Used Bale Press for sale (12,661)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 70 t, Equipment: documentation/manual, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Bsdpfsx Sq Rdex Aglocu Pressing force: 700 kN Specific pressing force: 58 N/cm² Drive power: 10.5 kW Voltage / frequency: 400 V / 50 Hz Idle capacity (theor.): 42.97 m³/h Loading opening width x length: 890 x 1020 mm Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Bale weight: 600 kg

Condition: reconditioned (used), bale length: 1,200 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 380 kg, Press in perfect condition after overhaul, unused. Serviced exclusively by the manufacturer. Perfect condition. Fully automatic operation. Adjustable bale length: 600–1200 mm. Bale weight approx. 380 kg. Bsdpfxox S Sbdj Aglocu

Condition: used, Year of construction: 2016, Compressed air | Krone Comprima 150 CV XC Year of manufacture: 2016 Approx. 27,500 bales pressed All chains replaced in 2023 Bjdpfx Agjx R N R Holecu Wrapping table Control unit Complete knife set Roller hold-down Air brake | Internal No.: 11349362

Condition: used, Year of construction: 1994, operating hours: 62,058 h, functionality: limited functionality, machine/vehicle number: 099314, bale width: 770 mm, bale height: 520 mm, Manufacturer: COMDEC - PAAL Model: LV2020PFT Bjdpfet Ucqfox Aglecu Serial number: 099314 Year of production: 1994 Maximum capacity: 25,000 kg/h Bale outlet dimensions: 77 cm x 52 cm The baler is operational - it worked until the production line was extinguished. Recently there was a problem with automatic binding.

Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2012 Pressing force: 40 t Bjdjx H R U Sjpfx Aglscu

Condition: ready for operation (used), HSM V-Press 860 Baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressure: 63.46 N/cm² Drive motor power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Loading aperture (W x H): 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Binding material: wire Pressed materials: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene Bcodpfxsra Rbgs Aglju HSM V-Press 860 Plus, year 2013-2015, price: €7,500 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 Plus, year 2019, price: €9,000 HSM V-Press 860, brand new, ex-display, year 2020, price: €13,000 Bale binding: 4-fold wire tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (approx.): 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Filling aperture (mm): 1200 x 565 Cycle time (seconds): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 Plus B, year 2020, price: €14,000 Press force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Filling opening (W x H): 1500 x 651 mm Bale size (L x W x H): 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Binding material: wire Suitable materials: foil, cardboard Idle cycle time: 25 s

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 15 t, bale width: 700 mm, bale height: 700 mm, bale weight: 220 kg, input voltage: 400 V, power: 4 kW (5.44 HP), empty load weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Year of production: 2002 3x400V, 4kW, 14.5A Compression force: 15t Net weight: 2.7 t Bodpjh Dy Rfofx Aglecu Bale max. sizes 700x700x1000 mm weight of a bale: ca 120 – 220kg Wide Range of Used Machinery, Industrial Equipment

Year of construction: 1982, condition: good (used), machine/vehicle number: 14320, Vertical Baling Press Bodpfx Aoiuky Isglocu

Condition: ready for operation (used), Year of construction: 2003, Baling press HSM 500.2 VL Fourfold wire bale tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000–1200 Bale weight (kg): approx. 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Bjdpera Ak Eofx Aglecu Feed opening (mm): 1200 x 565 Cycle time (sec): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Year of manufacture: 2002–2005, price: 3,400 EUR Baler HSM V Press 500.2 VL Year: 2006–2008, price: 3,600 EUR Transport height: 2600 mm

Condition: ready for operation (used), Model: HSM V-Press 1160 Plus Baler Pressing force (kN): 532 Output (bales/h): 1–2 Max. bale size (mm): 1200x1100x1000–1200 Dimensions (L x W x H) (mm): 1780x1150x2985 Power (kW): 7.5 Year 2007–2008 price €5,500 year 2009–2010 price €5,800 year 2011–2013 price €6,300 We also offer HSM V-Press 1160 Max balers, year 2014–2015 Bsdera Nyuopfx Aglecu Weight (kg): 2,300 ALSO AVAILABLE: 2017–2018 models – €7,500

