory number dividing head: 11281 (Hofmann ID No.: 1170-0500-241) Weight dividing head: 300 kg Type of tailstock: GHL 4/300 Factory number tailstock: 1109 (Hofmann ID No.: 1270-0400-010) Weight tailstock: 85 kg Equipment: Includes a solid counter support (tailstock) with centering point, as well as the associated connection cables and lines. Matching keys/fastening screws are included. Logistics: No shipping. Collection only (delivery terms: EXW Leipzig).

Condition: used, Year of construction: 2022, We are selling, on behalf of a customer, a used Zaug side snowplow, model SG 50K-440-4-55, manufactured in 2022. Fgjdjzl I E Aepfx Ab Neh Side wing snowplow SG50K440 Suspension elements (cable system), 4 pieces Blade length A: 440 cm Clearing width B at a swing-out angle of 55 degrees: 360 cm Plow height: 106 cm Weight with mounting plate DIN 76060-A: approx. 1150 kg Further details are available upon request from Mr. Walter Christian at the following telephone number: . Email address: christian.. Location: 93095 Hagelstadt

Condition: excellent (used), functionality: fully functional, Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 55 CZ Control system: MC 4 Year of manufacture: 2004 Operating hours: 76,000 h Technical data, clamping unit side Clamping force: 4200 kN Tie bar spacing h x v: 800 x 800 mm Platen size h x v: 1270 x 1200 mm Minimum mold height: 380 mm Maximum mold thickness: 1400 mm Opening stroke: 1020 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Fgsdpfxszypcfj Ab Njh Technical data, injection unit side Screw diameter: 70 mm Injection volume: 1047 ccm Injection pressure: 1778 bar Screw length: 20 l/d Screw speed: 527 rpm Plasticizing rate: 95 g/s PS Free injection rate: 953 g/s PS Number of heating zones: 6 Dimensions & Weight Machine dimensions L x W x H: 9.83m x 2.33m x 2.48m Total weight: 23090 kg Equipment • Screen text in German • Hydraulic core pull, 6x • Machine without handling system • Machine without material hopper • Leveling elements • Tool heating, 16x • Two-component injection molding machine

Condition: used, Year of construction: 2006, machine/vehicle number: OTW, Schmalz vacuum lifter with a load capacity of 125 kg Dimensions: 180x80 cm, suction pads are fully adjustable. These are porous and should be replaced. 4 suction pads, each with a diameter of 140 mm Connection: 400V 16A Fsdpfx Aoy Hf Itsb Nogh Good condition, see pictures Item location: 75053 Gondelsheim Shipment via freight carrier or collection by appointment only

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 1-4 holder Ø 50 mm Fgodpfx Aoiqhhvob Njh -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Condition: used, Year of construction: 1983, Press force: 315 t Stroke: 700 mm Frame width: 1750 mm Shut height (stroke up): 1200 mm Fgjdpfx Aszyn Rnsb Noh Table area: 1600 x 1500 mm Cushion force in table: 125 t Cushion stroke in table: 200 mm Cushion area in table: 1200 x 1500 mm Table height above floor: 750 mm Ram area: 1640 x 1500 mm

Condition: excellent (used), Mitutoyo Frame Micrometer (28662) 103-155 OM-475, measuring range 450 - 475 mm Fgjdpfow Suwgsx Ab Nsh

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor Fgjdpem Nb Riefx Ab Noh >control panel >electric cabinet >capacity through spindle 60 mm >max. piece length 340 mm

Condition: excellent (used), Year of construction: 1997, Battenfeld BA 800/315 CDC Closing 80 tons Fodor Nf R Iopfx Ab Nsgh Year 1997 Scrow 40 mm distance between tie bars 37x42

Year of construction: 1997, condition: refurbished (used), overall weight: 300 kg, total length: 1,270 mm, total width: 550 mm, total height: 570 mm, 4 spiral casing pumps in process design 1 of these completely overhauled, ball bearings of the pump and motor new. Mechanical seal overhauled by a specialist company. All seals new. Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type, drive side: oil Lubricant monitoring: oil level regulator Fgodsiuznuspfx Ab Noh Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Partition wall: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Hardened steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing housing lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction nozzle nominal size: DN 80 Discharge nozzle nominal size: DN 40 Nominal pressure suction side: PN 10 Nominal pressure discharge side: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection type: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and transport - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine technology

Condition: ready for operation (used), Year of construction: 2011, A modified MECO internal keyway slotting machine is available. Keyway width range: 4mm-45mm, max. square keyway diameter: 36mm, max. hexagonal keyway diameter: 36mm. The machine was modified and can now slot square and hexagonal keyways. Documentation available. An on-site inspection is possible. Fgsdpfx Abey Hvqrs Nsh