Doosan dx 300 lca for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5

plasma cutting ESAB COMBIREX DX 3000

Niederlangen, GermanyGermany dealership location
6338 km
2015
used
x-axis:2500 mm Hd28figbw y-axis:4000 mm z-axis:465 mm table height:700 mm laser capacity in Watt:ca. 3500 1459/5000 Plasma: according to plasma system m³ plasma GII 202 200 Ah Connection voltage: 203 V +/- 10% Frequnz: 50 Hz +/- 2% Temperature: 5 degrees to 45 degrees Celsius Relative humidity: 10% to 85% (no compensation) Dust protection: IP 54 Standards: EN 349, EN 614-1, EN 626-1, EN 953, EN 1037, EN 1088, EN 1760-3, EN 60204-1, EN 60974-1, EN 60974-7, EN 61496-1, EN ISO 12100, EN ISO 13... more
4
Gildemeister CTX 400 Support / claw grips / truss by a Doosan MobilBagger with a total weight of approx. 16 19to. The attachment is almost unused and was dismantled due to mounting a track landing gear immediately after the purchase of the excavator. It can be mounted instead of the space shield. The exact year of manufacture and the type of the baggers are not known. N83ymlcr More info on request more
6

Wheel excavator Doosan DX 165W-5

Sittard, NetherlandsNetherlands dealership location
6331 km
2018
used
Colour: Blue Field of application: Construction Be7q3wr2nt Drive: Wheel Power: 102 kW (139 HP Empty weight: 17.916 kg Make of engine: Perkins 1204F CE mark: yes Technical condition: very good EPA marked Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Transport dimensions (LxWxH): 7.94 x 2.49 x 3.1 Latest inspection: 5 more
14
Matriculation year: 01 / 2011 Mileage: 729.800 km EURO 5 / AdBlue green sticker HU NEW / AU NEW / SP NEW / batteries NEW!! Engine power: 217 kW / 295 HP Optitronic 6AS 1000 / automated manual transmission, optimized switching without loss of transformer sheet - / Luftgefedert Max. Total weight: 11,990 kg Max. Total train weight: 32,000 kg W2bu8 Laderaumma�e L x W x d: 7,250 x 2.490 x 2600 mm Loading Board wall 1,500 kg Trailer coupling foot with Luftanschlüssenq M - cab with... more
6

Horizontal Lathe DOOSAN PUMA300C

SueciaSweden
6642 km
2005
ready for operation (used)
Controller: FANUC 21i/TB Axis X-axis travel mm: 282 (82+200) Z-axis travel mm: 1,330 Rapid traverse X,Z mm/min: 20,000/24,000 Cutting feed mm/rev X,Z: 0,001 ¬¬– 500,000 Main spindel Spindle rpm: 28 – 2,800 Spindle drive power kW: 22 / 26 Chuck dia mm: 304 Turning dia max. over bed mm: 570 Spindle nose: A2-11 Spindle bore dia. mm: 115 Bearing dia. (Front) mm: 160 Turret Tool places number: 10 (Base holder) OD tool height mm: 25 Boring bar dia. mm: 40 Indexing time sec.: 0... more
3
Machine has 10,000 operating hours and is completely overhauled, 10,000 working ours * New control / new control * WSI WA-50 pump 3,800 bar, 50 HP * Net working travel area * Retrofittet * Delivery July * German services * German hotline * German technician * New SOFTWARE WATERCAD-CAM software with control * 300 kg. Steel Abrasive Pressurized tank Including training and installation WARRANTY 3 months + 1 year for the CNC (brand new) X 3000 mm Y 1600 mm Z 160 mm Overall table ... more
3
Screw vacuum pump - unused Manufacturer: Alcatel / Adixen Type: A 300 P Motor: 380-460V Status: Used; As good as new Warranty: 12 months Suction capacity: 320 m ³/h connection: ISO-K 63 Gpw0cbgda Discharge pressure: approx. 1, 2 x 10-2 mbar (ABS.) Includes: user manual more
6

