Deep drawing press buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
2
Hydraulic four column deep drawing press serial. HYMAG type MSP 6 SK ZA 32 Masch. # 558/14, built in 1972 Technical data: Pressure capacity 30 t Pressure power pull cylinder 10 t Drawing cushion stroke 100 mm Height 500 mm Lift the pusher plate 200 mm Passage between the columns front 400 mm Continuity betw. d. pillars side 300 mm Table size 400 x 520 mm Drawing cushion dimensions 400 x 400 mm Hg8ygdrvi Power 10 HP Speed down 50 mm/sec. Speed up minimum 15.8 mm / sesk. Speed up ... more
6
pressure 1350 t distance between columns 2100 mm ram stroke 1300 mm pressure of ram 450 t pressure of blank holder 900 t stroke of drawing ram 1300 mm stroke of blankholder 1300 mm ram surface 2100x2100 mm table surface area 2100x2100 mm closing speed 250 mm/sec working feed 21 mm/sec return speed 200 mm/sec return capacity 110 t pressure of ejector 100 t Yku2yhxhe ejector speed 2500 ejector stroke 600 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m... more
4
gebr. Hydr. Double column deep drawing press make LAUFFER Model RZU-100.-Nr: 13710 year 1991 To print power 100 Retraction force 20 to Piston stroke 800 mm Height 1200 mm Stand passage 1020 mm Top 1000 x 850 mm Plunger area 1000 x 800 mm Hydr. Ejector in the RAM: Ejector force 6.3 to Ejector stroke 250 mm Auswerfer-Ø 150 mm Speeds: Rapid traverse max. 500 mm / S Press at 100% force 97/43 mm / S Return 480 mm / S Hydr. Cushions/ejector in the table: To pull p... more
6

Deep drawing presses Krupp PDq 2-135

Etten-Leur, NetherlandsNetherlands dealership location
6240 km
1966
used
Deep drawing presses Make: Krupp Type: PDq 2-315 Capacity: 315 ton Table: 3.100 x 1.800 mm Stroke: 300 mm Year of make: 1966 Ram adjustment: 0 - 200 mm B3s7ufd Number of strokes per minute: 15-30 Boring between Columns: 3.200 mm Installation height: 900 mm More techn. details in attachement With decoiler With Straightener With feeding attachement Stock Number: pers306 more
2
Table: 2050 x 1100mm, die cushion aperture: 900mm, separate Chrubasik die cushion. 7d8rd7fl0 more
5
Double column hydraulic deep drawing press Fabr SMG type HZPR 670/426 60-650/550 Machine, built in 1955 Specifications: Max. Pressure 60 t table size 650 x 550 mm table with 4 T-slots on table clamped plate 350 x 330 mm, ram size 650 x 550 mm stem with 4 T-slots inside width between columns 650 mm max. Distance between table and ram about 840 mm Column diameter 160 mm above ground external dimensions 1500 x 1400 x 3500 mm with: - SICK protective equipment, cultivated in 1971 - rear guard Urjtmu... more
6

Deep drawing press Fjellman 2400 ton

Etten-Leur, NetherlandsNetherlands dealership location
6240 km
used
Deep drawing presses Make: Fjellman 2400 TON Capacity: 2.400 TON Table: 1.100 x 6.200 mm Stroke: 1.100 mm Daylight: 1.400 mm Distance between columns: 2.150 mm Floor surface: 6.200 x 3.150 mm Total power: 110 kW electrical engines: 3 x 37 kW Pressingspeed: Closing: 250 mm/sec X7zbrt8r Pressing: 0,5-4 mm/ sec (adjustable) Breaking: 0-24 mm/ sec (adjustable) Opening: 132 mm/ sec Stock Number: pers266 more
2
Table: 2050 x 1100mm, aperture with die cushion: 950mm, seperate Chrubasik die cushion, automatic charging. Ms3x2 more
1

Deep drawing press SMG DS100

Etten-Leur, NetherlandsNetherlands dealership location
6240 km
used
Cap.: 100 ton Table: 640 x 503 mm Daylight: 430 mm Nqsrmf Speed of hydr. cilinder; 300 mm/sec more
3
pressure 800 t distance between columns 2000 mm stroke 600 mm table-size 1800 x 1400 mm ram surface 1800 x 1400 mm distance table/ram min/max. 400/800 mm ram adjustment 400 mm no. of strokes 14 - 20 Hub/min die cushion capacity table 80 t 32 t total power requirement 135 kW Uqvzzhd8u weight of the machine ca. 136 t dimension of the press 3,20 x 1,60 x 9,20 m = complete stamping line with decoiler and combined straightening and feed unit more


deep drawi...
daily

New machines via email!

