Used Gmx 200 Linear for sale (18,259)

Condition: used, Year of construction: 2004, operating hours: 11,022 h, functionality: fully functional, machine/vehicle number: 07520000211, turning length: 1,070 mm, turning diameter over cross slide: 400 mm, turning diameter: 560 mm, spindle motor power: 37 W, spindle speed (max.): 4,000 rpm, spindle bore: 79 mm, travel distance X-axis: 485 mm, travel distance Y-axis: 160 mm, rotational speed (max.): 12,000 rpm, Equipment: rotational speed infinitely variable, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included are a coolant treatment system and a quality selection of tools HSK 63 - A, approximately 40 tools. Also included is a Berg chuck, see photos. The machine is being sold due to lack of orders. 49,700 power-on hours, 11,022 spindle hours. The machine can be inspected and tested at any time. Loading is possible without any issues. Bodpfx Akoug Uc Nenoln

Condition: good (used), Year of construction: 2006, CNC Milling / Turningcenter Machine type: DMG GMX 200 linear Control: Siemens 840D Year: 2006 SPECIFICATIONS Max. swing over bed: 560 mm Turningdiameter: 400 mm Spindle speeds: 0 - 4.000 rpm Spindle power: 45 / 36 kW Torque: 750 Nm C-Axis CNC-Spindle tilting for cutting and turningopertations Max. revolution: 12.000 rpm Spindle power: 13,2/22 kW Travel X-Axis: 485 mm Y-Axis: 80 +/- mm Z-Axis: 1.070 mm Rapid motion: (X/Y/Z): 40 / 24 / 70 m/min. Angular range: +/- 120° Tailstock: NC Quill: MK 5 Blodpoziy D Sefx Aknjn Equipment Steady rest: SMW SLU-3.1 Chip conveyor paper band filter Cooling pumps: 8 bar; 20 l/min

Condition: repair required (used), Year of construction: 2005, operating hours: 20,000 h, functionality: not functional, Machine Type: CNC Turning and Milling Center Manufacturer: GILDEMEISTER Type: GMX 200 linear Year of Manufacture: 2005 Control System: Siemens 840 D powerline Location: Ober Ramstadt Technical Details Turning Diameter: max. 560 mm Turning Length: 1,070 mm Control System: Siemens 840 D powerline Distance between Spindles: 1,000 mm Main Spindle: Max. Speed: 5,000 min/-1 Drive Power - Main Spindle: 25 / 37 kW Max. Torque: 390 Nm Spindle Diameter in Front Bearing: 120 mm Spindle Bore: 79 mm Max. Bar Diameter: 68 mm C-Axis: 0.001 ° Chuck Diameter: 200 - 315 mm Bsdpfezd Dw Eox Aknjln Milling Spindle: Speed: max. 12,000 min/-1 Drive Power - Milling Spindle: 13.2 / 22 kW Max. Torque: 100 Nm Tool Interface: capto Holding Torque: Y-Axis: +/- 80 mm B-Axis: +/- 120 ° C-Axis: 1 ° X-Axis Travel: 485 mm Bearing Diameter: 80 / 55 mm Counter Spindle: Max. Speed: 5,000 min/-1 Drive Power - Counter Spindle: 25 / 37 kW Max. Torque: 320 Nm Spindle Diameter in Front Bearing: 120 mm Spindle Bore: 79 mm Max. Bar Diameter: 68 mm C-Axis: 0.001 ° Max. Chuck Diameter: 315 mm Tool Magazine: Number of Tool Positions: 46 pos.HSK 63 A Tool Interface: Max. Tool Diameter: 80 mm Max. Tool Diameter with Free Neighbor Position: 150 mm Max. Tool Length: 300 mm Total Power Requirement: 75 kVA Machine Weight Approx.: 14.0 t Space Requirement Approx.: 8.0 x 4.5 x 3.1 m Accessories Documentation: Chip Conveyor: Coolant System: 8 / 20 bar C-Axis: B-Axis: Y-Axis: Tool Magazine: Counter Spindle: Milling Spindle:

