Used Gmx 200 Linear for sale (17,987)

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 11790001067, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 40 kVA, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, total height: 2,600 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 6,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 24, tool diameter: 40 mm, DMG SAUER ULTRASONIC HSC LINEAR 20 HSC Machining Center - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 100 A - Connection: 40 kVA - Input unit X/Y/Z axis: 0.001 mm - Travel measuring system resolution X/Y/Z axis: 0.001 mm Pedpfxoyxckve Agkjpu - Position tolerance in X/Y/Z axis with direct measuring system: 0.005 mm - Tool holder: HSK-32 E - Max. tool length from spindle nose: 200 mm - Max. tool weight for automatic tool change: 1 kg, total tool weight in magazine: 24 kg - NC rotary table with swivel axis - C-axis clamping surface: 190 mm diameter - Swivel range: 360° - Rotary table speed: 150 rpm - A-axis swivel range: -5/+130° - Loading capacity: max. 10 kg - Including the tool holders shown in the photos in the tool magazine - Also includes an additional external tool changer system (30-position) from manufacturer ROBOWORKER, type: LM 100 Note: The machine can be transported on a standard truck! Note: This item is available immediately! FCA D-73235 Weilheim Teck – loaded onto truck

Condition: excellent (used), ALKO 200 clean air extraction unit with frequency converter – used Air filtration using filter hoses, Pneumatic cleaning system, Dust-tested, Movable collection container, Frequency converter, Pressure transmitter for demand-based control ----- Technical Data ----- Extraction nozzle diameter: 200 mm, Nominal volume flow: 2,261 m³/h, Max. negative pressure: 2,446 Pa, Number of filter bags: 2, Motor: 4 kW, Compressed air connection: Max. 8.5 bar, Dimensions (L x W x H): 2,280 x 1,010 x 2,050 mm, Weight: 470 kg Quality information: - Complete basic inspection - Complete basic cleaning Ppedpfxszg A N Ej Agkeu - Pneumatic system checked - Ready for immediate use

Condition: ready for operation (used), Year of construction: 2012, operating hours: 14,597 h, travel distance X-axis: 195 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: Smart, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2012. This Mazak Quick Turn Smart 200 features a 12-position turret and is equipped with a Hainbuch chuck, enhancing its versatility. It has a bar capacity of 65 mm, making it suitable for various turning applications. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 200 machine we have for sale. Contact us for further details. • Supply Voltage: 3 Phase, 400 V, 50 Hz Podpfx Aszhbqkjgkjpu • Control Circuit Voltage: AC100 V / DC24 V • Main Breaker Interrupting Capacity: 20 kA • Supply Voltage (Ue): 400 V, 3~ • Rated Current (Ie): 3.5 A • Frequency: 50 Hz • Weight Barfeeder: 500 kg • Breaking Capacity (Icn): 5 kA • Control: Mazatrol Smart • Turret: 12-Position • Bar Capacity: 65 mm • Hainbuch Chuck (Standard Chuck Also Included) • Optional, not included: IEMCA KID 80 Bar Feeder (2012) Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2008, Cutting height at 90°: 200 mm Cutting length: 410 mm Ppodpfx Asy S Rrbjgkju Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Machine length: Machine width: Weight: 300 kg

Condition: used, Year of construction: 2000, Cutting height at 90°: 200 mm Ppjdpfx Agsy S Rq Rskou Cutting length: 410 mm Horizontal miter range: 45° - 90° - 25° Vertical miter range: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Feed brake: yes Machine length: Machine width: Weight: 300 kg

Condition: new, Year of construction: 2025, Suction nozzle diameter: 200 mm Maximum flow rate: 3200 m³/h Nominal flow rate: 2262 m³/h Flow rate monitoring: Pressure differential indicator Valve pressure: 2250 pa Filter area: 16 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 65 dB Chip bag volume: 320 l Ppjdpfx Ajv Sq Ttegkou Filter cleaning: pneumatic, jet cleaning Motor power: 4 kW Machine length: 2340 mm Machine width: 880 mm Machine height: 2190 mm Weight: 385 kg

