Draw press buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
8
Manufacturer Bollegraaf, Appingedam / Netherlands Type HBC 80 AK Year of construction 1998 Hours of operation 32.984 h Press power of main press 78 t Press power of pre-press 45 t Drive power 45 kW Total power input 60 kW Feed channel 1.500 x 1.100 mm Bale size 1.100 x 720 mm at variable length Bale weight 500 – 850 kg, depending on material Tying system 8-fold cross tying (5 vert./3 hor.), fully automated Capacity per press cycle 2,9 cbm Theoretical cycle time 22 sec. Volume capac... more
1
table surface area 1000x1000 mm stroke 300 mm throat 450 mm distance table/blankh.,max. stroke up,adjustm. up 580 mm die cushion capacity 20 t die cushion stroke 300 mm feed down 400 mm/sec 9i3xie2ws feed up 400 mm/sec table height 1350 mm surface of drawing cushion durchmesser 350 mm total power requirement 55+11 kW weight of the machine ca. 19,5 t dimensions of the machine ca. 1,5x3,5x4,6 m pressure 160 t mech. Counter, two-hand control, blankloader + gripper feeder - SPA with oilhydr. Dri... more
5
pressure: 250 t Bas2b8e88w throat: 420 mm stroke: 500 mm daylight dimension with clamping plate Slide/ up: 720 mm daylight dimension with clamping plate Slide/ low: 220 mm table: 1050x800 mm clamping plate: 1030x800 mm ram surface area: 1030x630 mm die cushion hydr. pressure/stroke: ca.63/ca.120 dimension machine [...]: 2,77x1,48x4,42 m total power requirement: ca. 60 kW weight of the machine ca.: 24 t dimensions electric cabinet LxWxH: ca. 1,5x0,5x2,3 m incl. electric cabinet 001-2 (24425) sal... more
3
pressure: 630 t slide stroke: 900 pass through width: 3240 mm dayligth: 1800 mm die cushion stroke: 400 mm die cushion capacity: 250 t table-size: 3200x1900 mm clamping surface ram: 3200x1600 mm height over floor: 7000 mm work speed: 16-24 mm/sec rapid traverse - up: 400 mm/sec rapid traverse - down: 250 mm/sec total power requirement: 117 kW weight of the machine ca.: ca. 152 t Yt8tvyp8 space requirements of the machine approx.: m double action drawing Press slide cushion stroke 160mm punching... more
1
pressure:63 t Y7kawxtg2 throat: mm stroke:500 mm return speed:9 m/min pre-running speed:3180 mm/min distance table/ram:630 mm table surface area:630 x 500 mm operating pressure:125 kp/cm2 rated current:18 A three phase 1,2,3 phases:380 V total power requirement:8 kW weight of the machine ca.:2,6 t dimensions of the machine ca.: m more
2
pressure:63 t throat: mm stroke:500 mm return speed:9 m/min pre-running speed:3180 mm/min distance table/ram:630 mm table surface area:630 x 500 mm operating pressure:125 kp/cm2 Y7kejfwxh rated current:18 A three phase 1,2,3 phases:380 V total power requirement:8 kW weight of the machine ca.:2,6 t dimensions of the machine ca.: m more
4
pressure 600 t Bbbtsx8eeh distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled total power requi... more
4
pressure 800 t distance between columns 3160 mm stroke 1100 mm distance table/blankh.,max. stroke up,adjustm. up 1900 mm Bbbtturvak table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement kW weight of the mac... more
4
pressure 800 t distance between columns 3160 mm stroke 1100 mm Nacml distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement kW weight of the machine ... more
4
pressure 600 t distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled total power requirement kW ... more


draw press
every day

New machines via email!

