Used Meise for sale (50)

Condition: excellent (used), Ameise tiered trolley with wire mesh 2 sides closed 3 tiers: 800 x 1200 mm Ameise Type 167704 SW - 800.305 A E 2017563 Length without handle: 1270 mm Width: 800 mm Height: 1820 mm Load capacity of platform: 180 kg Load capacity per shelf: 80 kg Duedpsyvfrisfx Affer Total load capacity: 500 kg Own weight: 128 kg

Condition: used, functionality: fully functional, Shelf trolley / Transport trolley / Order picking trolley / up to 7 levels / 3 mesh walls / 3 shelves Dusdpfxeyw Nths Affer

Condition: excellent (used), Scissor roller conveyor Manufacturer: Ameise Tk Article number: 160927 Load capacity: 180 kg Max. length: 1295 mm Min. length: 420 mm 9 rollers Dedpfx Ajymmg Aoffeur Roller diameter: 42 mm x 500 mm Year of manufacture: 2019 4 swivel castors with locking Continuously adjustable working height from 670 to 940 mm Several units available

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding Dujdpeykud Djfx Affsr F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Duodpeb A Rlrsfx Affjr Thread cutting machine, pipe thread cutting -inch thread jaws: 1/4" - 1 1/2" inch -Weight: 8 kg

Condition: defective spare-parts repository (used), Electric pallet truck with tiller, Jungheinrich, Ameise EJE 222 – used, defective battery - : Price on request! Dujdjyzfncopfx Affer Manufacturer: JUNGHEINRICH Model: Ameise EJE 222 (defective battery) Serial number: 90106944 Year of manufacture: 2004 Rated capacity: 2,200 kg Unladen weight without battery: 380 kg 24V, 1.5kW Battery weight: 171 / 263 kg Operating hours: 7,255 h Lift height: 130 mm Fork length: 1,150 mm Vehicle weight: 643 kg Condition: good Available: immediately Location: 97828 Marktheidenfeld

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 57 h, load capacity: 1,200 kg, lifting height: 2,600 mm, fuel type: electric, construction height: 1,800 mm, High-lift truck Jungheinrich Ameise PSE 1.2 Li-Ion, year of manufacture 2024, 57 operating hours, lifting height 2600 mm, overall height 1800 mm, load capacity 1200 kg, weight 563 kg, integrated charger, serial no. N21062040090 Duedeyw Id Ejpfx Affsr

Condition: good (used), Year of construction: 2019, 6x pallet wrappers, Jungheinrich, Premium, open turntable, Ø 1,500 mm, infinitely variable turntable drive – used -: Price ex-location: only €4,500 (net)! Manufacturer: Jungheinrich Type: Ameise Superstretch 152 30 GV mas3Ph Year of manufacture: 2019 / 2020 Model: Premium Max. pallet width: 800 mm Max. pallet length: 1200 mm Max. pallet weight: 1,500 kg Max. pallet height: 2,400 mm Pallet height detection Condition: good Duedpfx Ajyrq D Aoffsr Available: immediately Location: Erfurt, later warehouse Augsburg Item no. 11 / ? / 17 / 36 / 37 / 40 /

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm Duedpfjykuhcjx Affjr ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 1,300 kg, fuel type: electric, drive type: Elektro, Low-lift pallet truck Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V Djdpfx Afjyhkfxjfour Battery condition: 0 - 20%

Condition: used, Year of construction: 2014, * Model: LPE 240 * Year of manufacture: 2014 * Load capacity: 2,400 kg * Weight without battery: 700 kg * Battery voltage: 24V * Charger Dusdpjrgmzpsfx Affjr -----Internal vehicle number: 9106----Subject to errors and prior sale. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us easily via WhatsApp WhatsApp German, English -- WhatsApp German, English, Arabic