Condition: new, Year of construction: 2025, Suction nozzle diameter: 200 mm Maximum volumetric flow: 3200 m³/h Rated volumetric flow: 2262 m³/h Volumetric flow monitoring: differential pressure indicator Negative pressure: 2250 Pa Filter area: 16 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 65 dB Chip collection bag volume: 320 l Filter cleaning: motorized Motor power: 4 kW Machine length: 2340 mm Machine width: 880 mm Machine height: 2190 mm Pedpfx Agjk Utq Iskopu Weight: 385 kg

Condition: new, Year of construction: 2024, Cutting height at 90°: 200 mm Cutting length: 410 mm Horizontal mitre angle range: 45° - 90° - 25° Vertical mitre angle range: 60° - 90° - 30° Infeed roller table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Machine length: Ppsdpfx Ageiuld Ssksu Machine width: Weight: 300 kg

Condition: new, Year of construction: 2025, Belt width: 200 mm Belt length: 3000 mm Table size: 960 mm x 352 mm Auxiliary table: 330 mm x 330 mm Veneer sanding attachment: yes Oscillation: yes Sanding unit can be swivelled: yes Dust extraction port: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 900 mm Ppodpfx Ashy Iyvegkju Weight: 310 kg

Condition: excellent (used), AdBlue Refueling Vehicle Type: HT-Mobilus 200 AdBlue Whether in the automotive industry or directly in vehicle workshops: the MOBILUS AdBlue system allows for safe and economically efficient refueling of your vehicles. The mobile refueling system MOBILUS AdBlue complies with all relevant technical and legal regulations and is therefore also used in research and development projects. Convince yourself of the quality of this mobile urea refueling unit. Technical data: Manufacturer: Rietbergwerke GmbH & Co. KG Type: HT-Mobilus 200 AdBlue Year of manufacture: 2018 Technical data: Dimensions L x W x H: 142 x 73 x 135 cm Empty weight: approx. 260 kg Usable volume of the tank: approx. 175 liters Power supply: Connected load: 3.0 kW Connection voltage: 400/230 V / 50 Hz NPE Fuse rating: 16 A Heater: Connected load: 4.0 kW Connection voltage: 400 V Delivery pump: Power: 0.75 kW Supply voltage: 400 V / 50 Hz Additional technical data: Suction and circulation pump: Power: 0.4 kW Supply voltage: 230 V / 50 Hz Dispensing valve: Flow rate: max. 40 l/min Operating pressure: 0.5 – 3.5 bar Control range: Flow rate: 3.5 l/min. – 45.0 l/min Temperature: 15 °C – 45 °C Frequency converter: 1,800 1/min BNC sockets: Output: 0 – 10 V Temperatures: Operating temperature: max. 45 °C Storage temperature: up to -30 °C Materials: Tank: LDPE all other parts in contact with the product: LDPE or stainless steel Transport trolley: Steel, powder-coated Seals / hoses: EPDM Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Ppodpfjzgcl Hjx Agkeu We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification: Heating jacket VT 6025 Temperature (metric): 200 °C Internal dimensions (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Podpfx Aezgbq Iogkjpu Frequency: 50/60 Hz Capacity (metric): 25 l Heating jacket type: without inert gas connection Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification: Heating jacket VT 6025 Temperature (metric): 200 °C Internal dimensions (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Frequency: 50/60 Hz Capacity (metric): 25 l Heating jacket type: without inert gas connection Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Ppodpfezgbqzex Agkou Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Here we offer a temperature test chamber. Ppodpfx Aezgah Sogkeu Feutron Temperature Test Chamber, Air-Cooled Test chamber nominal volume: 280 liters Dimensions: External dimensions of the test chamber: Width 1540 mm x Height 2090 mm x Depth 1240 mm Fan motor and door removed: Width 1540 mm x Height 1940 mm x Depth 925 mm Test chamber: Width 720 mm x Height 690 mm x Depth 560 mm Door, clear opening: Width 720 mm x Height 690 mm Viewing window, heated: Width 500 mm x Height 600 mm Installation dimensions of the temperature test chamber with doors open Width 2340 mm x Height 2090 mm x Depth 2165 mm Feed-through opening, 2 pieces on the side wall, left: Ø 100 mm Temperature range -70°C to +180°C Heating: 3.0 K / min Cooling: 3.0 K / min Mains connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerant: R507 / R23 For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Motor: 400 V / 5.0 kW Speed: 2800 rpm Cutting length: 420 mm Cutting width: 420 mm at 90° 295 mm at 45° Cutting height: 200 mm at 90° 140 mm at 45° The saw can be tilted to an acute angle of approximately 25° on one side and tilted flat to the left up to 30°. Ppodpfx Agskwhmfokeu Saw blade diameter: 520 mm x 50 mm Dust extraction port diameter: 100 mm Weight: 250 kg With the following optional equipment: - Carbide-tipped circular saw blade 520x4.0/2.8 x 50, 60 teeth, for wood - Machine can be tilted on both sides from the front using a hand crank Availability: short notice / 2022 Location: Solingen

