Used Seller for sale (1,360)

Condition: new, empty load weight: 700 kg, maximum load weight: 600 kg, overall weight: 1,300 kg, loading space length: 3,000 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 165r13c, Sturdy and high-quality sales trailer for snacks or goods. Our* snack bar trailers* from the *SELLER* range are manufactured with an insulated sandwich body. The extremely stable steel frame is welded and hot-dip galvanized, which ensures high stability. The *sales flap* and *entry door* have a welded frame so that the *sales case* remains permanently stable. A lockable personal lock in steel and *not in plastic* is built into the door. The *case body* made of 30 mm sheet steel sandwich has a galvanized outer skin which is also powder-coated. The insulation is made of a foamed PUR core. The *car trailer* is silver-grey on the outside and white on the inside. Four crank supports jack up the *snack van*. An inexpensive *car trailer* for *markets*, *snack bars*, *cocktails*, *fast food*, *non-food*, *street food*, *sales goods* and much more. Our standard equipment of the sales trailer at a glance: Gslhopgi Nzecdw Deuk *entry door lockable with personal lock*, *step on drawbar*, *sales flap on the right* with lifting aids lockable from the inside, stable *crank supports*, *sandwich body* 30mm outside in silver inside white, manoeuvring handles, jockey wheel with holder, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. Further technical details can be found below. As accessories for our *sales trolleys* we offer further *flaps*, *tarpaulins*, *electrical equipment*, *bag racks*, sales counters, cupboards, sinks, *PVC floor covering*, *100km/h shock absorbers* and *trailer lock*.

Condition: new, empty load weight: 620 kg, maximum load weight: 680 kg, overall weight: 1,300 kg, loading space length: 2,500 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 165r13c, Sturdy sales trailer for snacks or goods. Our* snack bar trailers* from the *SELLER* range are manufactured in an insulated sandwich construction. The extremely stable frame is welded and hot-dip galvanized, which ensures basic stability. The *sales flap* and *door* have a welded frame so that the *sales case* is permanently stable. A personal lock in steel and *not in plastic* is installed in the door. The 30 mm sandwich *case body* has a galvanized sheet steel skin which is also powder-coated. The insulation is made of a PUR foam core. The *car trailer* is silver-grey on the outside and white on the inside. The food truck is supported by 4 crankable supports. All together an inexpensive *car trailer* for *markets*, *snack bars*, *cocktails*, *fast food*, *non-food*, *street food*, *sales goods* and much more. Our standard equipment of the sales trailer at a glance: *entry door with personal lock lockable*, *step on drawbar*, *sales flap on the right* with lifting aids lockable from the inside, stable *crank supports*, *sandwich body* 30mm outside in silver inside white, manoeuvring handles, jockey wheel with holder, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. Guolspfc Dzohcdw Djk Further technical details can be found below. As accessories for our *sales trolleys* we offer further *flaps*, *tarpaulins*, *electrical equipment*, *bag racks*, sales counters, cupboards, sinks, *PVC floor covering*, *100km/h shock absorbers* and *trailer lock*.

Condition: new, empty load weight: 560 kg, maximum load weight: 440 kg, overall weight: 1,000 kg, loading space length: 2,000 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 155r13c, Highly visible sales trailer for snacks or goods. Our* snack trailers* are manufactured in an insulated sandwich construction. A very stable frame, welded and hot-dip galvanized, provides the basic stability. Gelhcdwopfcpfs Douk The flaps and doors have a welded frame so that the sales box is permanently stable. A proper personal lock in steel and *not in plastic* is installed in the door. The 30 mm sandwich case body has a galvanized sheet steel outer skin which is also powder-coated. The insulation is a PUR foam core. The *car trailer* is silver-grey on the outside and white on the inside. The *snack van* is supported by 4 crank supports. All together an inexpensive *car trailer* for *markets*, *snack bars*, *food*, *beverages*, *fast food*, *low food*, *non-food,* * *street food*, *sales goods* and much more. The standard equipment of the sales trailer at a glance: *entry door lockable with personal lock*, *step on drawbar*, *sales flap on the right* with lifting aids lockable from the inside, four stable *crank supports*, *sandwich body* 30mm outside in silver inside white, manoeuvring handles, jockey wheel, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. Further technical details can be found below. As accessories for our *sales trolleys* we offer further *sales flaps*, *tarp triangles*, *electrical equipment*, *bag racks*, sales counters, cupboards, sinks, PVC on floor, *100km/h shock absorber* and *anti-theft device*.