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,817 h, load capacity: 1,200 kg, lifting height: 4,200 mm, free lift: 1,600 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 1,850 mm, power: 1.6 kW (2.18 HP), gearing type: automatic, battery manufacturer: Jungheinrich, battery model: 24v 3PzS375, battery capacity: 375 Ah, remaining battery capacity: 71 %, battery voltage: 24 V, battery weight: 300 kg, fork carriage width: 560 mm, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 50 mm, overall weight: 1,133 kg, empty load weight: 860 kg, total height: 1,850 mm, color: yellow, Equipment: pallet forks, Jungheinrich EJC 212 Electric High-Lift Pallet Truck. Load capacity: 1,200 kg Fork length: 1,150 mm (standard) Lifting height: 4,200 mm The machine is in good condition, no pending repairs, hydraulics leak-free. Battery serviced and capacity-tested by professional service. Technical specifications: Manufacturer: Jungheinrich Model: EJC 212 Operating hours: 3,817 Year of manufacture: 2019 Load capacity: 1,200 kg Duedpfx Aexztbusffer Overall height: 1,850 mm Free lift: yes Fork length: 1,150 mm Lifting height: 4,200 mm Triplex mast Battery: 71% remaining capacity, wet cell battery C5 discharge test: 269 Ah at full load for 3:36 h Approx. 7h operating time Includes document holder and integrated charger A higher-performance battery can be installed at extra cost. Net export possible.

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 550 mm, overall weight: 11,000 kg, total height: 2,500 mm, table load: 1,200 kg, number of axes: 2, This AMADA MEISTER G3 surface grinding machine was manufactured in 2013 and is a robust solution for precision surface grinding applications. The machine is currently not in working condition due to an electronic/control issue. The FANUC controller was replaced; however, the machine did not return to operation after the replacement. A repair was proposed by the manufacturer’s service at an estimated cost of €15,000–€20,000, which was not carried out. As a result, the machine has been out of service and switched off for several years. Please contact us for further information. Machine Benefits Technical Machine Benefits Duodpfx Asyz Scgoffor • Suitable for heavy-duty operations. Extra Information The machine is currently not under power Dimensions Machine Depth 6400 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,395 h, travel distance X-axis: 380 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 2, This 3-axis Gildemeister CTX 620 linear was manufactured in 2007. A horizontal turning machine, it includes tool holders and a tail stock. Consider the opportunity to buy this Gildemeister CTX 620 linear horizontal turning machine. Contact us for more information. Siemens 840D with shopturnSpindle with integrated motorTailstockChip conveyorSpray gunAutomatic doorHollow clamping cylinder SMW 121 mmSMW Autoblok 400 BHD-FL ø 118 hollow Additional equipment Duedpfxex Stlqj Affer • Tool holders (as shown in pictures) will follow • Tailstock will follow Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2004, operating hours: 145,113 h, machine/vehicle number: IntNr231164, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Duedoyzzvcepfx Affsr Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: used, Electric pedestrian stacker, low-lift pallet truck, "Ameise", tiller stacker JUNGHEINRICH type EJE 116 Machine no.: 90292723 Year of manufacture: 2008 Rated capacity: 1600 kg Lift height: 200 mm Fork length: 1150 mm Operating voltage: 24 Volt Overall length: 1750 mm Dujdpfxjyxy Sqs Affjr Overall width: 730 mm Height with tiller: 1330 mm - Battery from 2014, type 24V 2 PzS 250 (24 Volt, 250 Ah) - Automatic battery charger Jungheinrich 24 Volt, 20 Amp - 2767 operating hours recorded. Weight approx. 560 kg In good condition

Condition: used, Year of construction: 2012, operating hours: 20,000 h, machine/vehicle number: IntNr231536, High-end CNC turning centre with 2 turrets, 2 Y-axes and IRCO bar feeder Control: SIEMENS 840D SolutionLine with ShopTurn interface Year of manufacture: 2012 Spindle hours: 20,000 Maximum turning diameter: approx. 390 mm Maximum turning length: 1,250 mm Bar capacity: 76 mm (standard) Dedsyxpz Ijpfx Affsur X-axis travel: 300 mm Z-axis travel: 1,250 mm Y-axis travel: +/- 60 mm (both turrets) Spindle specifications: Speed: up to 5,000 rpm Drive power: 34 kW (40% duty cycle) Torque: up to 380 Nm 4-axis kinematics 2 x 12-position turrets (all stations suitable for driven tools) Speed up to 6,000 rpm, power 11.3 kW Gear cutting software, including specialised tool holders for gear hobbing/cutting. IRCO MUK short bar loader Hinged belt chip conveyor 20 bar high-pressure coolant system with paper belt filter Subject to prior sale. Specifications subject to change and errors excepted!