CNC-LATHE DOOSAN DAEWOO PUMA 300 LC

Bienne, SwitzerlandSwitzerland dealership location
6604 km
2007
used
CNC-LATHE "DOOSAN" TYPE PUMA 300 LC Fanuc 21iTB - 10 posts turret - 3-jaws chuck - Srmxkbn9t tailstock - chips conveyor - workpiece feeler more
6

Crawler excavator Doosan DX 225 LC-5

Sittard, NetherlandsNetherlands dealership location
6331 km
2017
used
Colour: Orange Field of application: Construction Power: 124 kW (169 HP Empty weight: 22.100 kg Make of engine: DL06 CE mark: yes Serial number: V001 Nnmsf EPA marked Transport dimensions (LxWxH): 9.5 x 2.99 x 2.98 more
1

Mini excavator Doosan DX 27 Z

Obrigheim, GermanyGermany
6618 km
2013
good (used)
further on request Vsoe2u more


doosan dx ...
daily

New machines via email!

Stay updated!
2

Crawler excavator Doosan DX 235 LCR-5

Sittard, NetherlandsNetherlands dealership location
6331 km
2017
used
Field of application: Construction Twejaxc EPA marked more
2

Wheel excavator Doosan DX 165 W - 5

Sittard, NetherlandsNetherlands dealership location
6331 km
2017
used
Field of application: Construction Drive: Wheel Bbzijdb EPA marked more
4
Unused 2018 Doosan DX225LC 600mm Pads, CV, Piped c/w ROPS, Saftey Rails, Reverse Camera, A/C Vsqwgy This machine will be sold by Euro Auctions at an online only auction in Brisbane, Australia. Bidding closes 25th July at 4pm AEST. View full inventory online. more
4
2008 Mitsubishi Diamond 3000  6 + Coater  16,000 IPH.  28 x 40 inch six-color format Straight 6 color Dedicated tower coater  Full APC Autoplate closed loop color control Automatic blanket washers  Be7qh09rtn Impression cylinder washer  Remote Soft-Proofing at press High-speed continual feed with swing gripper infeed Paper presets – Automatic Sheet Size set up for infeed and delivery Automatic ink-up and ink Pre-sets Personal Computer Management Software for repeat data Baldwin ... more
6

CNC Machining Centre for Door Frames Comeva G300

Liverpool, United KingdomUnited Kingdom
5677 km
2018
good condition (used)
Maximum door frame length 3100mm Door frame height 25mm Door frame width 250mm Equipped with 4.5kw Twin entry router head x max 18,000rpm for mitre sawing and milling. Router head can be rotated for saw cutting 45 - 90 - 45 degrees Bfaib38i8c 5 x Support beams with pneumatic locking and workpiece clamps Year - February 2018 CE Compliant Condition - Very Good more
6

Guillotines / Shearing HACO TS 3006 3000mm x 6mm Guillotine

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
1989
ready for operation (used)
Serial No. 802398 Capacity 3050 X 6mm. Fwz3k0n Nett weight actual. 4,530 Kgs. / 4.5 Tons. more
2
Make Powtek-Gericke, Type NB 300x680 Nibbler, No NB 36100, Material Mild steel, Stainless steel, Granulating sieve "nibbler", Sieve sizes 700x300mm, Sieve perforation 3mm, Inlet +/- 600x220mm, Outlet +/- 700x400mm, Motor 5,5 KW , 380/660 Volt, Floor space 2,0x0,6 M, Total height 0,7 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines i... more
2