Condition: new, empty load weight: 870 kg, maximum load weight: 930 kg, overall weight: 1,800 kg, axle configuration: 1 axle, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, loading space volume: 18 m³, tire size: 165r13c, Sturdy, high-quality sales trailers for snacks or goods. The SELLER snack trailers are manufactured with an insulated sandwich body. The extremely stable steel frame is welded and hot-dip galvanized for high stability. The flap and entrance door have a welded frame so that the sales box remains permanently stable. A lockable personal lock made of steel and not plastic is installed in the door. The 30 mm sandwich body has a galvanized outer skin which is powder-coated. The insulation is a foamed PUR core. The car trailer is silver-grey on the outside and white on the inside. Four crankable supports provide stable support for the snack trailer. An inexpensive car trailer for the market, snack bar, non-food, street food, cocktails, fast food and other goods for sale. Financing: possible WITHOUT down payment!!! You can find other sizes, equipment and other affordable models in our store: ----- You can also find all our low-cost offers on our homepage Germany-wide delivery (except islands) possible! for the prices. ----- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Golhcod U Itwjdw Deuk Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Condition: new, Year of construction: 2025, DON'T WAIT ANY MORE AND ORDER YOUR MACHINE We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during the guarantee period and afterwards. Promised. Golhcecka Suodw Dsuk Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. We know all our devices inside and out. For years. And as a manufacturer, we are always up to date. We look forward to you. Bending machine 3.14m/0.8mm Technical specifications: - maximum working width: 3140 mm - Bending capacity: up to 0.8 mm (steel sheet) - Bending angle: max 145 degrees - Bending beam thickness: 24 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Passage opening: 80 mm - degree scale - angle stop - Front and depth stops - Weight: about 400 kg - The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) plus 350 euros - The machine complies with CE guidelines and has a 12-month guarantee. Price: €2050.00 The delivery costs are: €330.00 Cash on delivery Delivery within 4 days from order date We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery

Condition: new, Year of construction: 2025, The best-selling and reliable PROD-MASZ press brake! Fast delivery time and high quality! Bending machine from the only, genuine and reliable manufacturer PROD MASZ® Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 0.8 mm (steel sheet) - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 mm - lifting of the upper beam in three positions - Upper beam stroke: 80 mm degree scale angle stop rear rack for holding the sheet metal front depth stops - Weight: about 180 kg The roller scissors (max. cutting capacity 0.8 mm / steel) The machine complies with CE guidelines and has a 12-month guarantee. Price: € 1.050.00 Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros Delivery date: every week We are looking forward to your contact! Geleb Eg Hyjhcdw Douk Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2025, We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during and after the guarantee. Promised. Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. Gujlhscddnfocdw Dsk We know all of our devices inside and out. For years. And as a manufacturer, we are always up to date. We look forward to you. direct from the manufacturer Working length: 2140 mm CE Max sheet thickness: 0.8 mm (steel) titanium-zinc sheet 0.8 mm, aluminum sheet 1.2 mm, copper sheet 1.25 mm Bending angle 145 degrees (at the customer's request up to 165 degrees) Cutting along the entire working length Lift the upper cheek in three positions maximum clear width between the side panels 80 mm rear frame for holding sheet metal Front cutting limiter to ensure the specified cutting width We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery)

