Used Bale Press for sale (12,649)

Year of construction: 1996, condition: used, Baling press Manufacturer: HSM Hnedpfxozuz D Rj Acqjr Type: 55.1VL Year of manufacture: 1996 Technical data - 4.0 kW motor - 18 t pressing force - 400 V / 50 Hz Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Year of construction: 1997, condition: used, Baling press Manufacturer: HSM Type: HSM 75 VL Hsdpjzuz Dwjfx Acqjnr Year of manufacture: 1997 Technical data: - 2.2 kW motor - 9 t pressing force - 400 V / 50 Hz Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, Baling press Presona LP 85 VH2, year of manufacture 2018 Hedpfx Ajzulknocqonr Technical data: Manufacturer: Presona Sweden Type: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pressing force, pre-press: 28 t Pressing force, main press: 85 t Feed hopper dimensions: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical volumetric output: 1200 m³/h Throughput capacity at 30-100 kg/m³: 13-30 t/h Tying: 5-wire vertical, (3-wire horizontal) Oil tank volume: 2000 L Transport dimensions, press: 10400 x 2400 x 2800 mm (L x W x H) Weight: approx. 27,000 kg Materials: Paper, cardboard, PET bottles, film, light waste. Note: The press is in good condition. It has been dismantled from ongoing operation. The following work has been carried out by us: New wear plates in the press channel Complete replacement of seals on the main cylinder Oil filter changed Vertical tying mechanism overhauled and made operational The horizontal tying mechanism is currently not functional. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2017, functionality: fully functional, In stock Baling press HSM, type HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of manufacture: 2017 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x L) Bale weight: up to 600 kg Hodjzt N Afjpfx Acqsnr Tying: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any possible errors. The offer is non-binding, subject to prior sale and may be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: good (used), Year of construction: 2021, functionality: fully functional, In stock Baling press HSM, type HL 7009 ST/A, year of manufacture 2021 Technical data: Manufacturer: HSM Type: HL 7009 ST/A Year of manufacture: 2021 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x L) Bale weight: up to 600 kg Tying: 4-way horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Hsdpfx Aszt Nzzjcqonr Weight: 7500 kg Materials: paper, cardboard, film Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: good (used), Year of construction: 2018, operating hours: 6,765 h, functionality: fully functional, In stock Channel baler HSM VK 4812P, year of manufacture 2018 Manufacturer: HSM Type: VK 4812P Year of manufacture: 2018 Operating hours: 6765 Pressing force: 48 t Drive power: 15 kW Total power: 18 kW Feed opening: 1020 x 1250 mm (W x L) Capacity: 50 kg/m³: 7.5 t/h Hnsdpfx Aoztphhjcqor Bale size: 1,100 x 750 x 600-1200 mm Bale weight: 300-550 kg Tying: 4-fold, automatic Transport dimensions: approx. 7,530 x 2,400 x 2,400 mm (L x W x H) Weight: approx. 10,000 kg Materials: PET bottles, cardboard, paper, film An operating manual and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: not inspected (used), functionality: unexamined, Harris TGS 215 3-RAM metal baler, 16” square with 600kw hydraulic power pack and hopper Video of baler in operation available on request, further details and photos to follow Machine decommissioned Hjdew E Htuspfx Acqjnr

Condition: ready for operation (used), Year of construction: 2012, Brand: DIXI Model: 60 SD Year of manufacture: 2012 Pressing force: 60 tons Voltage: 400 Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Hnjdpfezuxrxsx Acqsr Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Dimensions of the feed opening: 115 cm wide x 80 cm deep x 55 cm high The DIXI 60 SD features simple operation, an automatic start function, and automatic bale ejection. Thanks to its compact, low-profile design, this machine is ideal for spaces with limited height.

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 Hodpfx Acszuxqheqsnr Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without sacrificing pressing power.