Be informed!
5
pressure of return-stroke:1600 kN die cushion:800 kN pressure of blank holder:800 kN stroke of slide:700 mm drawing stroke:250 mm stroke of blankholder:400 mm Mey7d dayligth:1100/1400 mm table-size:1000 x 1000 mm table height:750 mm dimensions of the machine ca.:2,3 x 1,2 x 5,3 m more
5
pressure:500 t distance between columns: mm stroke:500 mm Controls:. -----: PRESS DESIGN: - frame design : H-frame : - openings in uprights : yes : - moving bolster : yes : PRESS FORCES: - total force (nominal):500 to PRESS TABLE: - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm RAM: - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm - stroke:500 mm - number of strokes max:20 /... more
4
pressure 800 t distance between columns 3160 mm stroke 1100 mm distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm Iwfh33n die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement kW weight of the machin... more
4
pressure 600 t distance between columns 2600 mm stroke 900 mm Bbbttbpjyi distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled total power requi... more
4
pressure 800 t distance between columns 3160 mm stroke 1100 mm distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm Juuqym die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement kW weight of the machine... more
4
pressure 800 t distance between columns 3160 mm stroke 1100 mm distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled Bbbttlapmj die-cushion inside the table hydraulic, controlled total power requirement kW weight of the mac... more
1
pressure 1600 t distance between columns 3160 mm ram stroke 1450 mm distance table/blankh.,max. stroke up,adjustm. up 2250 mm Beuranqo table surface area 4000 x 2200 mm ram pressure 1000 t pressure of blank holder 600 t stroke of blankholder at the bottom 1000 mm stroke of blankholder with adjustment 0-100 mm 1450 mm blank holder size 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 275 / 400 mm ram surface 4000 x 2200 mm column travel -side 1100 mm ... more
2
pressure 160 t throat 360 mm stroke 560 mm total power requirement 33 kW Maqgn weight of the machine ca. 6000 kg dimensions of the machine ca. 2000x2400x3650 mm more
5
Multi function punch, punch, hole punch, pneumatic punch – Schüco base press 280 226 die 282 870 System hardware / profile system Royal S65/S70/S75 and Royal C dimensions 410/460/H450 mm Bagdhqefoi Weight 104 kg more
1
pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled Fyp9yi8yq die-cushion in pusher hydraulic, controlled Cut Shock absor... more
1
pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm Bbbtvxj3mr die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Cut Shock abso... more
1
pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Bbbtwa2cas Cut Shock abso... more
1
pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Cut Shock absorption hydra... more
1
pressure 2000 t distance between columns 4150 mm ram stroke 1450 mm distance table/ram, max. stroke up, adjustment up 2750 mm ram pressure 1300 t pressure of blank holder 700 t 1000 mm 1450 mm blank holder size 4000 x 2200 mm ram surface 3200 x 1650 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 275 / 400 mm column travel -side 1100 mm total power requirement kW weight of the machine ca. 350 t dimensions of the machine ca. m Bbbtwkmhut The machine was o... more
3
pressure 800 t distance between columns 2000 mm stroke 600 mm table-size 1800 x 1400 mm ram surface 1800 x 1400 mm distance table/ram min/max. 400/800 mm ram adjustment 400 mm no. of strokes 14 - 20 Hub/min die cushion capacity table 80 t 32 t total power requirement 135 kW Uqvzzhd8u weight of the machine ca. 136 t dimension of the press 3,20 x 1,60 x 9,20 m = complete stamping line with decoiler and combined straightening and feed unit more
3
Moovit Pressomat 100 Make: Häfele Sedsrvufb Frames guidance system for a fast assembly of Moovit drawers - stretching of frames, bottom and back side at the same time more
pressure:500 t distance between columns: mm stroke:500 mm Controls:SIEMENS SIMATIC S 7 -----: PRESS DESIGN: - frame design : H-frame : - moving bolster : yes : PRESS FORCES: - total force (nominal):500 to PRESS TABLE: - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm RAM: - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm - stroke:500 mm V8jbs - number of strokes max:20 /min DIE C... more
