Control Unit
Brand HAAS
Buowa88zlz
Main Drive
Spindle speed range 12000
Number of axis 4
Movement
X-Axis Movement 508 mm
Y-Axis Movement 508 mm
Z-Axis Movement 508 mm
Media
Main electronic connection 360/480 V 50/60 HZ
This HAAS EC-400 Horizontal Machining Center was manufactured in the year 2007 in the United States. It is operated through a control unit of the same brand. This machine incorporates 4 axis and works with a spindle speed up to 12000 rpm. Renishaw is included.
Application Typ...
x-travel:450 mm
y-travel:450 mm
z-travel:450 mm
weight of the machine ca.:14 t
size of pallet:320 x 320 mm
Double spindle 4-axis machining center Horizontal
4 machine plates
Renishaw probe
Control Siemens Sinumerik 840D
Working space (X / Y / Z): 450x450x450 mm
Load pallet / table max .: 300 kg
Acceleration: 10 m / s²
Rapid traverse: 60 m / min
Pallet size: 320 x 320 mm
Chip-to-chip time: 2.6 s
Workpiece height max .: 700 mm
Tool holder: HSK 63
Tool places: 2x 60
Tool spindle: 10,000 rpm, 95 Nm...
Kitamura
Mycenter HX300if
Control: Fanuc Series 16i-MB
Table: 305 x 305 mm
max.workpiece size 500mm x 560mm
Table load: 250 kg
Spindle: 20,000 rpm
X-axis 510mm
Y-axis 510mm
Z-axis 490mm
4th axis (rotary table) 0.001 ° - 360 °
Tool holders: SK40
Tool magazine: 40-fold
Rapid traverse (X, Y and Z axes): 50,000 mm / min
Number of pallets: 2
Pallet change time: 6 seconds
Machine weight: 9,900 kg
Furnishing:
- Internal coolant supply
- chip conveyor
- handwheel
- Renishaw probe
- Connection of oil ...
Manufacturer: Hitachi Seiki
Model: HG 400
Year of construction: 2000
Control System: Fanuc 15MB
Spindle speed: 10.000
Djl9exr
Tool holder: BT 40
Movement [in mm]: 560/580/510
Pallet size: 400 x 400
Spindle:
Speed: 10.000 rpm
Power: 22 kW
Taper: BT40
NC-Roundtable:
B-Axis: 1°
Palletsize: 400 x 400 mm
In general:
Toolmagazine: 60 Stations
Movmement in X/Y/Z: 560/580/510 mm
Rapid travers in X/Y/Z: 36 m/min
Equipment / Accessories:
Chipmanagement: Chipconveyor
Coolingmanagement: Internal cooling...
The machining center MAKA AR 37 5-axis was built in 2001 in Germany. It is used for the processing of aluminum and PVC profiles. It is equipped with 5 axes, BWO CNC 900C numerical control and a tool magazine.
Technical data of the CNC milling machine:
- CNC control: BWO CNC 900C (512 KB RAM, PC Pentium, 1 GB HD)
- 5 axes (controlled axes: X, Y, Z, A, B)
- maximum control possibilities: X axis: 1630, Y axis: 7300, Z axis: 700, A axis: + -270 degrees, B axis: + -100 degrees
- maximum table length...
x-travel 560 mm
y-travel 450 mm
z-travel 450 mm
rotary table dia. 270 mm
rotary table tiltable 0 - 24 °
spindle taper ISO 30
spindle turning speed range 31,5 - 7100 U/min
feed speeds 1 - 10.000 mm/min
control SINUMERIK System 8
no. of tools in magazin 40
wotkpiece diameter with 2 vacant positions 100 mm
workpiece length 255 mm
weight of tools max. 6 kg
total power requirement 32 kW
weight of the machine ca. 11,6 t
dimensions of the machine ca. m
= 5 axis machining centre
Accessories: var...
Table size 400 x 400 mm.