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Hodpfx Aozqr Niocqsnr Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), Year of construction: 2021, operating hours: 450 h, functionality: fully functional, Vertical Baler HSM V-Press 860 plus, Year of Manufacture: 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year of Manufacture: 2021 Operating Hours: 450 Pressing Force: 60 t Drive Power: 4 kW Feed Opening: 1195 x 645 mm Filling Height: 1114 mm Bale Size: approx. 1200 x 1200 x 780 mm Bale Weight: 480 kg Binding: manual Theoretical Cycle Time (idle): 25 s Theoretical Throughput: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, Paper, Cardboard Hnsdpfx Acszqr Iroqer Comment: The baler is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We accept no liability for the accuracy of the information provided or for any possible errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment condition is 100% advance payment.

Condition: used, Year of construction: 2018, Avermann baling press, type AVOS 1810 BRK-90/100, year of manufacture 2018, cross-tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of the feed hopper: 1,800 x 1,000 mm Throughput capacity at 35 kg/m³: 15.0 t/h Throughput capacity at 60 kg/m³: 20.0 t/h Throughput capacity at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, depending on the material Tying: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Machine weight: approx. 29,000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. Hnjdpezqc Ngsfx Acqjr The offer is non-binding, subject to prior sale and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: ready for operation (used), Press force: 420kN, specific pressing force: 60N/cm², motor power: 22kW, max. theoretical throughput: 2000kg/h, filling height: 950mm, bale dimensions: 1000x720x1200mm, max. bale weight: 600kg, width: 2000mm, height: 2150mm. An on-site inspection is possible. Hsdpfezk Narsx Acqenr

Year of construction: 2020, condition: ready for operation (used), A paper and cardboard baling press Bema is available. Motor power: 2.2kW, pressing force: 20t, opening dimensions X/Y: 596mm/1200mm, bale dimensions X/Y/Z: 1200mm/800mm/1000mm, max. bale weight: 300kg, cycle time: 40s, hydraulic oil filling: 24l, machine dimensions X/Y/Z: approx. 1800mm/1100mm/1950mm, weight: approx. 1150kg. Documentation available. An on-site inspection is possible. Hodszfp Hzepfx Acqenr

Condition: used, Year of construction: 1993, Location: Malta Presona LP 50 VH Hydraulic Baler Hodszhpa Topfx Acqonr Presona LP 50 VH fully automatic horizontal hydraulic baler available for sale. The machine includes a hydraulic power unit, an automatic wire tying system, PLC controls, a pre-press and main press assembly. Suitable for OCC, paper, plastics, and industrial recyclables. Conveyor system not included. Sale Includes: Presona LP 50 VH horizontal baler Hydraulic unit Main press system Pre-press system Friction channel Automatic wire tying system Needle assembly PLC control system Hydraulic power pack Electrical control cabinet Bale ejection system Not Included: Conveyor system Machine Overview Main Technical Specifications Specification Details Manufacturer: Presona AB Model: LP 50 VH Machine Type: Fully Automatic Horizontal Hydraulic Baler Maximum Hydraulic Pressure: 25 MPa Press Force: 500 kN Power Supply: 220–600V AC, 3 Phase Control Voltage: 24V DC PLC Bale Weight: Up to approx. 800 kg Strapping: Automatic Multi-Wire Tying Operation: Continuous Automatic Operation Materials Suitable for Baling: OCC / cardboard, Waste paper, Newspapers & magazines, Plastics, Packaging waste, General recyclable materials Main Features: Hydraulic Pressing System Heavy-duty hydraulic main press Hydraulic pre-press system Adjustable friction channel pressure Continuous compaction operation Automatic Wire Tying Fully automatic multi-wire tying Hydraulic needle assembly Wire twisting and cutting system PLC Controlled Automatic operating cycles Error monitoring system Programmable material settings One-man operation capability Hydraulic Unit: The hydraulic system includes: Hydraulic pumps Oil tank Pressure regulation valves Oil filters Pressure transmitter Oil temperature monitoring Optional systems mentioned in the manual: Oil cooler Oil pre-heater Remote display Automatic Bale Tying System: The LP 50 VH features: Hydraulic needle assembly Automatic wire feeding Automatic twisting and cutting Multi-wire bale securing system Ideal Applications: Recycling facilities Waste transfer stations Cardboard recycling operations Plastic recycling plants Industrial waste processing Distribution & logistics centres Storage location: Customer

