Used double column drawing presses for sale (37)

Condition: used, Year of construction: 1998, functionality: fully functional, Brand: TMP - TIAZHMEJPRESS - Model: KB 4043 Year: 1998 Mechanical press 2000 t. Movable table: 5000 x 2700 mm. Distance between uprights: 5120 mm. Lower and upper pneumatic cushion. Godpfx Aoyibu Rsbrstu Slide stroke: 900 mm. Slide adjustment: 800 mm. Closed press height: 1800 mm. Microinch force: 400 t. Lower cushion adjustment: 350 mm. Lower cushion force: 400 t. Upper cushion force: 200 t. Upper cushion stroke: 200 mm.

Condition: used, Year of construction: 1963, Single-column hydraulic press MÜLLER ZE 250/300-12.5 1.3-U, No. 586, year of manufacture 1963, pressing force 250 t, working area 1,300 x 1,100 x 1,000 mm, retrofitted with ROMA safety roller door (year of manufacture 2012) Godoyhqqnepfx Abrstu

Condition: used, Year of construction: 1998, functionality: fully functional, Brand: TMP - TIAZHMEJPRESS - Model: KB 4043 Year: 1998 Mechanical press 2000 t. Movable table: 5000 x 2700 mm. Distance between uprights: 5120 mm. Lower and upper pneumatic cushion. Slide stroke: 900 mm. Gtsdpfsyg E Dmjx Abrsu Slide adjustment: 800 mm. Closed press height: 1800 mm. Microinch force: 400 t. Lower cushion adjustment: 350 mm. Lower cushion force: 400 t. Upper cushion force: 200 t. Upper cushion stroke: 200 mm.

Condition: used, Year of construction: 1986, Make: MÜLLER, Model: ZE400-20.24.1, Year of manufacture: 1986, Machine No.: 498601, Max. pressure: 400 t, Clamping area (table): 2,000 x 1,300 mm, Clamping area (ram): 2,000 x 1,300 mm, Installation height min./max.: 600-1,400 mm, Ram stroke: 800 mm, Ram adjustment: 200 mm, Table draw cushion pressure: 5-160 t, Table draw cushion stroke: 350 mm, Ram draw cushion pressure: 5-40 t, Ram cushion stroke: 125 mm, 2x two-hand operation, safety guard system, press control, 2 accessory cabinets with contents. +++ Attention: This machine is part of an online auction! +++ Gjdpfox R D R Ujx Abrstu

Condition: good (used), Year of construction: 1995, table height: 950 mm, total height: 3,800 mm, table width: 1,250 mm, table length: 1,000 mm, installation height: 900 mm, pressing force: 120 t, total length: 2,100 mm, total width: 2,050 mm, control cabinet height: 1,900 mm, control cabinet length: 600 mm, control cabinet width: 500 mm, retraction force: 5 t, stroke length: 400 mm, Equipment: safety light barrier, Deep drawing press, press power 120 to, stroke 400 mm, distance between tabels 900 mm, with oil cooler, light security bareer, dimension 2100x2050x3800 mm, weight ca. 13400 kgs Gsdpfx Ajycin Ujbrotu

Condition: used, Year of construction: 2005, Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Die cushion capacity in table: 80 ton Die cushion stroke: 250 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Gtedpfx Abewnn Rtjreu Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton Standard configuration 2 cushion cylinder 2 pads

Condition: used, Pressure total: 500 ton Ram stroke: 500 mm Slide adjustment: 400 mm Daylight: 1350 mm Table surface area : 3000 x 1700 mm Slide area: 3000 x 1700 mm Die cushion capacity in table: 80 ton Die cushion stroke: 250 mm Number of strokes: 20 s.p.m. Required power: 75 kW Height over floor approx.: 8000 mm Weight of machine approx.: 160 ton Standard configuration 2 cushion cylinder 1 pad Gjdewnnanspfx Abrotu

Condition: used, Year of construction: 2005, Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton Standard configuration Godewnpavjpfx Abrstu without cushion

