Used Kunzmann for sale (66)

Condition: excellent (used), Year of construction: 1990, Make: Kunzmann Type: WF5/3 Year of construction: 1990 X - axis: 500 mm Y - axis: 360 mm Z - axis: 420 mm Clamping surface: 700 x 350 mm tool holder: SK40 spindle bore: 22 mm Fsdpfx Afeffyfrefsga quill stroke: 60 mm Dimensions: approx. W 1.50 x D 2.40 x H 1.90 m Weight: approx. 1.6 t All information without guarantee. The machine is in a very good condition. A demonstration is possible at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 1999, x-travel 400 mm y-travel 320 mm z-travel 400 mm Control HEIDENHAIN TNC 410 spindle turning speed - stepless 0 - 4000 U/min quill stroke 60 mm tool taper SK 40 table surface area 650 x 350 mm total power requirement 6,5 kW Fedsunt Ihjpfx Affsga weight of the machine ca. 1,8 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Cabin, tool holders,...

Condition: used, Year of construction: 2000, Kunzmann machining center BA 600 complete with Heidenhain control. Very good condition, however, there are occasional control issues. Fjdpfexn Av Uex Affega

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,400 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 760 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 10,000 rpm, spindle motor power: 28,000 W, tool weight: 160,000 g, number of axes: 3, This 3-axis KUNZMANN BA1400 was manufactured in 2017. It features a powerful 28 kW motor and a Heidenhain TNC 640 control unit. The machine has a table size of 1400 x 710 mm and can handle a maximum workpiece weight of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KUNZMANN BA1400 vertical machining centre we have for sale. Contact us for further details. • Power: 28 kW • Table dimensions: 1400 x 710 mm • Max. workpiece weight: 1500 kg • Max. tool weight: 160 kg • Tool change time: 3 sec • Chip-to-chip time: 8 sec Technical Specification Taper Size SK 40 Fjdpfeyzn A Asx Affjga

Condition: good (used), Year of construction: 2013, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 60 mm, spindle speed (max.): 4,500 rpm, table length: 800 mm, table width: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table size: 800 x 450 mm Spindle taper: SK40 (ISO 40) Spindle speed: 4,500 rpm (max) Quill stroke: 60 mm Tool clamping: Hydraulic Controller: Heidenhain TNC 320 Country of origin: Germany Motor power: 5.5 kW Machine (L×W×H): approx. 2700 x 1900 x 2300 mm Fgodeypm Npepfx Affea Machine weight: 2.025 kg

Condition: good (used), functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 60 mm, spindle speed (max.): 400 rpm, spindle speed (min.): 1 rpm, spindle mount: MK 4, table length: 700 mm, table width: 425 mm, total height: 2,000 mm, total length: 2,000 mm, total width: 2,000 mm, rotational speed (max.): 4,000 rpm, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table size: 700 x 425 mm Spindle nose: SK 40 Spindle speeds: 1 - 4000 rpm Spindle stroke: 60 mm Featured with: - ISO toolholders - Cooling unit Fgedpfeyac Hlsx Affea - User Manuals Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg

Condition: not inspected (used), Year of construction: 2003, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, CNC milling machine from Kunzmann for industrial machining tasks. Condition: unknown Fodpfx Aeyyvnwsffjga Manufacturer: Kunzmann Maschinenbau GmbH Model: BA1200 Machine No.: 120006 Year of manufacture: 2003 Machine type: CNC machining center Design: vertical Control system: HEIDENHAIN Travel X: 1200 mm Travel Y: 600 mm Travel Z: 600 mm Table size: 1400 x 600 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 35 kVA Rated current: 50 A Main fuse: 63 A

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,400 mm, travel distance Y-axis: 700 mm, CNC milling machine from Kunzmann for demanding machining tasks in industrial applications. Condition: good, in operation. Manufacturer: Kunzmann Maschinenbau GmbH Model: BA1400 Machine No.: 120014 Year of manufacture: 2007 Machine type: CNC machining center Design: vertical Travel X: 1400 mm Travel Y: 700 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 35 kVA Rated current: 50 A Fgodpfxjyyuw Re Affoa Main fuse: 63 A Machine weight: 12000 kg

Condition: good (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, table width: 750 mm, table length: 450 mm, Manufacturer: Kunzmann Maschinenbau GmbH Model: BA600 Machine No.: 600129 Year of manufacture: 2004 Fodpfsyyul Uex Affjga Control: HEIDENHAIN Machine type: CNC machining center Design: vertical X travel: 600 mm Y travel: 400 mm Z travel: 600 mm Table size: 750 x 450 mm Table load capacity: 500 kg Spindle taper: SK40 Spindle speed: up to 9000 rpm Tool changer: 24 stations Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 18 kVA Rated current: 25 A Main fuse: 35 A Machine weight: approx. 3100 kg Coolant system: Knoll Maschinenbau GmbH Type: 400 K-1/150 Year of manufacture: 2001 Serial No.: 133337 Equipment: Tool changer Equipment: Fully enclosed safety housing