1
GO 2005 Pressing force: 250 t Table: 1575 x 1150 mm Max. ram stroke : 250 mm Ram adjustment: 100 mm Shut height : 750 mm Ram dimensions : 1380 x 850 mm Ikben29v Engine power : 28 kW Machine dimensions: ( l x w x h)2800 x 1240 x 4450 mm Machine weight : 23400 kg more
5
pressure 200 t distance between columns 1600 mm L0s2v stroke mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
3
pressure:25 t throat:260 mm stroke:500 mm die cushion capacity:10 t Y7ks3pkmy die cushion stroke:200 mm Size of table plate:500 x 500 mm total power requirement:11 kW weight of the machine ca.:3 t dimensions of the machine ca.:1,40 x 1,10 x 2,80 m more
4
pressure:63 t Ftzitit throat:290 mm stroke:600 mm ram surface:450 x 450 mm table-size:560 x 560 mm hole in the table:130 mm total power requirement:4 kW dimensions of the machine ca.:2,9 x 1,8 x 1,7 m more
5
ram pressure:400 Mp Ik7d80zfi Pressure attenation:200 Mp die cushion:60 Mp Drawing cushion:900 mm Ram stroke:30 mm die cushion stroke:200 mm Installation hight, ram and table:1400 mm Workspace table:1400 x 2000 mm Ram workingspace:1400 x 2000 mm Die cushion workspace:650 x 1500 mm Demand for oil:4000 L Connection value:270 kW voltage:380 V Shipping weight:52 to height:6600 mm width:2010 mm length:3900 mm working feed:60 mm/sec feed up:450 mm/sec feed down:500 mm/sec Year:Überholt 2000 1972 Ser... more
5
pressure:100 t throat:360 mm stroke:560 mm table surface area:800 x 710 mm die cushion capacity:40 t dayligth:800 mm table height above floor:800 mm rapid traverse - down:400 mm/sec rapid traverse - up:370 mm/sec work speed at full pressure:65 / 17 mm/sec Meza2 total power requirement:35 kW weight of the machine ca.:9,5 t dimensions of the machine ca.: m more
6
pressure 1350 t distance between columns 2100 mm ram stroke 1300 mm pressure of ram 450 t Yku2yhxhe pressure of blank holder 900 t stroke of drawing ram 1300 mm stroke of blankholder 1300 mm ram surface 2100x2100 mm table surface area 2100x2100 mm closing speed 250 mm/sec working feed 21 mm/sec return speed 200 mm/sec return capacity 110 t pressure of ejector 100 t ejector speed 2500 ejector stroke 600 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m... more
5
pressure 160 t distance between columns 750 mm stroke 150 mm dayligth 450 mm table surface area 650x650 mm table hole 150 mm distance between columns 250 ram head dimension 700x650 mm total power requirement 15 kW Uhwsop7g2 weight of the machine ca. t dimensions of the machine ca. 1,5x1,4x2,9 m more
1
pressure 63 t distance between columns 650 mm stroke 200 mm total power requirement 30 kW weight of the machine ca. t dimensions of the machine ca. m Mskvjs more
2
pressure 125 t distance between columns 1050 mm stroke 250 mm total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m Wpp03iuh more
3
pressure:500 t distance between columns: mm stroke:500 mm Controls:. -----: PRESS DESIGN: - frame design : H-frame : - openings in uprights : yes : - moving bolster : yes : PRESS FORCES: - total force (nominal):500 to PRESS TABLE: - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm RAM: - ram force:500 to - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm - stroke:500 mm - numbe... more
1
pressure:500 t distance between columns: mm stroke:500 mm Controls:. -----: PRESS DESIGN: - frame design : H-frame : - openings in uprights : yes : - moving bolster : yes : PRESS FORCES: - total force (nominal):500 to PRESS TABLE: - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm RAM: - ram force:500 to - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm - stroke:500 mm - numbe... more
pressure:500 t distance between columns: mm stroke:500 mm Controls:. -----: PRESS DESIGN: - frame design : H-frame : - openings in uprights : yes : - moving bolster : yes : PRESS FORCES: - total force (nominal):500 to PRESS TABLE: - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm RAM: - ram force:500 to - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm - stroke:500 mm - numbe... more
1
