Radial drilling machines over 2000 mm arm length for sale
Identified location: Ashburn (US) (Edit)
|
4
Leicestershire, United Kingdom
dealership location
5824 km
ready for operation (used)
Arm length 6' / 1828mm
Base area 41" x 63" / 1041mm x 1600mm with 4 tee slots
Arm rise & fall 26" / 660mm
Head traverse 54" / 1371mm
Bflchega2t
Input 400/3/50hz
Spindle speeds 58 - 1550 rpm
Spindle bored 5 Morse Taper
Spindle rise & fall 14" / 355mm
Feed rate 0.0083" - 0.012" / 0.21mm - 0.30mm
Throat 63" / 1600mm
Fitted with Spindle Brake, Box Table, Coolant
Length 9' 8" / 2.94m
Width 4' 2" / 1,27m
Height 10' 3" / 3.12m
Nett weight Actual 5,690 Kgs more
|
|
0
bore capacity in steel (diameter):80 mm
arm length:2550 mm
workpiece height max.:1580 -
W9un0
tool adaptor:MK6
power capacity:7,5 kW more
|
|
5
bore capacity in steel (diameter):40 / 50 mm
arm length:635 - 1230 mm
workpiece height max.:707 mm
thread capacity:M28 / M32
spindle taper MT:4
Bfqbs38qsl
spindle stroke - max.:200 mm
turning speed range - drilling:56 - 1120 U/min
spindle feeds::9
feed range - boring:0,08 - 1,25 mm/U
base plate surface area:1300 x 710 mm
total power requirement:4 / 3,4 kW
weight of the machine ca.:2,5 t
dimensions of the machine ca.:2,1 x 1,5 x 2,76 m more
|
|
1
:RB 100 | RB 120
bore capacity in steel (diameter):100 | 125 mm
arm length:3150 | 4000 mm
distance spindle center to floor plate:2500 | 2500 mm
distance spindle center to table:min. 750 mm
Nk7rn
spindle stroke:500 | 560 mm
Distance between spindle and column, max.:3150 | 4000 mm
Distance between spindle and column, min.:570 | 600 mm
spindle taper MT:6 MK | Metrisch 80
spindle turning speed range:8-1000 | 6-800 U/min
transmission ratio:22
feed range:0.06-3.2 mm/min
dice table:800x1250 mm
powe... more
|
|
1
• scissors lift
• column raising 600 mm
Wwr38
max. drilling capacity in steel/cast iron 80/120 mm
min./max. throat 550/2.565 mm
min./max. distance between spindle and clamping plate 570/2.200 mm
boring spindle stroke 475 mm
spindle fixture MK 6
spindle speeds 19 – 1,800 rpm.
feeds 0.035 – 2.8 mm/r.
spindle power 7,5/11 kW
approx. weight 13 tons
approx. required space (L x W x H) 4,327 x 1,456 x 4,600 mm more
|
|
3
bore capacity in steel (diameter): 100 mm
arm length: 400 - 2100 mm
cantilever adjustment vertical: 100 mm
spindle taper MT: 50
drill depth: 415 mm
spindle stroke: 400 (Skala) mm
column turnable: 360 °
column diameter: Ø 500 mm
distance drilling head - clamping area: min./max.: 400 / 1.800 mm
number of spindle speeds: 12,5 ... 1.600 / 15 step U/min
feed: 0,063 ... 2,5 / 15 step mm/U
table clamping surface:: L x B: 2.000 x B: 950 mm
Betavpawnn
total power requirement: ca. 35 kW
weight of the mac... more
|
|
13
Leicestershire, United Kingdom
dealership location
5824 km
1971
ready for operation (used)
Serial No. P32742
Arm length 10' / 3048mm
Base area 113.1/2" x 60" / 2883mm x 1524mm
Arm rise & fall 65" / 1651mm
Head traverse 90" / 2286mm
Input 400/440/3/50 AC 12.5 HP
Spindle speeds 9.1/2-1560 rpm
Spindle bored No. 6 Morse Taper
Spindle rise & fall 16" / 406mm
Feed rate 0.002"-0.040" / 0.05mm-1mm
Bflcee0itj
Throat 102" x 95" / 2591mm x 2413mm
Fitted with Coolant & Spindle Brake
Length 14' / 4.27m
Width 5'2" / 1.57m
Height 15'6" / 4.72m 14'-10" without Top Motor
Nett weight approx. 16.5 ton... more
