Used Doosan Dl 300 for sale (306)

Condition: used, Year of construction: 2017, operating hours: 7,870 h, Year of manufacture: 2017 Ffjdpfx Afox Hgtwoneu

Condition: used, Year of construction: 2011, operating hours: 10,680 h, Year of manufacture: 2011 Fsdpfxox Hgr Hj Afnefu Empty weight: 18.890 kg Dimensions (LxBxH): 810 x 292 x 347 cm Digging depth: 7.533 m

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Ffedpfxox Sw E Ij Afnju Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: used, Year of construction: 2001, Daewoo Puma V300 CNC Lathe Fanuc 18 – T Vertical lathe Daewoo PUMA V300 Year of installation: 2001 Kitagawa chuck, diameter 305 mm Max. swing diameter over bed: 550 mm Max. turning diameter: 410 mm Max. turning height: 420 mm Spindle speed: 2,500 rpm AC motor power (cont./30 min.): 18.5 kW Turret with 8 tools Drilling diameter: 50 mm Tool section: 25 mm Control: Fanuc Series 18-T Ffodjyahy Dspfx Afnju Equipped with chip conveyor Complete with documentation

Condition: used, DAEWOO PUMA 300 LB (Doosan) 2-axis CNC lathe Fodpfxeqfm A As Afnsfu CNC Fanuc 18T Hydraulic tailstock Condition: very good. This machine can be inspected in our warehouse, under power. Mimu machine tools Italy

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 6,730 h, Year of manufacture: 2015 Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Ffedpex Hgqiefx Afneu Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: used, Year of construction: 2013, 370mm max. machining diameter, Fjdpfoyffz Nex Afnefu 651mm swing over bed, 461mm swing over cross-slide, 712mm max turned length, 3500rpm spindle, 76mm bar capacity, 12 station turret, 15kW spindle motor, FANUC Oi control, collet chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor, parts catcher.

Condition: used, Year of construction: 2020, CNC lathe 3-axis Doosan LYNX 300M C-axis with driven tools Fodsygwvnjpfx Afnofu Year of manufacture: 2020, Korea New Fanuc control (touch screen) Maximum turning diameter: 370 mm Maximum turning length: 712 mm Travel distances: Z – 790 mm X – 255 mm Chuck – 250 mm Spindle bore – 76 mm Max spindle speed – 3,500 rpm Turret for 12 tools BMT 55 Tailstock Renishaw probe Parts catcher -LNS chip conveyor -Tool holders in total: 10 pcs -4 pcs -4 pcs -2 pcs 1/1 driven -Machine documentation Operating hours: 1,441

Condition: used, power: 127 kW (172.67 HP), color: orange, lifting height: 2,800 mm, Year of construction: 2017, operating hours: 6,560 h, Year of manufacture: 2017 Fjdpfx Afexxkf Ssnofu Number of cylinders: 6 Empty weight: 15.000 kg Carrying capacity: 10.885 kg GVW: 25.885 kg Dimensions (LxBxH): 758 x 274 x 328 cm Engine type: Doosan DOOSN DL06 STAGE IV 6 CILINDROS

Condition: ready for operation (used), Year of construction: 2020, operating hours: 3,300 h, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1050 mm Y-AXIS TRAVEL: 900 mm Z-AXIS TRAVEL: 1000 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 1100 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 10000 rpm; 25-45 kW; 600 Nm; ISO 50 - BT PALLET: N.2 ; CONTINUOUS ; 630x630 mm MAX ADMITTED LOAD: 1500 Kg MAX MACHINABLE PIECE DIMENSIONS: ø1050 x 1350 mm TOOL MAGAZINE: CHAIN-TYPE ; 90 POS CONTROL UNIT: FANUC 31i Fsdpfxjxvfuvo Afnefu WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6520 x 3930 x 3495 mm ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014, operating hours: 5,580 h, Year of manufacture: 2014 Empty weight: 14.400 kg Fedpoxqfciofx Afnofu Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: good (used), Year of construction: 2014, spindle speed (min.): 2,500 rpm, Year of manufacture: 2014 Chuck diameter: 10" Number of axes: 3 Swing over bed: 250 mm Ffedpfx Aox N A Ebofnou Spindle speed (rpm): 2500 Machinable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Derlin, Peek

Condition: used, color: other, Year of construction: 2019, operating hours: 3,256 h, Power internal combustion engine: 270 HP (199 kW) GVW: 31.860 kg Make of engine: Doosan Ffodpswakc Asfx Afnsu CE mark: yes Serial number: 0020852 Machines for Sale Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly. We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines.