Condition: good (used), Year of construction: 2004, operating hours: 4,900 h, functionality: fully functional, turning length: 1,070 mm, turning diameter over cross slide: 400 mm, turning diameter: 560 mm, spindle motor power: 37 W, spindle speed (max.): 4,500 rpm, Gildemeister GMX 200 Linear (2004) KUKA KR 150-2 Robot (2004) Automated Mill-Turn Production Cell For sale: High-performance automated machining cell comprising a Gildemeister GMX 200 Linear mill-turn center and a KUKA KR 150-2 industrial robot. The system is engineered for efficient, flexible, and unmanned production operations. CNC Lathe / Mill-Turn Center Blodjx Iflhepfx Aknsn Gildemeister GMX 200 Linear – Technical Specifications General Manufacturer: Gildemeister Model: GMX 200 Linear Year of manufacture: 2004 Machine type: CNC mill-turn center Control system: Siemens Sinumerik 840D Drive technology: Linear motors on X, Y, and Z axes Turning Maximum turning diameter: 560 mm Turning diameter over cross slide: 400 mm Maximum turning length: 1,070 mm Bar capacity: 65 mm Axes and Travels X-axis travel: 485 mm Y-axis travel: 160 mm Z-axis travel: 1,070 mm B-axis swivel range: ±110° Main Spindle Spindle speed: 5,000 rpm Spindle power: 37 kW Tool interface: HSK-A63 Milling Milling spindle speed: 12,000 rpm Tool holder: HSK-A63 Tool System Number of tool positions: 48 Automatic tool changer Equipment Y-axis B-axis milling unit Linear motor technology Chip conveyor Central coolant system Full CNC integration for robotic automation Industrial Robot KUKA KR 150-2 – Technical Specifications General Manufacturer: KUKA Model: KR 150-2 Robot type: 6-axis industrial robot Year of manufacture: 2004 Application: Part handling / automation Load and Reach Maximum payload: 150 kg Maximum reach: 2,700 mm Axes Number of axes: 6 Axis Motion range A1 ±185° A2 −155° / +35° A3 −120° / +158° A4 ±350° A5 ±125° A6 ±350° Axis Speeds A1: 120 °/s A2: 110 °/s A3: 110 °/s A4: 190 °/s A5: 180 °/s A6: 260 °/s Accuracy Repeatability: ±0.2 mm Controller and Electrical Controller: KUKA KRC2 Power supply: 3 × 400 V / 50 Hz Installation Mounting: Floor-mounted Installation position: Freely programmable Itsbmtox Iflhj Dty Aoc Weight Robot weight: 1,245 kg Production Cell Advantages - Turning and milling in a single setup - Automated part loading and unloading - Suitable for serial production and unmanned operation - High precision and productivity - Ideal for CNC job shops and industrial manufacturing 📍 Location: Finland 🚚 Delivery: Transportation can be arranged 📄 Condition: Used ℹ️ Note: Technical specifications to be verified with the seller prior to purchase.

Condition: used, Year of construction: 2008, operating hours: 51,226 h, functionality: fully functional, Control system: HEIDENHAIN Plus iT with Turn Plus Turning length: 1175 mm (tailstock machine 1100 mm) Bsdpfozx Agzex Akneln Tool holder: HSK 63A (DIN 69893) Tool magazine: 1 x 36-position disc magazine Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and expert reassembly – all from a single source. Billing based on individual terms and conditions and duration. Contact us for your personal offer.