Number of pallets 6.
Movement x-Axis 560 mm.
y-Axis 510 mm.
z-Axis 510 mm.
Table indexing 1° .
Number of tools in magazine 90 pieces.
Maximum spindle speed 15.000 tr/min.
Tool taper DIN 69871a.
CNC Control M-Plus
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
Bubutsc7df
Control: FANUC 18i-M
X-axis: 510 mm
Y-axis: 510 mm
Z-axis: 510 mm
Max. load of the pallet: 250 kg
Clamping surface of the pallet: 400 x 400 mm
Positioning of the table: 90 ° steps
Max. diameter of the workpiece: 560 mm
Max. Workpiece height: 630 mm
Spindle speed range: 35- 15000 min-1
spindle nose: ISO40
Cutting feed: 40 m/min
Buczyvwmx2
rapid traverse: 60 m/min
Tool changer 24 stations
tool change time (from chip to chip): 2,8s
Pallet change time: 6,3s
Special features of the machine are:
-Hig...
HECKERT CWK 400 machine still in use
for sale at a good price !
Control: SIEMENS 840
O90tr
X-axis 650 mm,
Y-axis 650 mm
Z-axis 650 mm,
pallet changer number of pallets 2
pallet clamping surface 400 x 400 mm
Drive power 24/35 kW
Speed range 50 - 15.000 min-1,
tool holder HSK 63,
tool changer 60-fold
IKZ - internal coolant supply
chip conveyor
and more
x-travel: 500 mm
y-travel: 450 mm
z-travel: 350 mm
B-axis (table): 360° °
control: Mitsubishi Meldas 500M CNC
number of spindle speeds: ca. 9 - 5000 U/min
tool taper: SK40
tool turret - number of stations: 20 Stück
rotary table dia.: Ø 350 mm
Table dimensions: LxB: 800 x 380 mm
table load: ca. 0,3 t
feed continuous: 0 - 4500 U/min
rapid traverse: 0 - 10.000 mm/min mm/min
weight of the machine ca.: 3,0 t
dimensions electric cabinet LxWxH: 1,2 x 0,55 x 2,0 m
dimension machine xH: 3,8 x 2,2 x 2,0 ...
Control Unit
Brand Fanuc
Model Series 18i M
Main Drive
Spindle speed range 15000
Movement
X-Axis Movement 450 mm
Y-Axis Movement 400 mm
Z-Axis Movement 400 mm
This Matsuura ES 450-H2 horizontal machine center was manufactured in the year 2000. It has been working for approximately 14500 hours. It is operated through a Fanuc Series 18i-M control unit. This machine counts with a spindle speed range up to 15000 rpm. It presents good conditions.
Bs0ddshie2
Application Types
Milling
x-travel 560 mm
y-travel 510 mm
z-travel 510 mm
Dyhorlt
Control Mazatrol M32
Main spindle:
turning speed range - main spindle 50 - 10.000 min/-1
power capacity - main spindel 20 / 13 kW
tool taper SK 40
distance spindle center to table 30 - 540 mm
distance Spindlenose and center of table 100 - 610 mm
pallet changer:
numbers of pallets 2
size of pallet 400 x 400 mm
max. workpiece weight 400 kg
tool magazin:
number of toolpositions 90 pos.
tool taper SK 40
max. tool diameter 95 / (150) m...
Make: CHIRON,
Type: FZ 12 S
Year of manufacture: 1996
Control: Siemens 810M GA3
Condition: used
machine no.: 474-29
Traversing range
x-axis: 550 mm
y-axis: 300 mm
z-axis: 425 mm
Tt8mnb3b
Rapid traverse speed in X-, Y- and Z-axis 40 m/min.
Main spindle drive with AC motor
speed range: 20 - 10.500 min-1 - 35NM
Automatic tool changer
Tool places 20
Tool shank SK 30
Additional equipment for the machine:
■ 2-axis swivel unit ZAS160
Coolant tank with surge water pump
Hydraulic clamping device
■ 3 clam...