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Are you looking for quality and expertise for your sheet metal processing machine? Then we are the right partner at your side. Folding bench ZGR-2000T/0.8 incl. transport rollers Maximum working length of press brake: 2140 mm Bending performance: up to 0.8 mm (steel sheet) Titanium Zinc Sheet: 0.8mm Aluminum Sheet: 1.2mm Copper Sheet: 1.25mm Bending machine bending angle: 145 degrees max Cut with the roller shears over the entire working width Bending beam thickness: 15 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Upper beam stroke: 80 mm degree scale Weight of the folding bench: approx. 180 kg Roller scissors 0.8mm plus 350 euros Manual folding machine 75 euros Price: 1350 euros Delivery date: every week We are looking forward to your contact! Guelhcdwscxu Uxj Dsk Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: new, Year of construction: 2025, ZGR-2140/0,8 Our products are of the best quality and have Certificate CE. Plate Bending Machine ZGR-2000\0,8 Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,5 mm Cooper plate 1,25 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length Gusljcntk Rehcdw Djk max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty Price: 1.050,00 Euro ( VAT excl. )

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2426 09 1364, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Guelhexywupecdw Dek Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Fume extraction system

Condition: used, Year of construction: 2003, The Mueller Martini CB 16 stacker, manufactured in 2003, is a robust and efficient solution for stacking and organizing printed materials. With a format of 500 x 340 mm, this stacker is currently in production and located in the United States. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods, cleared for export, to the carrier appointed by the buyer. The machine is in good condition, ensuring reliable performance for various stacking tasks in printing and finishing applications. Format: 500 x 340 mm Equipment: Guelsvmnfpshcdw Dek Good condition without any damage

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For Sale — Buhrs B5000 Paperwrapper (2015) — Only 11,055,783 cycles, up to 24,000 pph Model: Buhrs B5000 paper wrapping / mailing system Year: 2015 Total cycles: 11,055,783 (low usage — counter photo attached) Rated speed: up to 24,000 packages per hour Condition: Very good and fully operational; clean mechanics and controls; maintained on schedule Location: USA Included: Complete integrated system : Rotary feeder, automatic product loader/conveyor for rotary feeder products, gathering section, PPU ( product positioning unit ) wrapping section, eject station, product discharge conveyor, Buhrs data controller, Domino k600i inkjet, Nordson Blue 7 glue system with 2 heads and 2 hoses, manuals. Additional feeders/conveyors can be discussed during inspection. Inspection: Available under power by appointment; video test available on request. Logistics: Professional dismantling/packing and worldwide shipping can be arranged. Shipping is extra — within the US estimated at USD 2,000; to a major European port estimated at USD 3,000 (final quote depends on destination). Terms: EXW USA by default. Bank wire; 100% prior to loading into a truck or sea container. Location: Wisconsin, USA Availability: Immediately Ownership: Direct sale from Himin Industries Inc., not brokered Asking price: €154,000 — ONO — price without VAT (export sale) Gslhoxdn Nrecdw Douk Export sale from USA – no VAT charged by the seller. Local VAT and import duties, if any, are payable by the buyer in his country. Machine was used in a clean and climate-controlled environment and is in excellent mechanical and optical condition. We can assist with international shipping, crating, and export documentation. Video and inspection available upon request. Direct sale by owner. No brokers. Serious inquiries only.

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Guolsv Nw Npehcdw Dsk Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Year of construction: 2012, operating hours: 2,448 h, 2012 | Wacker Neuson 803RD | Used Mini Excavator < 7t | 2448 hours 📍Location: France, Saint-Étienne Gujlhox Dq Drecdw Djk 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 10800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 55 inspection points 42 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition. The battery was out of use and the alternator needed to be checked – this was noted during the inspection. However, the seller replaced the battery and the alternator, and now everything is working properly. Variable track, 2 buckets. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39891 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 290,000 km, power: 107 kW (145.48 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 09/2008, next inspection (TÜV): 02/2025, emission class: euro4, color: blue, number of seats: 3, Year of construction: 2008, total length: 5,998 mm, Equipment: ABS, central locking, parking heater, soot filter, NEW !!! Chat with our sales consultant via WhatsApp: *.---- Optional for an additional charge: Guolhswppwkocdw Dek * New inspection * NEW TÜV & Emissions test * Nationwide delivery ---- * 19% VAT can be shown * German vehicle * Regularly maintained * Total weight = 3500 kg / Empty weight = 2340 kg * Trailer hitch = 3500 kg * High + Long * Twin tires * Webasto parking heater * 3-seater * 6-speed gearbox * Tachograph * etc... ----We offer attractive leasing & financing offers - contact us! (On request also without down payment) Have we piqued your interest? Please contact us by phone at: or by email at: ----Directions: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45177 Datteln Germany Opening hours: Mon-Fri: 9:00 am - 6:00 pm Sat: 9:00 am - 2:00 pm----Legal: The information provided on the Internet is non-binding descriptions. They do not represent guaranteed characteristics, but merely serve the general identification of the vehicle and do not constitute a warranty in the legal sense. Please understand that mistakes can also happen to us. Therefore, we expressly reserve the right to prior sale, errors, or input mistakes, especially regarding technical data and the advertised equipment scope. The vehicle description serves only the general identification of the vehicle and does not constitute a warranty in a legal sense. The information/descriptions provided are non-binding and the seller accepts no liability or warranty for typographical and data transmission errors. Equipment may need to be checked separately. The contractual condition is only that which was inspected on-site at the time of purchase or has been confirmed in writing! Please understand that we preferably sell vehicles with a mileage of 50,000 km or more or older than 3 years to our commercial customers.