Bed type Correa Milling machine CORREA A30/30 - 6300807A30/30

Burgos, SpainSpain dealership location
6032 km
1998
ready for operation (used)
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-320 (¡NUEVO! / NEW!) Technical features Dimensions Table dimensions: 3500 x 1100 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 3000 mm Y axis traverse: 1200 mm Z axis traverse: 1000 mm Milling head Head type:... more
6
Vehicle data - make: Toyota - type: 8FBET16 / / HH 3,300 mm / FH 1.600 mm / duplex / Sideshift / container capable - drive type: electric - load capacity: 1600 kg - load Centre of gravity:-lifting height: 3300 mm - range: 0 mm - year: 2013 - operating hours n: 8327 - internal No.: E0506 _ Mast data - mast type: duplex - lifting height: 3300 mm - height: 2120 mm - free lift: 1600 mm - carriage: 0 mm - forks: 1400 x 0 x 0 mm _ Beilk7lgmd Dimensions - length: 0 mm - width: 0 mm - height: 212... more
15
We have a Buhrs W+D BB300 10K envelope inserting system available. This machine is built in 2007. Ju80li Year of built 2007 6 station base Configuration: Buhrs BB300 - 10K 6 station base 4 rotary feeders 1 HF3 vacuum friction feeder Divert bin Turn over belt Alignment table Mailtable (inkjet optional) Conveyor belt 2 camera Asentics More and other feeders possible. Reading camera's for matching optional! System is fully prepared for read&print Machine is ready for a dem... more
5

Hydr. pressbrake GWF-MENGELE H 300-3

Niederlangen, GermanyGermany dealership location
6338 km
1994
used
pressure:300 t chamfer lenght:3750 mm distance between columns:3050 mm stroke:300 mm table width:400 mm column arm:320 mm return speed:85 mm/sec working feed:10 mm/sec control:Cybelec DNC 70 total power requirement: kW weight of the machine ca.:30,0 t dimensions of the machine ca.:4,5 x 2,4 x 3,2 m quantity of oil:450 l Berwyvgxe0 - upper and lower tool - Hydraulic tool clamping more
15
Serial No. 96011991 Oolpph2n Cutting Length 4000 mm Cutting Width 2000 mm Thickness of Cut upto 35 mm Plasma Duty Cycle 300 amps Amperage 300 amps Input 415/3/50 Control HPC digital process Traverse speed 22 m/ min rapid. Cutting speed 0 - 10 m/ min Fitted with Nertajet HP300 plasma unit &, fume extraction unit Nett Weight actual. 6,200 Kgs / 6.10 Tons more
2
Make Pfaudler, Type BE 6300, No 131201, New 2005, Lining material Glass - Enamel (PPG), Reactor , Capacity 8190 Ltr, Dished bottom , Dished top side , Manhole dia.600mm, Top connections (2x) dia.250mm, (5x) dia.150mm, Outlet dia.150mm, Working pressure vacuum / 6 bar, Test pressure 7,7 bar, With jacket 795 Ltr, Working pressure vacuum / 6 bar, Test pressure 7,7 bar, Max. temperature -25 / 200 [...] With propellor stirrer , Motor 15 KW, 400 Volt (ex.), Mounted on legs , Floorspace 2,6x2,6 M, Tota... more
7

Bed type Correa Milling machine CORREA A30/40 - 6300110A30/40

Burgos, SpainSpain dealership location
6032 km
1993
ready for operation (used)
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-320 (¡NUEVO! / NEW!) Technical features Dimensions Table dimensions: 4500 x 1100 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mm Y axis traverse: 1200 mm Z axis traverse: 1500 mm Milling head Head type:... more
4