Year of construction: 2001, condition: good (used), HSM-500.1_VL PRESS PAPER PRESS FILM PRESS BALER ready to use good CONDITION used & good / see photos model: HSM 500.1 VL machine no. 6135.244.P Bcodslc Du Njpfx Aglju serial no. 220109689 pressing pressure 50 tons V 400; Hz 50 KW 7,5 Amp. 15,5 Pressing force 6 tons Year of manufacture 2001 more presses in our other offers article used and good / roughly cleaned (plug in and go ) dimensions: on request !!! Other photos are for further use possibility. All items seen in photos also available from us. Price quotation net per piece for pickup from stock 47441 Moers current stock 1 piece Viewing is expressly offered. more technology in stock see photos or ask by phone General: We offer here from various acquisitions articles, which we describe as well as possible, as well as set meaningful photos. Further details about the article can not be made. We offer the possibility of Tuesday and Thursday in the time between 9 and 16 o'clock after telephone appointment to visit. If necessary, the article can be taken away immediately. Answers to this article we can offer due to time constraints only if you provide us with a phone number when you request. This offer, unless specifically described, is USED GOODS. Any packaging may be damaged. Items have been visually inspected and are as far as technically ok. All offers ex stock 47441 Moers. If you want shipping, please contact us to discuss packaging and shipping costs. Call with interest gladly by. all dimensions are approximate Errors in the description expressly reserved.

Condition: ready for operation (used), Manufacturer: HSM Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Pressure: 16 t Filling opening: 1100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1100x700x950 mm Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5A Binding: 4-fold vertically Bedev Ai Tgspfx Aglecu Vertical capacity: 4 - 8 bales/hour Machine weight: 940 kg Year 2001-2005

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 26 t, filling opening width: 1,500 mm, filling opening length: 630 mm, bale length: 1,500 mm, bale width: 800 mm, bale height: 1,140 mm, bale weight: 500 kg, total width: 1,060 mm, total height: 2,576 mm, total length: 2,075 mm, overall weight: 1,220 kg, noise level: 65 dB, power: 4.6 kW (6.25 HP), Powerful bale press Orwak 3820 Power. Extra good machine for big dimensions cardboard or foil because of the extra large feed opening 1500 x 630 mm. Bjdexmvc Ejpfx Aglocu

Condition: used, Year of construction: 2012, operating hours: 31,000 h, functionality: fully functional, pressing force: 90 t, filling opening width: 940 mm, filling opening length: 1,600 mm, bale width: 1,000 mm, bale height: 800 mm, total width: 5,800 mm, total height: 5,680 mm, total length: 9,050 mm, overall weight: 16,500 kg, power: 53 kW (72.06 HP), volume flow: 190 m³/h, tank capacity: 1,500 l, Equipment: documentation/manual, The baler has been in operation since 2012 and has been primarily used for compressing paper materials, which make up approximately 85% of the total volume processed. The remaining materials include film/nylon and a small percentage of plastics. The machine has undergone regular maintenance and remains fully functional to this day. It continues to serve as our main baler in daily operations. Operating Schedule: 5 days per week, 8 hours per day Throughput: Approximately 50 tons per day In 2023, we replaced the carriage plate wheels and bearings. Bsdox H Rmbepfx Aglocu The pump for the pressing channel is new. The machine operates under excellent pressure conditions; we consistently achieve container loads of 25 tons of compacted cartons. The tying system is fully functional and performs reliably using a 4-wire configuration. The main cylinder piston was recently replaced with a new one, installed by local technicians. Minor modifications have been made to the tying system and the spring system that prevents material expansion back into the carriage plate area. These changes are The channel is in good operational condition. Recently, the old floor was removed due to wear, and we applied a filler compound (similar to concrete) to smooth out irregularities and prepare the base for a new floor installation. This work ensures proper alignment and durability moving forward. The conveyor is in working order, with visible signs of wear on the side panels. These are cosmetic and clearly visible in the photos included in this report