Condition: used, Year of construction: 2003, Technical details: turning diameter: 640 / 400 mm turning length: 1500 mm control: Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z: 550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis): ±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/24/60 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 12 / 23 kW Torque of milling spindle: 100 Nm Tool magazine for milling spindle (turret 1): 120 HSK-A 63 Tool change time tool/tool, milling spindle: 1,6 s Spindle 1 RPM: 4000 1/min Spindle 1 power: 36/ 45 kW Spindle 1 Torque: 730 Nm Spindle 1 max. bar diameter: 90 Spindle 2 RPM: 4000 1/min Spindle 2 power: 36 / 45 kW Spindle 2 torque: 730 Nm Spindle 2 max. bar diameter: 90 c-axis: 0,001 ° Travel turret 2 x: 225 mm Travel Turret 2 z: 1595 mm RPM of rotary tools turret 2: 4000 1/min no. of tools in turret 2: 12 VDI 40 high-pressure pump: 20 bar total power requirement: 110 kVA weight of the machine ca.: 24 t dimensions of the machine ca.: 9,3 x 4,6 x 3,1 m Accerories Chip conveyor Automatic door High performance turning and milling center with milling head (X, Y, Z, B-Axis), tool magazine with 120 pos. HSK-A 63. Excellent for manufacturing excentric parts. Coolant system with 1000 l tank and coolant system 4 kW. Both spindles have differencial pressure clamping system Steayrest for lower turret dia 8-101 mm. Parts gripper for turret No. 2 with 3-jaw chuck for parts with max. dia. 140 mm. Conveyor belt for finished parts. Preparation for 3D-probe Toolmonitor Artis Machine can be shown under power. Bljdpfxeyv Dnke Aknen *

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 21,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 1,185 mm, total height: 3,040 mm, total width: 4,100 mm, overall weight: 15,000 kg, controller manufacturer: HEIDENHAIN, controller model: Plus IT 3D CNC Pilot 4290 plus it, product length (max.): 7,800 mm, number of axes: 7, This 7-axis DMG GILDEMEISTER GMX 250S Linear was manufactured in 2008. A turn-mill centre featuring the advanced Heidenhain Plus IT 3D CNC Pilot 4290 control unit, it represents the pinnacle of turning and milling capabilities. Contact us for more information. - Guide Way Type: Roller guide ways- Main Spindle: - Drive Power (100% ED): 21 kW - Drive Power (40% ED): 28 kW - Spindle Speed Range (100% ED): 5000 rpm - Spindle Speed Range (40% ED): 5000 rpm - Base Speed: 850 rpm - Torque max. (40/100% ED): 240 / 320 Nm - Drive Type: AC/1, Integrated Spindle Motor 76 - C-Axis Speed: 5000 rpm - C-Axis Torque: 320 Nm - C-Axis Resolution: 0.001 deg - Chuck Diameter: 200 - 315 mm - Bar Capacity max.: 65 mm - Spindle Flange: Flachflansch 170 h5 - Spindle Bore Diameter: 80 mm - Clamping Cylinder Bore Diameter: 67 mm - Diameter in Front Bearing: 120 mm- Tool Spindle / Milling Spindle: - Tool Holder: HSK63-A - Spindle Speed max.: 12000 rpm - Drive Power (100% / 40% ED): 13.2 / 22 kW - Torque (100% / 40% ED): 60 / 100 Nm- Spindle 2 (Counter Spindle - option): - Drive Power (100% / 40% ED): 21 / 28 kW - Speed max.: 5000 rpm - Chuck Diameter: 315 mm - Bar Capacity max.: 65 mm- Working Range / Turning Diameter: - Swing diameter max.: 640 mm - Turning diameter max.: 520 mm - Turning diameter over counter spindle max.: 400 mm - Turning diameter over counter spindle & turret max.: 250 mm - Turning diameter over tailstock max.: 400 mm - Spindle distance: 1500 mm - Turning length (short / long): 1175 mm - Workpiece weight chuck parts (flange weight) max.: 150 (100) kg - Workpiece center of gravity from spindle flange max.: 200 mm - Workpiece weight shaft parts with tailstock max.: 800 kg- Slide Travel: - Slide 1 (top): X1 = 550 mm, Y1 = 180 mm, Z1 (short/long) = 1185 mm, B1 = 240 deg - Slide 2 (option): X2 = 180 mm, Z2 (short/long) = 1050 mm - Slide 3 (counter spindle): Z3 (short/long) = 1150 mm- B-Axis: - Swivel speed max.: 30 rpm - Torque B-Axis (S6-40%/max.): 2860 / 5720 Nm - Resolution B-Axis: 0.001 deg - Clamping hydraulic (at 30 bar): 2000 Nm- Tool Magazine: - Number of tool pockets: 36 - Tool weight max.: 8 kg - Tool length max.: 400 / Ø80 mm - Tool length max. with free space: 250 / Ø125 mm - Tool diameter standard: Ø80 mm - Tool length max. without free space: 230 / Ø80 mm - Turning tool f-dimension standard: 40 mm - Turning tool f-dimension with free space max.: 62.5 mm - Tilting moment tool standard max.: 60 (100) kg/cm - Lifting movement: 85 mm- Turret 2 (Option): - Driven Tools Equipped: Yes - Number of tool stations: 12 - Shaft diameter acc. to DIN 69880: 40 mm - Number of driven tools: 12 - Drive power (max. 100% ED): 10.7 kW - Torque (max. 100% ED): 32 Nm - Speed range: 4000 rpm - Indexing time (30/180 deg.): 0.34 / 0.64 s - Tool load max.: 100 kg - Permissible imbalance due to tool loading: 63 Nm- Feed Drives & Rapid Traverse (Schlitten 1, 2, 3): - Rapid traverse X/Ys/Z (Slide 1): 40 / 24 / 70 m/min - Feed force X/Ys/Z (Slide 1, S6-40%): 7 / 11 / 7.5 kN - Travel resolution X/Ys/Z (Slide 1): 0.001 mm - Ball screw X (Slide 1): Ø32 x 20 mm - Ball screw Ys (Slide 1): Ø40 x 15 mm - Linear motor Z1-Axis: 1FN3600-4WB00 - Rapid traverse X/Z (Slide 2): 24 / 36 m/min - Feed force X/Z (Slide 2, S6-40%): 9 / 11 kN - Rapid traverse Z (Slide 3): 36 m/min - Feed force Z (Slide 3, S6-40%): 13 kN- Coolant & Chip Conveyor: - Coolant capacity: 370 l - Drive power: 0. Blsdpfx Akjyfv Rbenon