Center Lathe VDF BOEHRINGER DUE 630 x 3000

Mönchengladbach, GermanyGermany dealership location
6363 km
1990
used
turning diameter over bed:630 mm turning diameter over slide rest:385 mm Nm7lj turning length:3000 mm Height of centres:315 mm centre distance:3100 mm spindle bore:82 mm spindle drive motor:15 kW spindle turning speed range:9 - 1800 U/min total power requirement:18 kW weight of the machine ca.:6 t dimensions of the machine ca.:4,6 x 1,8 x 1,8 m Machine equiped with Digital Readout - 3-jaw chuck and chuck protection - 3 steady rests - PARAT tool holding system - chip conveyor, coolant attachmen... more
1
We have a Buhrs W+D BB300 10K envelope inserting system available. This machine is built in 2006. Year of built 2006 10 station base Configuration: Buhrs BB300 - 10K 10 station base 5 rotary feeders 1 HF3 vacuum friction feeder Bq777txg 1 shuttle lug feeder Divert bin Turn over belt Conveyor belt More and other feeders possible. Reading camera's for matching optional! System is fully prepared for read&print Machine will be arriving here in week 31 of 2019 more
6
Vehicle data - make: Linde - type: E18L-01 / / HH 3,300 mm / side-shift / fork positioner / good condition - drive type: electric - load capacity: 1800 kg - load Centre of gravity:-lifting height: 3300 mm - range: 0 mm - year: 2014 - hours of operation: 14386 internal No.: E0544 _ Mast data - mast type: standard - height: 3300 mm - height: 2150 mm - free lift: 0 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Zj0xjxml Dimensions - length: 0 mm - width: 0 mm - height: 2150 mm - weight: 3600... more
2

Guillotines / Shearing EDWARDS PEARSON VE 3000mm x 6mm Guillotine / Shear

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
1995
ready for operation (used)
Serial No. 95G439 Capacity 3070 mm x 6.5 mm Back gauge programmable Variable rake yes Work supports 2 @ 1400 mm Squaring arms 1 @ 1400 mm Input 415/3/50 9 kW Clamps 14 x hydraulic Read-out to back gauge metric Actuated via wander type foot switch Fitted with rear safety guard Length 12' 2" / 3.70m Be0s78lc8k Width 6' 8" / 2.03m Height 5' 8" ./ 1.73m Nett weight actual. 5,030 Kgs / 4.95 Tons more
2
Make Alexanderwerk, Type R-300, No 039-09709, New unknown, Material Stainless steel, Granulating sieve "Grater/shredder" (1x), Sieve sizes dia. 300x130mm, Sieve perforation dia. 10mm, Without hopper, Inlet dia. 270mm, Motor 3,6 KW, 230/400 Volt (Ex), Mounted on wheels , With switch , Floor space 1,1x1,2 M, Total height 1,3 M, Weight 340 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destinat... more
5
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-415 Technical features Dimensions Table dimensions: 2300 x 1000 mm Number of slots: 7 T slots dimensions: 18 mm Traverses of axis X axis traverse: 2.000 mm Y axis traverse: 1.000 mm Z axis traverse: 1.000 mm Be9ehdryf0 Milling head Head type: Uni... more
4
Vickers DBM-3A / CG1300 03 Frequency inverter, serial number according to photo, used, normal traces of use, 100% functional, supplied with photos Encylwj more
8
Max cutting length: 3040 mm Usehl9qk Max cutting thickness: 8 mm steel Controlled rear stop with Elgo P8511 up to 1000 mm Hydraulic shear angle adjustment Manual cutting gap adjustment Cutting length adjustable via potentiometer Safety light barriers Knife sharpened Operating instructions available Weight: approx. 8500 kg more
6
Vehicle data - make: BT - type: SWE 120 L / / 348 h / HH 3,300 mm / default / initial lift, good condition - drive type: electric - load capacity: 1200 kg - load Centre of gravity:-lifting height: 3300 mm - range: 0 mm - year: 2011 - operating hours: 348 Beilozkpqq -Internal No.: E0032 _ Mast data - mast type: standard - height: 3300 mm - height: 2130 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2130 mm - weight: 97... more
5

Guillotines / Shearing DURMAZLAR JDHGM3006 3100mm x 6mm Hydraulic Guillotine/Shear