Condition: ready for operation (used), Baler Hsm 155 VL Bale dimensions L x W x H: 1100 x 700 x 700 - 950 mm Bale weight: 2000 - 250 kg (Cardboard) Technical data: L x W x H: 1470 x 940 x 2259 / 2439 mm Bedpera Nrmsfx Aglscu Weight: 950 kg Pressure force 16 tons Power supply: 400 V (three phases) Motor power: 4 kW Bale ejector Hsm 155.1 VL baler pressure force 18 tons Price of Hsm 155.1 VL baler - 2600eur Hsm 155.2 vl baler pressure force 16 tons Price of hsm 155.2 vl baler - 2800eur

Condition: used, Year of construction: 2019, Chamber Press - Baling Press - Raw Material Press Bramidan X30 AD, used 🧰 Product Features • Manufacturer: Bramidan • Model: X30 AD • Condition: Used, see photos • Color: Orange • Year of manufacture: 2019 • Dimensions: approx. 1760 x 1255 x 2295 mm • Net weight: 1650 kg • Press force: 300 kN • Cycle time: 25 seconds • Power: 4 kW • Voltage: 3 x 230 - 440 V / 50/60 Hz • Noise level: 59 - 60 dB • Bale weight: Plastic up to 425 kg, cardboard up to 350 kg 💰 Price € 8,900 net excl. VAT Bjdpfx Asxvyn Doglecu • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible at any time by prior arrangement Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock (Subject to changes and errors in technical data, information and prices as well as prior sale! See our terms and conditions; all prices excl. VAT ex stock.)

Condition: used, Year of construction: 2025, operating hours: 86 h, Compressed air | Knives: 25 | Pickup-hydraulic | Pickup support wheel | Roller hold-down | Claas Rollant 630 Uniwrap Year of manufacture: 2025, currently 422 bales pressed (as of 26.06.2025) Technical specifications: - Baler-wrapper combination with 1.25 m chamber diameter - Chamber width 1.20 m MULTIFLOW pickup: - Pickup width 2.10 m - Gauge wheels, pendulum mounted, with 16x6.5-8 tyres - Dual feed augers PRO cutting floor: - Hydraulic suspension and lowering cutting floor to prevent blockages - Operation via terminal including optical and acoustic signals ROTO CUT cutting rotor: - Cutting rotor with four spirally arranged tine rows - Individually protected knives against foreign objects - Hydraulic knife group selection Chamber: Bodpfx Agswvwtajlscu - 16 profiled steel rollers - Rear door with hydraulic locking - Greasable baler roller bearings Wrapping unit: - Fully automatic control - Twin wrapping arms with 750 mm film pre-stretchers - Wrapping speed max. 36 rpm for 6 layers of film in 23 seconds - Terminal for direct access at the wrapping table - Hydraulically lowerable film magazines for 12 spare rolls - PROFI CAM camera and work light for wrapper illumination - Continuous chain lubrication - Hand wash tank incl. soap dispenser - Hydraulic requirements: load-sensing and 1 x single-acting Equipment: MULTIFLOW Pickup HD with twin roller hold-down Dummy knives, set of 25 ROTO CUT cutting rotor with hydraulic swinging PRO cutting floor, 25 knives PREMIUM LINE knife set, 25 pieces Film pre-stretch 82% Bale transfer guide ROLLATEX net tying Single wide-angle PTO shaft with cam-type clutch, 6-piece Tractor hydraulic connection, comfort Adjustable support stand Hydraulic/electronic ROTO CUT swinging floor K80 ball head hitch, MR Tyres: 600/55 R26.5 Dual-line compressed-air brake system, up to 40/50 km/h LED high-end work lights including service lighting Screen for PROFI CAM CEMIS 700 Automatic central lubrication system, electrically actuated Extended tool set | Internal no.: 11264178

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, pressing force: 50 t, overall weight: 17,000 kg, empty load weight: 17,000 kg, Technical data: Avermann Maschinenfabrik GmbH & Co. KG Type: AVOS 1410 BS-22/50 Year of manufacture: 2000 Pump operating hours: 25,000 hours Feeding channel dimensions: 1,400 x 1,000 mm Bale size: 1100 x 750 mm (width x height), length adjustable Drive power: 22 kW Net weight: 17 t Capacity: 5.5 tons/hour Bale weight: depending on the material, up to 500 kg Vertical, 4-fold tying, fully automatic PLC control: Siemens S7-1500 Bedpew N Hlqofx Aglecu Assembled baler dimensions: 8,610 x 2,400 x 3,835 mm (length x width x height) Special equipment: Wear-resistant floor made of HARDOX steel The conveyor belt is not included with the machine. Documentation: the complete operating manual is available. Viewing is possible by prior appointment. We do not assume responsibility for the technical data or possible errors. Condition of the press: It is in working condition thanks to continuous servicing. It has been used exclusively for baling paper. Avermann baler type AVOS 1410 BS-22/50, including wire-drawing stations and bale chute.