|
|
6
Bünde, Germany
dealership location
6452 km
1981
used
bore capacity in steel (diameter) 80/110 mm
arm length 2515 mm
workpiece height max. 1800 mm
Nlomf
spindle taper MK 6
spindle turning speed range 30, von 9 -1400 U/min
feeds 16, von 0,035 -2,8 mm/U
max. distance bore spindle - base plate 2200 mm
stroke of the bore spindle 475 mm
drive drilling motor 7,5 kW
weight of the machine ca. 10,8 t
dimensions of the machine ca. 4 x 1,4 x 3,63 m (LxBxH)
Electric 380 Volt
Cooling equipment
With turning speed and feed value - preselection as well as... more
|
|
3
Base, column, boom and gear head are made of premium high-quality cast
major design features include a large column and a highly torsion-resistant boom
boom height adjustment via a powerful motorized drive and vertical spindle
the boom lifting gears run in an oil-bath for maximum reliability and minimum wear
advanced column swivel design with optimized clamping features maximum rigidity and minimum clamping offset
swivel axis and travel axis feature extremely smooth operation to make the operato... more
|
|
8
Projection of 435-2000 mmMk5 clamping surface 1120 x 2120 mmm with 2 cube tables 750 x 750 x 500 mm with 2-sided clamping flutesmachine dismantled into 3 partscargo dimensions approx. L 3000 x W 2000 x H 1500 mmWeight approx. 6 tons
Bflvbn8k8y more
|
|
|
|
3
bore capacity in steel diameter 75 mm
arm length 2000 mm
workpiece height max mm
-----
WORKING RANGE -BORING-
- drilling capacity full bore (steel) 75 mm
- throat (max) 2000 mm
MILLING SPINDLE / HEAD
- spindle type: vertical
- spindle revolutions (min) 5 /min
- spindle revolutions (max) 2000 /min
- number of gears 24
- spindle diameter 95 mm
- tool fixture: MK 5
- distance of axis of horizontal spindle - clampin 1730 mm
- sleeve stroke 450 mm... more
|
|
5
Hemer, Germany
dealership location
6438 km
1970
used
bore capacity in steel (diameter):90 mm
Ucizumody
arm length:2500 mm
workpiece height max.:1600 mm
tool taper:6 MK
weight of the machine ca.:9,5 t
dimensions of the machine ca.:3,6 x 1,55 x 3,6 m more
|
|
2
Leicestershire, United Kingdom
dealership location
5824 km
ready for operation (used)
|
|
8
bore capacity in steel (diameter) 70 mm
Beny8822ow
arm length 2200 mm
workpiece height max. 1500 mm
table surface area 1900 x1000 mm
bore spindle diameter /taper MK 6 mm
bore spindle turning speed range 11,2 - 2000 U/min
bore feed range 0,035 - 2,8 mm/U
bore spindle stroke 400 mm
distance spindle/base plate 870 / 1870 mm
spindle movement - horizontal 1600 mm
voltage 380 V / 50 V
spindle drive 5,5 kW
total power requirement 10 kVA
weight of the machine ca. 5,5 t
dimensions of the machine ca. 3,3... more
|
|
4
bore capacity in steel (diameter): 63 mm
arm length:: 2000
workpiece height max.: 1270 mm
spindle taper MT: MK 5
Vqujai
drill depth: 400 (Hub) mm
quill stroke: 400 mm
feed: 0,05 - 0,32 m/min
revolutions per minute spindle:: 14 - 1000 U/min
column turnable: 360 °
electrics - voltage/frequency: 380/50 V/Hz
base plate: 1900 x 950 mm
total power requirement: 13 kW
weight of the machine ca.: 7,9 t
space requirements approx. LxWxH: 3,9 x 1,5 x 3,4 m
This radial drilling machine has an electric slid... more
|
|
4
arm length 2.000 mm
boring spindle 75 mm
tool taper MK 6
weight of the machine ca. 7 t
Bfoty7wwmu more
|