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
1997
ready for operation (used)
Serial No. 607697669 Back gauge power Rapid blade adjustment yes Work supports 2 @ 920 mm Squaring arms 1 @ 920 mm Input 415/3/50 15 kW Nmykl Clamps 14 x hydraulic Read-out to back gauge metric Actuated via wander type foot switch Length 12' 2" / 3.70m Width 7' / 2.13m Height 6' 4" / 1.93m Nett weight actual. 5,630 Kgs / 5.54 Tons more
2
Material Stainless steel, Cooling belt "Rotoformer without cooling belt" (1x), Belt width /Suitable for belt width ± 300mm, With motor 1,3 KW, 220/380 Volt, With variable speed drive (± 0-353 Rpm), With jacket , 3x outer tube (2x 1,5mm + 1x 2,0mm), Floorspace 1,5x1,5 M, Total height 0,7 M, Weight 420 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to i... more
15

Bed type Correa Milling machine CORREA A30/50 - 6300905A30/50

Burgos, SpainSpain dealership location
6032 km
1998
ready for operation (used)
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-530 (¡NUEVO! / NEW!) Technical features Dimensions Table dimensions: 5000 x 1100 mm Number of T slots: 8 Be9ejp2fgc T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mm Y axis traverse: 1200 mm Z axis traverse: 1500 mm   ... more
3
Straightening and welding plate steel solid material Length 1300 mm Width: 1000 mm 135 mm thick Working height 820 mm -Metal substructure Weight approx. 1400 kg good surface 20sybv more
6

9-axis CNC-controlled HM chalk saw grinding machine Vollmer CM 300

Cloppenburg, GermanyGermany dealership location
6393 km
2015
ready for operation (used)
Description: Suitable for automatic grinding of HM chalk leaves on the chest and back in a tension. All known tooth geometries (flat, alternating, trapepeze, etc.) can be ground automatically and in one pass. Technical data: 9 CNC controlled axles, saw blade diameter 500 – 1440 mm, Drilling diameter from 16 mm, leaf thickness up to 15 mm,, toothing from 6 – 180 mm, cutting length up to 25 mm, chip angle from-35 ° to + 20 °, free angle from 0 °-25 °, slanting cut on the back of the tooth up to 4... more
5

screw compressor KAESER CSDX 137 T

Niederlangen, GermanyGermany dealership location
6338 km
used
feed pressure:13 bar liter capacity:9,88 m³/min operating pressure:15 bar Speed:2978 min-1 rated capacity:75 kVA 2er8g8c weight of the machine ca.:2,3 t dimensions of the machine ca.:2,6 x 1,3 x 2,1 m Operating hours: less than 100 hours more
2
Make KEK Kemutec Powder Technology, Type Betagrind mill, New unknown, Material Stainless steel, Conical granulating sieve (1x), Rotor sizes dia. 310x255mm, Sieve is missing, Inlet dia. 250mm, Outlet dia. 250mm, Motor , With variable speed drive , With switch , Floor space 1,6x1,0 M, Total height 1,7 M, Weight 650 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are w... more
3
Retrofitted: 2019 Numerical control: FANUC 21iM Technical features Dimensions Table dimensions: 3600 x 1000 mm Number of T slots: 7 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2700 mm Y axis traverse: 1200 mm Z axis traverse: 1460 mm Milling head Head type: Multiangular 45º - Autom... more
8

Shredder Vecoplan VAZ 1300 M

Stuhr bei Bremen, GermanyGermany
6426 km
2008
good (used)
Shredder Vecoplan for recyclable fractions, type VAZ 1300 M, constructed 2008, drive power 55 KW, Inlet width of 1300 mm, with new bearings, rotor and tools (knives) Technical specification: Manufacturer: Vecoplan Maschinenfabrik, Bad Marienberg Type: VAZ 1300 M Nnlm9 Year of construction: 2008 Motor nominal power: 55 kW Inlet width: 1300 mm Diameter of rotor: 370 mm (circle of rotation) Rotor width: 1305 mm Rotor revolution speed: 162 min־¹ Number of tools: 60 Number of sieves: ... more
6