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion Guelovuugijhcdw Djk hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, DAEWOO ACE-H500 For sale Daewoo ACE-H500 horizontal machining center, a heavy-duty and reliable HMC designed for high-precision and high-productivity machining. The ACE-H500 is well known for its rigid construction, powerful spindle, and long service life, making it an excellent choice for subcontracting and industrial production. Daewoo (now DN Solutions) machines are highly regarded worldwide for durability, accuracy, and ease of maintenance. Technical specifications: Pallet size: 500 × 500 mm Number of pallets: 6 Max. workpiece size. Ø800 × 1000 mm Max. workpiece weight. 800 kg X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 650 mm Spindle taper: BT50 Max. spindle speed: 6000 rpm Spindle motor power: 12 kW Tool magazine capacity: 120 tools Tool change type: Automatic CNC control: FANUC Rapid traverse (X/Y/Z): 24 m/min Machine dimensions (L × W × H): approx. 4.5 × 2.8 × 3.0 m Machine weight: approx. 12,000 kg General: Rigid box-type construction for stable heavy cutting High torque spindle suitable for steel and cast iron Excellent accuracy and repeatability Ideal for series production and flexible manufacturing Proven platform with strong spare parts availability Golex Htawjhcdw Dsuk Test run possible by appointment. Ask for the price delivered. Verify the details with the seller.

Condition: used, Year of construction: 2020, operating hours: 4,930 h, functionality: fully functional, machine/vehicle number: 510-3888, rotor diameter: 370 mm, number of blades: 82, power: 75 kW (101.97 HP), WEIMA WLK 1500 / 75 kW V-Rotor Industrial Shredder Suitable for Paper, Wood, Plastic, Metal (Swarf), Textiles and General Waste Processing Summary Heavy-duty WEIMA WLK 1500 industrial shredder with a 75 kW V-Rotor, suitable for continuous processing across multiple waste streams including paper and cardboard, wood and biomass, plastics, metal swarf, textiles, and general waste reduction. The machine is supplied complete with its associated extraction unit. Key Specifications • Manufacturer: WEIMA • Model: WLK 1500 • Rotor Type: V-Rotor • Installed Power: 75 kW • Cutting Chamber: 1500 mm working width • Material Suitability: Paper, cardboard, wood, plastics, metal swarf, textiles, mixed waste • Feed: Conveyor-compatible • Running Hours: 4,930 hours • Condition: Operational and available for inspection Included with the Machine • New, unused replacement blade set Gujlhcdex Eklnsw Dok • Dedicated extraction unit (multi-port extraction with collection bags, as shown in photos) Inspection and Condition This machine was originally purchased from Fercell. A recent inspection by Fercell identified several maintenance and condition items, which have been fully considered within the selling price. Inspection Findings • Hydraulic hose leaking • Screen door switch damaged • Screen door handle missing • Screen doors modified for reverse Ram operation (recommended to return to factory specification) • Control panel isolator switch damaged (replacement recommended – panel currently remains live/on) • Hopper dog box damaged (replace if required) • Rear hydraulic door – two damaged threads requiring repair • Hydraulic oil low due to hydraulic hose leakage (full service and oil top-up recommended) Full inspection notes can be provided to interested buyers. Applications • Paper and cardboard recycling • Wood recycling and biomass preparation • Plastic recycling and re-processing • Metal swarf reduction • Textile destruction and processing • General waste management and volume reduction Condition and Viewing • Operational condition • Available immediately • Available for inspection by prior arrangement Decommissioning and Removal Buyer to arrange full decommissioning, disconnection, dismantling, lifting and removal of the equipment. Seller will provide reasonable site access for inspection and collection. Additional Items Available (separate cost) Outfeed Incline Conveyor (1.75 kW) – Heavy-Line PVC Belt “L-Type” Conveyor Industrial conveyor transferring shredded material from the shredder to the extraction system. Key Features: • Durable PVC belt • L-shaped elevation design • Steel frame • Adjustable discharge height Price: £9,000 Screen Insert – WEIMA WLK 1500 (30 mm, t = 10 mm) Spare classification screen for controlling shred size from the WLK1500 shredder. Key Features: • 30 mm hole pattern • 10 mm heavy-gauge steel • Improves consistency of final product • Quick installation Price: £1,000 Pricing • WEIMA WLK 1500 Shredder with extraction unit: £55,000 (€62,960) • Outfeed Incline Conveyor (optional): £9,000 (€10,300) • Screen Insert (optional): £1,000 (€1,445) Reason for Sale Business closure. Location Haverhill, CB9 8QP, United Kingdom