Condition: ready for operation (used), Year of construction: 2007, operating hours: 8,794 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, overall weight: 4,380 kg, controller manufacturer: MAZATROL, controller model: Matrix NEXUS, number of axes: 2, Horizontal turning machine manufactured in 2007. This Mazak QUICK TURN NEXUS 200-II features a maximum turning diameter of Ø 350 mm and a turning length of 550 mm. It is equipped with a chuck size of 200 mm and a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QUICK TURN NEXUS 200-II machine we have for sale. Contact us for further details. • Control: Mazatrol Matrix NEXUS Psdpfx Agezg Dz Aokopu • Chuck Size: 200 mm (8") • Maximum Turning Diameter: Ø 350 mm • Maximum Turning Length: 550 mm • Machine Weight: 4,380 kg • Tool Eye (Tool Setter): Yes • Coolant System: Currently not functional (coolant/water cannot be added) • Additional optional Accessories: Chip Conveyor, various clamping jaws included • Machine On Hours: 24,079 h • Spindle Hours: 8,794 h Technical Specification Counter Spindle Yes Driven Tools No

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Podpozf Ibksfx Agkepu Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: excellent (used), CTS TS-70/200-5/S Temperature Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/200-5/S Machine Type: Temperature Testing Chamber / Stress-Screening Testing Chamber Test Chamber Volume: approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical Data Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 8 K/min Temperature Change Rate (Cooling): approx. 6 K/min Max. Heat Radiation at +20 °C: approx. 3500 W Test Chamber Dimensions (approx.): 650 x 400 x 750 mm (W x D x H) Housing Dimensions (approx.): 920 x 1345 x 1800 mm (W x D x H) Weight (approx.): 550 kg Power Connection: 400 V 3/N / 50 Hz Power Consumption: 10.9 kW Rated Current: 15.7 A Protection Class: IP22 Refrigerant, Pre-cooling Stage: R404A Refrigerant Quantity, Pre-cooling Stage: 2.5 kg Psdpfozf Hi Hox Agkspu Refrigerant, Cooling Stage: R23 Refrigerant Quantity, Cooling Stage: 0.6 kg / 15 bar Operating Pressure PS: 25 bar Test Pressure PT: 20 bar Equipment Touch panel operation Viewing window in the door Stainless steel interior Test chamber lighting Side openings as shown in the pictures Shelves / test chamber equipment as shown in the pictures Over-temperature test specimen protection Eurotherm safety controller RS232 interface Documentation / documents as shown in the pictures Areas of Application Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Delivery 1x CTS TS-70/200-5/S Temperature Testing Chamber Shelves / test chamber equipment Existing documentation / documents Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: good (used), Year of construction: 2002, Control: FANUC 18i-T Turning diameter: 32 mm Turning length: 120 mm Max. main spindle speed: 8,000 rpm Max. counter spindle speed: 8,000 rpm SLIDE 1 X-axis travel 1: 65 mm Y-axis travel 1: 350 mm Tool positions 6 / 4 Ppodozgdk Dspfx Agkou Fixed stations 6 Driven stations 4 SLIDE 2 X-axis travel 2: 265 mm Z-axis travel 2: 320 mm Tool positions 2 / 3 Fixed stations 2 Driven stations 3 SLIDE Y2 Tool positions 3 / 2 / 2 External machining 3 Internal machining 2 Driven stations 2 Weight: 4,500 kg Bar loader: IEMCA BOSS

Condition: good (used), Year of construction: 1997, Ref. -No.: 10620 Manufacturer: SKODA Type: W 200 T Year of construction: 1997 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany X-Travel: 16000 mm Y-Travel: 5150 mm Z-Travel: 1600 mm W-Axis: 2100 mm V-axis: 2000 mm B-Axis: 0 - 360 ° Spindle Diameter: 200 mm Table Load: 80.000 kg Tool Taper: SK 60 / SK 50 Turning Speeds: 1000 RPM Rotary table diameter: 3500 x 3000 mm Ppedpfoyagidjx Agkeu Further information: Including angle head Machine can be inspected under power.