HM flank grinder (CNC controlled) Vollmer CMF 300

Cloppenburg, GermanyGermany dealership location
6393 km
2015
ready for operation (used)
Description: Suitable for automatic, two-sided tooth flank cut on hard metal stove blades. Technical data: 9 CNC controlled axes, Sawdust diameter without robot 500 to 1440 mm, circular sag drilling diameter from 16 mm, tooth-laying 6 to 180 mm, grinding path up to 25 mm, chip angle from-35 to + 35 °, tangential angle from 0 to 10 °, grinding disc diameter max. 125 mm, Drilling diameter 32 mm, Grinding spindle variable 1600-5500 U/Min, connection value 8.5 kVA/400V/50 Hz, dimensions B x T x H =... more
9
Make: LVD Type: PPI 135/30 Built: 1991 Power: 135 t Bend length: 3050 mm Engine power: 10.5 kW Weight: approx. 6,500 kg Tools: 1 OW complete 1 sub-tool approx. V12 1 block matrices approx. 2m Umlos9m8 All information without information. A preliminary tour is possible at any time in our exhibition hall. more
15
Capacity Driver 150 tons, Idler 150 tons = 300 tons total Work piece diameter Minimum 1000 mm - Maximum 8000 mm Tyre width 203 mm Gfwxed9 Input 400 / 3 /50 Fitted with Mechanical anti - creep facility Features Rotation speed 75 - 1500 mm per minute Length Driver 4200 mm Idler 4000 mm Width 1550 mm 1050 mm Height 1414 mm 1414 mm Nett weight approx. 17000kgs more
2
Make LB Bohle, Type PRS-300, No 9604078002, New 1996, Material Stainless steel, Granulating sieve "Grater/shredder" (1x), Sieve sizes dia. 300x150mm, Sieve perforation ± dia. 3mm, With hopper , Inlet dia. 250mm, Outlet dia. 290mm, Motor 400 Volt, 16A, With variable speed drive (frequency inverter), Speed 0-208 Rpm, Mounted on wheels , With switchgear , Floor space 1,8x1,1 M, Total height 2,0 M, Weight 550 KG What you can expect from Foeth: all our machines are in working condition, and at a red... more
4
Baumüller BUS21 30 / 60-30-001 AC 0-200 V, 30 A, 0-300 Hz, built-in power converter unit to the Bills and set the same serial number according to the photo, good condition, 100% used functional, included with com. photos Be92jkchxh more
8

Book block processing / book SIGLOCH SB 3000 Line

Espelkamp, GermanyGermany dealership location
6446 km
2000
ready for operation (used)
Book block production line - consisting of:KOLBUS import system- storage roller conveyor with stop-de-stacking FS. A with accelerating roller transfer belt with stopSIGLOCH attachment machine VAM- import belt AB- Cold glue nozzle glue system HHSSIGLOCH Book back glue and felling machine SB 3000- feeder channel for manual system- 1x glue station with cold glue IR heating Fälzelan glue station with cold glue- fälzelanform and friction stationSIGLOCH / RAU Dry conveyor line - Length: approx. 20 met... more
6
Vehicle data - make: BT - type: TSE 300 / / 1293 STD control position for fast a and exit - drive type: electric - load capacity: 3000 kg - load Centre of gravity:-lifting height: 0 mm - range: 0 mm - year: 2011 - operating hours: 1293 - internal No.: A0362 _ B3s2wul Mast data - mast type:-lifting height: 0 mm - height: 1650 mm - free lift: 0 mm - carriage: 0 mm - forks: 0 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 1650 mm - weight: 1750 kg _ Battery & charger - ba... more


doosan dx ...
daily

New machines via email!

Stay updated!

to

to

Edit search
DOOSAN DX 300 LCA
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.