Catalog No. : 5374
Type: H 40 TREND
Producer: ZPS
Made in:
Characteristic:
Control system: Siemens 840 D
Length of the working table: 400 mm
Width of the working table: 400 mm
Number of tools in the magazine: 45 pcs
M9rgzd
Maximum rotary speed of the spindle: 10000 1/min
Travel length X-axis (mechanical feed): 560 mm
Travel length Y-axis (mechanical feed): 510 mm
Travel length Z-axis (mechanical feed): 560 mm
Machine height: 2616 mm
Machine length: 4730 mm
Machine width: 2540 mm
Mac...
Kitamura Mycenter HX 300 iF,
Year of manufacture 2007,
control Fanuc 16i MB,
travel X/Y/Z 510/510/490 mm,
B axis rotary table 0,001°,
tool changer 40 times,
internal coolant supply IKZ 15 bar,
chip conveyor,
handwheel,
Renishaw probe,
connection for oil mist suction,
Buj0apntaj
pallet changer 2-fold,
pallet size 305 x 305 mm,
x-travel: 500 mm
y-travel: 320 mm
z-travel: 400 mm
Bi0ufksq
control: Siemens Sinumerik 810M/GA30
tool taper: AXA Direkt Stirnaufnahme
spindle speed:: 30-6000 U/min
table-size: LxB: 800x420 mm
table surface area: LxB: 600x420 mm
tool turret: 12-fach
total power requirement: 18 kVA
weight of the machine ca.: 3,3 t
dimension machine xH: 3,0x1,9x2,5 m
Machining Center 4-axis via rotary table (index head) A-axis 360°
- swarf conveyor ( hinged belt conveyors ) ejection height=650mm
- coolant device
-...
Control Unit
Brand MAZATROL
Model 640M PC-FUSION-CNC
Main Drive
Spindle speed range 0/12000
Number of axis 4
Movement
X-Axis Movement 560 mm
Y-Axis Movement 610 mm
Z-Axis Movement 560 mm
Table
Oxqqh
Outer length 400 mm
Outer width 400 mm
Table load 400 Kg
Media
Chip conveyor Yes
This Mazak FH-4800 Horizontal Machining Center was built in the year 2000 in the United Kingdom. This 4 axis machine can work with a spindle speed up to 12000 rpm and a travel speed of 30000 mm/mn. It is equipped wi...
x-path: 600 mm, y-path: 450 mm, z-path: 495 mm, tool holder: ISO40, spindle speeds: 50-5000, rapid traverse: x, y, z: 10 m/min, feed force: all axes 10000 kp
N0ghh
2 x Machine FMS System.
22 Pallets in the system.
Makino A55
Year 2001.
Fanuc 16MC
Pallet size 400 x 400 mm.
Workpiece weight 500 kg.
4th axis NC-rotary table B-Axis 0.001°.
X 560 mm.
Y 560 mm.
Z 560 mm.
Feeds to 40000 mm/min.
Spindle drive motor rating 22 KW.
Spindle speeds 50 ~ 14000 rpm.
126 station tool magazine.
Tool taper HSK-A63.
Makino A55e
Br0mt3wcqz
Year 2001.
Fanuc 16iM
Pallet size 400 x 400 mm.
Workpiece weight 500 kg.
4th axis NC-rotary table B-Axis 0.001°.
X 560 mm.
Y 560 mm.
