Used Kunzmann for sale (66)

Condition: used, Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos Kwodpfsd Tx E Nex Ab Teu -Dimensions: 730/160/H110 mm -Weight: 28 kg

Condition: used, Year of construction: 1996, x-travel 400 mm y-travel 350 mm z-travel 400 mm Kwsdpow U U Sijfx Ab Teu tool taper SK 40 spindle turning speed range 1,0 - 4.000 U/min feeds 0 - 2000 mm/min quill stroke 60,0 mm table-size 650 x 350 mm T-slots 14 H7 Control TNC 124 engine output 5,5 kW weight 1800 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel

Condition: good (used), Year of construction: 2017, Kunzmann BA1400 Year of manufacture: 2017 Power: 28 kW Control system: Heidenhain TNC 640 Table dimensions: 1400 x 710 mm Max. workpiece weight: 1500 kg Spindle taper: SK40 Max. tool weight: 160 kg Tool change time: 3 sec Chip-to-chip time: 8 sec X-axis: 1400 mm Y-axis: 700 mm Z-axis: 760 mm 3D touch probe High-pressure coolant through spindle (IKZ) Kwsdsydxk Iopfx Ab Tju Internal chip auger Machine from single-shift operation

Condition: good (used), Year of construction: 2008, New spindle in 2025 Kunzmann WF 650 Year of manufacture: 2008 Power: 16 kW Control: Heidenhain iTNC 530 Kwedpeydv E Aefx Ab Tju Table dimensions: 1000 x 600 mm Max. workpiece weight: 400 kg Spindle taper: SK40 Max. tool weight: 7 kg Tool stations: 20 X: 650 mm Y: 500 mm Z: 450 mm Number of T-slots: 9 pcs T-slot spacing: 63 mm Speed range: 5–6500 rpm Torque: 290 Nm 3D touch probe High-pressure through-spindle coolant (IKZ) Internal chip conveyor Machine from single-shift operation

Condition: excellent (used), Year of construction: 2004, CNC MACHINING CENTER Kunzmann BA 1200 Year of manufacture 2004 Heidenhain TNC 530 Technical specifications: X-1200 Y-700 Kwjdpfx Aewm Dkyeb Tsu Z-750 Spindle max. 8000 rpm

Condition: good (used), Horizontal milling device – counterholder for KUNZMAN milling machines series WF. This was an accessory for a KUNZMANN WF 4/3 TNC 124 There are 2 pieces available. The new price at Kunzmann is over € 2,000 + VAT. Kwsdpfx Aevr Stueb Teu With a corresponding adapter plate it should also fit other machines e.g. EMCO, MIKRON; DECKEL; FPS etc. Price net ex warehouse

Condition: excellent (used), Year of construction: 2022, Kunzmann WF 410 M Milling Machine (2022) Manufacturer: Kunzmann Model: WF 410 M Milling Machine Year of manufacture: 2022 Condition: used, very good, as new Operating hours: 2355h Spindle hours: 253h X-travel: 410 mm Y-travel: 350 mm Z-travel: 450 mm Kwjdpfjx Ni U Nex Ab Tou Main drive (100%/25% duty cycle): 6.8/13.0 kW Speed range: 1-4500 rpm Tool holder: SK 40 DIN ISO 7388-1 Feed rate: up to 5 m/min Weight: approx. 2,000 kg Fixed angle table Clamping surface: 800 x 425 mm T-slots: 6 x 14 H 7 Table load max.: 300 kg Coolant system Machine lamp Horizontal milling spindle with gearbox Scope of delivery: – Electronic handwheel HR 510 – Original documentation Without vise.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Kunzmann WF 410 MC Universal Milling Machine (2021) Manufacturer: Kunzmann Model: WF 410 MC Milling Machine Year of manufacture: 2021 Condition: Very good, as new, little used Control: HEIDENHAIN TNC 620 Travel (X/Y/Z): 410 / 350 / 450 mm Main drive (100%/25% duty cycle): 6.8 / 13.0 kW Speed range: 1–5,000 rpm Tool holder: SK 40 DIN ISO 7388-1 Feed rate: up to 5 m/min Weight: approx. 2,000 kg Angle table, fixed Clamping area: 800 x 425 mm T-slots: 6 x 14 H 7 Maximum table load: 300 kg Coolant system Machine lamp Horizontal milling spindle with gearbox Scope of delivery: – Electronic handwheel HR 510 Kwjdpfx Asx Ivypob Tou – Original documentation – Including tool measuring device – Including 20 tool holders