Condition: used, Year of construction: 1989, Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1475 mm Free frontal opening L-R: 3700 mm Free lateral opening F-B: 2300 mm Table surface area : 3600 x 2200 mm Slide area: 3500 x 2070 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Ejector in ram: 60 ton Gtodexbpb Ropfx Abrju Ejector stroke in ram: 150 mm Number of strokes: 7 - 21 s.p.m. Required power: kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Year of construction: 1981, condition: like new (used), Second hand hydraulic (triple acting) deep drawing press LAUFFER 400t. The press is already dismantled and in excellent condition as it has been little used. Technical data: Year of manufacture: 1981 Pressing capacity in t: 400 Height above floor in mm: 5940 Gtedpfod Ntd Dsx Abrou Stroke in mm: 800 Table size (lxb) in mm: 1600 x 1300 Ram size (lxb) in mm: 1500 x 1300 Daylight in mm: 850 Upper ejector stroke in mm: 160 Upper ejector force in t: 6,3 Lower ejector stroke in mm: 200 Lower ejector force in t: 12 Total power consumption in kW: 150 Overall size (lxbxh) in mm: 3550 x 1200 x 5940 Total weight in kg: 50000

Condition: reconditioned (used), Year of construction: 2002, 4200 x 2500 x 650 mm Table size The table moves 3000 mm outwards for loading For tools up to 4200x2500x1500mm Tool weight up to 40 T Speed at 700 T still 62 mm/sec, at 1200 T still 35 mm/sec. ram size is 4200x1750 mm maximum open height 2200 mm drawing cushion with 50 to 500 T Gtedpfxegphaxo Abrju drawing cushion stroke 400 mm drawing cushion size 3100x1600 mm drawing cushion speed 150 mm sec. ram drawing cushion with 150 mm stroke 1600 mm stroke 475 KW, 890 Amps 210 T machine weight new motors new control system Was used for 3 years at a German automotive company and then sold to Brazil to an auto parts manufacturer. Worked there until 2020.

Condition: used, Year of construction: 2009, functionality: fully functional, The basic Müller machine was put into operation in 1972. In 2009 it was completely overhauled by the Dunkes company. You will receive further information by e-mail. Dismantling and collection must be carried out by the buyer. Sale without guarantee or warranty and return as it is a used machine. The press is in daily use and can be inspected. Gtjdpfevb Hhlox Abrou

Condition: used, Year of construction: 1980, functionality: limited functionality, WAGNER MECHANICAL ECCENTRIC PRESS — 500 TON — DOUBLE COLUMN Brand: Wagner Model: 500-ton eccentric press Year: 1980 Mechanical overhaul: 2010 Electrical panel: overhauled 2011 Condition: partially functional Type: double column – eccentric system Strokes/min: 0–30 Ram stroke: 300 mm Ram adjustment: 140 mm Clearance at TDC: 1100 mm Front opening between uprights: 1850 mm Side window: 800 mm Table: 1800 × 1000 mm Ram: 1800 × 1000 mm Number of pressure points: 2 Ram guides: 8 Guards: front and rear Machine dimensions: 3000 × 2000 × 6000 mm Gsdpfjx A Akzsx Abretu Weight: 55 tons Foundation required: 100 cm Accessories: ELMEA L500 POWER SUPPLY feeder Status: visible in operation

Condition: excellent (used), functionality: fully functional, table height: 585 mm, die cushion stroke: 280 mm, table width: 2,900 mm, table length: 5,000 mm, installation height: 1,190 mm, pressing force: 2,000 t, die cushion force: 380 t, stroke length: 1,050 mm, The machine on offer is a hydraulic tryout press. This press underwent a comprehensive general overhaul in 2014 by a specialist company in Germany. During the overhaul, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from renowned European manufacturers were used for the refurbishment. A particular highlight of this tryout press is that both the ram and the bolster are equipped with draw cushions. The bolster is designed as a movable table. The ram can be stopped and mechanically locked in any position as required. Technical specifications: Table size: 5000 mm x 2900 mm Draw cushion size: 4200 mm x 1800 mm Draw cushion stroke: 280 mm Draw cushion force: 380 t Draw cushion operation: 4-way controlled draw cushion, compensation not required Table height above floor: 585 mm Ram size: 5000 mm x 2900 mm Ram force: 2000 t Ram cushion size: 2400 mm x 1200 mm Ram cushion stroke: 150 mm Ram cushion force: 200 t Ram return force: approx. 120 t Gedpfoxgz Rnjx Abretu Ram up position: 2350 mm Ram stroke: 1050 mm Air pins retracted by 185 mm Max. die installation height: 1190 mm Lower clamping: manual Upper clamping: manual Centering: via air pin pattern Sliding bolster: 3000 mm travel distance Ram locking: stepless Cut stroke damping: not available The above information is based on the machine documentation. The seller does not assume any liability for the completeness or accuracy of these details. The actual technical specifications and functions of the machine are decisive.

