Used Gmx 200 Linear for sale (18,308)

Condition: excellent (used), For sale, a used KSB ETABLOC-G 32-200/752 centrifugal pump equipped with a 7.5 kW electric motor. The pump has been inspected – it is fully functional and ready for operation. Pump data: Manufacturer: KSB Aktiengesellschaft Model: ETABLOC-G 32-200/752 Fgsdpfx Apszvf Dqsvjh Ident-No.: 48862637 Design: G11 No.: 5-927-123823/1 Flow rate Q: 35 m³/h Head H: 61.5–43 m Pump speed: 2900 rpm Additional designation: Pumpen Distel Type: G32-200/752 No.: 198057/2 Motor data: Manufacturer: KSB Type: QUPS 132S2C-60 Power: 7.5 kW Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Current: 14.7–14 / 8.5–8.1 A Speed: 2880 rpm cos φ: 0.90 Protection class: IP55 Insulation class: F Used pump, in good technical condition. Normal signs of use and storage are visible. The visual condition is accurately shown in the photos. The pump has been inspected, is fully functional, and ready for further use. The item for sale is exactly the one shown in the photos.

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Angle and inclination drive for the sawing station Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Component support for small cross-sections Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Fgsdpszyihuofx Apvsh Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW 2x Vertical chain mortiser 5.5 kW Additional combination support, vertical, for rotary milling cutter Rotary milling head 7.5 kW Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Marking device, rear Marking device, bottom Marking device, front Angled conveyor, right

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, overall weight: 450 kg, total length: 1,600 mm, total width: 1,100 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, We are selling a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Technical data + Power: 7.5 kw + Processing capacity: 20-50 kg per hour Fodpeudvt Rofx Apvjgh + Weight: 450 kg Using liquid nitrogen, the machine is immediately ready for use simply plug it in and get started. It is still in mint condition and can be viewed by appointment. be inspected by appointment. The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you.

Condition: used, Year of construction: 2007, Attachment: Chamber filter press, used Type: Passavant Year of manufacture: 2007 Application: Sludge dewatering Filter plate format: 1500x2000 Number of plates: approx. 58 Filter plates: PP Filter cloths: available as an option, tailored to the medium Filter area: approx. 286 m2 Press volume: approx. 4660 dm3 Filter pressure: approx. 15 bar Total weight: 32,900 kg Application: Sludge treatment, dewatering system. Filter presses are pressure filters that operate in a batch process for the solid-liquid separation of suspensions. Fedszk E H Iopfx Apvogh Purchase or rental: Rental or purchase. Inspection of the equipment can be arranged at our facility.

Condition: excellent (used), Year of construction: 2018, Walter Trowal CF 200 Fjdpfx Apez N Ti Hsvogh Volume: 200 liters Largest component: 180 mm

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Fjdeu H R Iwspfx Apvsgh Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Fedpfoz Ipm Rjx Apvsgh Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 8 Fodpfxehwi U Tj Apvogh

Condition: ready for operation (used), Year of construction: 2003, operating hours: 11,600 h, functionality: fully functional, spindle bore: 107 mm, spindle speed (max.): 4,000 rpm, overall weight: 10,000 kg, controller model: Siemens 810D, Equipment: chip conveyor, TECHNICAL DETAILS Maximum swing diameter: 680 mm Swing diameter over X-guide: 565 mm Longitudinal travel: 1,300 mm Cross travel: 315 mm Spindle head: h5 Spindle diameter at front bearing: 150 mm Spindle bore: 107 mm Maximum torque: 600 Nm Spindle speed: 4,000 rpm Chuck diameter: 315 mm Rapid traverse X-axis: 60 m/min Fgodsz N Aauspfx Apvjh Rapid traverse Z-axis: 45 m/min Tool turret for: 12 tools Driven tools: 12 Tool holder: VDI 40 Quill stroke: 120 mm Quill taper: MK 5 MACHINE DETAILS Control system: Siemens 810D Dimensions & Weight Machine dimensions with chip conveyor (L x W x H): 5,700 x 2,600 x 2,210 mm Machine weight: approx. 10,000 kg Operating Hours Power-on hours: 47,781 h Spindle hours: 11,600 h EQUIPMENT Hydraulic steady rest, clamping range 30-245 mm Chip conveyor KNCS-N 315-91 power chuck

Condition: excellent (used), For sale: KSB ETABLOC G 40-200/1102 G4 centrifugal pump with an 11 kW electric motor. The pump is used, inspected, and in fully working condition. It was checked before being listed for sale. The visual condition corresponds to the photos – normal signs of use and storage are visible. Pump specifications: Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 40-200/1102 G4 Flow rate Q: 20–60 m³/h Head H: 57–35 m Rotational speed: 2900 rpm Serial No.: 5-118-547 043/1 Motor specifications: Manufacturer: KSB / Klein, Schanzlin & Becker AG Motor type: ZKA 160 MK2 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2880 rpm cos φ: 0.9 Serial No.: 0-118-886321 Ident-No.: 00533537 Fgjdpfx Ajzvymgopveh Motor No.: 544077 Condition: used – inspected – 100% functional. This is the exact unit shown in the photos that is being sold.