Condition: good (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, A Kunzmann milling machine of the type WF 4/3 is for sale The machine is fully functional and ready for immediate use Technical data Control: Heidenhain TNC 124 Year of manufacture: 1996 Working range longitudinal X - axis: 400 mm transverse Y - axis: 350 mm vertical Z - axis: 400 mm Angled table, rigid Clamping surface: 650 x 350 mm Max. load: 250 kg Main drive AC motor: 5.5 kW Feed drives AC - single drives Feed infinitely variable 0 - 2 000 mm/min Tool holder: SK 40 Speed range: 1-4000 1/min Quill, vertical: stroke 60 mm Swivel range vertical milling head: ± 90° Tool clamping: hydraulic Linear stroke measuring systems, direct, distance-coded Resolution 0.001 mm Position deviation Pmax according to VDI/DGQ 3441 0.015 mm 0.015 mm Operating voltage 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg Kwedpjvftrxsfx Ab Tou On request, transportation and loading can be arranged at extra cost. organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2003 Machine No. 344174 >> Fixed angular table >> Infinitely variable spindle speed up to 4000 rpm >> Infinitely variable feed in 3 axes from 0 to 2000 mm/min Kedpfjx Elxpex Ab Tewu >> Travel distances X/Y/Z: 400/320/400 mm >> Table area: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirements approx.: 2.3 x 2 x 2 m >> Drive power: 12 KVA Accessories and Equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel Heidenhain About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from a facility where it was only sparingly used for training purposes. The control system is very easy to operate. The machine also features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is very straightforward by simply swiveling the vertical head aside. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected in our workshop. You are welcome to view and test the Kunzmann under power at our facility. The machine is available immediately.

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, total height: 2,000 mm, total width: 2,000 mm, total length: 2,000 mm, table width: 425 mm, table length: 800 mm, overall weight: 2,000 kg, workpiece weight (max.): 250 kg, Travel X/Y/Z 600/400/400 mm, spindle speed 1 - 4500 rpm, motor 7,5 KW, spindle ISO 40, control Heidenhain TNC 124 or manual, table size 800x425 mm, hydraulic tool clamping, tilting head, coolant device, electric handwheel, tool holders, manual Kjdjw Ay N Dspfx Ab Tewu

Condition: reconditioned (used), Year of construction: 2002, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 344025 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D touch probe system for recording the workpiece position for determining workpiece reference points for measuring a finished part incl. Weldon chuck SK40/Ø 16 mm - universal table 650 x 395 mm (T-slot: 14 mm) can be swiveled around 3 axes can be rotated 360° (as 4th axis digital displayed in the control) pivotable +/- 30° tilting range towards the machine 45° tilting range away from the machine 15° centering hole Ø 32 mm table load 150 kg - vertical milling head SK 40 with hydraulic tightening system DIN 69872 - central lubrication, electric - coolant system Kwedpfx Aom Nbwtsb Tsu - splash guard cabin, travelling, electrically secured - operating instructions used as seen The machine is technically corresponding to the state of the year it was built.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 850 kg, table width: 1,020 mm, table length: 610 mm, table load: 850 kg, overall weight: 8,400 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,200 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This extremely robust Kunzmann BA 1000 is in excellent condition and can be seen in operation in our showroom. It is a relatively compact machine, yet with a large working area (X:1020 mm - Y:620 mm), a table size of 1200x610mm, and a weight of 8,400kg. The machine is equipped with: chip conveyor, electronic handwheel, rinsing gun, Losma mist extraction system, Step-Tec spindle, Heidenhain TT 140 height gauge, 3 modular machine vices, 32 high-quality tool holders including cutting tools, and the original documentation. Kedoxwk Nnepfx Ab Towu

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Kunzmann WF 600 M milling machine (2012) Manufacturer: Kunzmann Type: WF 600 M Year of manufacture: 2012 Condition: used, very good Control: Heidenhain TNC 124 X-axis 600 mm Kwjdpfjxwl Ulsx Ab Tju Y-axis 400 mm Z-axis 400 mm Table length 650 mm Table width 350 mm Spindle speed 4500 rpm Vertical spindle and horizontal spindle - SK40 Hydraulic tightening system Main drive motor: 5.5 kW Dimensions approx.: 2 x 2 x 2 m Weight approx. 2000 kg Coolant system Scope of delivery: - Documentation - Machine light - Machine feet - Machine vice

