Used Thread for sale (2,396)

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm Dsdpofg U Ttjfx Ap Isku table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 0,6 x 1,2 x 2,6 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, thread dia. M6 - M22 mm 60/200 U/min. 105 Nm Dodpfx Asfg U Skjp Isku air pressure 6 - 8 bar working area 400 - 2000 mm

Condition: new, thread dia. M3 - M12 mm 400 U/min. 28 Nm air pressure 6 - 8 bar Dsdpod Iinuofx Ap Ijku working area 150 - 1900 mm weight of the machine ca. 12 kg Pneumatic Tapping Machines for M3 - M12 thread, angle adjustable. 6 pcs. Keyless chuck with clutch. optional: Working table with T-slots: 750x600x650mm 990x700x800mm or. Magnetic base. Available up to max. M16, M22 and M33.

Condition: new, STAR ball screw Type: 1510-3-1607 Pitch: 5 mm Thread length: 2008 mm Overall spindle length: 2100 mm Dodpfx Apezcwkwo Ijku Thread diameter: 31 mm 4 pieces in stock.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 30,600 h, travel distance X-axis: 800 mm, wire diameter (max.): 0.33 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis +GF+ AGIECHARMILLES CUT 400 Sp was manufactured in 2017. It features a Wire Guide Set for Ø 0.250 mm and a Taper Tapering Kit for 45° taper cuts. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AGIECHARMILLES CUT 400 Sp machine we have for sale. Contact us for further details. Dedpfoz Hwt Asx Ap Isku - Overall Dimensions (L x W x H): 2670 x 2870 x 2645 mm- Total Weight without Dielectric: 6300 kg- Total Weight with Dielectric: 8040 kg- Max Noise Level: 76 dB- Sliding Door: Yes- Worktable Dimensions: 1240 x 800 mm- Max Workpiece Dimensions: 1450 x 900 x 510 mm- Max Workpiece Weight: 3000 kg- Max Dielectric Level: 520 mm- Axis Travel X, Y, Z: 800 x 550 x 510 mm- Axis Travel U, V: 800 x 550 mm- Taper Angle / Height: ±30°/510 mm (Option ±45°/510 mm)- Taper Tapering Kit: Kit for 45° taper cut (Kit für 45° Konikschnitt)- Measurement Resolution X, Y, U, V, Z: 0.05 µm- Axis Speed: 0...3000 mm/min- Dielectric Type: Deionized water- Dielectric Total Volume: 1700 L- Dielectric Temperature Control: Automatic setting ±1°C- Filter Cartridges: 4- Cooling System: Water / Water heat exchanger- Wire Diameter: Ø 0.2...0.33 mm- Standard Wire Guides: Closed guides Ø 0.25 mm- Wire Guide Set: Taper Expert Ø 0.250 mm (for CUT X00/FI X4)- Automatic Threading: Yes- Permissible Wire Spool Weights: 8-25 kg- Generator Type: CLEANCUT- Three-Phase Input Voltage: 380/400 V ±10%- Mains Frequency: 50 or 60 Hz- Max / Required Power: 12 kVA- Min Roughness: Ra 0.2 µm (carbide) / 0.28 µm (steel)- User Interface: AC CUT HMI- Operating System: Windows XP- Display: 15" LCD- Connectivity: E-Connectivity, Ethernet, USB- Operating Ambient Temperature: 15...30 °C (20 ± 1 °C for optimal precision)- Max Relative Humidity: 40...80%- Compressed Air: 6-7 bar

Condition: used, 4-spindle drilling head, adjustable multi-spindle drilling head, type V 604 G Manufacturer's number: 4220 Drilling capacity per spindle: 6 mm Spindle drives: 4 pieces Transmission ratio: 1:1 Spindle spacing (center of spindle to center of spindle diagonally): 45 to 138 mm Drilling head spindle drive: 6 x 20 mm Centering flange on the drive: Ø 89.7 mm, 6x M8 threaded holes, bolt circle = 105 mm Tool holder: Ø 6 mm collets Overall height from tool holder (bottom) to gearbox housing (outer edge, top): 218 mm - 4 spindle drives with collet chucks (collets are not included in the scope of supply) - 4 tool spindles, adjustable in steps by twisting within the spindle spacing Dimensions Ø x H: 170 x 218 mm Weight: 7.7 kg Good condition Dsdpfx Aez Hfclep Ioku