Z 6...
control system, make Siemens, type Sinumeric 840D, 2 spindles, spindle speed 0 - 10,000 rpm, tool holding fixture HSK-A63, spindle distance ??, IKZ 70 bar, travel X/Y/Z 450/450/450 mm, universal turn/swivel table (4.+5. axis), mechanical tool monitoring, tool changer, 2x 40 stations, designed as chain magazine, spindle cooling system, chip conveyor, make Knoll, type AE1110, oil mist/extraction filter system, make ifs, type IF-Vario E2000, hour meter reading (total) 23,728
Lot 236H
Bhz0hxn
Matsuura H-Plus 300
Technical data (machine specifications)
(PC2, matrix tool magazine) 4 axes machine
Control: Fanuc 30i
X-axis: 500 mm
Y-axis: 500 mm
Z-axis: 500 mm
B-axis: 360
Dx2p2i
New spindle April 2020
Laser tool control system Renishaw OMI-2
Number of pallets 2
Pallet workpiece areas (X x Y) 300 x 300 mm
Pallet load capacity 250 kg
Pallet indexing (A / C axis) 1°
Pallet switching time 1,5 sec/90°.
Number of tools: 120 pieces
Distance between pallet surface and spindle centerline 80 - 580...
10
Condition: Screw gear defective
Control: Siemens 840 C
Travel: X 400 mm
Travel: Y 450 (700) mm
Travel: Z 400 mm
Counter bearing: hydr. clamped
Clamping bridge supports: 2 sets for holding one clamping bridge with 4-way hydraulic and 1-way pneumatic connection
Fogwhqjr
Oil distributor: 4-fold hydraulic, 1-fold pneumatic
Included: Extended coolant system,Automatic loading doors
Emulsion mist separation system: air volume 900cbm/h
The screw gear is defective. The repair costs amount to approx. EU...
Type DZ-15Kw
Year: both 2003 (identical in construction)
Control Siemens 840D
2 spindles with 12.000 rpm each
travel X axis 500mm Y axis 400mm Z axis 260mm
rotary table 360° swivelling
Tools 2x24 HSK 63
Tool Dm max. 82mm
Tool Dm max. with free neighbour place 125mm
Tool length max. 250
Tool weight max. 5kg (10Kg with reduced chain speed)
Clamping to clamping time approx. 2,4sec.
KSS internal flushing of tools by spindle
Work area flushing
Bue37ec0ne
Jig flushing
Knoll KSS system 900Liter
Hydraul...
Stock number : Z100000331
Brand : DMG MORI
Model : DMC 55 H DUOBLOCK
Year of Production : 2008
Control : SIEMENS 840 S SL SOLUTIONLINE
Axis Movement : X 560 MM / Y 600 MM / Z 600 MM / B 360 ° / 0.001 °
Spindle Speed : 12.000 MIN/-1
Tool Holders : SK 40
Number of toolposition : 60
In-team quenching : 40 bar
2-TABLE SURFACE AREA : 400 X 400 MM
MAX. TABLE LOAD : 500 KG
WEIGHT OF THE MACHINE : 12.000 KG
DIMENSIONS OF THE MACHINE : 4.02 X 2.66 X 2.46 M
NUMBER OF PALLETS : 2
Bubtspqmtw
TURNING SPEED R...
CNC Control: Mazatrol PC Fusion 640M.
Pallet size: 400 x 400 mm.
Number of pallets: 2.
Btfdldnugy
X-Axis travel: 560 mm.
Y-Axis travel: 510 mm.
Z-Axis travel: 630 mm.
B-Axis swivel: 360x1°.
Spindle taper: CAT 40.
Number of tools stored in magazine: 40x.
Spindle speed: 35-12.000 RPM.
