Used Hakomatic B 45 for sale (28,717)

Condition: new, width of the strips 45.0 mm Hnolhcdexaanrew Djw band length 850 mm band speed 8.0 m/sek. voltage 230 V total power requirement 0.18 kW MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm Hnjlhcdofnvwqsw Djw - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: good (used), Year of construction: 2013, 198 USED floor cleaning machine, floor scrubber, floor scrubber. TECHNICAL DATA: - Power: 1.13 kW EXTERNAL DIMENSIONS (in cm): - Width: 51 cm. Hnoljxrb Udjhcdw Dow The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, machine/vehicle number: 948587884, Working width of the brush head: 65 cm Number of disc brushes: 2 Suction width of the squeegee: 95 cm Driving speed forward/backward up to max.: 5,5/2,5 km/h Turning circle-Ø outside: 1,9 m Unladen weight: 254 kg Total weight incl. 74 l cleaning solution: 378 kg Space requirement: Length with brush head and suction: 146 cm Width without/with suction: 68/95 cm Hnelhcdwsc Uvfve Dew Height: 103 cm Tank capacity for fresh water approx.: 72 l Tank capacity for waste water approx.: 78 l

Condition: used, Year of construction: 1973, grinding diameter max. 30 mm regulating wheel width 12 mm Hslhst Hwwwocdw Donw max. width of grinding wheel mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: good (used), functionality: fully functional, Hako B43 S combination floor cleaning machine with accessories: Manufacturer : HAKO Werke GmbH Germany S/N 740671353081 Functional Suction pump, washing brush or squeegee Battery charger 24 V Charging voltage 800 W 90 kg CE marked Hnelhcdwsty Su Eo Dew

Condition: used, operating hours: 172 h, overall weight: 1,500 kg, fuel type: electric, HAKO Automatic Cleaner and Scrubber-Dryer Name: HAKOMATIC B 1050 Drive: ELECTRIC Condition: see photos / TOP condition Item No.: B 1050 Manufacturer: HAKO Year of manufacture: see photos - visually TOP Operating hour meter reads "172" 4 brushes Electric-operated Battery, full power 36 V DC / 5.5 KW Weight: 1500 kg Holhowfflvscdw Denw New price: approx. €39,900 Price quoted for pickup from the warehouse in 47441 Moers Various cleaners and scrubber-dryers in stock We offer them as shown. Inspection is expressly offered. General: We offer various items here, which we describe as best as possible and provide informative photos. No further information about the item can be provided. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. We offer viewings by telephone on Tuesdays and Thursdays between 9 a.m. and 4 p.m. The item can be picked up immediately if necessary. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €350 net, depending on distance.) All dimensions are approximate.

Condition: used, Year of construction: 2006, operating hours: 704 h, Hako Hakomatic B1100 scrubber-dryer, built in 2006, operating hours: only 704 hours, previous owner: German Armed Forces, includes charger, battery built in 2006, in good condition, ready for immediate use. Hnjlhcdewapd Eow Djw We can provide you with a leasing or financing offer upon request. Mr. Mihm (Tel. +49 1 800 800) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted!

Condition: good (used), Year of construction: 2005, functionality: fully functional, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 100 mm, workpiece spindle speed (max.): 90,000 rpm, controller model: Bosch Rexroth MTX, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Area of application: Hard machining Control: Bosch Rexroth MTX Working area Axes: 6 axes X1,Z1, X2 & Z2: Hydrostatic axes B1: Workpiece spindle P01: Internal loader Dimensions working area: 200 x 200 x 100 mm Spindle & tools Number of work spindles: 1 (1x internal grinding, 1x external grinding) Number of tools: 2 Tool holder: External wheel max. Ø500 mm, internal wheel for high frequency spindle Speeds Workpiece: max. 1,375 rpm External grinding wheel: max. 1,375 rpm Internal grinding wheel: max. 90,000 rpm (high frequency spindle) MACHINE DETAILS Machine dimensions (LxWxH): 3.9 x 2.7 x 2.62 m Machine weight: 6,050 kg EQUIPMENT - Part handling: Manual or with Baumann loader - Exhaust air: Extraction system from LOSMA - Units: Hydraulic and hydrostatic oil supply - Cooling unit for hydrostatics and high-frequency spindle Hslhcowi N Ngsdw Donw