Condition: good (used), Code: 0493 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Dksdjz Ia T Uopfx Ap Isu Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, This vertical machining center, including the "Clamex unit," is for sale and has seen only a few hours of operation. The machine is being sold because we have switched to a nesting machine. In 2021, the machine was upgraded with a more powerful vacuum pump (16.3 m³). The machine also includes various vacuum clamps; we purchased several larger plates in addition to the standard equipment. Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 1200 mm (= max. opening) Material thickness: Z = 8 to 70 mm Max. contour milling dimension in X-direction without clamping: X = 1500 mm Max. contour milling dimension in Y-direction: Y = 985 mm, less milling cutter radius Max. drilling dimension horizontally in X-direction: H = 1168 mm Z-axis stroke: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Milling spindle 7830, power: 7.5 kW (S6), air-cooled with HSK-F 63 tool holder n(max.) = 1000 - 24,000 min-1, continuously adjustable with collet chuck with HSK shank, ceramic ball bearing Dkodoz In Ugspfx Ap Iou (hybrid bearing), tool weight max. 6 kg (incl. holder) Tools: max. Ø 110 mm, tool length max. 80 mm Tool changer 7887, 6-position magazine - pick-up system, pneumatic, max. Ø tool: Ø 110 mm Maximum tool weight: > 5 kg per tool or 30 kg when fully loaded Can be equipped with collet chuck with HSK shank Tool changer 7874, 1-position aggregate magazine, swiveling in X and Y directions, only for special bevel gear 7869 with HSK holder Vertical spindles can be activated individually Arrangement in L-shape, 5 in X and 4(5) in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Direction of rotation: alternating right/left n(max.) 1000 - 4400 min-1, continuously adjustable Holder: M 10 thread - parallel seat 11 mm without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction 1 double drilling spindle in Y-direction Holder: M 10 thread, parallel seat 11 mm Total drill length max. 63 mm from mounting end without tool, without holder Sawing unit Integrated sawing unit for sawing/grooving in X-direction n(max.) 1000 - 5650 min-1, continuously adjustable Tool holder: A max Ø = 120 mm, I Ø = 20 mm, B = max. 4.0 mm 4-axis “CLAMEX” tool set - Incl. original tool set consisting of 2 pcs. P-system slot milling cutter, DP (diamond) 100.4x7x30mm, Z3, NLA 4/6,6/48mm 1 pc. Milling arbor for P-system slot milling cutter S20x50mm, d=30, L=102, DTK 48mm 1 pc. Milling arbor for P-system slot milling cutter S16x55mm, d=30, L=68, DTK 48mm 1 pc. CNC drill 6mm for Clamex P, L= 57.5 / shank 10x27 / left 1 pc. Adapter for drill with shank d= 10 mm (left) 1 pc. Collet DIN 6388 form B, double slit, size 25 Clamping diameter 20, for HSK-F 63 holders

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Dksdexgqmxepfx Ap Iju Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: used, Year of construction: 1999, Machine number: 9114108 Weight (approx.): 150 kg Motor power: 0.71 / 1.26 kW Overhang – stand to drilling center: 600 mm Max. material height: 200 mm Table width: 1000 mm Number of drilling spindles: 4 Dksdpfxezd Hnto Ap Iju Drill chuck: Screw-in thread Drilling depth limitation: Yes Drilling stroke: 70 mm Speeds: 1400 / 2800 rpm Workpiece clamp: Yes Drilling feed: Hand lever Working height or feed table height: 890 mm, with lighting Storage location: Nattheim