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
x-travel 710 mm
y-travel 510 mm
z-travel 510 mm
Control Mazatrol M 32
size of pallet 500x500 mm
spindle taper ISO 40
Go88q9g
turning speeds 50-10000 U/min
Spindle capacity 7,35 KW
tool magazin: 60
Cooling through the spindle bar
numbers of pallets 6
total power requirement kW
weight of the machine ca. 8,5 t
dimensions of the machine ca. m
DECKEL - DC 45 - 1991- many tools and tool holders available
Bjbattrtul
Made in Japan
Technical specifications:
Working hours: 44.576 H
Control Unit: Mazatrol 640M
X-axis: 560 mm
Y-axis: 610 mm
Z-axis: 560 mm
Table size: 400 mm x 400 mm
Table indexing: 360x1°
Max. Weight on pallet: 400 Kg
Pallets changer: 6
Tools changer: 120
Max. Spindle speed: 35-12000 min
Tool holder: Cat 40
Dimensions:
Length: 4318 mm
Width: 2692 mm
Bhjxje33tp
Height: 2616 mm
Weight: 2500 Kg
More info:
The machine has 120 tools, 12000 rpm cooling through the shaft.
Carousel with 6 x 400mm pal...
For sale is a used lid Dmc 60 H,
Boxn8a8r9f
the machine is in a very good condition
and can be visited under power. For technical data please see pictures.
CNC horizontal machining centre
Okuma MX-40HA
date of construction 01-1998
400V
x-axis 560mm
y-axis 610mm
Gxaj2c
z-axis 560mm
incl. chip conveyor
machine is already dismantled
Table size 400 x 400 mm.
Number of pallets 2.
Movement x-Axis 560 mm.
y-Axis 510 mm.
z-Axis 510 mm.
Table indexing NC Rotary 15°.
Number of tools in magazine 24 pieces.
Maximum spindle speed 10.000 tr/min.
Tool taper MAS BT 40.
CNC Control Mazatrol M Plus
Ynuzo
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
SPINDLE
- Spindle speed : 18000 rpm
- Spindle taper : CAT 40
Btnxyeorsh
AXIS
- Axis strokes: X=560 - Y=630 - Z=640 mm
- Rapid travers rates : X - Y - Z = 60 m/min
PALETTE
- 4th axis 360,000 positions
- Number of pallets : 2
- Pallet dimensions : 400 x 400 mm
TOOL STORE
- Tool changer : 80 tools
- Maximum tool weight : 12 kg
OVERALL
- Machine dimensions : 4500 x 2200 x H2800 mm
- Machine weight : 12800 kg
Equipped with:
- 1 CN MAZATROL MATRIX NEXUS
- 1 Set of tool holders
- 1 Chip conveyor
DECKEL - DC 55 - 1990- many tools and tool holders available
Bjbat7czim
Control Unit: MAZATROL Model 640M PC-FUSION-CNC
Year:2001
Spindle speed: 25000
Number of axis 4
Indexing: 1°
Tool changer: 120 tools
BT40
X-Axis Movement 560 mm
Y-Axis Movement 610 mm
Z-Axis Movement 560 mm
Lg9vucu
Pallet dimensions: 400 x 400 mm
Equipped with:
Gmcs0ktta
Chip conveyor
The horizontal milling center DECKEL MAHO DMC 50H was produced in 2001.
Technical parameters :
- CNC control: SIEMENS SINUMERIK 840D
- data transmission: RS232
- two-pallet machine: pallet dimensions: 400 x 400 mm
- table load: 250 kg / for processing with one pallet, 400 kg / for processing with two pallets
- spindle: 0-18000 rpm. (30 kW)
- type of tool holder: HSK63
- travel range in the X axis: 560 mm x 0.001 mm
- travel range in the Y axis: 560 mm x 0.001 mm
- travel range in the Z axis: 51...
JAPANESE HORIZONTAL CENTER "NIGATA"
Working in all its parts!!!!
TECHNICAL FEATURES:
High spindle pressure!
Pallet area (LxP) mm 500x500
Pallet n. 2
*Table rotation in *CONTINUOUS* g./min 7*
Longitudinal stroke (X axis) mm 800
Transversal stroke (Y axis) mm 700
Vertical stroke (Z axis) mm 550
Max. permissible load on the table kg 800
Hezdow2v
Spindle nose BT 50
Spindle speed rpm 4500 (2 ranges)
Spindle motor kw 11/15
Tool magazine capacity n. 60 (chain)
Year 1991
Fanuc 15M
Table size 400 x 400 mm.
