Used Kunzmann for sale (73)

Condition: excellent (used), Year of construction: 1999, x-travel 400 mm y-travel 320 mm z-travel 400 mm Control HEIDENHAIN TNC 410 spindle turning speed - stepless 0 - 4000 U/min quill stroke 60 mm tool taper SK 40 table surface area 650 x 350 mm total power requirement 6,5 kW weight of the machine ca. 1,8 t Gbedpfx Aeunt Ihol Usu dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Cabin, tool holders,...

Condition: used, Year of construction: 1995, - Heidenhain position display - Infinitely variable feed in all axes - rapid traverse in all axes - Hydraulic tightening system - Rigid angular table - electric central lubrication - coolant system - workplace lighting - machine feet - year of construction 1995 Specifications Milling table: - Clamping surface: 650 x 350 mm - Clamping grooves: 5 - Slot width: 14 H7 - Groove spacing: 63 mm Gbjdpfx Alsvhfqre Uou - Max. load: 250 kg Working range: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. Max. distances: - Top edge of table to horizontal spindle center: 140 - 540 mm - Max. table top edge to vertical head bottom edge: 430 mm Milling spindle: - Tool holder: SK40 - Vertical/horizontal speeds: 40 - 2550 rpm - Gear stages: 2 - Vertical quill stroke: 60 mm - Vertical head can be swiveled on both sides: 90 ° Feed rates: - Feed lengthwise & crosswise: 0 - 1000 mm/min - Rapid traverse lengthwise & crosswise: 4000 mm/min - Vertical feed: 0 - 1000 mm/min - Rapid traverse vertical: 3000 mm/min General data: - Drive power: 3 kW / 1410 rpm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Condition: new, Year of construction: 2024, Universal milling and drilling machine Kunzmann WF 610 M with Heidenhain TNC 128 control system Paths X/Y/Z = 610/400/450 mm Speed 1-4500 rpm Power 8.5 kW at 100 % ED Spindle SK40 DIN 69871 (form AD) with tightening bolt DIN 69872 Fixed angle table 800x 425 mm 6 x 14 H7 T-slots coolant device 66 liters electric handwheel HEIDENHAIN HR 510 FS Further technical data is available on request. The machine is located at our premises in 71334 Waiblingen-Beinstein, is immediately available and can also be inspected. Please register in advance. Gsdpfx Aljuf Sv Ds Uobu

Condition: used, Univ. NC Tool Milling Machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of Manufacture 1998 Travel X: 400 mm Y: 320 mm Z: 400 mm Table Size 650 x 350 mm Spindle Taper SK 40 Spindle Speed 40 - 2500 rpm Feeds X, Y and Z axes 0 - 1000 mm/min, stepless Rapid Traverse X, Y axis 4000 mm/min Rapid Traverse Z axis 3000 mm/min Pinol Adjustment Vertical 60 mm Drive Power Spindle Motor 3 kW Gjdpfx Aelvyrbsl Usbu Mains Connection 400 Volt, 50 Hz - NC path control Heidenhain TNC 124 - Stepless spindle speed control via belt drive with electric variable speed adjustment, spindle speed programmable - Reduction gearbox with 2 gear stages for two speed ranges - Main motor with belt drive via variable gearbox and stepless control via electronic system - Vertical milling head swiveling +/- 90° - Hydraulic tool clamping - Fixed angle table - All 3 axes with ball screw and mechanical handwheels - Control cabinet fixed to the machine - Coolant tank with pump located beside the machine - Central lubrication - Lighting Space Requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg Good condition

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, table load: 500 kg, rotational speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 600 mm Spindle speed: 9,000 rpm Spindle taper: ISO 40 Spindle drive: 7.5 kW Table size: 750 mm x 450 mm Spindle/table distance: 690 mm Table load: 500 kg MACHINE DETAILS Control: Heidenhain type 410 M mm Machine weight: approx. 3.2 t EQUIPMENT Electric handwheel Gbjdpfeyv A E Isx Al Uju

Condition: used, Year of construction: 1989, x-travel 500 mm y-travel 360 mm z-travel 420 mm control Heidenhain 355 tool taper SK 40 weight of the machine ca. 1,7 t +++++ Please note: Gjdpfx Aleh Hrvfe Usbu The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 1992, machine/vehicle number: 19636, Offer 24103 Technical data: - Working range of the axes Gjdpfxjtwmcls Al Ujbu - X / Y / Z 450 / 400 / 420 mm - Table size 850 x 250 mm - Max. distance spindle - table 400 mm - Working spindle speeds Horizontal 30 - 1275 rpm - Work spindle speeds Vertical 66 - 2840 rpm - Feed rates X - Y and Z - axis - Rapid traverse - Drive 400 V / 3.2 kW - Space requirement approx. W 1400 x H 1800 x D 1400 mm - Weight approx. 1400 kg