|
6
bore capacity in steel (diameter) 75 mm
arm length 440 - 2000 mm
crossrail adjustment vertical 950 mm
spindle taper MT 6
spindle turning speed range 19 - 1900 U/min
feeds 0,047 - 2 mm/U
Cdade2q0
threading metric 60 mm
threading WHITWORTH 2 1/4 "
column diameter 450 mm
base plate surface area 2300 x 1100 mm
weight of the machine ca. 7 t
dimensions 3,22 x 1,14 x 3,44 m
Accessories: clamping table, clamping surface 750 x 740 mm, height 500 mm;
coolant more
|
|
9
Goldenstedt, Germany
dealership location
6416 km
2004
used
bore capacity in steel (diameter) 63 mm
boring head horiz. adjustable 1600 mm
throat 2000 mm
tool taper MK 5
feed range 0,04 - 3,2 mm/min
distance spindle center to column 450 - 2050 mm
distance spindle /table 400 - 1600 mm
stroke speed 1 m/min
pivoting angle 260 Grad
spindle turning speed range 20 - 1600 U/min
number of spindle speeds 16
feed range 0,04 - 3,2 mm/U
quill stroke 400 mm
horiz. adjustment of drilling head 1600 mm
total power requirement 5,5 kW
weight of the machine ca. 6 t
dimens... more
|
|
2
Leicestershire, United Kingdom
dealership location
5824 km
ready for operation (used)
|
|
6
Radial drilling machine in technically good condition, constantly maintained without maintenance jam, recently still new trapezoidal thread spindle with nut.drilling capacity 80mm, projection 2.000mm!machine is sold free truck.weight approx. 11.000kg!manufacturer StankoimportDrilling capacity: 80 mmTool holder: MK 6Spindle stroke: 475 mmspeeds: 12,5 - 1.600 rpm projection min.500 mm projection max.: 2.100 mm clamping plate: 1.250x1.900 mm machine foot length 3.500mm width 1.630mm weight approx. ... more
|
|
11
- Machine is ready for operation - Machine is under power - Inspection by arrangement is possible at any timeType: BR 100 VO 104Manufacturer: KovosvitCondition: used, fully functionalManufactured: 1994Spindle-Ø: 100 mmWorking radius: 4000 mmWorking range: 160°
Novnl more
|
|
6
H- Veszkény, Hungary
7228 km
unexamined (used)
The machine is not under power, you can not look at the operation already.
Bfq8cr2kn8 more
|
|
7
bore capacity in steel (diameter) 80 mm
arm length 2000 mm
bore capacity in cast iron 100 mm
spindle turning speed range 25 * 1670 U/min
column diameter 500 mm
feed range 0,08 - 0,7 mm/U
number of feeds 8
bore spindles - Morse Taper 5
distance spindle /table 1740 mm
Benrvttgkh
total power requirement 5 kW
weight of the machine ca. 9 t
dimensions of the machine ca. m more
|
|
4
Leicestershire, United Kingdom
dealership location
5824 km
ready for operation (used)
|
|
6
Drilling capacity: Ø 80 mm
Spindle taper: MK 6
Spindlestroke: 475 mm
Speeds: 12,5 - 1.600 Rpm
Lx20b
Throat min.: 500 mm
Throat max.: 2.300 mm
Floorplate: 1.250 x 1.900 mm
Machine weight: 10.000 kg more
|
|
3
MAS VR6A radial drilling machine
Brand: MAS
Model: VR6A
Year: 1963
Capacity (kW): 11
Voltage: 380
Frequency (Hz): 50
Dimensions Lxwxh (mm): 3200 x 1100 x 3000
Ca weight (kg): 6500
Boom: 2000 mm cube table dimensions (mm): 1250 x 800 x 500 spindle: MK5 included machine vise and cooling plant
Qtkqgfhs8
The machine is in used but good condition
Original documents are available. more
|
|
6
Radial drilling machine / WEBO - Roeperwerk / Type: BR 55/70H / YOM: 1979
The machine can be inspected by appointment at the factory under power.