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning & Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power line Technical Specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm Bljdpfx Akswzbq Tsnsn B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed, driven tools: Number of turret stations: 12 pcs Tool holder: VDI 40 Accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Tailstock function on counter spindle - Automatic sliding doors

Condition: ready for operation (used), Year of construction: 2005, operating hours: 53,201 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 1,585 mm, controller manufacturer: SIEMENS, tool weight: 10,000 g, number of axes: 7, This 7-axis Gildemeister GMX 400 Linear was manufactured in 2005. It features a maximum turning diameter of 640 mm and a turning length of 1585 mm. The machine is equipped with a Siemens Sinumerik 840D Powerline CNC control and offers rapid traverse speeds of 40 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister GMX 400 Linear turn-mill centre we have for sale. Contact us for further details. • B-axis swivel range: ±120° • C-axis resolution: 0.001° • Rapid traverse (X/Y/Z): 40 / 24 / 60 m/min • Maximum turning diameter: 640 mm • Standard turning diameter: approx. 400 mm • Maximum turning length: 1585 mm • Bar capacity: approx. 90–92 mm • Chuck diameter: 250 mm • Counter spindle speed: 4000 rpm • Maximum torque: approx. 600–730 Nm • Milling spindle: Integrated motor spindle (ISM) with B-axis • Milling spindle speed: 12,000 rpm • Milling spindle power: 13.2 / 22 kW • Milling spindle max. torque: approx. 100 Nm • Turret: 12-position driven turret • Tool shank: 40 mm, DIN 69880 • Tool length limits: 200–350 mm • Maximum tool diameter: 80–140 mm • Maximum tool projection: 60–70 mm Bledpfxey Uvxxj Aknen • Connected load: 100 kVA • Additional notes: Linear drive technology; Made in Germany; Machine under power and available for inspection Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2005, turning diameter 640 mm turning length 1.185 mm control SINUMERIK 840D swing diameter 640 mm distance of spindle heads 1500 mm slide I: X1 / Y1 / Z1 / B slide travel X-axis 550 mm slide travel Z-axis 180 mm Z- Travel 1.185 mm B - axis 240 ° feed x-axis 0 - 40.000 mm/min feed y- axis 1 - 24.000 mm/min Feed z- axis 1 - 70.000 mm/min feed B-axis 1 - 20 1/min rapid traverse X/Y/Z 40 / 24 / 70 m/min feed capacity X/Y/Z S6: 7,00/11,00/7,50 kN tool taper HSK 63 turning speed milling-spindle 10 - 12.000 1/min power capacity at 100 % load 13,20 kW power capacity at 40 % load 22,00 kW Bledpfsydfllsx Aknen torque milling spindle 60 / 100 Nm no. of workpieces in the magazine 46 Stück tool length - max. 350 / 200 mm tool diameter 80 mm wotkpiece diameter with 2 vacant positions 120 mm weight of tools max. 6 / 10 kg slide II: X2 / Z2 slide travel X-axis 180 mm Z- Travel 1.050 mm feed x-axis 1 - 24.000 mm/min Feed z- axis 1 - 36.000 mm/min rapid traverse x + z axis 24 / 36 m/min feeding force S6: 11,00/9,00 kN turret (x-stations) 12 tool taper DIN 69880 Ø40 Driven tools - quantity 12 Driven tool turning speed 1 - 4.000 1/min power capacity at 100 % load 10,70 kW torque S1: 32 Nm Slide III - longitudial travel Z3 mm Z- Travel 1.150 mm Feed z- axis 1 - 36.000 mm/min rapid traverse Z-axis 36,00 m/min feed capacity Z - axes S6: 13,00 Nm Main spindle ISM90 turning speed main-spindle 10 - 4.000 