Condition: ready for operation (used), Pressing force 60s tons Dixi 60s baler, year 2006-2012 costs 4,000 EUR YEAR 2018-2020 costs 5,500 EUR Bale dimensions: 120 x 80 x 110 cm Press dimensions: 1900 x 1400 x 2200 mm (height) Press weight approx. 2,430 kg Bedpfxsra Nqhs Aglocu Bale weight up to 500 kg Oil heating Motor 7.5 kW Brand new exhibition unit costs 11,000 EUR

Condition: ready for operation (used), Year of construction: 2003, Technical data of baler 18S: Motor: 4kW Connection voltage: 400/50 V/Hz Press force: max. 180 kN Cycle time: 22 s Pressing time: 12 s Filling opening W x H: 107 x 62 cm Height w. Floor: 98 cm Ejected bale* W x H x D: approx. 110 x 70 x 70-80 cm Bale weight: 120 - 180 kg max. Bjdpfxora Aghe Agljcu Dimensions W x D x H: 152 x 95 x 197 cm Weight 850kg The 2003-2007 vintage costs 3500 eur Yearbook 2008-2009 costs 3800 eur The 2010-2013 vintage costs 4500 eur Yearbook 2016-2018 costs 5000 eur

Condition: not inspected (used), functionality: unexamined, Harris TGS 215 3-RAM metal baler, 16” square with 600kw hydraulic power pack and hopper Video of baler in operation available on request, further details and photos to follow Bcedpfx Agsw E Htuelou Machine decommissioned

Condition: good (used), Year of construction: 1981, functionality: fully functional, Equipment: documentation/manual, Automatic channel baler BOA Continu 25 LB + conveyor belt. The baler is in good condition and has been regularly serviced. Recently, the Denison pump underwent a complete overhaul. Fully functional and in continuous operation. Please contact us for further information. Bcjdjw S Tv Ujpfx Agleu

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, pressing force: 25 t, filling opening width: 1,090 mm, filling opening length: 530 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 800 mm, bale weight: 250 kg, total width: 1,760 mm, total height: 1,995 mm, overall weight: 1,410 kg, noise level: 59 dB, transport height: 1,995 mm, year of last overhaul: 2025, Vertical baler Bramidan 4- x 25 for 25 t pressforce. In good condition, ready to work. Bale weight 200-300 kg. Bjdpfowpmbajx Aglocu

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, pressing force: 58 t, filling opening width: 600 mm, filling opening length: 1,190 mm, bale length: 1,100 mm, bale weight: 450 kg, total width: 700 mm, total height: 1,000 mm, overall weight: 2,300 kg, STRAUTMANN PP1207 Single chamber baler - Very good condition. Low running. Bedpfewqfnzox Aglecu 70*110*80-100 cm 58 tons of pressing force 70 cm deep chamber 60cm high door opening Quick Door auto door hydraulic bale dropping Possible recyclable materials: Cardboard, film, PET bottles, foam, cans, electronic scrap Bale size (LxWxH): 1200 x 700 x 800 mm Bale weight: approx. 400 - 500 kg External dimensions (LxWxH): 1844 x 1067 x 2868 mm Transport height: 1970 mm Filling opening: 1145 x 430 mm Throughput: 1 - 2 bales / hour Number of band channels: 4 Weight of press: 2,200 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / covered outdoors Noise level: under 80 dB(A) Year of manufacture: 2004 Baler rental possible.

Year of construction: 2008, condition: good (used), Horizontal baling press Bedog Ibt Nspfx Aglscu Build in 2008 Bale size 800x1000x1400 Loading height 1250mm