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM Fedpfx Aew Dvnxsfnefu SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Ffjdpfx Asvzln Refneu Special chuck is available

Condition: like new (used), Year of construction: 2024, Table size 1630 x 760 mm, table load 1500 kgs, Traverses XYZ 1630 x 762 x 650 mm, rapid feedrates 30m/min, Spindle power 18.5 Kw, spindle speed 12,000rpm, 30 station ATC, Ffsdpfxeyia Upo Afneu spindle taper BT40, through spindle coolant, swarf conveyor, Fanuc i series control.

Condition: like new (used), Year of construction: 2024, Traverses XYZ: 625 x 450 x 400mm, 500 x 450mm diameter table, max table weight 400kg, maximum workpiece size 550mm dimeter x 450mm high, B axis table tilt +30°, -110°, C axis 360degrees, 18.5kW, 12000rpm, BT40, Fsdpfx Aoyia T Sofnefu 24 pallets 120 station tool changer, Fanuc I series control, swarf conveyor,

Condition: excellent (used), power: 103 kW (140.04 HP), fuel type: diesel, color: orange, Year of construction: 2023, operating hours: 244 h, Equipment: air conditioning, Drivetrain AdBlue system: Yes Ffedpfx Asyibdxofnju Drive: Wheel Make of engine: DL06V Weights Empty weight: 18.500 kg Functional CE mark: yes Condition Technical condition: very good Visual appearance: very good Identification Serial number: DHKCEWCXCP5002429 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Aeolus Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 8,04x2,5x2,85 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: new, power: 116 kW (157.72 HP), fuel type: diesel, color: orange, Year of construction: 2025, operating hours: 10 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 22.200 kg Make of engine: DL06A Functional Bucket capacity: 0,92 m³ Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Emission level: Stage IIIA / Tier III Delivery terms: EXW Ffjdjyibbkopfx Afnju Transport dimensions (LxWxH): 9,5x3x3,2 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information CE marked - No CE Certificate available

Condition: used, Year of construction: 2018, operating hours: 18,042 h, Type of fuel: Diesel Empty weight: 13.225 kg Dimensions (LxBxH): 400 x 223 x 395 cm Lifting capacity: 9.000 kg Lift height: 510 cm Fork dimensions: 2.200 x 2.240 mm - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: FDB0X-2520-00262 - Operating hours: 18042 - Lifting capacity: 9000kg - Lifting height: 5100mm - Overhead clearance: 3950mm Fsdpfx Afjx I Np Ronjfu - Free lift: 0mm - Fork length: 2200mm - Maximum fork width: 2240mm - Minimum fork width: 530mm - Number of wheels: 6 Wheels - Attachment: Side-shift, Fork positioner - Options: Work lights, Radio, Camera, Full cabin, Heating - Mast: Duplex - Drive: Diesel - Motor brand: Doosan - Transport dimensions: 4000mm x 2230mm x 3950mm (l x w x h) - Transport weight [kg]: 13225kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, For sale: Lot of 4 Doosan CNC lathes. All 4 machines are identical and sold complete. Video available. Doosan Lathe Model: Puma 240 Control: Fanuc i Series CNC Year: 2008 Supplied with tooling With chip conveyor With documentation Doosan Puma Lathe Model: Puma 240 B Control: Fanuc i Series CNC Year: 2008 Supplied with tooling With chip conveyor With documentation Doosan Puma Lathe Model: Puma 240 B Control: Fanuc i Series CNC Year: 2008 Supplied with tooling With chip conveyor Ffodpfx Afeyh N Ivenou With documentation Doosan Lathe Model: Puma 240 Control: Fanuc i Series CNC Year: 2008 Supplied with tooling With chip conveyor With documentation

Condition: good (used), Year of construction: 2014, Traverses X Y Z; 762 x 516 570mm, Ffjdpjygkpnofx Afnou Table size 860 x 570mm, Table load 350 kgs, spindle power 18.5Kw, spindle speed 10,000 rpm, spindle taper BT40, 30 station ATC, Fanuc I control, through spindle coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2021, Traverses XYZ: 625 x 450 x 400mm, 500 x 450mm diameter table, Ffedpfxjygibis Afnou max table weight 400kg, maximum workpiece size 550mm dimeter x 450mm high, B axis table tilt +30°, -110°, C axis 360degrees, 18.5kW, 12000rpm, BT40, 30 station tool changer, Fanuc I series control, swarf conveyor,

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z; 1050 x 570 x 510mm, Table size 1300 x 570mm, min-max height spindle to table 150-660mm, Fedpfsygh U Uex Afnefu spindle speed 12,000rpm, 30 station ATC spindle taper BT40, spindle power 18.5 kW, Fanuc control, coolant, swarf conveyor and probe.

Condition: used, fuel type: electric, lifting height: 4,800 mm, Year of construction: 2014, operating hours: 6,250 h, Year of manufacture: 2014 Empty weight: 23.500 kg Fedjx Hgraspfx Afnefu Carrying capacity: 1.800 kg GVW: 25.300 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m