Year of construction: 1978, condition: used, pressure 2000 /1000* t distance between columns 2650 mm stroke 500 mm column travel -side 500 x 1000 mm diameter of piston 710 mm Gtedpfx Ajd Ih Ncsbrou number of pistons 2 distance between table / ram 1000 mm operating pressure 130 / 230 bar dayligth 800 mm table length 2500 mm table width 1600 mm table height 250 mm draw back pressure 500 kN number of T-slots 8 turning speeds 1500 U/min rapid speed 120 - 140 mm/min closing speed max. 120 - 140 mm/sec. return of plunger by small single cylinders 100 - 110 mm/sec hydraulical ram locking cutting sound absorber 300 t die cushion capacity 200 t die cushion stroke 250 mm speed of die cushion 100 mm/sec frequency 50 Hz voltage 380 V quantity of oil 2000 l total power requirement 93 kW weight of the machine ca. 100 t dimensions of the machine ca. 5000 x 2500 x 7200 mm transport measurements ca. 6500 x 3750 x 2190 mm 1991 assembly of a die cushion, pressure reduction to 1000 tons reason: tools were only constructed to 1000 tons press has run in a perfect condition until disassembly. It was replaced by a press line. important for UVV: press has a hydraulic ram locking!

Condition: good (used), Manufacturer CLEARING Model S4-900-180 Condition Used Stock No.0274 Thrust: 900 ton. Thrust points No. 4 Plunger Slide stroke 940 mm. Slide adjustment 762 mm. Number of strokes/min No. 16 Mold clearance at PMI 1,412 mm. Slide size 4,572 mm. x 2,438 mm. Table size 4,572 mm. x 2,130 mm, Pull-out carriage Present Useful front passage 4,622 mm. Gtsdpfx Abetzy R Nsrju Side passage in the shoulder 1,400 mm. Hydraulic Safety Present Cushion in the Basement Present Bottom plate press stroke 280 mm.

Condition: used, Thrust: 600 TON. Barbed points: no. 2 Model: AF 600 MB 30-60 Year of construction: 1994 Gtsdpfoq N Ettsx Abrsu Table size: 3,000 X 1,600 mm. Slide size: 3,000 X 1,600 mm. Front passage: 3,000 mm. Side passage: 1,200 mm. Slide registration: 150 mm. Strokes per min: 20- c/min. Stroke : 500 mm. Mold clearance at PMI: 1,118 mm. Main motor power: 30 kw Hydraulic Safety: present Weight: 110 ton.

Condition: used, Thrust: 400 TON. Barbed points: no. 2 Model: AF 400 MB 30-60 Year of construction: 1992 Table size: 3,000 X 1,600 mm. Slide size: 3,000 X 1,600 mm. Gtodpfx Ajq N Er Dsbrou Front passage: 3,000 mm. Side passage: 1,200 mm. Slide registration: 150 mm. Strokes per min: 20- c/min. Stroke : 500 mm. Mold clearance at PMI: 1,118 mm. Main motor power: 30 kw Hydraulic Safety: present Weight: 82 ton.