Condition: used, mileage: 393,247 km, power: 185 kW (251.53 HP), first registration: 06/2016, overall weight: 14,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,500 mm, loading space length: 7,300 mm, loading space height: 2,400 mm, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), soot filter, tail-lift, Iveco Eurocargo 140E25 Dropside/Tarpaulin/ tail lift 2nd owner Demo vehicle Iveco, Full service history, MOT (roadworthiness inspection) new on request Wheelbase 5175 mm, AdBlue tank 30 L, no ADR equipment - Features: Trailer hitch, 40 mm, 120kN; C-profile steel ladder frame; standard rear overhang 17800 17803 17804; center exhaust outlet; batteries 170 Ah; tires 285/70 R 19.5 road; standard day cab with flat roof; roof spoiler in cab color; standard component positions; generator 2160W (24V x 90A); rear axle ratio i = 3.73; plastic fuel tank 200L; air tanks made of steel; air filter unit under cab; air compressor 360 ccm; no engine PTO, no additional PTO, no rear PTO; spare wheel with side mounting; WITHOUT RETARDER; standard configuration; mirrors suited for body width 2600mm; emission standard Euro VI 2014 OBD II; ABS, ASR, and ESP; front maneuvering and towing eye; Iveco axle registration – narrow track; permissible gross weight variants 5100/9500 kg; Emergency Braking Assistant (AEBS); no driver airbag; automatic seatbelts; left-hand drive for right-hand traffic; standard gross vehicle weight without oil sump protection; Rockinger trailer coupling; trailer socket 24V 15-pin; without additional trailer socket; trailer version; moderate climate specification; right armrest on driver’s seat; electric adjustable and heated mirrors; no sleeper; battery charged; comfort front passenger bench seat; twin rear tires; hill start assist (Hill Holder); on-board tools MS10-144; unrestricted COC (Certificate of Conformity); no roof hatch; no FMS-VDI interface; differential lock on rear axle; compressed-air coupling; EC 2 EuroVI MY15 documentation; no engine power reduction; digital tachograph 1T/2F; first aid kit; cab attachments in black; cab rear wall without window; luxury driver’s seat; lane departure warning assistant, etc. Appointments and test drives available by telephone arrangement. Guslhcoxav Dcjdw Dek The information provided online is non-binding and does not represent guaranteed features. The seller is not liable for typographical or data transmission errors. Subject to change and prior sale.