Condition: used, Electric pedestrian stacker, pallet stacker JUNGHEINRICH type EJC 214 Serial no. 90396426 Year of manufacture 2011 Rated capacity: 1400 kg Load centre: 600 mm Rated lift height: 4300 mm Fork length: 1150 mm Overall length: 2050 mm Overall width: 800 mm Overall height: 1900 mm Operating voltage: 24 Volt - Triplex mast with 1400 mm free lift - electric steering assist - 1619 operating hours (displayed) - Battery from year 2011, type 24V 3 PzS 375 (24V/375 Ah) - Automatic charger Jungheinrich 24 Volt, 40 Ampere Dedexxmfzspfx Affsur - Surcharge for new UVV inspection = EUR 150 net Weight: 1300 kg in good condition

Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details. • Electrical connection/total power: 65 kVA • Tool holder: VDI 30 • Tool changer type: Turret • Configuration: Multi-slide turning center with Slide 1 (Top), Slide 2 (Bottom), and Slide 3 (Counter spindle) • Axes travels: • Slide 1 (Top): X1 (Cross) 300 mm; Z1 (Longitudinal) 650 mm; Y1 (Vertical) ±40 mm (only on version with Y-axis) • Slide 2 (Bottom): X2 (Cross) 180 mm; Z2 (Longitudinal) 650 mm • Slide 3 (Counter spindle): X3 (Transverse) 175 mm; Z3 (Longitudinal) 670 mm • Counter spindle: max speed 5000 rpm; power 26 kW (40% ED) / 21 kW (100% ED) • C-axis: Integrated for oriented stopping and contouring • Driven tools: 12 stations per turret; all 12 stations capable of driven tools; max power 11.7 kW; speed up to 4000 rpm Dsdpeyvz Ibjfx Affsur Additional equipment • Touch probe • Chip conveyor • Internal coolant supply Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 1995, - Pneumatic pick-up - Pick-up brake - Axial control station 5 - Oscillating pick-up arm passage 25 - 1 tool breakage detector - Bar drop cylinder - Siemens OP5 panel - IEMCA PRA 40/42P bar loader Duodpjuq A Aysfx Affjr

Condition: used, Electric pedestrian pallet truck, low lift pallet truck, Ameise, pedestrian-controlled stacker JUNGHEINRICH type EJE 116 Dujdpfx Aeyr R Dvjffjr Serial No.: 98008311 Year of manufacture: 2010 Rated capacity: 1600 kg Lift height: 200 mm Fork length: 1150 mm Operating voltage: 24 Volt Overall length: 1750 mm Overall width: 730 mm Overall height with tiller: 1300 mm - Battery from 2014, type 24V 2 PzS 250 (24 Volt, 250 AH) - Automatic battery charger Jungheinrich 24 Volt, 30 Amp. - 2399 operating hours recorded. Weight approx. 560 kg Good condition

Condition: used, Electric pedestrian stacker, low-lift pallet truck, powered pallet jack, tiller stacker JUNGHEINRICH type EJE 116 Serial no.: 90316421 Year of manufacture: 2008 Rated capacity: 1,600 kg Lift height: 200 mm Fork length: 1,150 mm Operating voltage: 24 Volt Overall length: 1,750 mm Overall width: 730 mm Overall height with tiller: 1,330 mm - Battery from year 2013, type 24V 2 PzS 250 (24 Volt, 250 Ah) Djdpsyr R Dpefx Affeur - Automatic battery charger Jungheinrich 24 Volt, 25 Amp. - 3,818 operating hours recorded Weight approx. 560 kg Good condition

Condition: ready for operation (used), Year of construction: 1996, number of axes: 2, This Gildemeister MF twin 65 was manufactured in 1996. It features two turrets, each with 12 tool positions, all motorized-capable, and includes 14 driven tools and 14 tool holders. The machine boasts both spindles in very good condition and a bar passage of 65 mm, complemented by a Cucchi Pietro bar feeder. Contact us for more information about this machine. • 2 turrets (12 + 12 tool positions), all motorized-capable • Bar passage: 65 mm • Both spindles in very good condition Dsdpfx Aeyaqr Aoffeur • New hydraulic/power unit pump Additional equipment • Cucchi Pietro bar feeder • 14 driven tools • 14 tool holders