Stay updated!
1

Hydraulic drawing press Dieffenbacher DT II 160/60

Schwäbisch Gmünd , GermanyGermany
6698 km
1977
ready for operation (used)
DIEFFENBACHER -160 t v. top -60 t v. down Hydraulic drawing press DT II 160/60 34 KW Operating pressure 250 bar Height 1100 mm Piston diameter 280 mm Stroke 600 mm Bcopelg7ze Weight 17 t more
2

Cost drawing press hydraulic Mueller Weingarten CEZ 40.25.6

Nürtingen, GermanyGermany dealership location
6677 km
1985
good (used)
Cost drawing press hydraulic Manufacturer: Müller Weingarten Type: CEZ 40.25.6 Year of construction: 1985 Pressure: 40 to Throat depth: 285 mm Stroke: 500 mm Distance table/slide: 630 mm Table area: 560 x 560 mm Drawing cushion pressure in the table: 16 to. Drawing cushion stroke in the table: 200 mm Drawing pad area: 425 x 425 mm Table height above floor: 800 mm Tappet surface: 450 x 450 mm Oil content: 380 l Power: 11 kW Weight: 4.5 to. Space requirements: 1, 3 x 2, 0 x 3, 0... more
5

Drawing Press - [...] MÜLLER CAZ 250.3.1

Leipzig, GermanyGermany dealership location
6734 km
1967
used
pressure: 250 t throat: 420 mm stroke: 500 mm daylight dimension with clamping plate Slide/ up: 720 mm daylight dimension with clamping plate Slide/ low: 220 mm table: 1050x800 mm clamping plate: 1030x800 mm ram surface area: 1030x630 mm die cushion hydr. pressure/stroke: ca.63/ca.120 dimension machine [...]: 2,77x1,48x4,42 m total power requirement: ca. 60 kW Bas2b8e88w weight of the machine ca.: 24 t dimensions electric cabinet LxWxH: ca. 1,5x0,5x2,3 m incl. electric cabinet 001-2 (24425) sal... more
3
pressure:500 t distance between columns: mm stroke:500 mm Controls:. -----: PRESS DESIGN: - frame design : H-frame : - openings in uprights : yes : - moving bolster : yes : PRESS FORCES: - total force (nominal):500 to PRESS TABLE: - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm RAM: - ram force:500 to - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm Bcorpe8b39 - stroke:500 ... more
4

Double Column Drawing Press -Hydr. MÜLLER ZE 600 25.4.3

Unterschleißheim, GermanyGermany dealership location
6842 km
1974
used
pressure 600 t distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm Bbbtsx8eeh column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled total power requi... more
3
pressure:600 t distance between columns:2050 mm stroke: mm weight of the machine ca.: t dimensions of the machine ca.: m total power requirement: kW pressure of blank holder:160 t Bbwymwgxdh capacity of ejector:9 x 10 t stroke of drawing ram:900 mm stroke of blankholder:200 mm ejector stroke:200 mm max. ram stroke:900 mm table-size:2000 x 1600 mm daylight:1150 mm height over floor:6795 mm Retrofit 1997/1998 more
1
pressure:40 t distance between columns:600 mm stroke: mm ram power:40 Mp max. ram stroke:160 mm dayligth:360 mm table-size:560x400 mm T-slots:18 mm ram hole:40 mm table height:950 mm Total height:2540 mm length in width:1440 mm power capacity:5,5 kW centering bore - table plate:100 mm depth:1100 mm Mskwyo column depth:950 mm oil box capacity:250 l total power requirement:ant kW weight of the machine ca.: t dimensions of the machine ca.: m 100 % before loading warranty: none used double colum... more
2
pressure 160 t throat 360 mm stroke 560 mm total power requirement 33 kW Maqgn weight of the machine ca. 6000 kg dimensions of the machine ca. 2000x2400x3650 mm more
3
pressure: 630 t slide stroke: 900 pass through width: 3240 mm dayligth: 1800 mm die cushion stroke: 400 mm die cushion capacity: 250 t table-size: 3200x1900 mm clamping surface ram: 3200x1600 mm height over floor: 7000 mm work speed: 16-24 mm/sec rapid traverse - up: 400 mm/sec rapid traverse - down: 250 mm/sec total power requirement: 117 kW weight of the machine ca.: ca. 152 t space requirements of the machine approx.: Höhe: ca. 7,0 m double action drawing Press slide cushion stroke 160mm punc... more
5
pressure:500 t distance between columns: mm stroke:500 mm Controls:. -----: PRESS DESIGN: - frame design : H-frame : - openings in uprights : yes : - moving bolster : yes : PRESS FORCES: - total force (nominal):500 to PRESS TABLE: - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm RAM: - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm - stroke:500 mm - number of strokes max:20 /... more
4

Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.2

Unterschleißheim, GermanyGermany dealership location
6842 km
1972
used
pressure 800 t distance between columns 3160 mm stroke 1100 mm distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled Juuqym total power requirement kW weight of the machine... more
5
pressure 200 t distance between columns 1600 mm stroke mm L0s2v total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
5

Hydraulic drawing press MOSSINI PO/AC 125

Sonnenallee 7, 34233 Fuldatal, DeutschlandGermany
6557 km
2002
excellent (used)
A used very well-preserved hydraulic drawing press with two-hand control, light curtain and cooling unit. Last uvv testing machine and BWS 30.11.2017 Force 1250kN (125 tons) Bb3zrmx3hk Plunger lift 630 mm Working speed 25 / 50 mm / sec. Rapid traverse 355 mm / sec. More tech. Data see PDF document more
2
pressure 125 t distance between columns 1050 mm stroke 250 mm Wpp03iuh total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m more
4
Cehcq33lg pressure: 25 t stroke: (Stößel) 450 mm throat: 315 mm die cushion capacity: 10 t die cushion stroke: 200 mm table surface area: 600x600 mm clamping plate on table: 580x580x280 mm distance between clamping plate + ram: 650 mm height over floor: 700 mm die-cushion surface: 300x200x400 clamping surface ram: 350x350 mm passage diameter: Ø 80 mm passage opening in table: Ø 315 mm ram speed - forward: 9 cm/s ram speed - reverse: ca. 28 cm/s return force : 10 t total power requirement: 5,5 k... more
3
pressure:500 t distance between columns: mm stroke:500 mm Controls:SIEMENS SIMATIC S 7 -----: PRESS DESIGN: - frame design : H-frame : - moving bolster : yes : PRESS FORCES: - total force (nominal):500 to PRESS TABLE: - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm RAM: - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm - stroke:500 mm - number of strokes max:20 /min DIE CUSHION ... more
4

Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.1

Unterschleißheim, GermanyGermany dealership location
6842 km
1972
used
pressure 800 t distance between columns 3160 mm stroke 1100 mm distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement kW Iwfh33n weight of the machin... more
10
4 press (1 to 3 and 5) Bcaf8c7e9b -Plants are not in the dismounted State. -Plants are sold as seen and no liability. -The equipment not sold separately. -Disassembly / transport costs of facilities must be borne by the purchaser. -Dismantling and removal of the equipment is carried out under the responsibility of the purchaser -Equipment safety-no function warranty pick up,. -On-site inspection is mandatory. more
15

Double column drawing press 800 t Kieserling SKPN 800/2000

Margaretenhütte 57, 35398 Gießen, DEGermany
6540 km
1960
excellent (used)
used, good condition from production: 1 x Kieserling SKPN 800/2000 double column drawing press Machine is still under power and can be visited by prior arrangement in production. Scope of delivery: 1 x Kieserling SKPN 800/2000 double upright eccentric press GPA tooling plate for ejection plates Schleicher coil + straightening machine specifications: Year of construction: 1960 - regularly overhauled and serviced Pressure force of the plunger: 800 t tappet surface approx. 1800 x 1400 ... more
1
pressure 63 t distance between columns 650 mm stroke 200 mm total power requirement 30 kW weight of the machine ca. t Mskvjs dimensions of the machine ca. m more
4
pressure: 250 t slide stroke: 40-160 mm throat: 545 mm stroke: - mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm ram adjustment: 110 mm surface area of ram: 900x670x100 mm 7nlijmee3 distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m ejector and counter holder = 16t tabl... more
3
pressure:500 t distance between columns: mm stroke:500 mm Controls:. -----: Cnn3dby0 PRESS DESIGN: - frame design : H-frame : - openings in uprights : yes : - moving bolster : yes : PRESS FORCES: - total force (nominal):500 to PRESS TABLE: - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm RAM: - ram force:500 to - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm - stroke:500 mm... more
4

Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.3

Unterschleißheim, GermanyGermany dealership location
6842 km
1972
used
pressure 800 t distance between columns 3160 mm Nacml stroke 1100 mm distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement kW weight of the machine ... more
5

Hydraulic Straight Sided Drawing Press Müller ZE 160-10.11.10

Neuenhöhe 31, 42929 Wermelskirchen, DEGermany
6423 km
1974
excellent (used)
Force: 160 tons Nchxx Daylight: 1100mm Table: 1000x1000mm Ram: 1000x1000mm Speed Up and down: 350mm/sec. Stroke: 600mm Die cushion: 63 tons force, stroke: 250mm Requested power: 32KW Weight: 25.000kos. Height: 4400mm siemens S7 control Sick light barriers more
6
For sale comes from a change of the production: 1 x SMG HZPU 500-2100/1500 hydraulic drawing press used, good condition can be seen under power. expected to be available summer 2018 Facilities: UVV compliant facilities 2-hand operation extensive technical documentation Technical data: Year of construction: 1971 Pull plunger pressure: 500 t Max pull piston stroke: 600 mm 2q0gmq Distance table / pull plunger up: 800 mm clearance between the stands: 2110 mm Table and pul... more
5
gebr. Hydr. Double column drawing press make SMG 9bmug3oa8 Model VZP 60/800/650 serial number: 670984-2 built in 1961 To print performance 60 Tabletop 800 x 650 mm Tappet surface 800 x 650 mm Clear distance between the posts 810 mm The maximum distance between the plunger and table 900 mm Maximum piston stroke 500 mm Max closing speed of 300 mm / S Max speed 80 mm / S Max rewinding speed 250 mm / S Retraction force 20 to Hydr. Cushions: Maximum sheet metal holder pres... more
6

DEEP DRAWING SYSTEM JUMBO 3 OFFLINE

UZWIL, SwitzerlandSwitzerland dealership location
6724 km
1972
used
Film width(mm) : 430 Film thickness (mm): 0.9 – 1.3 Work time : about 69100h Performance example: Duo-cup / 2-fold 2520 pcs./H Equpment: Incl. forklift / bracket for 2 rolls of film / Hack mill The jumbo system is an off-line system (without an extruder but from the supplied foil) Hslq93f There are 2 rolls of approx. 450kg tensioned One in processing and the second as follow-up. The residual lattice (approx. 30 to 40%) is fed directly into the mill after the die-punching. The ground material f... more
1
pressure:500 t distance between columns: mm stroke:500 mm Controls:. -----: PRESS DESIGN: Zwqbcxm2 - frame design : H-frame : - openings in uprights : yes : - moving bolster : yes : PRESS FORCES: - total force (nominal):500 to PRESS TABLE: - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm RAM: - ram force:500 to - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm - stroke:500 mm... more
1

Double Column Drawing Press -Hydr. MÜLLER ZE 1000-40.3.3

Unterschleißheim, GermanyGermany dealership location
6842 km
1973
used
pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Cut Shock absorption hydra... more
5

Hydraulic Straight Sided Drawing Press GABANDE 142/MAN

Neuenhöhe 31, 42929 Wermelskirchen, DEGermany
6423 km
1980
good (used)
Force: 200 tons Daylight: 1200mm Hsm39dn Table: 1400x1120mm Ram: 1100x1100mm Stroke: 500mm Die cushion: Force: 60tons, stroke: 400mm Requested power: 36kW Weight: 24.000kos. Height: 5200mm more
6
For sale comes from a production change: 1 x SMG HOPZ HOPZ 25-560/560 in the excellent, full-featured Zustand immediately, you can in our warehouse in casting visited to. The machine was in 1992 by Johannes Schaefer rebuilt (documentation exists) Scope of delivery: 1 x SMG debut drawing press as abgebildet 1 x operating instructions 1 x Hydr. / Elektroschaltplaene 1 x documentation about the Modernisierung Upper piston / plunger: Force upper Pistons, 8-210 b... more
3