Condition: good (used), Year of construction: 2016, Ref. -No.: 10411 Manufacturer: BROTHER Type: Speedio S700X1 Year of construction: 2016 Type of control: CNC-Steuerung Control: BROTHER CNC Storage location: Halberstadt Country of origin: Germany X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Dksdszc Dyropfx Ap Iju Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Acceleration time: 0,30 sec Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Further information: THREAD Speed: 6,000 rpm Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10588 Manufacturer: HEDELIUS Type: CB 70 - 3200 Year of construction: 2000 Type of control: CNC-Steuerung Control: Heidenhain TNC Storage location: Halberstadt Country of origin: Germany Machine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm) X-Travel: 3200 mm Y-Travel: 720 mm Z-Travel: 600 mm Table Height: 900 mm Number of T-slots: 5 Max. Workpiece Weight: 3000 kg Max. Tool Length: 330 mm Clamping Area: 3900 x 650 mm T - groove width: 18 mm Dkodpfxozc D Atj Ap Iju T - slot spacing: 125 mm Tool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPM Max. Torque: 102 x 240 Nm Feed Speeds X/Y/Z Axis: 30000 mm / min Rapid Travel X/Y/Z: 30 / 30 / 30 mm / min Total Power Requirement: 50 kW Borehole Diameter: 28 x 44 mm Max. Feed force: 9000 / 9000 / 9000 kN Distance between spindle nose and table: 140 - 740 mm Number of tools: 30 Pcs Tool clamping: Tellerfeder Max. milling capacity: 400 x 600 Max. thread diameter: M20 x M30 mm coolant: 250 bar Further information: - L = 7.50 m Special accessory: automatic door - H = 3.60 m Special accessory: full cladding of working area - Ø 125 mm only with free side spaces 35 mm The machine can be viewed under power by arrangement.

Condition: used, RMS Vibration exciter / vibration testing system RMS SW 6005 Vibration exciter sold exclusively as a source of spare parts A used vibration exciter from RMS Regelungs- und Messtechnik is for sale. The device is explicitly sold solely as a source of spare parts. Functionality has not been tested. Operational readiness or completeness is not guaranteed. Technical data: Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Further technical specifications on the nameplate are partially damaged and not completely clearly legible. Dsdpfx Apjz Iqh Ae Ijku Equipment: RMS vibration exciter SW 6005 Mounting plate with threaded holes Lateral pneumatic suspension elements Lifting/lowering device Control and connection housing Transport/lifting eyes Base frame Existing mounting and supply components Accessories as shown in the pictures Application areas: Spare parts sourcing Maintenance of existing vibration testing systems Supply of spare parts and sub-assemblies Retrofit and repair projects Scope of supply: 1 × RMS SW 6005 vibration exciter Existing mounting and supply components Accessories as shown in the pictures Weight: approx. 700 kg Condition: Used Optical condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No guarantee for function, operational readiness, or completeness. Shipping or freight shipping possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: good (used), Automatic strapping machine Mosca RO-TRP-4 Features: Dkedpfx Apet Srxge Iou • Can be integrated into any line • Direct transport system with frequency control, adjustable from 0.15 – 0.8 m/s • IFM Ecomat 100 control unit with display • Hot-welding system with electronic heating control • Fully automatic band threading system • Adjustable strapping distance via the control panel • Adjustable strap tension • Band end detection with ejection of remaining material • Automatic ejection of strap rings in case of incorrect strapping • Structure painted blue – RAL 5010 The passage opening is 74 cm wide and 53 cm high. Strapping performance: Up to 46 straps / min. Electrical power: 400 V, 50/60 Hz, 3 phases Consumption: 1.5 kVA Weight: 300 kg. You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Granite measuring plate, vibration-isolated, scribing plate Granite measuring plate, scribing plate, measuring plate made of gray-black granite as a base for assembly, inspection, and laboratory purposes. Features: Plate size 2000 x 1450 x 400 mm (W x D x H) Scribing plate, weight approx. 4000 kg Outer edges surface-ground Stainless steel threaded and clearance holes Subframe with vibration isolation (membrane air spring isolators) Dksdpjh Ri Aujfx Ap Iju You can find other measuring plates in different sizes – new and used – in our shop! International shipping costs available upon request!

Condition: refurbished (used), Year of construction: 2017, BUCK TBFZ 3000 CNC incl. tools and clamping wedges The machine has been comprehensively overhauled and modernized. Conversion to Heidenhain iTNC530 including completely new control cabinet Travel: X-3000 mm, Y-1.500 mm, Z-1500 mm Z1: 500 mm A-axis: +/- 20° Depth of drilling in a single pass Z: 1.500 mm Drill depth by readjusting Z1: 2.000 mm Drilling performance with single-lip internal thread drilling tools: 3-40 mm diameter NC rotary table 360° B-axis: 2.500 x 2.300 mm max. Tischladung: 25.000 kg Internal coolant supply (IKZ): 70/100 bar Dkodpfez Ntr Isx Ap Ieu Spindle drive power at 60%: 20.5 kW Express travel X/Y/Z: 15.000 mm/min Spindle speed: 0-6,000 RPM Control: Heidenhain iTNC530 tool holder: SK50 Space requirements: approx. 8.5 m x 8.5 m x 3.5 m machine weight: approx. 24,000 kg max. table load: 25.000 kg