pressure:40 t distance between columns:600 mm stroke: mm ram power:40 Mp max. ram stroke:160 mm dayligth:360 mm table-size:560x400 mm T-slots:18 mm ram hole:40 mm table height:950 mm Mskwyo Total height:2540 mm length in width:1440 mm power capacity:5,5 kW centering bore - table plate:100 mm depth:1100 mm column depth:950 mm oil box capacity:250 l total power requirement:ant kW weight of the machine ca.: t dimensions of the machine ca.: m 100 % before loading warranty: none used double colum... more
4
pressure: 25 t stroke: (Stößel) 450 mm throat: 315 mm die cushion capacity: 10 t die cushion stroke: 200 mm table surface area: 600x600 mm clamping plate on table: 580x580x280 mm distance between clamping plate + ram: 650 mm height over floor: 700 mm die-cushion surface: 300x200x400 Cehcq33lg clamping surface ram: 350x350 mm passage diameter: Ø 80 mm passage opening in table: Ø 315 mm ram speed - forward: 9 cm/s ram speed - reverse: ca. 28 cm/s return force : 10 t total power requirement: 5,5 k... more
4
pressure: 250 t slide stroke: 40-160 mm throat: 545 mm stroke: - mm Table dimensions: 1250x800x100 mm drawing capacity: 16 to table height over floor: 1000 mm ram adjustment: 110 mm surface area of ram: 900x670x100 mm dayligth: 560 -660 mm distance between columns: 500x400 mm force of ejector: 16 Mp total power requirement: 23 kW 7nlijmee3 weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m ejector and counter holder = 16t tab... more
3
pressure:500 t distance between columns: mm stroke:500 mm Controls:. -----: PRESS DESIGN: - frame design : H-frame : - openings in uprights : yes : - moving bolster : yes : PRESS FORCES: - total force (nominal):500 to PRESS TABLE: - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm RAM: - ram force:500 to - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm - stroke:500 mm - numbe... more
3
Pressure 100 t Ejector in ram 10 t Throat 420 mm Stroke 600 mm Table surface area 980 x 750 mm Ram surface area 980 x 750 mm Cushion in table 50 t Cushion stroke 250 mm Cushion surface 600 x 650 mm Approach Speed 480 mm / sec. Fwzflpf Working speed 20 – 61 mm / sec. Return speed 470 mm / sec. Daylight ca. 900 mm Table height over floor 985 mm Required power 22 kW Dimensions 980 x 2050 x 3800 mm Weight ca. 10,5 t more
3
Pressure 100 t Ejector in ram 10 t Throat 420 mm B7thfhdg Stroke 600 mm Table surface area 980 x 750 mm Ram surface area 980 x 750 mm Cushion in table 50 t Cushion stroke 250 mm Cushion surface 600 x 650 mm Approach Speed 480 mm / sec. Working speed 20 – 61 mm / sec. Return speed 470 mm / sec. Daylight ca. 900 mm Table height over floor 985 mm Required power 22 kW Dimensions 980 x 2050 x 3800 mm Weight ca. 10,5 t more
2
Cost drawing press hydraulic Manufacturer: Müller Weingarten Type: CEZ 40.25.6 Year of construction: 1985 Pressure: 40 to Throat depth: 285 mm Stroke: 500 mm Distance table/slide: 630 mm Table area: 560 x 560 mm Drawing cushion pressure in the table: 16 to. Drawing cushion stroke in the table: 200 mm Bzvgh0n7o Drawing pad area: 425 x 425 mm Table height above floor: 800 mm Tappet surface: 450 x 450 mm Oil content: 380 l Power: 11 kW Weight: 4.5 to. Space requirements: 1, 3 x ... more
6
 Start Chat

Hydr. Double column drawing press 500 t SMG HZPU 500-2100/1500

Gießen Germany
6533 km
1971
used
For sale comes from a change of the production: 1 x SMG HZPU 500-2100/1500 hydraulic drawing press used, good condition can be seen under power. expected to be available summer 2018 Facilities: UVV compliant facilities 2-hand operation extensive technical documentation Technical data: Year of construction: 1971 2q0gmq Pull plunger pressure: 500 t Max pull piston stroke: 600 mm Distance table / pull plunger up: 800 mm clearance between the stands: 2110 mm Table and pul... more
5
Pressure 100 t Ejector in ram 5 t Throat 320 mm Ram stroke 300 mm Ejector stroke 50 mm Ram adjsutment 150 mm Daylight 500 mm Table surface area 1000 x 600 mm Ram surface area 600 x 320 mm Table height over floor ca. 950 mm Approach speed 400 mm / s Working speed 50 mm / s 2cfyhf7n Return speed 400 mm / s Cushion in table 25 t Cushion stroke 100 mm more
6
TECHNICAL DATA: B03zre2u Press length: 1500 mm Press hight: 100 mm Processing: pneumatic more


draw press
every day

New machines via email!

Be informed!

to

to

Change search
DRAW PRESS
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close