TECHNICAL DETAILS:
- Drilling capacity in steel(diameter): 100 mm
- Outreach/extension: 3.100 mm
- Travel of the boom in height: 1.365 mm
- Workpiece height max.: 2.300 mm
- Internal taper/cone: MK6
- Drilling radius min./max.: 1.300/3.600 mm
Mwuir
- Distance spindle/base plate: 970 x 2.335 mm
- On movable bed, bed length: 7.500 mm
- Stroke of the d... more
|
|
3
Radial drilling machine Fabr. MAS type VR 6 A
Masch.# 219 1963 model
Technical data:
Gr. Drilling capacity at 60 / 25 kg resistance 63 / 80 mm
Gr. Boring capacity 300 mm
Gr. Thread cutting performance M 64 x 4 / M 85 x 4
RADIUS 2000 mm
KL. / gr. Distance spindle and base plate 540 / 1865 mm
vertical adjustment of the jib 950 mm
horizontal adjustment of the jib 1613 mm
Boom 0-360 ° swivel option
Spindle mount Mt 5
Spindle stroke 380 mm
16 spindle speeds 11.2-2000 RPM.
16 feed 0.035 2.8 mm / Rev.... more
|
|
10
Leicestershire, United Kingdom
dealership location
5824 km
1995
ready for operation (used)
Serial No. 2240
Arm length 1000 mm
Base area 1150 mm x 790 mm
Nnjhj
Arm rise & fall 500 mm
Head traverse 750 mm
Input 415/3/50 3.2 kW
Spindle speeds 90 - 4500 rpm
Spindle bored no 4 morse taper
Spindle rise & fall 250 mm
Feed rate 0.03 - 0.31 mm
Throat 850 mm x 1000 mm high
Fitted with spindle brake , coolant and box table
Length 6'
Width 3' 6"
Height 7'
Nett weight actual. 1,990 Kgs / 1.96 Tons more
|
|
6
Nr. 3321:
1 gebr. Radialbohrmaschine MK 5
Fabr. HETTNER
Typ HF 50 E / 2500
Bauj. unbekannt
Arb.-Ber.: MK 5 x 2500 mm
Antriebsleistung: 3,7 / 6 kW
Sonstiges:
Spindelaufnahme MK 5
0to0ilyb
Drehzahlbereich 30 - 1500 min-1
Vorschuebe 0,05 - 0,6 mm / U
Platzbedarf ca. 3,7 x 1 x 3 m
Gewicht ca. 5 to (geschaetzt)
Price EXW D-68642 Bürstadt more
|
|
5
Code 81192
Description Radial drilling machine
Make CSEPEL
Model HFR 75 / 2000
Serial No. 17039
Year of make 1982
Drilling Cap. in St. 60 75 mm
Spindle taper 5 MK
Spindle radius 2225 mm
Min/max height spindle / top of base plate 330 / 1730 mm
Arm traverse 950 mm
Spindle 450 mm
Number of speeds 24 steps
Speed range 10 – 2000 rpm
Feed range 18 0,037 – 2,0 mm/rev.
Working surface bed plate 1100 x 2300 mm
Motor 11 kW – 380 Volts
Dimension 3275 x 1130 x 3400 mm ( max. 3885 mm ) (L x W x... more
|
|
6
Articlenumber : KB-1845
Make : MAS Kosovit
H7kdjqtzs
Model : VR6A
Serial no : 257
Capacity (Kw) : 11
Voltage : 380
Frequency (Hz) : 50
Dimensions LxWxH (mm) : 3200 x 1100 x 3000
Total quantity in stock : 1
Weight (Kg) ca : 6500
Country of origin : Czech republic
Capacity Length (mm) : 2000 ( Ausladung / uitlading)
Table dimensions (mm) : 1250 x 800 x 500 ( tendre Block)
Ø Diameter (mm) : MK5 spindle
Comments : In very good condition, coming directly from 1st owner more
|
|
12
Raboma 12 UH2000 radial drilling machine drilling machine MK 5 throat 2000 mm;
Raboma 12 UH 2000 columns - radial drilling machine
Type 12 UH 2000
Drilling capacity 65 mm
Recording MK 5
Drilling outreach
Smallest 435mm / largest 2000mm
Quill stroke 315 mm
Speeds 16 - 1600 rpm
Weight estimated 11 to.