Condition: used, B&R Acopos 1045 servo drive 8V1 removed from Engel robot ERC-6510-E Helsiyzw Eohcdw Dsnw - removed from running machine - fully functionalmanufacturer: B&R type: 8V1045 manufacturer no.: 8V1 spare part no.: Before purchasing, please check whether the Acopos you require also has a 12-pin green plug.  If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Year of construction: 1988, condition: excellent (used), New entry hydraulic surface grinding machine Z&B Ziersch FS 2045 T Bj.88 grinding area 500 x 200 mm - vertical dividing gear - my-Tipp- feed - electronic handwheel - autom. feed - digitalaz. automatic cross feed, continuous and intermittent, micro-fine adjustment cross - magnetic plate with demagnetization hydr. overhead puller - adjustable feet - machine checked through - all functions there - runs very nice ! Pricing; ex stock - subject to prior sale and error. Helhcsk Ufz Nedw Dsnw

Condition: used, B&R servo motor 8LSA57.E1045D NN = 4500 rpm - UN = 400V Hjlhcdjimw S Ajw Dsnw - removed from Battenfeld VM75/60V/60V R1040 - removed from running machine - fully functional manufacturer: B&R type: 8LSA57.E1045D000-0 Dition: gebraucht

Condition: excellent (used), functionality: fully functional, TOMESANI T45/B Edge Sander Specification: Hjlhcdsxb D Acjw Donw • Condition – used • Manufacturer – TOMESANI • Model – T 45/B • Working height – 150 mm • Left/right rotation • Tables measuring 17 x 144 cm and 27 x 120 cm, extendable • Rotating sander body • Motor power – 2.5 HP • Mechanical belt tensioning and oscillation • Own integrated sawdust extraction • Weight – approx. 250 kg • Overall dimensions: 145 x 85 x 120 cm (L x W x H) Additional information: • Very good factory technical and visual condition • The provided photos show the actual condition of the item for sale • Possibility to power up and test the machine on-site

Condition: good (used), Gear motor, electric motor -Power: 0.6 kW -Protection class: IP 22 Hnelsdwdriehcdw Dow -Price: per piece -Number: 1x available -Dimensions: 340/260/H240 mm -Weight: 7.6 kg

Condition: used, Year of construction: 2000, working width: 510 mm cutter head: Leitz - Centrofix number of blades: 4 surface table length: 2200 mm Hjlhcexbnxbedw Djnw fence adjustment: ja maximum workpiece thickness: 220 mm height adjustment thickness table: elektrisch read out for thickness table: Scala feed speed: 7 / 14m/min infeed roller: Stahl outfeed roller: Gummi pressure beam: gegliedert table roller: ja motor power: 5,5 kW motorbrake: ja, automatisch suction connection: 160mm machine length: 2200 mm machine width: 1050 mm weight: 1050

Condition: ready for operation (used), Agie Key Card KCB-01 B 648.644.3 SN: 45690-P 29C, used, minor signs of wear, 100% functional Hnelhji D Twdocdw Dew

Condition: used, machine/vehicle number: 007647, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON1445 B AIRTEC Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON1445 B AIRTEC Hslhcdwjwukyws Djnw

Condition: reconditioned (used), Year of construction: 2014, operating hours: 738 h, functionality: fully functional, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO HAKOMATIC B45 TB510 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2014 with 738 hours of operation 510mm cleaning head (TB510) equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers, resistant to contact with oily liquids, grease, and petroleum products. A built-in battery charger simplifies daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Hnelhexwkd Eecdw Djw Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 510 Suction nozzle working width (mm): 860 Theoretical capacity (m²): 2000 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~230 Power (kW): 1.31 INCLUDED: NEW GEL BATTERIES 12V 105Ah SIAP (2x) NEW 24V 400W suction turbine NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal solution - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (510 mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: used, Year of construction: 2017, functionality: fully functional, Mefiag Satilum filtration system Long Life Unit with control Hslhcjxlqw Uodw Denw 3 units Model: MPF 4500-PP-SY-POL3K-MP10-AUTOFLOW-BYP-B20H