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, GF AgieCharmilles CUT 2000X Year of manufacture: 2018 Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm, including option KIT 50 Includes automatic wire changer AWC Wire EDM machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes glass scales for X and Y axes VISION 5 control 15" LCD color screen, jog shuttle and mouse Includes Conic-Plus option for improved taper Includes Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. We would be happy to perform an individual test cut. Dkedsz I Nbbopfx Ap Ieu We also offer on-site commissioning and training for this machine.

Condition: used, RMS Vibration exciter / Vibration testing system Dedpfoz Iqigex Ap Ijku RMS SW 6005 Vibration exciter sold exclusively as a source of spare parts. For sale is a used vibration exciter from RMS Regelungs- und Messtechnik. The device is explicitly sold solely as a source of spare parts. Functionality has not been tested. Operational readiness or completeness is not guaranteed. Technical data: Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Year of manufacture: 1983 Voltage: 30 V Current: 200 A Force: 11,770 N Vibration amplitude: ± 13 mm Speed: 1.2 m/s Acceleration: 100 g Weight: approx. 700 kg (estimated) Equipment: RMS vibration exciter SW 6005 Mounting / clamping surface with threaded holes Pneumatic vibration isolation Lateral spring elements Pneumatic components Operating and connection housing Cooling / air connection with hose Transport / lifting eyes Solid base frame Existing mounting and supply components Accessories as shown in the pictures Application areas: Spare parts sourcing Maintenance of existing vibration testing systems Supply of spare parts and subassemblies Reconstruction and repair projects Scope of delivery: 1 × RMS SW 6005 vibration exciter Existing mounting and supply components Cooling / air hose as shown in the pictures Accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No guarantee for functionality, operational readiness, or completeness. Shipping or freight shipping is possible. Subject to changes, errors, and prior sale. We are happy to answer any further questions by phone.

Condition: used, Year of construction: 1987, spindle bore: 105 mm, Parallel Lathe PBR type TM-30 Between points: 3000 mm Maxi Ø on bench620 mm Maxi Ø over saddle: 400 mm Maxi diameter in brocken bed: 860 mm Spindle diameter: Ø 105 mm Spindle speed: from 15 to 1500 RPM 3-jaws chuck Ø 315 mm Year of construction: 1987 Motor: 15 CV Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Equipped with: one 3-points fixed steady Rapid Feed non-functional: 1 way Automatic travel X + Z is not functionnal Voltage: 380 V Dodpfx Asz Iz N Dsp Ieku Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4,5 T

Condition: used, Parallel Lathe SOCOMO type STAR 305 Between points: 700 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 175 mm Spindle diameter: Ø 36 mm Rotation: from 70 to 2000 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Dkjdjz Iz Duepfx Ap Iou Tailstock: CM3 Auto feeds longitudinal + transversal Length: 1800 mm Depth: 800 mm Total height: 1200 mm Weight: approx 1 T

Condition: used, Parallel Lathe GEMA LZ 160 Between points: 1000 mm Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Spindle speed: from 48 to 1500 RPM TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 800 x 1300 mm Dkodpjz Iz Efofx Ap Ieu Weight: approx 1,3 T

