Used Abus Zlk for sale (95)

Condition: good (used), Year of construction: 1984, Indoor crane, crane, push carriage, crane undercarriage, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage for single-girder bridge crane, headcarriage for double-girder bridge crane, double-girder overhead travelling crane -Manufacturer: ABUS, 1 set of endcarriages for double girder overhead crane -Type: ZLK -Drive motor: ABUS 0.12/0.55 Kw -Carrier rollers: Ø 200 mm / groove width 60 mm -Dimensions: see photo technical drawing Bedpfx Aevt Rapogcedk -Transport dimensions: 2970/855/H720 mm -Weight: 640 kg

Condition: excellent (used), Year of construction: 2008, overall weight: 120,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Little used / Under power / Direct availebel Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Hoist trolley:5/20 M/Min Bdedpfx Agsxmf R Socsk Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 18 / 405156 / 1, overall weight: 7,490 kg, total width: 16,480 mm, load capacity: 14,000 kg, DGUV certified until: 12/2025, lifting height: 6,000 mm, Equipment: documentation/manual, ABUS overhead travelling crane with radio control, 14,000 kg Double-girder overhead crane H8 Double-girder crane ABUS 14.0 t Bdjdoxywwqopfx Agcok Year of manufacture: 2007 / Radio control retrofit in 2022 Span: 16,480 mm Further data available in the documents attached.

Year of construction: 1984, condition: used, weight max. 20 t clamping width 15065 mm stroke / mm ABUS electric wire rope hoist type: GM5200H6 - 161.41.103.D Span width: 15065mm Rope - nominal diameter: 14.0 mm Rope length: 47.95 metre Construction: Special electric hoist rope SKZ 8-P Surface of wires: galvanised Construction: low tension Type of lay / direction of lay: cross lay / right hand lay Nominal strength of single wires: 2160 N/mm² Calculated breaking load: 240.0 KN Minimum breaking load: 209.5 KN Number of load-bearing wires in the outer strands: 152 Trolley Bdjdpsudditsfx Agcsk Year of manufacture: 2007 Trolley track: 1600mm Trolley weight: 1260kg Number of wheels: 4 pieces Running wheel diameter: 200mm Running wheel rotation: 52mm Operation: Floor operation via push-button switch Control: Electric Cross travel trolley Speed: 5.0/20.0 m/min Power: 14 /.65kW Duty cycle: 20/ 30 %ED Protection class: IP 55 Brake: Disc brake Lifting gear Speed: 4.00 / .66 m/min Power: 15.10 / 2.40 kW Duty cycle: 30/20%ED Protection class: IP 55 Brake:Disc brake

Condition: excellent (used), Year of construction: 2010, Portal crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system Bedpfxew R Sv Ds Agcodk -Equipment: with ABUS GM6 1250.6-1 electric chain hoist, floor operation -Load capacity: 1250 kg -Track gauge: 8.7 m -Installation dimensions: 9280 x 1740 x height 3140 mm -Transport dimensions: 9280/850/H250 mm 1740/290/H320 mm -Weight: 1195 kg

Condition: excellent (used), For sale: complete pillar jib crane with a professional ABUS GM3 chain hoist, 500 kg lifting capacity. Sturdy German construction – perfect for lifting and handling machines, moulds, and workpieces in factory halls, workshops, and warehouses. - ABUS GM3 Hoist Specifications: • Capacity: 500 kg • Model: GM3 500.6–111 • Year of manufacture: 1997 • Lifting speeds: 1.5 / 6.0 m/min (two-speed) • Power supply: 3-phase 380–415 V / 50 Hz • Motor: 0.11 / 0.50 kW • Electromagnetic brake • Pendant control station - Jib Crane Specifications: • Total jib length: 300 cm • Working radius: approx. 270 cm • Type: column- / wall-mounted • Steel, rigid construction Bdsdew Rddyjpfx Agcjk • Manual slewing • Complete with trolley and cables ——— - Why choose this unit? • Renowned ABUS brand – one of Europe's leading crane manufacturers • Complete set, ready for installation • Ideal for use with machining centres, lathes, welding stations • 100% industrial-grade setup – not a DIY store toy - The set includes: • ABUS GM3 hoist, 500 kg • Pendant control • 3 m jib arm • Travel trolley • All wiring and accessories as shown in the photos