space requirements
Foot L: 3040mm W: 1150mm
Height 3700 mm
Bepdbxnlh7
with documentation. more
|
|
2
Wall radial drilling machine Fabr. WEBO type BR 50 WH/3200
Masch. # E 857/11 built in 1975
Technical data:
Drilling capacity 50 / 60 mm
Spindle mount Mt 5
Quill stroke 350 mm
KL. / gr. Removing tailstock - Center stand/projection 1150/3300 mm
vertical adjustability 1700 mm
Swivel boom 260°
12 spindle speeds 24-1050 RPM.
9 automatic feeds 0.06 1 mm / Rev
4.8 5.7 kW
Size 4000 x 3800 x 3200 mm
with
-hand-operated multi-plate clutch to thread cutting
L3g0xelz
-electrical clamp for column, cantilev... more
|
|
5
Leicestershire, United Kingdom
dealership location
5824 km
ready for operation (used)
Serial No. 21555
Arm length 46" / 1168mm
Base area 33" x 33" / 838mm x 838mm
Be9uen2g9h
Table area 24" x32" / 609mm x 812mm
Table rise & fall 12" / 304mm
Table tilts 0-90 degrees
Table swivels 360 degrees
Head traverse 24" / 609mm
Input 415/3/50hz
Spindle speeds 25--1600 rpm
Spindle bored 4 morse taper
Spindle rise & fall 5" / 127mm
Feed rate .0036 / .0416
Throat 36"x42" / 914mm x 1066mm
Fitted with spindle brake, coolant
Length 6` / 1828mm
Width 2`9" / 838mm
Height 8`8" / 2641mm
Nett weigh... more
|
|
5
Dortmund-Wambel, Germany
dealership location
6415 km
1960
used
1 used well-preserved high radial drilling machine
Make: WEBO
Model: BR 63 x 2500
Year of construction: 1960
Machine number: 19
Serial No.: E368
Technical data:
Drilling capacity in steel 63 mm
Drilling capacity in cast 80 mm
Spindle mount Mt 5
Throat depth 2500 mm
KL. Distance from the outer pillar of 350 mm of vertical movement of the boom 900 mm
maximum distance spindle / tabletop 1700 mm
Spindle stroke 400 mm
Spindle 115 mm
Spindle speeds 14-710 RPM
Feed range 0.07-2 mm / Rev
Column diam... more
|
|
6
Code 111263
Description Radial drilling machine
Make CSEPEL
Kpzdp
Model RFH 100 / 3000
Serial No. 73089
Year of make 1975
Drilling Cap. in St. 60 / cast iron 100 / 120 mm
Spindle taper 6 MK
Spindle radius 3500 mm
Min/max height spindle / top of base plate 440 – 2100 mm
Arm traverse 1260 mm
Spindle traverse 400 mm
Number of speeds 21 steps
Speed range 18 – 1800 rpm
Feed range 18 0,0375 – 2,0 mm/rev.
Working surface bed plate 3160 x 1550 mm
Motor 15 kW – 380 Volts
Total power 20 kVA
... more
|
|
4
Wir koennen diese Baureihe in verschiedenen Varianten liefern!!!
Radialbohrmaschine VO75 von WEILER: einfach, robust, leistungsstark
Ihre Einsatzfelder: Bohren, Ausbohren, Ausreiben und Gewindeschneiden in der Einzelteil- und Serienfertigung.