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 410M, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF9 CNC was manufactured in 1999. It features a reliable Heidenhain TNC 410M control system, ensuring precision and efficiency in operations. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF9 CNC vertical machining centre we have for sale. Contact us for further details. Gbsdezbu Nzepfx Al Usu • Condition: Good / Fully operational • Control System: Heidenhain TNC 410M

Condition: used, Year of construction: 1972, Milling machine used Godpoudb N Dsfx Al Ujbu Make:Kunzmann Model: UF6N year of construction: 1972 Technical data: Table longitudinal travel automatic: 440 mm Table longitudinal travel by hand: 450 mm Transverse table travel 200 mm Table vertical travel horizontal/ vertical 465/500 mm Table size 860x240 mm Table swivels 45° on both sides Distance table/spindle 430 mm Spindle holder ISA 30 Quill stroke 60 mm Tiltability of the spindle head +/- 90 18 spindle speeds horizontal 32-1342 rpm 18 spindle speeds vertical 72-2888 rpm 6 automatic feeds lengthwise 13.12-164 mm/min 6 automatic cross feeds 26.24-328 mm/min. Spindle drive 1.8/2.6 kW with inclinable vertical milling head/clamping vice/ Counter holder/collet chuck with collets Weight approx. 850 kg Dimensions approx. 1400x1900x1800 mm

Condition: reconditioned (used), Year of construction: 2008, Universal tool milling machine Manufacturer: KUNZMANN Model: WF 4/3 Year of manufacture: 2008 - partially overhauled, newly painted, RAL 7035 light gray / RAL 3027 raspberry red Machine no.: 344349 Warranty: 6 months Geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 linear control system - HEIDENHAIN HR 410 electronic handwheel - Fixed table 650 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system DIN 69872 Gedpfjhikrrox Al Usbu - Central lubrication, electric - Coolant system - Chip tray - Operating manual - used, as is -

Condition: good (used), Year of construction: 1986, 3 units in stock Universal milling machine Manufacturer: KUNZMANN, Type: UF 6 / 3, Year of manufacture: 1986, with Heidenhain digital display Gbsdpfsich Dvjx Al Usu Spindle mount: ISO 40, horizontal and vertical Spindle speeds: 50 - 2150 rpm Feed rates, stepless: 0-1000 mm/min, stepped X / Y and Z 0-250 mm/min Rapid traverse: 2000 mm/min X / Y and Z 500 mm/min Table surface: 860 mm x 265 mm, swivel range: +45 to -45 degrees Machine documentation available. Good condition, ready for demonstration. Price per unit: €4,850 net, ex works, free on board (FOB) at warehouse.

Condition: excellent (used), Year of construction: 1983, x-travel 450 mm y-travel 200 mm Gbsdpfx Aloxdnpls Usu z-travel 465 mm total power requirement 2,6 kW weight of the machine ca. 1.2 t

Condition: used, Year of construction: 1990, Motor output 5 kW Weight 1.500 kg Godswgnz Njpfx Al Uobu Control cnc

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 370483, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, controller model: HEIDENHAIN TNC 124, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Gjdjyhnmtepfx Al Usbu Table length: 800 mm Table width: 425 mm Max. workpiece weight on table: 250 kg Distance between vertical spindle and table: 560 mm Spindle taper: SK 40 Max. spindle speed: 5,000 rpm Swiveling range vertical milling head: ± 90° Feed rates: up to 2,000 mm/min Rapid traverse X-axis: 10 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse Z-axis: 8 m/min Vertical quill stroke: 60 mm MACHINE DETAILS Control: HEIDENHAIN TNC 124 Connection: 50 Hz 3x 400 Volt Milling spindle motor: 5.5 / 7 kW Total power consumption: 15 kVA Dimensions & Weight Machine weight: approx. 1,800 kg Dimensions (L x W x H): 2,100 x 1,800 x 2,050 mm EQUIPMENT Rigid angle table Electronic handwheel Heidenhain probe Vertical milling head Full splash guard cabin Coolant system Machine lamp