Year of construction: 2004, condition: ready for operation (used), Connected load: 15.5kW, weight: 6.8t. Hnedpsip D Rzefx Acqsr

Year of construction: 2016, condition: ready for operation (used), Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h. Hsdpfeirakgex Acqsnr

Condition: ready for operation (used), Pressing force: approx. 700 kN (approx. 70 tons) Motor power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Single bale weight: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m in length, 2.5 m in width, approx. 2.6 m in height Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Construction features Hodpera Dddsfx Acqonr large feed opening for cardboard possibility of automatic feeding (e.g., via conveyor) manual wire tying (4 wires) pallet lock and hydraulic doors for bale removal Advantages of this press large bales = fewer transports high pressing force suitable for continuous operation Available production years: 2018–2020

Year of construction: 2008, condition: good (used), Horizontal baling press Build in 2008 Bale size 800x1000x1400 Hsdpog Ibt Nofx Acqjnr Loading height 1250mm

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 105102558/89, overall weight: 750 kg, Continuously fillable compactor with rotating roller collects, shreds, and compacts waste using a special steel roller, which ensures a compaction ratio of up to 9:1. It compacts the waste through alternating left/right rotation of the special roller, which continuously applies pressure to the material being fed in. It enables continuous feeding – the compacted waste remains in a transparent PE bag. The compaction station can be installed directly at the point of waste generation within the premises. It is also ideal for continuous filling via chutes or conveyor belts and is easy to operate. CE standards requires particularly little maintenance. Hedpfx Acezr H Agsqjnr

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1737/02, overall weight: 1,995 kg, This multi-chamber baling press compacts a wide variety of materials. This top-loading press is ideal for paper, plastic, metal cans, and plastic packaging. Hnsdpezr Hxzsfx Acqsr

Condition: like new (used), Year of construction: 2023, operating hours: 16 h, Cardboard or raw material press – like new For sale: a like-new raw material press for compressing cardboard. The press was originally purchased for compressing cardboard. However, after commissioning, the supplier switched to a different type of packaging, meaning the press was no longer needed. Condition: Like new Not used or only used minimally Ready for immediate use This is an ideal opportunity to acquire a high-quality machine in like-new condition. Hjdpfezdrf Rox Acqonr I have attached the original invoice in the documents below.

Condition: good (used), For sale: HSM 500.1 VL baling press, needs repair or can be sold for parts. Hnjdpfx Acsv Alacoqer

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Channel Bale Press Presto HPK 50 HS, Year of Manufacture: 2014 Manufacturer: Presto Model: HPK 50 HS Year: 2014 Drive Power: 30 kW Pressing Force: 50 t Operating Hours: 7,145 Feed Opening: 1600 x 650 mm (LxW) Channel Cross-Section: 700 x 950 mm Hnjdpfx Acszk Drvsqer Max. Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput Performance at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET bottles Note: All knives and counter-knives as well as all sliding plastics have been replaced. The press is in good condition and has been checked and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Please note: All technical data is based on information provided by the manufacturer. We do not assume liability for the information provided or for possible errors. This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is made against advance payment, ex works, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical baling press Dixi 50 S, year of manufacture 2019, in very good condition Hodpfx Acozk Dqfeqsnr Technical data Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S Year of manufacture: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing time: 23 s Feed opening: 1200 x 620 mm Feed height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow containers, big bags, textiles, film, polystyrene, non-woven fabric, glass wool, etc. Note: The machine is in very good condition. It has been inspected and tested by us in 28816 Stuhr. The video can be found on our website or our YouTube channel. The operating manual and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors. The offers are subject to change, sale is subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale takes place ex works, without warranty.