Condition: good (used), Year of construction: 2001, functionality: fully functional, Kunzmann WF 7 CNC milling machine TNC 410 control Manufacturer: Kunzmann Type: WF 7 Year of manufacture: 2001 Kjdpfx Aboxwl Ufo Tswu Condition: used, under power Control: Heidenhain TNC 410 X-path 610 Y-path 400 Z-path 400 SK 40 housing Speed 1-5000rpm Tilt/swivel table Scope of delivery: - Underlays - Various tool holders

Condition: excellent (used), Year of construction: 2009, operating hours: 12,959 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, total height: 2,450 mm, total width: 2,400 mm, total length: 3,100 mm, table width: 630 mm, table length: 630 mm, table load: 350 kg, overall weight: 6,800 kg, Kunzmann WF 650 5-Axis Simultaneous Machining Center (2009) Manufacturer: Kunzmann Type: WF 650 5-Axis Simultaneous Machining Center Year of manufacture: 2007 Commissioned: 2009 Condition: Used, very good Machine ON: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software Package 1 for iTNC 530 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Vertical milling head tilting range: -5° + 95° NC built-in rotary table Ø 630 mm Table load: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 spindles Tools Internal coolant supply: Tool clamp with coolant supply and blow-out device through the spindle. Flow rate 25 l/min at 40 bar Optional water/air through the spindle Paper belt filter Controlled CNC milling head (B-axis) Mounting kit for TS 640 probe head Kwedpfxoxwl T Us Ab Tju 3D probe with infrared transmission Dimensions LxWxH approx.: 3.1 x 2.4 x 2.45 m Weight approx. 6,800 kg Coolant system LxWxH approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine feet – Machine light

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Tool milling machine Kunzmann WF4/3 Heidenhain digital display year of manufacture 1994 very good CONDITION!! Technical data: >> Year of manufacture 1994 >> Rigid angle table >> Speed from 40 to 2550 rpm Biojv7Igbpa >> Continuous feed in X Y Z axis from 0 to 2000 mm/min >> Travels X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis Heidenhain digital display >> Electric central lubrication Kodpfx Aevyr R Nob Tewu >> Machine feet >> Handwheels >> Coolant system About the machine: Offered is a Kunzmann WF4/3 tool milling machine in very good condition. It comes from a state-owned company where it was only used a little. Converting from vertical to horizontal is very easy, by folding away the vertical head. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-Compliant, from Training Workshop! Technical Specifications: • Year of manufacture: 2010, Machine No. 347283 • Fixed angular table • Infinitely variable spindle speed up to 4,500 rpm • Infinitely variable feed in 3 axes from 0 to 2,000 mm/min • Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min • Travel X/Y/Z: 400/350/400 mm • Table size: 650 x 350 mm • Table load capacity: 250 kg • Vertical quill stroke: 60 mm • Vertical and horizontal quill – SK40 taper • Hydraulic clamping system • Weight approx. 1,800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Accessories and Equipment: • Heidenhain TNC 320 CNC control • Hydraulic clamping, vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manuals and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 Kwjdexuppuspfx Ab Tou About the Machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition and has seen very few operating hours. It comes from a facility where it was used exclusively for training purposes. The control is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal operation is very straightforward by swinging away the vertical head. The ways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the Kunzmann on-site under power. There are 7 units of Kunzmann WF4/3 with the TNC 320 Heidenhain milling machines available. The machines are available immediately.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Path Control – Excellent Condition, CE-Compliant, from Training Workshop! Technical Data: - Year of manufacture: 2010 Machine No. 347284 - Fixed angular table - Spindle speed: Infinitely variable up to 4500 rpm - Feed rate: Infinitely variable in 3 axes from 0 to 2000 mm/min - Rapid traverse X and Y axes: 5000 mm/min - Rapid traverse Z axis: 4000 mm/min - Travel distances X/Y/Z: 400/350/400 mm - Table surface: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight approx. 1800 kg - Overall dimensions approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Accessories and Equipment: - Heidenhain TNC 320 path control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control operating manual, and programming examples - Handwheels - Coolant system Kwsdpfexupdlox Ab Teu - Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 path control. This universal milling machine is in excellent condition and has very low operating hours. It comes from a facility where it was used exclusively for training purposes. The control system is very user-friendly. Additionally, the machine offers hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very straightforward thanks to the folding vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann under power on site. Seven units of the Kunzmann WF4/3 with TNC 320 Heidenhain milling machines are available. The machines are ready for immediate delivery.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Contouring Control – Excellent Condition, CE-compliant, from a Training Workshop!! Technical Data: >> Year of manufacture: 2010, Machine No. 347247 >> Fixed angle table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed on 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load capacity: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic tool clamping system >> Weight: approx. 1,800 kg >> Space requirement: approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Features: Kodjxupc Uepfx Ab Towu >> Heidenhain TNC 320 contouring control >> Hydraulic clamping for vertical and horizontal axes >> Automatic central lubrication system >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition, with very few operating hours. Previously used exclusively for training purposes, it features a highly user-friendly control system. The machine offers hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal milling is extremely easy via the tilting vertical head. Guideways are continuously lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the Kunzmann machine under power at our facility. A total of 7 Kunzmann WF4/3 milling machines with TNC 320 Heidenhain controls are available. The machines are immediately available.