Condition: new, ZEATZ PHL Linear Rotary Tables – Rotary and Linear Tables for Workpieces up to 80 tons The ZEATZ PHL linear series combines highly precise rotary table technology with an integrated linear axis, offering maximum flexibility for complex machining tasks. Ideal for positioning, simultaneous rotation, and interpolation machining for large and heavy workpieces. Your advantages at a glance: ✔ Combination of rotary table and linear axis in a single unit ✔ Integration into existing machines (controls: HEIDENHAIN / SIEMENS / FANUC) ✔ Original spare parts available directly from stock Podjm Tv Azspfx Agkjpu ✔ Technical support and on-site service in Germany ✔ Financing and lease-to-own options available upon request ✔ 24-month warranty Why ZEATZ: ZEATZ stands for highly precise NC rotary tables and innovative solutions for demanding machining processes. Thanks to their robust design, backlash-free drive systems, and state-of-the-art control technology, the systems are ideally suited for heavy machining and the highest accuracy requirements. Technical features: Applications: Positioning | Simultaneous rotation | Interpolation machining Table sizes: 1,000 x 1,000 mm 1,200 x 1,200 mm 1,500 x 1,500 mm 1,800 x 1,800 mm 2,000 x 2,000 mm 2,500 x 2,500 mm 3,000 x 3,000 mm 3,500 x 3,500 mm 4,000 x 4,000 mm (round clamping surfaces also possible) Max. workpiece weight: approx. 6,000 to 80,000 kg Linear axis: Optionally integrated linear axis Travel: approx. 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ± 5 arc seconds Integration: Compatible with HEIDENHAIN, SIEMENS, and FANUC controls Your advantages as a JMT customer: ✔ Official sales partner for ZEATZ in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Support for integration and commissioning ✔ Reference projects available in Germany Contact us – we will be happy to advise you and create a customized offer.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 230 V, DGUV certified until: 08/2028, total width: 420 mm, total length: 530 mm, total height: 800 mm, empty load weight: 110 kg, input frequency: 50 Hz, overall weight: 110 kg, electrical fuse: 10 A, power: 1 kW (1.36 HP), NEW NEW +++ Planetary Mixer +++ NEW NEW Sinmag Model: SM 200 Proven technology… already tested extensively! Simple manual operation Mixer with 3 gear speeds 1 stainless steel bowl, 20 liters 1 flat beater, 1 dough hook, 1 whisk Bowl safety guard / protection against accidental contact Floor-standing mixer with bowl lift Only available from us, DGUV V3 certified Dimensions W x D x H in mm: 420 x 530 x 800/1116 Weight: 110 kg Connection: 220V NEW machine, SAB certified 24 months warranty + spare parts service Top quality and price in one machine! Your partner with added service! Options: Pedpfevdktkjx Agkepu Delivery service Leasing & rental service Additional bowls & whisks 10 liters Maintenance contract Base frame Here you will find a wide selection of planetary mixers!

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Deckel Maho DMU 50 evo Linear with TNC 530 control from Heidenhain, in TOP condition Technical data: >> Year of manufacture 2006 >> Manufacturer: Heidenhain, type iTNC 530 >> Travels X500/Y450/Z400 >> C-axis 360 degrees >> B-axis 0 degrees to 161.955 degrees >> Tool holder HSK A63 >> Max. spindle speed up to 18000 rpm >> Feed rate continuously programmable up to X, Y, Z 20000 mm/min >> C-B axis continuously programmable up to rapid traverse speed >> Rapid traverse Y- and Z-axis 50 m/min >> X-axis 80 m/min (linear drive) >> B-axis 40 rpm >> C-axis 50 rpm >> Tool magazine: Double gripper, 60 magazine slots >> Table clamping surface Ø 500 x 380 mm >> T-slot spacing 63/14H7 >> Table load 200 kg >> Dimensions and weight: approx. >> Machine without control and attachments >> Depth 3.0 meters, width 2.4 meters, height 2.6 meters >> Weight approx. 7000 kg >> Operating voltage 400 V >> Electric handwheel Heidenhain HR 410 >> Power connection 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extractor >> IKZ 40 Bar >> Coolant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Compressed air supply to the measuring system >> Preparation for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set Ppsdpfx Agszg Dnvekeu >> Kinematics >> Blum laser for tool measurement and breakage detection >> Complete documentation The following work has been carried out: >> Main spindle overhauled >> Complete maintenance: All coolant hoses and pneumatic hoses renewed, filters new, fluids and belts renewed. Scrapers, etc. Complete cleaning. >> Geometrically measured (acceptance report) About the machine: Offered is a Deckel Maho DMU 50 evo Linear machining center with a TNC 530 3D path control from Heidenhain. The machine is in very good condition. The main spindle has been overhauled (replacement spindle) on the DMU, completely serviced, and an acceptance report has been created. Invoices for the overhaul of 42,000 Euros (net) are available. Take the opportunity to inspect and test the machine on site while it is powered up.

