Used Thread for sale (2,238)

Condition: used, Ball valve internal thread -Internal thread: 2 -Full: passage, full ball Iedpfob A Sa Uox Agzjtr -Number: 24x available -Price: per piece -Weight: 1 kg

Condition: new, Year of construction: 2024, functionality: fully functional, type of input current: three-phase, total width: 1,800 mm, total length: 2,000 mm, total height: 1,500 mm, overall weight: 5,000 kg, warranty duration: 12 months, spindle diameter: 80 mm, roll diameter: 240 mm, roll width: 220 mm, thread length: 6,000 mm, workpiece diameter (max.): 120 mm, new machine for immediate delivery Itsdpfx Agouafruezsr

Year of construction: 1995, condition: ready for operation (used), 1 brought threading machine Manufacturer: Microtap Type: Megatap II Year of manufacture: 1995 Technical data: - Operating voltage, machine standard 230 V ± 10 % version microtap II - Frequency 50/60 Hz - Power consumption - Version G8/ 230 V 16 A / T (slow) - Compressed air unlubricated (ZAP - operation) min. 200 kPa (2 bar) max. 800 kPa (8 bar) - Compressed air unlubricated (MMS - operation) min. 400 kPa (4 bar) max. 800 kPa (8 bar) - Torque - Version G8 50 to 700 Ncm - Rotational speed - Version G8 300 up to 3.000 min-1 Itedpfoim Iqqsx Agzjr - Spindle stroke version Version G8 max. 85 mm - achievable thread depth version G8 max. 75 mm - achievable accuracy of depth measurement 0,1 mm (without consideration of the tolerance of the tool holder) Operating instructions Dimensions, weights - Dimensions over all approx.: (L (depth) x W x H in mm) Version G8/14/16 - with column 750 mm at max. adjustment travel 544 x 312 x 1047 - With a higher column, the height dimension increases by the difference of the column height. - Machine type Spindle Tool holder Version G8 Taper B12 SZS / Quick change system SWS1 Working ranges - Adjustment travel of the columns in Z-direction (without tool) Column type Version G5 Version G8 Version G14 /16 750 mm approx. 430 mm approx. 400 mm approx. 388 mm - Thread capacity (cutting) - Version G8 M 2.5 - M 8 (X5CrNi189) (Metric ISO standard thread; M 2.5 - M 10 (9SMn28)

Condition: used, Year of construction: 2001, functionality: fully functional, Thread sewing machine equipped with a 4D sheet feeder: 4 openings above, 4 openings below, and LAP system for section opening with claw. Monitor, electronic programming of the openings, automatic pre-setup, thread cutter. Itedjxdmxlepfx Agzjr

Condition: excellent (used), thread dia. 5 - 200 mm grinding length 500 mm thread pitch 0,25 - 6 mm clamping length max. 850 mm grinding wheel diameter 350 mm centre height 105 mm thread M2 - M149 thread - inch 3/32 - 4 inch. inclination li/re +/-10 ° Itodpfewvl H Uex Agzer total power requirement 6 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 2,5 x 1,7 x 1,5 m

Condition: used, Year of construction: 1991, workpiece diameter 30 mm threading length 110 mm thread pitch 0,5-2,75 mm/GG total power requirement 4,5 kW weight of the machine ca. 1,7 t Ijdpfet Hwzcex Agzjtr dimensions of the machine ca. m

Condition: used, Thread cutting dies, replacement dies, thread cutting heads with chasers, thread cutting stock, thread cutting machine, pipe thread cutter Itsdpfxod Aay Do Agzer -various: thread cutting sizes -Price: complete -Weight: 12 kg

Year of construction: 1990, condition: used, spindle taper 2 x SK 40 forward bearing diameter 110 mm milling head speed 100 - 4500 U/min milling drive 5,1 kW workpiece length - max. 830 mm workpiece dia. with double equipment max. 135 mm taper diameter 78 g6 mm centre height 260 mm turning speed range - stepless max. 15 U/min distance of spindles 135 mm spindle nose DIN 55026 Gr. 5 stroke of workpiece slide 810 mm Feed speed max. 6 m/min. surface area 200 x 1750 mm tool post (Z-axis) stroke of tool slide 120 mm Itjdpetqqqdsfx Agzsr Feed speed max. 2 m/min. column movement 200 mm tail stock tailstock quill stroke 100 mm morse taper 3 MK centre height 260 mm axial distance of the quills 135 mm passage of steadyrest 40 - 80 mm control SIEMENS SINUMERIK 810 weight of the machine ca. 6,5 t dimensions of the machine ca. 3,20 x 2,66 x 1,76 m with SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coolant

Year of construction: 1968, condition: good (used), 1 used thread whirling machine for lathes make Burgsmüller Isdopit Afjpfx Agzotr type L 2 serial number 68/1724