Condition: used, Univ. NC tool milling machine KUNZMANN type WF 3/4 Machine. No. 341020 Year of construction 1998 Travel X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle holder SK 40 Spindle speed 40 - 2500 rpm. Feed rates X, Y and Z-axis 0 - 1000 mm/min. infinitely variable Rapid traverse X, Y-axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Vertical pinol adjustment 60 mm Drive power spindle motor 3 KW Mains connection 400 Volt, 50 Hz - CNC line control Heidenhain TNC 124 - Spindle speed via 2 gear stages and infinitely variable via electronically controlled variator gearbox - Vertical milling head can be tilted +/- 90 - Hydraulic tool clamping - Fixed angled table - Control cabinet fixed to the machine - Coolant tank with pump adjacent - central lubrication Kwodjlvyrbspfx Ab Teu - central lighting Space requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg Good condition

Condition: used, Year of construction: 2000, Kunzmann machining center BA 600 complete with Heidenhain control. Very good condition, however, there are occasional control issues. Kwodoxn Av Uspfx Ab Tsu

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,238 h, functionality: fully functional, machine/vehicle number: 120007, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain TNC530, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Ksdpsxnwxqsfx Ab Tjwu Travel X: 1,200 mm Travel Y: 700 mm Travel Z: 750 mm Maximum spindle speed: 8,000 rpm MACHINE DETAILS Control: Heidenhain TNC530 Electrical data Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 35 kVA Rated current: 50 A Main fuse: 6.3 A Operating hours Spindle hours: 5,238 h Control on-time: 17,705 h

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Year of production: 2005 Manufacturer: GUK-Falzmaschinen Griesser & Kunzmann GmbH & Co. KG Machine availability – on request; Machine in use; possibility to carry out work tests during inspections; Good technical condition; Folding machine manufactured by the renowned German company GUK equipped with a high pile feeder (sheet picking with a suction roller from above) FL2-50, 2 folding pockets aggregates, pocket with maximum working widths of 50 cm and mobile chute delivery. Folding machine GUK model FA 50/6-6 FL2-50 – infeed width 500 mm (6+6 folding pockets). Maximum input format: 500 x 850 mm Minimum input format: 105 x 145 mm Minimum folding length: 45 mm Feed rate of sheets from feeder: 40 - 180 m/min Kodpfx Aberx S Iwo Tjwu Maximum performance: 27.000/from sheet A4 Power supply: 400 V/50 Hz Machine equipment: High pile feeder FL2-50; Batch counter. Multifunction counter programming the operation of the machine. Ability to fold sheets in groups (lots) of the given number in each lot, with stepless adjustment of the spacing between parties. I. folding unit FA 50/6, 6 folding pockets; Sound reduction hood, top. II. folding unit FA 50/6, 6 folding pockets Sound reduction hood, top. Mobile chute delivery S 520. To be added after I or II folding station.

Condition: excellent (used), Year of construction: 2002, Used CNC tool milling machine Year of manufacture: 2002 Control manufacturer: Heidenhain Control type: TNC 426 Working area: X: 400 mm Y: 350 mm Z: 400 mm Clamping surface: 650 x 350 mm (fixed table) Milling spindle tool holder: SK40 Spindle speed range: 5 – 5000 rpm Feed rate: 0–2 m/min Tool changer: none Kodpfjxz Rkyex Ab Tewu Accessories: Standard, chip tray, handwheel & documentation including declaration of conformity and data backup