Condition: used, functionality: fully functional, Year of construction: 2008, overall weight: 37,700 kg, total height: 2,927 mm, total length: 29,100 mm, total width: 6,344 mm, load capacity: 40,000 kg, power: 32 kW (43.51 HP), main lifting speed: 8,000 mm/min, fine lifting speed: 1,300 mm/s, working height: 15,000 mm, clear span: 28,800 mm, Equipment: documentation/manual, Lemmens / Abus double-girder overhead travelling crane with Abus GM7000 hoist, year of manufacture 2008, lifting capacity 40,000 kg, available lifting height 15 metres, equipped with Abus joystick controls and ramshorn hook, well maintained, extensively documented, will be taken out of service in working condition. Speeds: - Crane travel: 6.0 - 60.0 m/min (frequency controlled) - Trolley travel: 7.5 / 30 m/min Bodpfx Agox A A T Ajcjdk - Hoisting/lowering: 1.3 - 8.0 m/min (frequency controlled) Required height from crane runway: 2,142 mm The crane will be dismantled for road transport. Transport must be arranged by the buyer (2x trucks for 29 m length, 1x truck for hoist and end carriages). A total of 8 identical cranes available. Keywords: overhead crane, double-girder crane, cranes, workshop crane, warehouse crane, hoist, bridge crane, krane, laufkrane, hallenkran, hallenkranen, hallenkrane, brückenkran, brückenkranen, brückenkrane, werkstattkrane, lagerkrane, hebezeuge, cranes, overhead crane, universal crane, hoist, Abus, Demag, Kone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: NOH336-41, ABUS ELV overhead crane, crane runway, bridge crane, workshop crane Load capacity / lifting capacity: 5t - 5000kg Span: 12,990 mm, outer dimension approx. 13,250 mm Year of manufacture: 2005 with radio remote control Lifting height: 6 m Construction height (top of crane to hook): approx. 850 mm Main girder length incl. buffers: approx. 260 cm Crane is dismantled and immediately available Very good condition, inspection logbook available Column-mounted and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agent possible, please inquire with postcode Bjdpsx Azrdjfx Agcedk Collection preferred

Condition: used, Price: On request Overhead crane Abus Lifting capacity: 6300kg Lifting height: 7500mm Span: 19000mm Total crane weight: +/- 4000kg Be disassembled and prepared for transport by us. - Documentation available: No - CE certificate present: No Financial information Bjdpfjwh Niqsx Agcodk VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2011, arm length 2500 mm total column height 3100 mmm weight max. in kg 125 kg swivelling range 270 Grad height over floor 3254 mm weight 945 kg ABUS SV pillar jib crane with chain storage and electric ABUS chain hoist, Bdsdpfjvrk Ahsx Agcsk inspection book available. Crane is dismantled and ready for shipping - see last photo. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2011, Column jib crane, overhead crane, workstation crane -Manufacturer: DEMAG, Column jib crane, lifting capacity 500 kg -Large base plate: 1000 x 1000 mm, requires no foundation -Protrusion: 6,050 mm -Total height: 3610 mm -Hook height: mm -Swivel range: 270° Bdjdpfx Agjxzt Smocsk -Chain hoist: can be supplied for an additional charge -Transport dimensions: 6330/1000/H1500 mm -Weight: 1020 kg

Condition: used, Electric chain hoist, electric lifting unit, crane ABUS type FN-3 Load capacity: 125 kg Hook path: 4 meters Lifting speed: 7.2 m/min Fine lifting speed: 1.8 m/min 1 load chain Bdedoxcil Sjpfx Agcsk

Condition: used, machine/vehicle number: 001634U, For Sale Used single-girder overhead crane ± 11.690mm x 10t Bdedpfxjw Ighcs Agcsk

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: NOH337-17, ABUS ELV crane kit, crane runway, bridge crane, indoor crane Load capacity / lifting capacity: 10t - 10,000kg Runway gauge: 12,990mm, overall external length approx. 13,250mm Year of manufacture: 1993, with radio remote control Lifting height: 6m Construction height (top of crane to hook): approx. 950mm End carriage length with buffer: approx. 260cm Bdsdoxz Tvrspfx Agcok Crane is dismantled and immediately available Very good condition, inspection book is available Pillar jib cranes and wall-mounted jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder possible, please enquire with postal code Collection preferred

Condition: used, Year of construction: 1988, Year ca. 1988 arm length 2000 mm weight max. in kg max. 1000 kg height of hook max. 2000 mm WITHOUT LIFTING DEVICE . +++++ Bedpfx Agoidrhyocedk Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Due to cessation of operations from 2026, ABUS pillar jib crane for sale Bedpfx Agjxxtdqscsdk 500 kg lifting capacity

Condition: good (used), Year of construction: 2003, ABUS column-mounted slewing crane Load capacity: 100 kg Lifting speed: 12.00 m/min Motor: 0.43 kW Manual operation Slewing arm outreach: 2.9 m Bdodsxr Aq Tjpfx Agcek Column height: 2.5 m

Condition: used, Year of construction: 2000, Technical details: lifting capacity: 1,0 t Bedpfsu Nvmdex Agcjdk Arm length: ca. 5000 mm height lower edge cantilever arm: 3200 mm cantilever arm length from center column: 4500 mm column diameter: 406 mm rotation: 120° ° crane classification: DIN 15018 H2B3 dimensions L x W x H: Kran: 4,62 x 0,62 x 3,5 m dimensions L x W x H: Ausleger: 7,6 x 0,66 x 0,37 m The slewing pillar crane consists of the following main groups: Pedestal boom (transport dimensions L: 7600mm x W: 660mm x H: 370mm) Hoisting gear: Balkancar type MB 093n, lifting height 4 meters; load chain type 7,2 x 21 double chain; hook/buckle with rope safety, pendant control Type 071/53 Slewing operation manual outreach column to crane hook = 4.000mm height of column = 3.200mm; running width on jib = 180mm Column base flange Ø 700mm; pitch circle Ø 520mm, 12 holes Ø 31mm *