Condition: used, mileage: 169,978 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 12/2019, emission class: euro6, color: white, number of seats: 6, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Sprinter 316 CDI Mixto Panel Van 4x4 with Transfer Case! Equipment: - Body type: Mixto Panel Van L2H1 - Switchable all-wheel drive with transfer case (ZG3) - Rough road specification - Air conditioning - Auxiliary warm air heater - Thermal insulation for driver and passenger compartments - Heated comfort driver and passenger seats with lumbar support - Passenger compartment with narrow 3-seat bench in 1st row - C-pillar partition - Tow bar for increased trailer load, 2.8t, with step - Twin rear doors, 270-degree opening - Roof rack Technology: - Audio 25 radio with navigation system - Multifunction steering wheel - MBUX multimedia system with 7-inch touchscreen - Reversing camera - Cruise control - Electrically adjustable and heated exterior mirrors, both sides - Outside temperature display, keyless start - Smartphone storage including wireless charging, smartphone holder Safety/Emissions: - Drive type: All-wheel drive - Driver and passenger airbags - Traction control (ASR) - Brake assist - Electronic brake force distribution (EBV) - Driver assistance system: Crosswind Assist - Driver assistance system: Lane Keep Assist - Low-emission according to Euro 6 emissions standard Miscellaneous: - German first delivery - 1 previous owner - Engine: 2.1 litre – 120 kW CDI CAT - Wheelbase: 3665 mm - Permissible gross weight: 3.5 t - The vehicle was on a maintenance contract Your reliable partner for all automotive and commercial vehicle needs since 1972 in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approx. 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We regularly offer attractive finance options with special conditions. Upon request, we are happy to provide you with a tailored quote! Gjljxvnqyjhcdw Dsuk Trade-in of your commercial vehicle/construction equipment is welcome. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection. Delivery of your "new" commercial vehicle can be arranged through our external partners for an additional cost. The information provided in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability/warranty for typographical and data transmission errors. The listed equipment must be checked individually if necessary. Subject to error and prior sale.

Condition: used, mileage: 229,000 km, power: 93 kW (126.44 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 11/2010, emission class: euro5, color: white, number of seats: 3, Equipment: ABS, central locking, NEW!!! Chat with our sales consultant via WhatsApp: *.----Optional: * 12-64 month warranty (valid throughout Europe) * New inspection * New MOT & AU (exhaust emission test) * Nationwide delivery * Financing also without a down payment ---- * 19% VAT deductible * German vehicle * Regularly serviced * Euro 5 standard ---- We offer attractive leasing and financing offers - contact us! (Without a down payment upon request) Guolhcswzgi Iodw Dsk Have we piqued your interest? Please contact us by phone at: or by email at: ----Directions: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45177 Datteln Germany Opening Hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. ----Legal Notice: The information provided online is non-binding. It does not represent guaranteed features, but merely serves as a general identification of the vehicle and does not constitute a warranty under the German sales law. Please understand that we may also make mistakes. Therefore, we expressly reserve the right to make prior sales, errors, or typing errors, particularly regarding technical specifications and the advertised equipment. The vehicle description serves only as a general identification of the vehicle and does not constitute a warranty under the German sales law. The information/descriptions provided are non-binding, and the seller assumes no liability or warranty for typing or data transmission errors. Equipment must be checked separately if necessary. Only the condition that was inspected on-site at the time of purchase or confirmed in writing is considered to be in accordance with the contract. Please understand that we prefer to sell vehicles with a mileage of 50,000 km or more or older than 3 years to our commercial customers.