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Fjdpfxox A Hfvs Apvsgh Max feed speed: 40 m/min

Condition: excellent (used), For sale is an industrial KSB ETABLOC-GN 50-200/1502.21 centrifugal pump, equipped with a 15 kW KSB electric motor. Fjdpfx Ajzvzu Eopvjgh The pump is designed for industrial applications, technological installations, water circulation systems, and other suitable media. Pump technical data: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 50-200/1502.21 Identification number: 48861841 Flow rate Q: 12–100 m³/h Head H: 55–34.5 m Rotational speed: 2900 rpm Connections: flanged Motor data: Manufacturer: KSB Type: QUPA 160 M2B-6 Power: 15 kW / 50 Hz Voltage: 380–660–420 V Current: 27.8–16.1–25.2 A cos φ: 0.93 Protection class: IP55 Insulation class: F Motor weight: approx. 87 kg Condition: used, with normal signs of use and storage visible in the photos. A complete set consisting of the pump and electric motor is being sold, exactly as shown in the photos.

Condition: excellent (used), For sale is a Pumpen Distel type 50/200 centrifugal pump equipped with an 11 kW electric motor from Antriebstechnik G. Bauknecht AG. The pump is used and in working order. Visually, it is in good used condition and has normal signs of use and storage. The actual condition and completeness are shown in the photos. Technical data of the pump: Manufacturer: Pumpen Distel Type: 50/200 Serial No.: 78756 Flow rate Q: 40 m³/h Pressure: 4.5 bar Rotational speed: 2900 rpm Power: 11 kW Connections: flanged Technical data of the electric motor: Manufacturer: Antriebstechnik G. Bauknecht AG Type: RF 11/2-75 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2930 rpm cos φ: 0.88 Fjdezvyw Eopfx Apvjgh Protection class: IP54 Insulation class: B Operating mode: S1 Mounting form: B3/B5 Condition: Used, in working order. Has normal signs of use and storage. Scope of sale: Complete centrifugal pump with an 11 kW electric motor – exactly as shown in the photos.

Condition: excellent (used), For sale: KSB ETABLOC G 32-200/752 centrifugal pump with electric motor. The pump has been inspected and is in fully working condition. It features a robust industrial design from the renowned manufacturer KSB, and is suitable for water, circulation, and various industrial applications. Fgodpfx Aozvzvijpvsh Technical data: Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 32-200/752 No.: 0-118-902 133 Flow rate Q: 10–37 m³/h Head H: 57–34 m Rotational speed: 2950 rpm Motor power: 7.5 kW Voltage: 380 V Current: 14.2 A cos φ: 0.91 Frequency: 50 Hz Protection class: IP54 Insulation class: B Motor: three-phase Motor type: ZKA 132 S-2 Connections: flanged Condition: used, inspected, and in fully working condition. It has normal signs of use and storage, as visible in the photos. The item for sale is a complete KSB pump with an electric motor, exactly as shown in the photos.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02260002571, The Gildemeister CTX 420 Linear is a powerful and highly precise CNC universal lathe (or turning-milling center) designed for demanding series and mass production. It is primarily characterized by its linear motor technology in the X-axis, which, compared to conventional ball screws, ensures extremely high dynamics, rapid positioning, and wear-free operation. Equipment: -Single spindle, three-jaw chuck, 11-position tool turret, automatic tailstock, chip conveyor Control system: -Heidenhain Accessories: -Workbench, under-mounted telescopic drawer unit (7 drawers) Fgodpjz N Etkefx Apvjh Contents: Hand tools, analog and digital measuring instruments, indexable cutting inserts.