Condition: good (used), Horizontal milling device – counterholder for KUNZMAN milling machines series WF. This was an accessory for a KUNZMANN WF 4/3 TNC 124 There are 2 pieces available. The new price at Kunzmann is over € 2,000 + VAT. Fgodpfevr Stuox Affoa With a corresponding adapter plate it should also fit other machines e.g. EMCO, MIKRON; DECKEL; FPS etc. Price net ex warehouse

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, CNC vertical machining center "KUNZMANN BA 1000 SK" Equipped with Heidenhain iTNC 530 path control. Year of manufacture: 2013 Travel ranges: X 1020 mm, Y 620 mm, Z 920 mm Spindle speed range: 1 – 14,000 rpm, stepless With the following accessories: - Fixed angular table, 1200 mm x 610 mm clamping surface - NC attachment rotary table WALTER, diameter 500 mm - B-axis swivel head (torque drive), +30 / -120 degrees - Vertical tool changer with 40 magazine positions (SK 40) - 3D Heidenhain touch probe - Electronic handwheel Fodpfxeyx Ua Ae Affjga - Fixed full enclosure with internal lighting - Coolant through spindle (IKZ system) - Coolant system - Oil mist extraction - Chip conveyor - Operating manual

Year of construction: 2000, condition: used, table clamping surface: 800 x 425 mm 6 T-slots 14-H7, slot width: 63 mm table swivels left/right: 45° Table inclinable from/to the machine: 15/45°. Table top rotation range 360°, resolution: 0,001°. Fgjdpfxob N Acmo Affea max. workpiece weight: 300 kg Dead weight: 340 kg

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 600 015, table mounting size: 750 x 450 mm movements x/y/z: 600/400/600 mm spindle taper: SK 40 ISA min./max. distance table/spindle: 90/690 mm Fedpfxjtuktzs Affjga spindle turning speed range: 50 - 8000 rpm number of tool positions: 24 pieces carriages: 30 m/min electrical connection: 380 V, ca. 15 kVA kW space needed: 2500 x 2500 x 2800 mm weight: 3200 kg

Year of construction: 1990, condition: ready for operation (used), machine/vehicle number: 350119, table mounting size: 350 x 700 mm x-axis: 500 mm y-axis: 320 mm z-axis: 400 mm spindle retainer: SK 40 spindle rotations: 30 - 2500 rpm Fgjdegq Dcljpfx Affoa operating voltage: 380 V total energy requirement: 2,2 kW space needed: 1500 x 1500 x 1800 mm weight: ca. 1700 kg

Condition: good (used), Year of construction: 1980, For sale: 1 piece milling machine Manufacturer: Kunzmann Type: HF6/2V YEAR OF MANUFACTURE: 1980 For speeds see type plate Table: 700 x 170mm Machine can be inspected in our warehouse in 09599 Freiberg. Fgsdpfjq Rfqbex Affoa

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 370648, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, quill stroke: 60 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 4 m/min, mount diameter: 40 mm, table length: 800 mm, table width: 425 mm, total height: 2,000 mm, total length: 2,000 mm, total width: 2,000 mm, overall weight: 1,800 kg, table load: 250 kg, controller manufacturer: HEIDENHAIN, KUNZMANN WF 7/3 Tool Milling Machine - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 25 A - Connection: 13 kVA - T-slots: 6 - T-slot width: 14 H7 - Slot spacing: 63 mm - Max. distance table top to horizontal spindle center: 130 to 550 mm - Table top to bottom edge of vertical head: max. 480 mm - Tool holder: SK 40 - Speed range 1: up to 1125 rpm - Speed range 2: 1126 - 4500 rpm Fedpfjyvqv Isx Affsga - Vertical quill stroke: 60 mm - Vertical head swivels both sides: 90° - Feed longitudinal and cross: 0 - 2000 mm/min - Rapid traverse longitudinal and cross: 5000 mm/min - Vertical feed: 0 - 2000 mm/min - Rapid vertical traverse: 4000 mm/min Note: The item must be collected on a binding date yet to be agreed between 12.05. and 22.05.2026. FCA D-74821 Mosbach – loaded on truck.

Condition: used, Year of construction: 1988, x-travel 600 mm y-travel 400 mm z-travel 400 mm Spindle Speed 4.000 U/min. table surface area 800 x 425 mm tool taper SK 40 Fsdjyv N Hfjpfx Affega feed 2.000 mm/min total power requirement 5 kW machine weight ab. 2.000 kg

Condition: excellent (used), Year of construction: 2009, operating hours: 2,542 h, functionality: fully functional, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned, powered on, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Feeds: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 320 Motor power: 5.5 kW Fgodpfx Asyub H Tjffsa Weight: 1,920 kg Space requirement: approx. 2,000 x 2,000 x 2,100 mm Total connected load: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety enclosure – LED machine lamp