Condition: used, Year of construction: 1977, Technical details: x-travel: 450 mm y-travel: 200 mm z-travel: 400 mm spindle taper ISO: SK 30 distance table/horizontal spindle: max. 400 mm cross rail adjustment - horizontal: 400 (manuell) mm range of revolution per miute: horizontal: 30 - 1275 / 18 step U/min spindle taper: horiz.+vertikal: SK30 distance between table/spindle: vertikal: max. 430 mm Gjdpfsvc Awfox Al Uebu quill travel: 60 mm swival range +/-: 90° Grad range of revolution per miute: Vertikalspindel: 50 - 215 / 18 step U/min clamping surface area: 860 x 240 mm table swivable approx.: 45° feed:: 0 - 1.000 / steples mm/min rapid traverse: 2.000 mm/min. total power requirement: 6,0 kW machine weight approx.: 3100 kg dimension machine xH: 1,6 x 1,6 x 1,9 m Coolant device 3-way DRO Heidenhain control panel Optional accessories *

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine, model UF 6 NR Year of manufacture 1982, 2 gear stages, 1400/2800 rpm, Table size 860x240mm, 3 T-slots 14mm, spindle mount SK30, Gbedpfsiqkc Iox Al Uou Travel ranges: X/Y/Z = 450/200/430mm, horizontal speeds: 18 stages from 32-1342 rpm, vertical: 18 stages from 72-2988 rpm, 12 feeds in the X-axis, separate coolant tank, chip guard, machine lamp, 3 horizontal milling arbors each with a milling cutter, 2 overarm milling arbor bearing blocks, 1 collet chuck with wrench. 1 machine vise with crank.

Condition: used, z-travel:380 mm y-travel:400 mm x-travel:500 mm tool taper:SK 40 vertical head swivelling:beidseitig 90 Grad table-size:LxB 700x425 mm Gbedpfx Alecxxmqo Uou dimensions of the machine ca.:2x2x2 m quill stroke:60 mm groove width:14H7 mm flute distance:63 mm weight of the machine ca.:2 t total power requirement:10 kW Speed range of live tooling:5 - 3000 min -1 Loading:max. 250 kg clamping slots:6 power capacity - milling spindle:5,5 kW

Condition: excellent (used), Year of construction: 1990, Manufacturer: Kunzmann Gbodpsffyfrjfx Al Ueu Type: WF5/3 Year of manufacture: 1990 X-axis: 500 mm Y-axis: 360 mm Z-axis: 420 mm Clamping area: 700 x 350 mm Tool holder: SK40 Spindle bore: 22 mm Quill travel: 60 mm Dimensions: approx. W 1.50 x D 2.40 x H 1.90 m Weight: approx. 1.6 t All information is provided without guarantee. The machine is in very good condition. A demonstration can be arranged at any time in our showroom.

Year of construction: 1990, condition: ready for operation (used), machine/vehicle number: 350119, table mounting size: 350 x 700 mm x-axis: 500 mm y-axis: 320 mm z-axis: 400 mm spindle retainer: SK 40 spindle rotations: 30 - 2500 rpm operating voltage: 380 V total energy requirement: 2,2 kW Gedpfx Alegq Dcle Ujbu space needed: 1500 x 1500 x 1800 mm weight: ca. 1700 kg

Condition: good (used), Horizontal milling device – counterholder Gbjdpjvr Stusfx Al Usu for KUNZMAN milling machines series WF. This was an accessory for a KUNZMANN WF 4/3 TNC 124 There are 2 pieces available. The new price at Kunzmann is over € 2,000 + VAT. With a corresponding adapter plate it should also fit other machines e.g. EMCO, MIKRON; DECKEL; FPS etc. Price net ex warehouse

Condition: good (used), Cross support, cross support, cross table, cross-sliding table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 Gjdpfxsg Dg Rpo Al Uebu -Dimensions: 530/420/H730 mm -Weight: 80 kg

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 600 015, table mounting size: 750 x 450 mm movements x/y/z: 600/400/600 mm spindle taper: SK 40 ISA min./max. distance table/spindle: 90/690 mm spindle turning speed range: 50 - 8000 rpm number of tool positions: 24 pieces carriages: 30 m/min electrical connection: 380 V, ca. 15 kVA kW space needed: 2500 x 2500 x 2800 mm Gjdpfxotuktzo Al Usbu weight: 3200 kg

Condition: used, Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm Gsdpfx Asd Tx E Njl Usbu -Weight: 28 kg