Condition: used, Year of construction: 1996, pressure 100 t distance between columns 1525 mm stroke 450 mm distance table/ram, max. stroke up, adjustment up 850 mm table surface area 1500 x 1150 mm pressure of drawing cushion in table 30 t stroke of drawing cushion in table 150 mm table height over floor 940 mm side window 480 mm ram surface 1500 x 1150 mm oil volume 1200 l weight 25,0 t dimensions (WxDxH) 4,2 x 1,75 x 5,1 m light guard Sick Gjlhovuufxocdw Deuk permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, mechanical depth stop No foundation pit necessary 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, functionality: fully functional, turning diameter over cross slide: 280 mm, turning length: 600 mm, turning diameter: 230 mm, spindle speed (max.): 4,500 rpm, overall weight: 3,500 kg, CNC LATHE GOODWAY GCL-2L (1997) Gslhcdwjx Hr T Ao Douk For sale Goodway GCL-2L CNC lathe, year 1997. A robust and reliable turning center well suited for general machining, subcontracting, and small to medium batch production. Equipped with FANUC OT control, this machine offers proven performance and easy operation. Technical specifications: Turning length: 600 mm Max. turning diameter: Ø230 mm Swing over bed: Ø400 mm Swing over cross slide: Ø280 mm Distance between centers: 462 mm CNC control: FANUC OT X-axis travel: 125 mm Z-axis travel: 340 mm Spindle bore: 52 mm Max. spindle speed: 4500 rpm Spindle motor power: 15 kW Number of turrets: 1 Tools on turret: 8 Rotating tools: 6 Tailstock: No Bar feeder: No Machine dimensions (L × W × H): 2100 × 1300 × 1700 mm Machine weight: approx. 3500 kg General: Heavy-duty and stable construction Proven Goodway build quality Reliable FANUC control system Suitable for subcontracting and workshop use Ideal for both single-piece and small series production The deal includes a bar feeder. Ask quote including transportation. Verify all specifications with the seller.

Condition: used, mileage: 166,000 km, power: 251 kW (341.26 HP), first registration: 05/2017, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,470 mm, loading space length: 8,100 mm, loading space height: 2,196 mm, Equipment: ABS, air conditioning, navigation system, tail-lift, We are very pleased that our offer has caught your interest and can already assure you that you will be able to purchase a high-quality and competitively priced vehicle with a fully traceable service history from our company! Certified BÖSE body with 4-row rear load securing system Towing eye Tow ball Tail lift 2,000 kg Steering axle Full air suspension Reversing camera Navigation Automatic transmission Air conditioning Differential lock Roof spoiler Sun visor German vehicle REGISTRATION / CUSTOMS SERVICE Guslsx Hncgohcdw Dek We organize your vehicle registration and prepare export documents, including EUR 1 and manufacturer’s declaration for export purposes. FINANCING We are happy to provide you with a leasing, hire-purchase, or financing offer upon request. SERVICE TÜV general inspection / UVV tail lift test / LGS inspection / tachograph check / installation and servicing of OBU unit by our authorized workshop on site. TOLL / ROAD FEES Toll arrangements can be made on site. TRAVEL / DISTANCES Wittlich train station is 500 m away Frankfurt Airport is 150 km away Frankfurt-Hahn Airport is 40 km away Luxembourg Airport is 75 km away Sale in accordance with our Terms and Conditions. The information provided online constitutes non-binding descriptions and does not represent guaranteed characteristics. The seller shall not be liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 180 mm, turning length: 180 mm, turning diameter: 180 mm, spindle bore: 42 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 60 rpm, overall weight: 6,000 kg, CNC LATHE GTS-150 For sale GTS-150 CNC lathe, a compact yet powerful machine suitable for precise and efficient turning operations. Thanks to its rigid construction, high spindle speed, and reliable FANUC control, this machine is an excellent choice for versatile workshop and subcontracting use. Technical specifications: Max. turning diameter: Ø180 mm Max. turning length: 180 mm Max. swing over cover: 180 mm Chuck size: 6″ Bar capacity: Ø42 mm Spindle bore: Ø51 mm Spindle speed range: 60–6000 rpm Spindle motor: 5.5 / 7.5 kW Spindle bearing diameter: Ø80 mm Spindle nose: A2-5 X1 / X2 travel: 155 mm Z1 travel: 180 mm Z2 travel: 500 mm Controller: FANUC 18i-TB Hydraulic / coolant tank capacity: 50 / 140 L Machine dimensions (L × W × H): 2.4 × 1.7 × 1.8 m Machine weight: approx. 6000 kg Gslhcjx Hr Slsdw Deuk General: Rigid and stable construction High-speed spindle with precise motion control Suitable for both single-piece and series production Excellent choice for subcontracting and precision machining Machine comes with IEMCA bar feeder Ask quote including transporation. Verify all specifications with the seller.