Condition: used, Year of construction: 1977, Technical details: x-travel: 450 mm y-travel: 200 mm z-travel: 400 mm spindle taper ISO: SK 30 distance table/horizontal spindle: max. 400 mm cross rail adjustment - horizontal: 400 (manuell) mm range of revolution per miute: horizontal: 30 - 1275 / 18 step U/min spindle taper: horiz.+vertikal: SK30 distance between table/spindle: vertikal: max. 430 mm quill travel: 60 mm swival range +/-: 90° Grad range of revolution per miute: Vertikalspindel: 50 - 215 / 18 step U/min clamping surface area: 860 x 240 mm table swivable approx.: 45° feed:: 0 - 1.000 / steples mm/min rapid traverse: 2.000 mm/min. total power requirement: 6,0 kW machine weight approx.: 3100 kg dimension machine xH: 1,6 x 1,6 x 1,9 m Coolant device 3-way DRO Heidenhain control panel Optional accessories * Fodpfxjvc Awfe Affega

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, controller manufacturer: HEIDENHAIN, controller model: TNC 124, number of axes: 3, This 3-axis KUNZMANN WF 4/3 was manufactured in 2001. It features a vertical spindle with a swiveling head, CNC-controlled X, Y, and Z axes, and a spindle taper of SK40. The spindle speed ranges from 0 to 4,000 rpm with rapid traverse rates up to 1,000 mm/min on all axes. Consider the opportunity to buy this KUNZMANN WF 4/3 universal machining centre. Contact us for more information about this machine. • Swivel head: ±90° • Spindle & drives (INDRAMAT): • Main spindle motor: 2AD104C-B050A1-CS06-A2N1 • Spindle taper: SK40 • Spindle bore: 22 mm • Quill diameter: 90 mm • Quill stroke: 60 mm • Axis drives: • X / Y / Z motor type: MKD071B-061-GG1-KN • Speed & feed: • Spindle speeds: • Range I: 0–1,000 rpm (stepped) • Range II: 1,001–4,000 rpm (stepless) • Rapid traverse: • X-axis: up to 1,000 mm/min • Y-axis: up to 1,000 mm/min • Z-axis: up to 1,000 mm/min • Feed force (X/Y/Z): approx. 4 kN • Electrical & control (INDRAMAT): • Power supply modules: • Net filter: NFD03.1-480-030 • Capacitor module: CZM01.3-02-07 • Controllers: • Spindle controller: DKC11.3-100-7-FW • Axis controller: DKC01.3-040-7-FW • Firmware versions: • Spindle: ESM 2.1-SMT-02V • Axes: ESM 2.1-SMT-02V Technical Specification Fedpfeya D Svex Affega Taper Size SK 40

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, table load: 500 kg, rotational speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 600 mm Spindle speed: 9,000 rpm Spindle taper: ISO 40 Spindle drive: 7.5 kW Table size: 750 mm x 450 mm Spindle/table distance: 690 mm Table load: 500 kg MACHINE DETAILS Control: Heidenhain type 410 M mm Fjdpfoyv A E Ijx Affjga Machine weight: approx. 3.2 t EQUIPMENT Electric handwheel

Condition: good (used), Year of construction: 2001, Heidenhain TNC 310 cnc control electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Fgjdjit Tr Tjpfx Affsa Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-5000 UpM Vorschub / feed 0-2000 mm/min. Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW Gewicht ca. / weight ca. 2000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2017, CNC Machining Center Kunzmann WF 650 Control: Heidenhain iTNC 640 Year of manufacture: 2017 Travel distances: X-axis: 650 mm Y-axis: 500 mm Z-axis: 450 mm Manual swiveling of milling head: -5° / +95° Rotary table: Ø 400 mm Centering bore: Ø102 H7 A-axis (swivel): +/- 30 s C-axis rotary table: +/- 10 s Swivel range A-axis: -120/-95° Rotation range C-axis: 360° rotation Spindle interface: SK 40 DIN69871 Tool magazine: 60 slots Spindle speed: 1 – 12,000 rpm Accessories: Coolant system ICS with high-pressure pump Electronic handwheel Fodpfx Asyli Ereffsga Chip conveyor 3D measuring probe

Condition: good (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, A Kunzmann milling machine of the type WF 4/3 is for sale The machine is fully functional and ready for immediate use Technical data Control: Heidenhain TNC 124 Year of manufacture: 1996 Working range longitudinal X - axis: 400 mm transverse Y - axis: 350 mm vertical Z - axis: 400 mm Angled table, rigid Clamping surface: 650 x 350 mm Max. load: 250 kg Main drive AC motor: 5.5 kW Feed drives AC - single drives Feed infinitely variable 0 - 2 000 mm/min Tool holder: SK 40 Speed range: 1-4000 1/min Quill, vertical: stroke 60 mm Swivel range vertical milling head: ± 90° Tool clamping: hydraulic Linear stroke measuring systems, direct, distance-coded Resolution 0.001 mm Position deviation Pmax according to VDI/DGQ 3441 0.015 mm 0.015 mm Operating voltage 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg On request, transportation and loading can be arranged at extra cost. organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Fgjdpfxovftrxs Affsa Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Year of manufacture 2007 Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Fgedswhm S Nspfx Affja Quill stroke 60 mm Vertical head swivels +/- 90 Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 control system - Operating instructions - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping - Fixed table - Electronic handheld control panel - Coolant system - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.