Condition: excellent (used), Multivac R245 in excellent condition. Supplied without forming tool. 422mm wide. 7.8m long. Very low running hours. Hnolhsrp Dygocdw Djw

Condition: good (used), Year of construction: 1994, machine/vehicle number: 229, Offer 22437 Hnjlhsp H Tavscdw Dow Technical data: - Welding current max. 450 A / 36 V 60% ED - 350 A / 32 V 100% ED - Welding current adjustable in 2x 18 switch steps 60 - 450 A - 2 cycle + 4 cycle regulation , points , interval - 2 roller wire feed steplessly adjustable in separate - wire feeder case CLOSS , CK 68 C - intermediate package machine - wire feed approx. 6 running meters - hose package water cooled approx. 4 running meters - ground cable - pressure reducer - connection 400 V / 19 KVA - space requirement approx. W 490 x H 1200 x D 1100 mm - Weight approx. 180 kg

Condition: used, machine/vehicle number: 007645, Type of edging: Thin edge, Thick edge, Solid wood Hslhcdjwuz Niew Donw Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: reconditioned (used), Year of construction: 2012, operating hours: 1,459 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO HAKOMATIC B45 CL TB510 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2012 Only 1,459 hours on the machine! The 510mm cleaning head (TB510) is equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers are resistant to contact with oily liquids, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 510 Suction nozzle working width (mm): 860 Theoretical capacity (m²): 2300 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~230 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 510mm PPL 0.5 disc brush Hnslhjxrlakecdw Dow NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal fluid - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (510 mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 1,437 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO HAKOMATIC B45 CL TB510 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2012 Only 1437 hours on the machine! The 510mm cleaning head (TB510) is equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers are resistant to contact with oily liquids, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. Helhoxpvg Ascdw Donw TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 510 Suction nozzle working width (mm): 860 Theoretical capacity (m²): 2300 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~230 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal fluid - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (510 mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: excellent (used), Year of construction: 2011, operating hours: 2,055 h, functionality: fully functional, working width: 430 mm, area performance: 1,700 m²/h, overall weight: 221 kg, warranty duration: 12 months, tank capacity: 42 l, HAKO HAKOMATIC B45 TB430 scrubber dryer NEW GEL BATTERIES 12V 105Ah SIAP (2x) 2011 year of production The machine's mileage is 2,055 hours 430mm cleaning head (TB430) equipped with a new medium-hard disk brush, enabling work on any surface. Polyurethane astringent rubbers, resistant to contact with oil liquids, greases and petroleum substances. The built-in battery charger facilitates daily operation The protective rubber around the brush head prevents water from splashing outside the outline of the machine The device is equipped with a durable drain and suction hose The new suction turbine ensures high water suction power from the squeegee bar Each device we offer has individually taken photos, you are buying exactly the machine you see TECHNICAL DATA: Supply voltage: 24V Brush working width (mm): 430 Working width of the suction nozzle (mm): 760 Theoretical capacity (m²): 1700 Brush revolutions (rpm): 210 Tank capacity (l): 42/42 Weight of the machine ready for work (kg): ~221 Power (kW): 1.13 INCLUDED: Hjlhcdorzt Atjw Djnw NEW GEL BATTERIES 12V 105Ah SIAP (2x) NEW disc brush 430mm PPL 0.5 Suction strip with oil-resistant rubbers Built-in battery charger Tenzi Normal liquid 5 liters - FREE THE MOST IMPORTANT FEATURES: The 42 liter tank allows you to pour a large amount of cleaning solution, so you don't have to frequently stop working to refill it. Thanks to its design, the machine is very maneuverable. The small turning radius also allows work in narrow passages and alleys. The parabolic squeegee beam ensures accurate suction of the solution from the cleaned surface The large working width (430mm) ensures high surface efficiency Very clear and intuitive control panel.