Condition: good (used), functionality: fully functional, -KOM 3027- On offer here is a fully functional ABUS gantry crane. Attention: Special feature: Operation on the crane hook. Technical data: maximum load: 160 kg Length of the rail: approx. 7,500 mm Bodsu Hy Sxopfx Agcjdk Width of the rail: approx. 2,800 mm

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: NOH375-48, 1 ABUS LW Wall-Mounted Slewing Crane, 250 kg load capacity / lifting capacity Jib length 7 m, 250 kg load capacity Equipped with Abus GM chain hoist, 250 kg load capacity Weight incl. wall bracket approx. 350 kg Bedpfxsxz Tuzo Agcedk Complete with chain hoist, cable trolley, travel gear, and small parts Slewing range 270° Inspection logbook available Item location: 75053 Gondelsheim System is fully dismantled and immediately available Shipping by freight forwarder or pickup Please inquire for shipping costs based on postal code

Condition: like new (used), functionality: fully functional, machine/vehicle number: 17612, Year of construction: 2023, operating hours: 2 h, load capacity: 2,000 kg, ABUS double-girder crane ZHB-X 2t x 6030 (HB250). Classification: S3. Crane girder length: 6030 mm, crane span: 6290 mm. Crane dismantled and ready for transport. Price includes supports. Sale price without supports: €26,729 Bjdpfxjxl A I Ss Agcsdk

Condition: used, Year of construction: 1995, Technical details: lifting capacity: 3,2 t lift: - mm span width: 5300 mm stroke speed: 5,0 m/min rope diameter: 6,5 mm precise lift: 0,80 m/min electric control: ja lifting height max. hook position: 6 m travel of hook: 6000 mm total power requirement: 13,6 kW weight of the machine ca.: 5,3 t transport dimensions LxWxH: ca. 6,8 x 2,35 x 1,5 mit 4 Paletten m Crane classification DIN 15018 H2 B3 Crane trolley: -engine number GE 1348 -Drive unit group: 1Am -4x wheels, travel wheel Ø 100mm -fine crane travel 5.0 m/min. -Crane travel 20.0 m/min. -disc brake Trolley undercarriage: -Speed 20.0 / 5.0 m/min. -power .12 / .03 kW Lifting gear Abus -FDB GM 800.3H06/S12873E -load capacity 3200 kg -speed 5.0 / 0.80 m/min. -Power 3.20 / 0.45 kW (50ED) -Hook path 6.0 m - Rope Ø 6.5 mm Bjdewm Ivtjpfx Agcsdk Floor operation via push-button switch, electric i.D. *

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: ROD268, ABUS overhead travelling crane, crane runway, bridge crane, hall crane, crane Bdedexmuvqopfx Agcsk Load capacity / lifting capacity: 2 t - 2000 kg Span: 5550 mm, external dimension approx. 5700 mm Year of manufacture: 1989 with pendant control Lifting height: 6 m Hoist: GM820 F6 Overall height (top of crane to hook): approx. 610 mm End carriage length with buffer: approx. 220 cm Including 7 m HEB200 running rails and 7 m conductor rail The crane is dismantled and immediately available Very good condition, inspection book available Column slewing cranes and wall-mounted slewing cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight carrier is possible—please inquire with your postal code Collection preferred

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: ROD239, ABUS overhead crane runway bridge crane hall crane crane Load capacity / lifting capacity: 1t - 1000kg Track gauge: 6550mm, external dimension approx. 6700mm Year of manufacture: 1989 with floor control Lifting height: 6m Hoist: GM810 F6 Construction height from top edge of crane to hook approx. 610mm End carriage length with buffer approx. 220cm Includes: 10m HEB160 running rails and 10m conductor rail The crane is dismantled and immediately available. Bjdpfx Agoxmuu Tscedk Very good condition, inspection book available. Pillar and wall-mounted slewing cranes are also available, as well as Demag KBK and Abus HB systems, in addition to Errikla, Hadef, Stahl KT 2000, etc. Shipping via carrier possible, please inquire with postal code Collection preferred.

Condition: excellent (used), Year of construction: 1993, machine/vehicle number: MIKA 38106 107 122 113 - 144 145, Technical data: 1 ABUS LS pillar jib crane, rated load 500 kg Bdodpfx Asxvmt Hegcjk Crane available in 6 identical versions!!! Rated load at full outreach: 500 kg / 0.5 t Height: approx. 4.05 m, lower edge of jib: approx. 3.5 m Outreach: approx. 2.5 m, hook height: approx. 3.2 m Total weight: approx. 500 kg Fitted with 500 kg Abus chain hoist with push-button pendant control (2 lifting speeds) Connection: 400V 16A, slewing range 270° Crane is dismantled and packed on pallet Good condition, see pictures Only the crane system visible in the pictures is being sold Shipping via freight forwarder or collection by appointment