Condition: new, Jack Z7 Powerful Triple Feed The Z7 features synchronized movement of the feed dog, needle, and presser foot – specifically designed for heavy-duty materials such as car seats, steering wheels, upholstered furniture, bags, and mattresses. Precise fabric guidance and consistent stitch quality, even under maximum load. Artificial Intelligence An advanced AI chip instantly recognizes changes in material thickness and resistance and transmits this data directly to the motor. This automatically increases the piercing force and torque – for smoother sewing and maximum efficiency. Thickness Sensor The integrated sensor detects differences in fabric thickness and automatically activates the second alternating presser feet and the additional thread tension system – for perfect seams from start to finish. Dual Alternating Presser Feet Two adjustment knobs control the dual alternating presser foot system, which operates automatically or manually, depending on the detected fabric overlap or thickness. Additional Thread Tension System A second thread tension device can also be activated automatically or manually to adapt precisely to the fabric layers and ensure optimal tension. Dual Stitch Length Function When sewing corners or dense seams that require shorter stitches, the Z7 automatically switches via a button press – no manual readjustment is necessary. Touchscreen Control Panel The intuitive touch panel with voice guidance and symbol display enables quick activation or deactivation of functions such as backstitching, presser foot lifting, thread trimming, and more. Holding down a button accesses the extended function configuration. Electronic Handwheel Precise micro-adjustments are possible with the integrated digital handwheel – half stitch with a single click! Function Buttons Ergonomically mounted on the machine head; one button can be individually programmed via the control panel. 850W High-Performance Motor Dedsz I Tfdspfx Ap Isku The most powerful motor in its class – with 13% more power than comparable triple feed machines. Pneumatic Presser Foot Lifter Equipped with a dual, alternating pneumatic presser foot lifting system for greater efficiency and comfort. XXL Hook System Suitable for thick threads and long seams – with a 32 mm hook, 73% larger than standard 2X types. Guarantees durability and maximum performance.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,325 mm, total length: 3,100 mm, total width: 2,800 mm, overall weight: 5,000 kg, Equipment: cooling unit, GF AgieCharmilles CUT 30P – Wire EDM machine, manufactured in 2011 Wire EDM machine for tool and die making Djdpfx Aoz I Ritjp Ieku Technical data & features: - Travel ranges X/Y/Z: 600 × 400 × 350 mm - U/V axes: ± 50 mm - Max. workpiece size: 1,050 × 800 × 350 mm - Max. workpiece weight: 1,000 kg - Tapered machining: up to ± 25° at 80 mm height - Wire diameter: 0.15–0.30 mm, wire spool: 25 kg - Automatic wire feeding and re-threading - Glass scales, automatic wire tensioning and collision protection - Surface quality: up to Ra < 0.25 µm - Windows-based control system with 15″ LCD, DXF import and 3D graphics check - Connection power: 9 kVA The machine has already been cleaned, overhauled and tested. You are welcome to inspect the machine on site and test it under power. We can also offer transport, commissioning and training as additional services. Contact us for a customized offer.

Condition: used, Year of construction: 2021, Drilling capacity in St 60 55 mm threading in St 60 M 30 M 36 Short spindle MK 4 spindle stroke 140 mm throat 300 mm column diameter 145 mm Machine table - usable table surface 615x430 mm Dkodpfxsz I Ub Ho Ap Iju T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 150/735 mm feed 0,1 + 0,3 mm/U 0 stufenlos Spindle Speed 70-2.400 U/min. engine 3,0 kW machine weight ab. 380 kg Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: excellent (used), Year of construction: 2021, EMCO E350, SIEMENS 828D, 10,000 RPM 3-axis CNC milling machine with integrated 20-position tool magazine. Control: SIEMENS 828D Spindle: Speed: 10,000 RPM Spindle power: 7 kW Torque: 41 Nm Tool holder: SK30 ISO7388-1 (DIN 69871) Pull stud: ISO7388-3 (DIN69872 Type A) Travel: X=350mm, Y=250mm, Z=300mm Spindle nose to table distance: 120-420mm Rapid traverse X, Y, Z: 24 m/min Table: Cast iron table with T-slots Number - Width - Pitch: 5 - 12 - 45 Clamping area: 520 x 300 mm Maximum table load: 100 kg Tool changer: Drum magazine with 20 tool positions Tool change time (tool to tool): 2.5 seconds Coolant: Standard pump 3.5 bar Work area lighting: Via 1 halogen spotlight Standard equipment: o Central lubrication o Thread cutting without collet o Spindle blow-out device for cleaning the tool holder during tool changes o Coolant tank 140 liters o Vibration-damping leveling feet o Mounting angles and heavy-duty anchors Year of manufacture: 2021 Machine No. Q4A211601 Includes: Control language: Italian NC handwheel, portable Fastening material ET420/345/332 E45/65 MT45/65 Dkedpfx Ajz Nm A Tjp Isu Leveling element FK03/NBR05/NBR9014 Heavy-duty anchor FH18x80/50 B M12 Fastening material High-pressure coolant system 50Hz Coolant gun Warning light, LED, 3-way, side-mounted E350 Operating manual / ITALIAN