Condition: excellent (used), Thrust: 300 TON. RATED CAPACIT Model: 2MR TYPE Year of construction: 2000 Gsdpfx Asq N Etzjbrotu YEAR OF CONSTRUCTION Table size: 1.750 x 1.250 mm TABLE DIMENSIONS Slide adjustment: 160 mm SLIDE ADJUSTMENT Strokes per min.: 10-30 c/min. CONTINUOUS SPEED (variable) Stroke: 250 mm SLIDE STROKE Mold clearance at BDC: 500 mm SHUT HEIGHT Main motor power: 32 kw MAIN MOTOR POWER Hydraulic Safety: present Hydraulic Safety

Condition: excellent (used), functionality: fully functional, die cushion stroke: 400 mm, table width: 1,900 mm, table length: 3,000 mm, installation height: 1,800 mm, distance between stands: 3,040 mm, pressing force: 1,000 t, die cushion force: 400 t, stroke length: 1,400 mm, ram plate width: 1,900 mm, ram plate length: 3,000 mm, Technical data: FORCES Ram force: 10,000 kN Ram return force: 1,000 kN Ram cushion force: 2,000 kN Drawing cushion force (blank holder): 4,000 kN STROKES Ram stroke: 1,400 mm Ram cushion stroke: 200 mm Drawing cushion stroke: 400 mm Die height (table to ram) Stroke upper position: 1,800 mm Stroke lower position: 400 mm Table size: 3,000 x 1,900 mm Ram size: 3,000 x 1,900 mm Clear space between uprights (left/right): approx. 3,040 mm Table height above floor: 450 mm Table plate as sliding plate Sliding direction: front Sliding travel: 3,000 mm Sliding speed: 0.5 - 6 m/min Load capacity: 20 t Table and ram deflection at F=max. 2/3 surface load: 0.125 mm/m Drawing cushion size: 2,450 x 1,550 mm Gtjdpfjxpctcjx Abrju Drawing cushion hole pattern From left to right: 17 rows = 16 spaces at 150 mm each From front to back: 11 rows = 10 spaces at 150 mm each Ram cushion size: 2,450 x 1,550 mm Ram cushion hole pattern From left to right: 17 rows = 16 spaces at 150 mm each From front to back: 11 rows = 10 spaces at 150 mm each Height above floor: approx. 7,700 mm Weight, static: approx. 160,000 kg Installed power, total: approx. 265 kW Drive power (main drives, 2 x 110 kW): 220 kW SPEEDS Ram Rapid down speed: approx. 600 mm/s Working speed max. up to 2,500 kN: approx. 37 mm/s Working speed F max.: approx. 16 mm/s Return speed: approx. 430 mm/s Die spotting speed: approx. ≤ 10 mm/s The above information is taken from the machine documentation. The seller accepts no liability for completeness or accuracy. The actual technical data and functions of the machine are decisive.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: H92-2348, table width: 1,150 mm, table length: 1,250 mm, pressing force: 250 t, stroke length: 400 mm, Control system retrofit to SIEMENS (2005) TECHNICAL DETAILS Press force at 260 bar: 250 t Table clamping area: 1,150 x 1,250 mm Ram clamping area: 1,150 x 1,250 mm Draw cushion area: 800 x 1,000 mm Draw cushion force at 200 bar: 100 t Draw cushion stroke: 150 mm Installation height: 700 mm Ram stroke: 400 mm Oil quantity: 2,300 l Return speed: 330 mm/s Rapid approach speed: 365 mm/s Working speed (partial load): 36 mm/s Working speed (full load): 15 mm/s MACHINE DETAILS Power requirement: 45 kW Weight without oil: 28 t Machine height: 5,400 mm EQUIPMENT - Programming language: Polish Gtedpfx Aewur R Rjbrou

Condition: good (used), Year of construction: 2023, functionality: fully functional, die cushion stroke: 200 mm, table width: 1,000 mm, table length: 1,200 mm, pressing force: 250 t, Ejector in ram - approx. 10 t Gsdevga H Espfx Abrotu Table drawing cushion approx. 800 x 850 mm Weight approx. 18 tons Stroke approx. 600 mm

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm Gtsdpfjvxwh Dsx Abrju stroke 1100 mm distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm control Siemens S5 distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t Gjdpfxjvxwmmj Abrotu stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement 200 kW weight of the machine ca. 150 t dimensions of the machine ca. 4,95 x 3,3 x 10,2 m

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled Gtedpfxovxwg Te Abrou die-cushion in pusher hydraulic, controlled overhauled in 2005