Condition: excellent (used), Year of construction: 1966, Exner 200 Pressure: 200 t Stroke: 180 mm Table length: 690 mm Table width: 530 mm Distance between columns: 420 mm Fsdpfx Apez N Tf Uovegh Hydraulic four-column press for embossing, upsetting, flow forming, calibrating, and punching Type H4SP 200 S 1101-3 Year of manufacture: 1966 _____ Downward pressure capacity: approx. 200 tons Upward retraction force: approx. 20 tons Usable table size: 420 x 220 mm Total table size: 700 x 530 mm Distance between columns at the front: 420 mm Laterally: 220 mm Installation height, table to ram (top): 380 mm Ram stroke: approx. 200 mm Piston / column diameter: 270/120 mm Piston bore: 50 mm Closing speed of the ram: - Rapid traverse / working stroke / ram at 330/10/180 mm/s Total power consumption: approx. 15 kW - 380 V - 50 Hz Weight: approx. 3,000 kg Machine dimensions: approx. 1.4 x 1.3 x approx. 2.75 m Accessories / special equipment: Sick light curtain

Condition: used, Year of construction: 2017, Dimensions (L/W/H) 2.645 x 900 x 2.130 mm Filter capacity 14,5 m² Number of dust containers 3 St. Fgodpfx Apsz I Uc Djvoh Weight ca. 500 kg 200 mm

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 630 mm, workpiece width (max.): 630 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Fodpfx Apez Dp Dbovogh Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a leak testing device from the brand JW Froehlich in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: JW Froehlich • Model: MPS-200 • Testing method: Relative pressure measurement. Optional measurement methods: pressure drop, pressure increase, overpressure, underpressure. • Testing pressure range: approx. -0.8 to 6 bar • 6.5" color monitor with touchscreen and Windows operating system • Year of manufacture: 2014 • Documentation: Leak testing seminar • Condition: Used, functional Shipping costs via freight forwarder: approx. €90 If interested, a leak calibrator LK-20 is also available! International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from the location 42855 Remscheid, free on board. Fgodpfx Apjz I Db Ajvsh Errors in technical data and prior sale are reserved.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Complete line as shown on photos. Excellent condition. Force 200 t Table 1800 x 1000 mm Number of cycles per 1 min Machine dimensions 2700 x 2000 x 4400 mm Fgodpfx Ajz D Tdfepvsh Machine weight 28000 kg

Condition: ready for operation (used), SM 32/200 sliding module, 200 mm stroke, pneumatic linear actuator, used, minor signs of wear, 100% functional, delivery as per photos. Fsdpfx Apjz Acz Hovjgh

Condition: excellent (used), Year of construction: 2018, operating hours: 100 h, functionality: fully functional, rotational speed (min.): 1,490 rpm, input voltage: 400 V, input frequency: 50 Hz, 200 kW electric motor Fjdpfen Tntqox Apvegh IE4 efficiency class Year of manufacture: 2024 6-month warranty 400 V 1490 rpm 315 l

Condition: used, Year of construction: 2014, Suitable for automatic grinding of the tooth face and tooth back of carbide-tipped circular saw blades. Technical Data: Circular saw blade diameter 80 - 650 mm, circular saw blade bore diameter from 10 mm, blade thickness up to 5 mm, tooth pitch 6 - 100 mm, rake angle -10° to +30°, clearance angle 5° to 25°, tooth height difference arbitrary, bevel grinding on the tooth back up to 45°, bevel grinding on the tooth face up to 15°, grinding wheel diameter 125 mm, grinding wheel bore diameter 32 mm, connected load 400 V / 50 Hz, weight approx. 850 kg, dimensions W x D x H = 1502 x 960 x 1900 mm, colour grey RAL 7045 / grey RAL 7047. Suitable for automatic grinding of the tooth face and tooth back of carbide-tipped circular saw blades. Fgsdpfxez Nw H Ae Apvoh

Condition: used, Year of construction: 2014, Suitable for automatic grinding of the tooth face and tooth back of carbide-tipped circular saw blades. Technical Data: Fgodpfxoz Nw Hvs Apvjh Circular saw blade diameter 80 - 650 mm, circular saw blade bore diameter from 10 mm, blade thickness up to 5 mm, tooth pitch 6 - 100 mm, rake angle -10° to +30°, clearance angle 5° to 25°, tooth height difference arbitrary, bevel grinding on the tooth back up to 45°, bevel grinding on the tooth face up to 15°, grinding wheel diameter 125 mm, grinding wheel bore diameter 32 mm, connected load 400 V / 50 Hz, weight approx. 850 kg, dimensions W x D x H = 1502 x 960 x 1900 mm, colour grey RAL 7045 / grey RAL 7047. Suitable for automatic grinding of the tooth face and tooth back of carbide-tipped circular saw blades.

Condition: good (used), A good used linear weigher with Digiway controls - this machine is a single head weigher with 4 vibratory feed trays - loadcell technology and Digiway controls for fast accurate weighing and filling or granular free flowing products. Fedpeu U Ai Hefx Apvogh