Hydraulic punching and drawing press HYDRAP HPDZb 200

Ennepetal, GermanyGermany dealership location
6422 km
1992
ready for operation (used)
Hydraulic punching and drawing press Fabr. HYDRAP HPDZb 200 Foundation is required! Built in 1992 Pressure force of 2,000 kN Withdrawal force 400 kN STROKE 600 mm Height: 800 mm Table size: 1300 x 1000 mm Cushions compressive force of 1,000 kN Bblgdjioix STROKE 200 mm Ejector in the RAM Pressure power 630 kN STROKE 100 mm Cut shock damping Damping force of 2,000 kN steam stroke 15 mm machine weight: 26,000 kg. Machine can be seen under power more
2

Hydraulic debut drawing press Müller Weingarten CEZ 250 /200-20.1-U

Westhafenstraße, 13353 Berlin, DeutschlandGermany
6736 km
1984
ready for operation (used)
More info follow, reverse charging AIDS are available. Juv0ye more
pressure:500 t distance between columns: mm stroke:500 mm Controls:. -----: PRESS DESIGN: - frame design : H-frame : - openings in uprights : yes : - moving bolster : yes : PRESS FORCES: - total force (nominal):500 to PRESS TABLE: - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm RAM: - ram force:500 to - clamping surface (left-right):2800 mm - clamping surface (front-back):1800 mm - stroke:500 mm Hfnys0za... more
1

Double Column Drawing Press -Hydr. MÜLLER ZE 1000-40.3.4

Unterschleißheim, GermanyGermany dealership location
6842 km
1973
used
pressure 1000 t distance between columns 4150 mm Fyp9yi8yq stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Cut Shock absor... more
2

Hyd Drawing Press Lasco

Dortmund, GermanyGermany dealership location
6427 km
1981
used
Make: Lasco Year: 1981 Pressure capacity: 315 ton Esxhhb Piston stroke: 800 mm Towing force: 100 ton Table size: 1500 x 900 mm more
6

Bale presse with wire drawing units Paal Konti 425 C

Stuhr bei Bremen, GermanyGermany dealership location
6434 km
1993
used
Manufacturer Paal`s Packpressen-Fabrik, Germany Type Konti 425 C Year of construction 1993 Press power 100 t Specific forge pressure 12 KN/cm² Drive power 55 kW / 110 kW or 165 kW (1, 2 or 3 motors) Total connected load 198 kW Voltage rating 400 V Frequency 50 Hz Filling aperture 1020 x 2000 mm Channel cross section 750 x 1100 mm Infilling volume 1,77 cbm Idle speed capacity approx. 940 cbm Operating press capacity approx. 340 cbm Press capacity / paper, cardbd. approx. 24 t/h at bulk density o... more
5
EXNER hydraulic double column drawing press press EX SB ZR 300/60 year 1989 Pressing force: 3,000 kN Table 2000 x 1,300 mm installation height: 1,000 mm Piston stroke: 600 mm pulling pillows 2 x 60 to. 660 x 960 mm cut shock damping cushions Machine weight: CA. 48 tons. Foundation is required Hgpagtv more
3

Hydraulic debut drawing press Müller Weingarten CEZ 100.42.14

Braunschweiger Straße 62, 12055 Berlin, DEGermany
6745 km
1984
ready for operation (used)
Pressure 100 t, Reverse charging AIDS are available. Bboecbpgya more
5
Controlled hydraulic die cushion Impact damping Ram interlocking Light curtain German safety standards Pressure 250 t Die cushion pressure/stroke 40t, 150 mm Ram pressure/stroke 250 t, 300 mm Ram area 1370 x 850 mm Table area 1350 x 800 mm Distance table ram 500 mm 8wsulj2l9 Daylight 1395 mm Dimensions 3850 x 2190 x 1130 mm more


deep drawi...
daily

New machines via email!

Stay updated!

to

to

Edit search
DEEP DRAWING PRESS
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close