Vorteile der Radialbohrmaschine VO75 von WEILER:
•Einfach bedienbar, robust und zuverlaessig
•Leistungsstark: fuer Bohrungen bis 75 mm Durchmesser in Stahl
•Laenge der Bohrschlittenbewegung bis 1.640 mm
•Ideal fuer Bohrarbeiten aller Art
•Uebersichtliche... more
|
|
4
Altenstadt, Germany
dealership location
6745 km
1987
good (used)
SN 2258
weight of the machine 4.200 kg
Ftwo0df9 more
|
|
6
1 used Radial Drilling Machine
Manufacturer TOS
Model VO 63
YOM 1987
with square table
Travel of spindle head along arm 2000 mm
Max. drilling dia. 63 mm
Spindle stroke 380 mm
Nay8h
Taper in spindle 6 MK
Spindle power 5,5 kW
Spindle speeds 11,2 - 2000 rpm
Weight of the Machine approx. 7 ton more
|
|
9
Leicestershire, United Kingdom
dealership location
5824 km
1979
ready for operation (used)
Serial No. P33785
Arm length 4' 6" / 1371mm
Base area 52" x 36" / 1320mm x 914mm
Arm rise & fall 24" / 609mm
Head traverse 32" / 812mm
Input 415/3/50 7.5 kW
Spindle speeds 22 - 1000 rpm
Spindle bored No 5 morse taper
Spindle rise & fall 14" / 355mm
Feed rate 0.002" - 0.040"
Be9ubyauk8
Throat 42" x 54" / 1066mm x 1371mm
Equipment Box table, coolant and spindle brake
Length 8' / 2.44m
Width 3' 4" / 1.01m
Height 10' / 3.04m more
|
|
4
drilling capacity in steel (diameter): 60 mm
arm length: 2000 mm
min./max. distance between supporting surface and boring spindle sleeve: 525/1690 mm
spindle sleeve stroke: 310 mm
spindle taper MK: 5
Pr07j3
mounting table: 1900 x 1100 mm
rotations: 30 - 1250 rpm
carriages: 0,08 - 1,35 mm
spindle drive: 5,5 kW
weight: 5700 kg
space needed: 2975 x 1100 x 2950 mm more
|
|
6
Technical data:
-Drilling capacity in steel ST 60 65 mm
-Drilling drilling in steel 90 mm
Gsz0drdl
-Thread cutting device in steel up to M 60 mm
-Spindle mount Mt 5
-Drilling spindle stroke 400 mm
-Unloading min / max approx. 570 / 2400 mm
-Lift the boom 850 mm
-min / max - distance: - spindle - base plate approx. 890-1740 mm
-the processed baseplate mounting area B T 1400 - 2300 mm
-Spindle speed 30-1400 RPM
-Right - left rotation
-12 feeds 0.075 1.00 mm / Rev
-E. Central clamp sp... more
|
|
10
Stock No
Machinetype Radial Drilling Machine
Make CSEPEL
Type RF 100 / 2250
Newin
Control conventional
Location
Country of origin Hungary
Term of delivery immediately
Quotation Freeloaded on Truck
Price
Technical details
bore capacity in steel (diameter) 100 mm
throat max. 2250 mm
workpiece height max. 440 - 2100 mm
spindle taper MT 6
spindle turning speed range 18 - 1800 U/min
quill stroke 400 mm
Bccnmhiz0y
surface area 3160 x 1550 mm
feed range - boring 0,0375 - 2 mm/min
voltage 380 V
di... more
|
|
6
used Radial Drilling Machine
Manufacturer TOS - MAS
Model VR 8 A
YOM 1975
with square table
bore capacity in steel (diameter) 80 mm
arm length 2500 mm
workpiece height max. 2200 mm
thread capacity M 76
throat max. 2515 mm
throat min. 500 mm
Y2hiy3r03
max. pitch circle 5812 mm
vertical adjustment of arm 1100 mm
swivelling range 360 Grad
spindel power 7,5 kW
spindle taper MT 6
spindle diameter 65 mm
spindle stroke - max. 475 mm
turning speed range - drilling 9 - 1400 U/min
turning speeds: 30
sp... more
|
|
5
Praha 2, Czech Republic
dealership location
6923 km
1998
good (used)
Radial drilling machine Weyrauch prod. 1998 with added floor field , floor plates up to 3 m from basic machine plate.
All machine technical date - see photo in enclosure.
We ensure machine montage worldwide.
8jxfv8pxl
More details on the request. more
|
|
|
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Drilling
Dealer for Drilling