1/min power capacity at 100 % load 36,00 kW power capacity at 40 % load 45,00 kW max. torque at 40% / 100% load 800 / 630 Nm spindle bore 80 mm turning speed opposed-spindle 10 - 5.000 1/min power capacity at 100 % load 21,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 320 / 240 Nm spindle bore 80 mm total power requirement 70,00 kW weight of the machine ca. 20,00 t dimensions of the machine ca. 8,50 x 4,50 x H3,10 m Machine with SIEMENS SINUMERIK 840D control, main- and counter-spindle, chip conveyor, dust exhauster, DMG-automation WH10top. Main-spindle ISM90: hollow clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter-spindle ISM76: closed center clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-up device with integrated conveyor belt, automatic protective cover, differential pressure clamps. Incl. pump-frame for coolant - Pump 1: 17 l/min at 80bar - Pump 2: 20 l/min at 8bar - Pump 3: 40 l/min at 20bar Without coolant unit. Was connected to a central coolant-system. Accessories: Hainbuch collet chuck incl. collets Ø30,45,50,55,60,65,72,82,85,90 1 piece workpiece pick-up-gripper for turret

Condition: excellent (used), Year of construction: 2013, operating hours: 8,000 h, functionality: fully functional, overall weight: 5,000 kg, load capacity: 200 kg, arm reach: 3,000 mm, controller model: IRC5, input voltage: 400 V, input current: 32 A, type of input current: AC, ABB IRB 6650S 200/3.00 robot on ABB IRBT 6004 8 meter linear track. The robot has only 8000 working hours and it is fully functional. Robot can be seen at our facilities. If any additional options needed for the robot, like camera, we can add it. 644-2 German Bljdpfx Asyk Aizoknjn 840-2 Profibus Fieldbus Adapter 608-1 World Zones 611-1 Path Recovery 617-1 FlexPendant Interface 623-1 Multitasking RW Drive module 1 key ABB standard manipulator IRB 6600/6650 Axis 1 standard work range 6650S-200/3.0 No motor fan Drive System 09 4600/66x0/460/660/760 Additional drive ADU-790A in position X3 No drive in position Y3 RW Track Motion Type A Key Drive Module 1 IRBT 6004 Type A Standard carriage In line

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,504 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 110 mm, overall weight: 20,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D Powerline, number of axes: 7, This 7-axis DMG Gildemeister GMX 400 linear was manufactured in 2004, featuring a maximum turning diameter of 640 mm and a turning length of 1,585 mm. It includes a Sinumerik 840D Powerline control, a milling spindle with a max speed of 12,000 rpm, and a tool magazine with up to 120 positions. If you are looking to get high-quality turn-mill capabilities, consider the DMG Gildemeister GMX 400 linear machine we have for sale. Contact us for more information. Additional equipment Bedpfx Ajx D S Dgoknoln • Oil mist extraction • Coolant tank with belt filter system • Internal coolant system with 80 bar pressure • Approx. 30 tool holders Machine Benefits Technical Machine Benefits • Drive power - main spindle: max. Torque 600 nm • B-axis: +/- 120° • C-axis resolution: 0. 001° and 1° • Maximum turning diameter: 640 mm • Turning length: 1585 mm • Standard turning diameter: 400 mm • Distance between centers of main spindle: max. Bar diameter 90 mm • Chuck diameter: 250 mm (max. 400 mm) • Number of tool positions: 12 positions • Turret tool holder: 40 mm din 69880