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Machine will be completely overhauled Equipment and technical data: Table size: 1100 x 880 mm Pole-changeable drive motor: 5/6 kW Spindle speeds: 3000/4500/6000/9000 rpm Manual height adjustment: via handwheel Manual tilt adjustment: via handwheel Podswka Sbjpfx Agkepu Height adjustment of milling spindle: 110 mm Tilt adjustment of milling spindle: -5° to 45°; double-sided bearing Reversing switch for clockwise and counterclockwise rotation With 3-roller power feed unit Images show the machine in non-overhauled condition. Sale does not include Aigner table extensions visible in the images. Availability: by arrangement Location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Technical data Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Suction nozzle 2 x Ø 120mm Infinitely variable speed control 150010000 rpm Motor power 7.5 kW (10 HP) Net weight approx. 880kg Technical description 7" touch control, can be used optionally, top and bottom 7" capacitive touchscreen, can also be operated with gloves can also be operated with gloves (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling cutter zero point selectable in the program, 3 reference points Simple menu structure thanks to innovative touch control (max. 2 levels) Display (work screen) for tool and program number program number, height, angle, speed and milling fence Operating hours counter Warning messages in the event of incorrect operation Remote maintenance via Internet (VPN tunnel) USB interface for data backup and importing Tool, program and user Tool database for 5 tools (20 programs possible per tool) 20 programs are possible per tool) Heavy-duty bench router with double-sided swivel-mounted, fixed built-in milling spindle for swivel range of +/- 45.5° 2-axis positioning control for height and tilt adjustment swivel adjustment Electronic position and speed displays Infinitely variable speed control 1500 10000 rpm 7.5 kW motor with 11 KW frequency converter Push button with electronic soft start Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Podpfxex N Dhdj Agkepu Milling fence 301 Overall adjustment via 1 handwheel on the right-hand side, Adjustment range approx. 140 mm, dimension display, Total stop via touchscreen +/-0.1 mm, Partial stop adjustment, (chip removal) +5mm to -25mm is carried out via a star knob screw on the left side side, dimension display via one mm vernier, clamping on the machine table the machine table manually via clamping clamping screws, milling fence made of die-cast aluminum with 2 milled cast iron stop slats 500mm long with aluminum splitter tongues, maximum possible tool diameter is tool diameter is 250 mm Machine socket Lockable main switch Electronic, wear-free motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30mm with quick-release nut CE-compliant incl. - Milling fence type 301 - Cast stop plates and aluminum splitter tongues - Milling protection and pressure device GAMMA V 1629 Table pusher for table top 1100 x 760 mm Coated surfaces, for quick, convenient and tool-free tool-free adjustment to different tool diameters tool diameters up to max. 240 mm, the table insert Table insert with quick lock up to tool diameter 155 mm instead of standard table insert rings (not in conjunction connection with rotary table) - Zeromaster reference measurement setting device for exact 0-point height adjustment from the milling tool to the table top for 24 V DC - HSK-80 quick-change arbor system with spindle lock and spindle lock and milling arbor 30mm instead of milling spindle 30mm (higher concentricity and no sticking in the spindle as with the spindle as with the MK 5 system or steep taper) - Console to the

Condition: used, Used machine Podpfx Asxfc R Hogkjpu Condition: like new Equipment and technical data to follow