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, overall weight: 6,000 kg, number of axes: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Additional equipment • shopturn option Machine Benefits Technical Machine Benefits • Availability from • Weight: 6000kg • 40 kVA • 58 A In max • 63 A • 400 V • 50 Hz • Control system: Siemens Sinumerik 840D Slimline • Main drive: AC main drive 25 / 32 kW • Duty cycle: 100% / 40% ED • Spindle speed: 5000 rpm • Torque: 280 / 360 Nm • Hollow clamping cylinder • 12-position turret with tool holder • Turret diameter: 340 mm • Hinged belt chip conveyor • 4-color status signal light • Air blow through main spindle • C-axis with driven tool system for turret UDI 40 • Drive for all tool stations • Y-axis travel +90 / −65 mm • Linear guideway system • Ball screw spindle • AC servo motor with integrated absolute encoder • Glass scale on guideways • Rapid traverse speed: 30 m/min • Coolant system 8 / 20 bar • Coolant tank capacity: 600 liters • Coolant pump flow rate: 8 bar / 20 l/min • High-pressure pump flow rate: 20 bar / 40 l/min • Coolant supply via turret disk to all turret stations • Band filter system filtration grade: 40 µm • Coolant level monitoring • Integrated working area extraction max. 400 m³/h • Workpiece probe Renishaw LP2DD • Probe installed at loading and unloading station • Stylus with pneumatically actuated flap and electrical control • Measuring accuracy: 10 µm • Function plate for additional tools • Machine cabinet temperature control max. 40°C • Electrical cabinet cooling unit up to 40°C • Hydraulic oil cooler • Remote diagnosis support via internet • Working area flushing with 3 flushing screw connections • Two separately switchable valves with 8 bar pressure • Workpiece discharge conveyor for part transport system SRA 160 • Workpiece diameter: 100 mm • Continuous workpiece transport system SRA 160 in drag chain design • Storage capacity: 30 workpieces diameter 30–70 mm max 7 kg • Storage capacity: 18 workpieces diameter 30–100 mm max 15 kg Dodpjx D Nl Iefx Affsur • Maximum workpiece height: 160 mm • Maximum total workpiece weight: 320 kg including pallets • Loading height approx. 800 mm • Chain conveyor belt with transport prisms • Drag chain movement controlled by NC axis • Set of drag frames • Workpiece diameter minimum 30 mm maximum 160 mm • Light barrier for workpiece transport system pick-up station • Hold-down device for loading pallets SRA 160 • Robot interface Profinet • Electrical interface for 6-axis robot via Profinet • Power chuck centering and face clamping chuck • Intermediate storage tray supported on function plate • Air blow cleaning for inner workpiece area • Measuring probe with air blow with two nozzles front and rear • Clamping pressure adjustment with motor-controlled valves • Clamping pressure programmable via NC program • Extension of chip discharge chute on chip conveyor by 300 mm • Aluminium machining package • Modified slurry pump on chip conveyor • Forced indexing of band filter • Larger chip container • Extension of plug-in screens from chip conveyor • 3D data model of machine working area in STEP and IGES format • Delivery of 3D model on CD • PLC / SPS source code including hardware configuration of Siemens control in English

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,137 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 202 mm, travel distance Z-axis: 450 mm, spindle motor power: 12,000 W, total height: 1,730 mm, total width: 1,563 mm, overall weight: 3,500 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D powerline, product length (max.): 4,000 mm, number of axes: 3, This 3-axis Gildemeister CTX 310 was manufactured in 2003. It features a maximum turning diameter of 246 mm and a turning length of 445 mm. The machine is equipped with a spindle power of 12 kW and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 310 horizontal turning machine we have for sale. Contact us for further details. • Availability: 2 units available • Spindle • Nose: FL 140 h5 • Max torque: 115 Nm (153 Nm at 40% S6) • Bore: 69 mm • Chuck diameter: 170 mm (optional 210 mm) • Bar capacity: Ø 50 mm • Working range • Swing over bed: 500 mm • Max turning diameter: 246 mm • Max turning length: 445 mm • Distance between centers: 600 mm • Turret and tools • Turret type: VDI 30 • Tool stations: 12 • Driven tools speed: 4200–5000 rpm (depends on control: Fanuc/Siemens/Heidenhain) • Driven tools power: 3.3–4.4 kW • Feeds and axis data • Rapid traverse (X/Z): 24/30 m/min • C-axis rapid: 100 rpm • Feed force (X/Z): 450 daN • Resolution (X/Z): 0.001 mm • Bed • Inclination: 45° • Material: Cast iron • Electrical and auxiliary • Supply voltage: 400 V (±10%), 50 Hz Dodpfxjympcao Affeur • Total installed power: 24 kVA • Hydraulic system pressure: 50 bar • Coolant tank capacity: 175 liters • Control systems (options): GE-FANUC 21i-TB, Siemens 840D, Heidenhain 4290 E Additional equipment • Chip conveyor (both units) • Extraction unit (one unit)