Condition: new, High performance threading machine with lead screw and optimal safety device against tool breakage. Program for single or continuous cycle. Electronically controlled motor braking for single cycle. Easy lead screw change by quick coupling. Technical data UNIMAX 3T GL: Threading capacity: M 4 - M20 Thread per hour: 800 Normal drilling capacity: 28 mm spindle: MK 3 thread depth: 90 mm drilling depth: 120 mm throat: 260 mm spindle / table: 220 - 600 mm Itodpfsgv I Unsx Agzor table surface: 420 x 390 mm T-slot width: 14 mm column diameter: 110 mm total height: 1.300 mm weight: 250 kg special motor: 0,9 kW Mains connection: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packing: C - 160x75x125 cm Other accessories / options: Lead screw, tap holder, outfeed switch, forced-ventilated motor, die holder, flange quill, foot pulse button, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Condition: excellent (used), max. workpiece diameter 600 mm threading length 7000 mm max. module 8 / 12 min. module 1 swival range ° diameter of hob 63 - 140 mm spindle turning speed - stepless 45 - 450 U/min weight of the machine ca. 12,5 t dimensions of the machine ca. 9,0 x 2,0 x 2,2 m Condition: In good condition, checked and partially overhauled by a specialist. The existing milling head was replaced by an overhauled universal milling head. Furnishing: Differential for inclined machining Automatic indexing device (indexing discs changeable!) For multi-wedge, multi-thread parts, then extensive bushings, support rollers and around 70 Itjdpswgizdofx Agzjr Change gears. Conversion of the milling head speed to a frequency converter with corresponding powerful motor is a great thing and saves a lot of set-up time. Equipment: Around 70 change gears, 3 bushing sticks of different sizes, around 20 Bushings, 2 roller mountings, 2 tips for direct mounting on the Clamping spindle, 350 mm chuck, 2 spare part disks.

Condition: used, Year of construction: 1986, workpiece diameter 460 mm Iodpfst H Smtox Agzjtr threading length 900 mm thread pitch 100 mm total power requirement 10 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter Itodpfx Agec T Nx Njzer -Inch threaded jaws: 1/2 "- 1 1/2" inches -Weight: 9.5 kg

Year of construction: 1974, condition: reconditioned (used), Capacity (mm): M8x60/80 Production (max): 300 ppm Itsdpfxjh Rabks Agzor

Condition: excellent (used), Thread cutting unit with lead screw Currently, a lead screw with a pitch of 0.8 mm (M5) is installed. Ijdpfew N E R Eox Agzetr Spindle speed 750 rpm max. stroke: 80 mm With UC-21U controller Very good condition

Condition: new, High performance threading machine with lead screw device. Safety device against tool breakage. Programs for single and continuous cycle, programmable thread depth, piece counter, LED light and electronically controlled motor brake for the single cycle. Easy change of lead screw by quick coupling. Normal drilling capacity 15 mm Thread cutting capacity M 3 - M 10 Threads per hour 1.000 Spindle MK 2 Thread depth 60 mm Drilling depth 100 mm Throat 250 mm distance spindle/table 185 to 541 mm Table surface 340 x 445 mm T-slot width 12 mm Column diameter 90 mm Total height 1,050 mm Weight 120 kg Special motor 0,55 kW Power supply 400 V/50 Hz BT 18 GL M00033 4 spindle speeds 320 min-1 Ijdpfxofrlnde Agzetr 560 min-1 1,000 min-1 1,600 min-1 Also available as pillar drilling machine BS 18 GL (M00034)! Digital display for speed as standard. 200 mm longer column 14154

Condition: good (used), Year of construction: 1973, pressure 0,5 - 10 t max. workpiece diameter 2 - 50 mm threading length 2000 mm Iedpfxevpaake Agzjtr pitch in mm 3 mm diameter of roll spindle taper 54 tool diameter 145 mm roll spindle turning speed range 41 - 129 U/min stroke 0 - 8 mm total power requirement 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3 x 1,2 x 1,2 m

Year of construction: 1985, condition: used, workpiece diameter 50 mm threading length 100 mm thread pitch mm total power requirement 1 kW weight of the machine ca. 1500 kg dimensions of the machine ca. m Isdpfxjt Hwn Ne Agzotr

Condition: good (used), Max Diameter: M6 Max thread length: 42mm Max length of rods: 75mm Itodpfx Agjhtal Rjzor Year: 80's

Condition: excellent (used), pressure 0,5 - 20 t max. workpiece diameter 5 - 75 mm threading length 2000 mm pitch in mm 8 mm diameter of roll spindle taper 69,85 tool diameter 200 mm roll spindle turning speed range 20 - 90 U/min stroke 0 - 20 mm Itodpfxovpaa Rs Agzsr total power requirement 7,5 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 1,9 x 1,1 x 1,2 m

Condition: used, Year of construction: 2011, workpiece diameter 320 mm threading length 570 mm thread pitch 315 mm total power requirement 17 kW weight of the machine ca. 12 t Itedpfx Aget Hxbdjzer dimensions of the machine ca. m

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm threading length 3000 mm thread pitch 2-16 mm Itedpstzdyzjfx Agzer total power requirement 25 kW weight of the machine ca. 10,5 t dimensions of the machine ca. m

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm Itjdpfet Hw N Tjx Agzjr threading length 120 mm Control total power requirement 29 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m

Condition: used, Year of construction: 1979, workpiece diameter 320 mm threading length 300 mm thread pitch mm total power requirement 90 kW weight of the machine ca. 12000 kg dimensions of the machine ca. m Thread and worm grinder for steering worms Itedpfx Agjt Hwnpszer

Condition: used, Year of construction: 1985, thread dia. 254 mm grinding length 350 mm thread pitch 51 mm Control SIEMENS S 8 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _____ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm Itedpfxst Hw U Ae Agzjr thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg Accessories / Special Features * This is a programme controlled (SIEMENS S 8) internal thread and internal worm grinding machine , suitable for the grinding of ball screw nuts. * All movements are controlled by the SIEMENS programme control * Automatic infeed for grinding depth. * Automatic diamond roll profile dressing device, motorized by hydraulic motor,and device can be swivelled and mechanically adjusted lengthwise. * FISCHER Internal grinding spindle up to 30.000 rpm with oil and air lubrication and with Infinitely variable grinding spindle speeds. • 4-jaws chuck approx.. Ø 250 mm * Separate switch cabinet, separate hydraulic unit, oil drip pan, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.