Number of pallets 2.
Movement x-Axis 560 mm.
y-Axis 510 mm.
z-Axis 510 mm.
Table indexing NC Rotary 1°.
Number of tools in magazine 30 pieces.
Maximum spindle speed 10.000 tr/min.
Tool taper MAS BT 40.
CNC Control Mazatrol M Plus
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
Fsn7aocri
PALLETIZED MACHINING CENTER - HORIZONTAL MATSUURA ES 450-H2
• Fabricated year 2002
• Courses (X,Y,Z):450x400x400mm
Dwf37e
• Automatic spin - Pallet 1º
• Pallet 300x300mm
• Spindle speed 15.000 rpm
• Internal cooling
•Hight pressure cooling pump
•Hours 14.330 h
- system OKUMA OSP-U100M - table: 400x400 mm - spindle motor: 20 kW - spindle taper: SK40 - spindle RPM: max 10000 (tested on 7000 RPM)- table load: 800 kg - spindle diameter 70 mm - X/Y/Z=560/610/560 mm - pallet size 400x400 mm - videos availableDIMENSIONS: L4100 x W2600 x H2800 mm + maybe some small parts (transformer, chip conveyor, ...)
Bpxlodvd8y
Control Unit: MAZATROL Model 640M PC-FUSION-CNC
Lg9vucu
Year:2001
Spindle speed: 25000
Number of axis 4
Indexing: 1°
Tool changer: 120 tools
BT40
X-Axis Movement 560 mm
Y-Axis Movement 610 mm
Z-Axis Movement 560 mm
Pallet dimensions: 400 x 400 mm
Equipped with:
Chip conveyor
CNC Control: MSX-501III
Axes
X-axis mm: 560
Y-axis mm: 560
Z-axis mm: 620
B-axis degree: 360
Pallet
Dimensions mm: 400 x 400
Number of pallets: 2
Max. workpiece weight kg: 400
Max. workpiece turning diameter mm: 630
Max. workpiece height mm: 900
Spindle
Spindle speed rpm: 14 000
Tool system
Tool type: BT 40
Positions in magazine St.: 40
Equipment
Without internal cooling
RENISHAW probe
Machine running times
Main switch ON Standard: 36.459
Operating time: 27,049
Bri3ldwnm0
Basic machine ...
CNC - Horizontal - Machining Center Vc-H400, Year 2012, Machine hours approx. 40.000
Serial-No.: HA1-1128, with FANUC 21i-MB control, Manual Guide i, colour screen 10,4", DDS motor spindle with 14.000 rpm
and standard accessories
Machine door in RAL colour: 7024 (black)
Technical data:
Travel X/Y/Z: 500/600/500 mm
rapid traverse X/Y/Z: 48/48/48 m/min.
Spindle speed: 14.000 rpm.
drive power: 22,0/18,5 KW
tool magazine: 60 tools
tool holder: SK40 MAS-BT
standard options:
- automatic overload prote...
Table size 400 x 400 mm.
Number of pallets 6.
Movement x-Axis 560 mm.
y-Axis 560 mm.
z-Axis 510 mm.
Table indexing 1° .
Number of tools in magazine 60 pieces.
Maximum spindle speed 12.000 tr/min.
Tool taper CAT 40
CNC Control M-Plus
Btbtj3mtw0
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
Travel
X - 560mm
Y - 500mm
Z - 510mm
Table
400 x 400mm, indexing 1°
Spindle speed
10000 rpm
Tool magazine
120, Mas BT40
No internal cooling
Owrzhxr7
Pallet pool
12 fold.
Spindle motor
11/7,5KW
Machine weight
10t (without pool)
Space requirement (with pool)
Approx. 4mx11m
Control system
Fanuc 15MA
Options
Tool breakage control
Renishaw probe for automatic correction