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,585 mm, turning diameter: 300 mm, controller model: Siemens 840D Powerline, number of slots in tool magazine: 120, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 1,585 mm Turning diameter: 300 mm Bljdpjy Dqtijfx Aknsn Tool magazine capacity: 120 positions MACHINE DETAILS Control: Siemens 840D Powerline EQUIPMENT Sub spindle C-axis Hollow clamping device (diameter 68 mm) on main spindle, left Measuring device with probe Oil mist separator

Year of construction: 2015, condition: good (used), Used modern Bystronic Xpert 200/3100 200ton x 3metre cnc pressbrake for sale Year/new: 2015 Bledpfx Aksgkgwfjnen Working length: 3100mm / 3metre x 200ton Press force: 2000KN / 200ton Max stroke 215mm Total axis: 7axis – y1,y2,x,x1,r,z1,z2 Hydraulic crowning Hydraulic tool clamping Fully serviced by Bystronic Uk from new One owner from new Low hours in good working condition

Condition: ready for operation (used), Year of construction: 2008, operating hours: 51,226 h, functionality: fully functional, turning length: 1,175 mm, spindle speed (max.): 5,000 rpm, controller model: HEIDENHAIN Plus iT, number of slots in tool magazine: 36, TECHNICAL DETAILS Maximum spindle speed: 5,000 rpm Turning length: 1,175 mm Turning length with tailstock: 1,100 mm Tool holder: HSK 63A according to DIN 69893 Number of tool magazine positions (disc magazine): 36 MACHINE DETAILS Control system: HEIDENHAIN Plus iT with Turn Plus Bodpozqfvvofx Aknoln

Condition: excellent (used), I am offering for sale an original DELO DELO-UNIPRO controller, designed for industrial adhesive dispensing and curing systems. The device is fully functional – it powers on correctly, the display works, and the menu is clear and fully operational (as shown in the pictures). The visual condition is very good, with only minor signs of normal use. Technical specifications: Bodpfx Akszrv Hzjnjln • Manufacturer: DELO • Model: DELO-UNIPRO • Part number: 95 200 01 • Serial number: 1501 UNI 648 • Power supply: 100–240 V AC • Frequency: 50–60 Hz • Power consumption: 40 W • Interfaces: RS232, CAN, USB, Ethernet, Input/Output, Foot Switch, and 4 channels (CH1–CH4) Included in the set: • DELO DELO-UNIPRO controller The item being sold is exactly as shown in the pictures.

Condition: excellent (used), Year of construction: 2014, Viessmann Vitoplex 700kw Year: 2014 Type: SX2A Output:700Kw Viewing only by telephone arrangement! Bedetu T I Uspfx Akneln Preferential sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Condition: good (used), clear span: 2,700 mm, total length: 22,365 mm, load per truss pair (max.): 1,500 kg, shelf height: 2,200 mm, Technical data for the pallet racking system: Racking system: META (Thyssen) Type: Multipal S Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 22,365 mm Number of bays per racking row: 08 units, each 2,700 mm Number of levels including base level: 02 units Technical data for the volume: Pallet spaces per bay: 09 units Number of pallet spaces per row: 72 units Total number of pallet spaces: 72 units Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): approx. 500 kg Included in the scope of supply: 09x Pallet racking uprights, used Material color: Sendzimir galvanized Frame profile: SR85|20 Profile dimensions: 85 x 75 x 2.00 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,200 mm high 1,100 mm deep 32x Pallet racking beams, used Material color: yellow Beam type: HN85|20 Box profile: 85 x 50 mm Connector: 3 hooks Clear width: 2,700 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 64x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 36x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 18x Shims, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground Bljdjzupayepfx Aknsn 01x Load sign with information on bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 2003, turning diameter over cross slide: 390 mm, turning length: 2,250 mm, turning diameter: 610 mm, spindle bore: 118 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 1,870 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 240 mm, Equipment: rotational speed infinitely variable, Siemens Sinumerik 840D control. CNC turning and milling center with main and counter spindle for efficient 4-axis complete machining of chuck, bar, or shaft parts. Blodpow Ngmhofx Aknon

Condition: good (used), clear span: 2,700 mm, total length: 16,760 mm, load capacity: 2,100 kg, shelf height: 3,200 mm, Technical Data for the Pallet Racking System: Racking System: Jung Heinrich Type: Delta Technical Data for Installation: Number of racking rows: 01 pcs. Length per racking row: approx. 16,760 mm Number of bays per row: 06 pcs. at 2,700 mm each Number of levels plus floor level: 02 pcs. Bljdow Nv Etepfx Aknsn Technical Data for Capacity: Pallet spaces per bay: 09 pcs. Pallet spaces per row: 54 pcs. Total pallet spaces: 54 pcs. Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. pallet weight: 700 kg Scope of supply includes: 07x pallet racking uprights, used Colour: blue Profile dimensions: U 80 x 60 x 3.00 mm Incl. horizontal and diagonal bracing, base plates Uprights are pre-assembled (welded steel rack structure) Height: 3,200 mm Depth: 1,050 mm 24x pallet racking beams, used Colour: yellow Box profile: 120 x 50 mm Beam type: HN120|30 Beam connector: 3 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 2,100 kg with evenly distributed load 48x safety pins, used Finish: Sendzimir galvanized For securing longitudinal beams against unintentional lifting 28x anchor bolts, new Manufacturer: Hilti Type: HST2 M12x105/10 Version: Carbon steel, galvanized Approved for: cracked concrete 14x shim plates, used Version: fully galvanized For leveling racking uprights installed on uneven floors 01x load sign With specifications for bay and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for pickup only. Additional transport or shipping of this item is subject to additional costs, which can be requested from us depending on delivery location and scope of delivery.

Year of construction: 2000, condition: used, Punching machine Premium quality HM 35/350 BKE 200/5 Maximum pressure: 35 tons 5 mm sheet thickness at 40 kp/mm² Blodpsg Dgyxofx Aknon

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 4,000 rpm, turning diameter over bed slide: 640 mm, counter spindle torque (max.): 5,000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between headstocks: 1,500 mm SLIDE I X-Axis travel: 550 mm Y-Axis travel: 180 mm Z-Axis travel: 1,185 mm B-Axis: 240° Feed rate X-axis: 0 – 40,000 mm/min Feed rate Y-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 70,000 mm/min Feed rate B-axis: 1 – 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool interface: HSK 63 Milling spindle speed: 10 – 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free pockets: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-Axis travel: 180 mm Z-Axis travel: 1,050 mm Feed rate X-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Driven tool positions: 12 Speed: 1 – 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm SLIDE III Z-Axis travel: 1,150 mm Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 – 4,000 rpm Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty cycle: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 – 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total power requirement: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Footprint: approx. 8.50 x 4.50 x H3.10 m Control Bjdpfewyvc Uex Aknsln Control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG Automation WH10top Main spindle ISM90: Hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: Partial hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-off unit with integrated conveyor belt Automatic safety cover Differential pressure clamping With pump stand for coolant: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece pick-off for turret

Condition: used, Second-hand SKF linear actuator, type CARE 33M20041101000024 / Motorised jointer adjustment suitable for Weinig planers. Bedpfsz Hllmex Aknjln Linear actuators are required, amongst other things, for automatic jointers. Tested and in working order. Technical data: - Stroke: 200 mm - Voltage: 24 V

Condition: excellent (used), Year of construction: 2016, Viessmann Vitocrossal 200 Type:CM2 Year: 2016 Output: 311Kw Мы говорим по русски! Viewing please only by telephone arrangement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. Bsdpetu Truofx Akneln The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), I sell in very good condition TIG welder, L-TEC 200 DC. Price given for 1pc. Bedjud R T Sjpfx Akneln